IFrame is reloaded on every action

Hello,
I need to embed external applications on IFrames and show or hide them at runtime. I have the problem that an IFrame reloads the source every time I go to server.
Is there any way to set the IFrame to "not reload"?
I'll appreciate any answer.
Best regards,
Diego.

As far as I know there is unfortunately no way to prevent IFrames from reloading on every trip to the server.
Web Dynpro does support the embedding of external applications at present, apart from some predefined ones (eg. Microsoft Office, with the IWDOfficeControl).
Walter

Similar Messages

I don't want my flash menu to reload on every page

Hi everyone,
I have a website that I am working on where I have a menu
made in flash, the menu expands when you select a category item and
executes a hyperlink when you click on a particular item within the
category.
This hyperlink load a new page and reloads the flash menu
which causes the option pre-selected to get lost and you have to
select again the category item and item over an over again.
It is good to mention that I want to stay away from Frameset.
Is there a way to load a particular part of the site instead
of the while site, so my menu selection stays the same?
I read about <DIV ID=", BASE, REL and REV and they don't
seem to work for me. Is there a sample code that I can look at to
have better understanding of it?
Thank you in advance.

A good way to make it so it does not reload on every page is
to make a IFrame and make the target link of the flash buttons go
to the Iframe ("
http://staggdesigns.com" ,
"_TARGETFRAME") that will work

Yosemite slow, spinning beach ball at every action

Description du problème :
Yosemite worked well for a month or more, until yesterday. I used for the first time a flight simulator downloaded from appstore (for 30 minutes), i don't even know why i did that. After that mbp was really hot. At next start mbp was very slow showing spinningball beach ball at every action (typing, opening folders). I deleted the app, but no improvement was shown. after that i noted there was 10.10.2 upgrade (i had 10.10.1). no improvement. I thought i had to clean a little bit so i downloaded adwaremedic, which found an adware and eliminated it. still no improvement. I finally looked up on support.apple and found plenty of people with this problem and followed intructions: deleted all third party and cleaning programs (fan control and flip4mac wont disappear from system preferences, how to be sure if i uninstalled them right?). anyway still no improvement.
I followed thisguide (Guide: How to solve Yosemite memory leaks and CPU usage) but i'm not sure if i managed to reset smc, as my left **** key doesn't work (i used the right one). still no improvement.
I was thinking about using clamxav (I've read it's the less invasive) to scan the mbp, is it a good idea or not?
might dropbox be a problem (after quitting it, if i try to delete it, it says it's not possible because plugins are in use!)
should i reinstall yosemite? if yes, is it necessary to do a backup?
Please help me. thank you
EtreCheck version: 2.1.7 (114)
Report generated 30 gennaio 2015 10:24:09 CET
Télécharger EtreCheck à http://etresoft.com/etrecheck
Cliquez sur les liens [Aide] pour l’assistance avec les produits non-Apple.
Cliquez sur les liens [Détails] pour plus d'informations sur cette ligne.
Cliquez sur les liens [Adware] pour l’assistance avec la suppression d’adware.
Informations matérielles : ℹ️
MacBook Pro (13 pouces, mi-2012) (Caractéristiques techniques)
MacBook Pro - modèle : MacBookPro9,2
1 2.5 GHz Intel Core i5 CPU : 2-core
4 GB RAM Extensible
BANK 0/DIMM0
2 GB DDR3 1600 MHz ok
BANK 1/DIMM0
2 GB DDR3 1600 MHz ok
Bluetooth: Bon - Handoff/Airdrop2 disponible
Wireless: en1: 802.11 a/b/g/n
La santé de la batterie : Normal - Comptage de cycles 890
Informations vidéo : ℹ️
Intel HD Graphics 4000
Color LCD 1280 x 800
Logiciel du système : ℹ️
OS X 10.10.2 (14C109) - Temps depuis le démarrage : 0:23:52
Informations des disques : ℹ️
Samsung SSD 840 Series disk0 : (500.11 GB)
EFI (disk0s1) <non monté> : 210 Mo
Recovery HD (disk0s3) <non monté> [Restauration] : 650 Mo
iRod SSD (disk1) / : 498.88 Go (154.97 Go libre)
Core Storage: disk0s2 499.25 Go Online
OPTIARC DVD RW AD-5970H
Informations USB : ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Informations Thunderbolt : ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper : ℹ️
Mac App Store et développeurs identifiés
Agents de lancement : ℹ️
[désengagé] com.adobe.AAM.Updater-1.0.plist [Aide]
[engagé] com.oracle.java.Java-Updater.plist [Aide]
[engagé] org.macosforge.xquartz.startx.plist [Aide]
Daemons de lancements : ℹ️
[engagé] com.adobe.fpsaud.plist [Aide]
[engagé] com.microsoft.office.licensing.helper.plist [Aide]
[engagé] com.oracle.java.Helper-Tool.plist [Aide]
[engagé] com.oracle.java.JavaUpdateHelper.plist [Aide]
[engagé] com.skype.skypeinstaller.plist [Aide]
[engagé] org.macosforge.xquartz.privileged_startx.plist [Aide]
Éléments Ouverture : ℹ️
iTunesHelper Applicazione (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Plug-ins internets : ℹ️
MeetingJoinPlugin : Version : Inconnu - SDK 10.6 [Aide]
FlashPlayer-10.6 : Version : 16.0.0.296 - SDK 10.6 [Aide]
Default Browser : Version : 600 - SDK 10.10
AdobePDFViewerNPAPI : Version : 11.0.09 - SDK 10.6 [Aide]
AdobePDFViewer : Version : 11.0.09 - SDK 10.6 [Aide]
Flash Player : Version : 16.0.0.296 - SDK 10.6 [Aide]
QuickTime Plugin : Version : 7.7.3
SharePointBrowserPlugin : Version : 14.4.7 - SDK 10.6 [Aide]
Silverlight : Version : 5.1.20913.0 - SDK 10.6 [Aide]
DirectorShockwave : Version : 12.0.3r133 - SDK 10.6 [Aide]
JavaAppletPlugin : Version : Java 8 Update 31 Vérifier la version
Panneaux de préférences tiers : ℹ️
Fan Control [Aide]
Flash Player [Aide]
Flip4Mac WMV [Aide]
Java [Aide]
Time Machine : ℹ️
Time Machine n’est pas configuré !
L’utilisation du CPU par processus : ℹ️
13% mds
4% WindowServer
1% fontd
0% ocspd
0% AppleSpell
L’utilisation de la RAM par processus : ℹ️
571 Mo com.apple.SpeechRecognitionCore.speechrecognitiond
77 Mo installd
56 Mo WindowServer
52 Mo Finder
52 Mo mds_stores
Informations de la mémoire virtuelle : ℹ️
80 Mo RAM Disponible
1.54 Go RAM Active
1.47 Go RAM Inactive
692 Mo RAM Résidente
2.16 Go Pages entrants
422 Ko Sorties pages
Informations du diagnostic : ℹ️
Jan 30, 2015, 10:01:49 AM Examen de soi - succès
Jan 29, 2015, 02:45:34 PM /Library/Logs/DiagnosticReports/Messages_2015-01-29-144534_[expurgé].hang
Jan 29, 2015, 02:34:07 PM /Library/Logs/DiagnosticReports/firefox_2015-01-29-143407_[expurgé].hang
Jan 29, 2015, 02:09:44 PM /Users/[expurgé]/Library/Logs/DiagnosticReports/SMART Utility_2015-01-29-140944_[expurgé].crash
Jan 28, 2015, 08:29:11 PM /Library/Logs/DiagnosticReports/firefox_2015-01-28-202911_[expurgé].hang
Jan 28, 2015, 08:28:25 PM /Users/[expurgé]/Library/Logs/DiagnosticReports/plugin-container_2015-01-28-202 825_[expurgé].crash
Jan 27, 2015, 10:39:18 PM /Users/[expurgé]/Library/Logs/DiagnosticReports/Skype_2015-01-27-223918_[expurg é].crash
Jan 27, 2015, 04:44:42 PM /Library/Logs/DiagnosticReports/firefox_2015-01-27-164442_[expurgé].hang
Jan 27, 2015, 03:41:23 PM /Library/Logs/DiagnosticReports/storeaccountd_2015-01-27-154123_[expurgé].cpu_r esource.diag [Détails]

When you see the beachball, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

I have a project in Final cut pro 10.5 and the spinning icon appears with every action and each action takes up to 30 seconds to respond to?

I have a project in Final cut pro 10.5 and every action takes up to 30 seconds for the program to respond . The spinning icon stays up during this time?

Are you using Mavericks. If so you should update FCPX

Every action in CSC (ATG 11.1) getting XMLTransform Exception

Every action in CSC, I am getting following exception.
/atg/dynamo/droplet/xml/XMLTransform Error transforming XML document: Invalid to flush BodyContent: no backing stream behind it. javax.xml.transform.TransformerException: Invalid to flush BodyContent: no backing stream behind it.
/atg/dynamo/droplet/xml/XMLTransform at com.sun.org.apache.xalan.internal.xsltc.trax.TransformerImpl.postErrorToListener(TransformerImpl.java:792)
/atg/dynamo/droplet/xml/XMLTransform at com.sun.org.apache.xalan.internal.xsltc.trax.TransformerImpl.transform(TransformerImpl.java:738)
/atg/dynamo/droplet/xml/XMLTransform at com.sun.org.apache.xalan.internal.xsltc.trax.TransformerImpl.transform(TransformerImpl.java:340)
/atg/dynamo/droplet/xml/XMLTransform at atg.xml.tools.XSLProcessorImpl.process(XSLProcessorImpl.java:595)
/atg/dynamo/droplet/xml/XMLTransform at atg.xml.tools.XSLProcessorImpl.process(XSLProcessorImpl.java:334)
/atg/dynamo/droplet/xml/XMLTransform at atg.droplet.xml.XMLTransform.doStreamTransform(XMLTransform.java:996)
/atg/dynamo/droplet/xml/XMLTransform at atg.droplet.xml.XMLTransform.processXSLTemplate(XMLTransform.java:799)
/atg/dynamo/droplet/xml/XMLTransform at atg.droplet.xml.XMLTransform.service(XMLTransform.java:679)
/atg/dynamo/droplet/xml/XMLTransform at atg.servlet.DynamoServlet.service(DynamoServlet.java:152)
Am I missing anything?
Thanks

They go away if you set the ‘useDebugPanelStackMode’ to false in the /atg/svc/agent/ui/AgentUIConfiguration.properties file.
Probably an issue with the 'flush' in 'WebLogic'.

Firefox 4 hangs a little on every action - typing, moving the window, selecting a menu item, selecting a tab, ...

Since installing Firefox 4 RC2, and now Firefox 4, Firefox constantly hangs on every action. Just in typing this message, the program pauses for a second or two every few words. Opening a tab, selecting a menu item or even moving the Firefox window incurs a brief pause of a second or two. This makes the users experience terribly slow. I've tried turning off sync and starting Firefox with extensions disabled. Nothing seems to help. I upgraded from RC2 but then deleted and reinstalled Firefox.
I'm having this problem on my MacBook Pro, which is pretty new (less than a year old) and otherwise very fast (i.e., i7 processor and 8Gb RAM). I have the newest version of OS X (10.6.7) and have updated all extensions.
I've watched my system monitor and Firefox is constantly and repeatedly going from low to near 100% CPU use every few seconds. I have no special, unusual settings (I've gone through preferences).
This is getting so bad that I'm about ready to abandon FireFox. Any suggestions would be helpful.

I had the same problem, I kept searching and found this:
[http://forums.mozillazine.org/viewtopic.php?f=38&t=580592&start=0 http://forums.mozillazine.org/viewtopic.php?f=38&t=580592&start=0]
Which says to delete your sessionstore.js from your profile. It seems to have worked so far on my macbook pro.
If you're concerned about losing the file rename it first, here's a description about what the file does:
[http://kb.mozillazine.org/Session_Restore http://kb.mozillazine.org/Session_Restore]
Do all this with Firefox CLOSED.
Hopefully this helps others!

My iphone 4 is saying every action. when we touch enything it repeats that action. and it is not unloking. and not shutdown.

my iphone 4 is saying every action. when we touch enything it repeats that action. and it is not unloking. and not shutdown.

Check your acessiblity settings, is voiceover turned on?
Settings > General > Acessibility > Voice Over

Why do I have to reload page every few minutes?

Why do I have to reload page every few minutes?

What app are you using?
Why are you reloading the page? What is the problem that forces you to reload the page?
A picture of the page might be helpful.
How to show us a screen image. Avoid personal identification.
command + shift + 3 Will take entire screen. You hear a click.
command + shift + 4 Lets you decide what to take. Mouse pointer changes. Move mouse to upper left corner of desire image. Hold down left mouse key where to start image. Drag mouse to lower left of where you want to stop image. Release mouse.
You will get a picture n.png file on the desktop.
On the forum input panel you will see the camera icon.
click on camera icon.
another window will appear.
Make sure you have selected the from your computer tab.
click on Browse button
An open file panel appears. Select the file.
After selection a file, I have this screen showing.
You will have to click on Insert Image. You may have to scroll down to see Insert Image button.

My iMac suddenly started running slow. almost every action invokes the color wheel

my imac suddenly started acting very choppy. streaming internet music works normal. every action requires a delayed response. sometimes 30 sec before it starts the command. i have not downloaded any programs in months. my imac is running OS x 10.8.2 with 4GB ram.my HDD has 65Gb free space. ext HDD has 248GB free space. i do not use any virus programs.

Hello, see how many of these you can answer...
See if the Disk is issuing any S.M.A.R.T errors in Disk Utility...
http://support.apple.com/kb/PH7029
Open Activity Monitor in Applications>Utilities, select All Processes & sort on CPU%, any indications there?
Open Console in Utilities & see if there are any clues or repeating messages when this happens.
In the Memory tab of Activity Monitor, are there a lot of Pageouts?
One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
Reboot, test again.
If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or some USB or Firewire device, or 3rd party add-on, Check System Preferences>Accounts>Login Items window to see if it or something relevant is listed.
Check the System Preferences>Other Row, for 3rd party Pref Panes.
Also look in these if they exist, some are invisible...
/private/var/run/StartupItems
/Library/StartupItems
/System/Library/StartupItems
/System/Library/LaunchDaemons
/Library/LaunchDaemons

Outlook 2013 running on Parallels micro-freezes with every action

Hi there,
I am experiencing an issue with Outlook 2013 that is having a massive detrimental effect on my productivity. I have tried a number of different fixes but the issue keeps returning.
Symptoms are that I get a micro freeze and a blue spinning wheel on almost every action I take including opening emails, replying to emails, clicking on a flag, pretty much anything. The freeze lasts for about 5-10 seconds.
- I have used 1GB of my 2GB capacity so mailbox is not overloaded.
- I am running Parallels Version 10.1.3 on a Macbook Air (mid-2011) with 4GB Ram, 1.6GHz Intel Core i5 and Yosemite 10.10
- I don't have excessive programs running which would be chewing RAM.
- Other programs including other Office programs (OneNote, Word, Excel) are responding just fine, it's just Outlook.
This has been a recurring problem. I have tried fixing by:
- Deleting and archiving folders to minimise size of mail boxes
- Removing all subfolders from the inbox to separately contained folders in the general mailbox instead
- Resetting the .OST file
- Restarting both Windows (Parallels) and Mac. (This actually does work for a while, about a day, then problem returns)
- Disabling all outlook extensions
- Disabling graphics acceleration in Outlook advanced options
There have been a number of threads on this topic, which I have read, but the answers tend to include suggestions for all sorts of remedies making it difficult to get a definitive fix. Surely others must have experienced a similar problem, and have tried
all the usual suggested fixes, yet still have the problem? I suspect the problem may be related to something specific to running Office on Parallels?
I am hoping that someone will be able to please give an enlightened answer, or a suggestion that will provide a fix or workaround, because my productivity is declining rapidly having to wait 6-10 seconds for each email, when typically I send scores of emails
every day and speed is of the essence. I would even appreciate an honest response along the lines of "This is a common problem with Outlook on Parallels computers and there is no definitive answer" as this will allow me to move on and start using
a different program.
Thanks in advance!

Hi,
Do you test with an Exchange account? If yes, Switch to Exchange Online Mode, can you send/receive emails properly?
Please create a new Send/Receive group in Outlook and check if it helps:
Click File, and then clickOptions.
Click the Advanced tab.
In the Send and Recieve section, clickSend/Recieve.
Under Group Name, click the group, and then clickCopy.
Under Send/Receive Group Name, type the new group name, and then clickOK.
Under Group Name, click the old group name.
Under both When Outlook is Online andWhen Outlook is Offline, click to clear the check box forInclude this
group in Send/Receive (F9).
Click Close.
Quit Outlook, and then restart Outlook.
If the above step fails, create a new profile for Outlook and check if the issue occurs in there:
http://support.microsoft.com/kb/829918
Thanks,
Melon Chen
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

Some movies on iPad are removed and reloaded with every sync.

Recently some, only some, of my movies already loaded on my various iDevices are removing themselves, then reloading on every sync. (Note: "Movies" is a loose term herein, it includes all video forms; Home Video, TV, Movies....)
In attempts to fix this situation, I have;
Talked to the local Apple Store Personnel 3x, no one knows what is wrong.
Talked with Sr. Apple Advisor who did not know what was wrong, he escalated the issue to Apple Engineering on 6/20/14. (Sr. Advisor has been called back regarding this ticket 3-4x, has only returned my call the first time to advise he is still waiting on Engineering.... Sorry, but this time line is getting really bad without a response from Sr. or Engineering. What is going on with Customer Care? Added Frustration.)
Apple Engineering does not apparently know what to do, as there has been no response in 2 months.
Giving up on the above 3 bullets, I have;
Deleted/Re-downloaded offending movies.
Removed/Reinstalled iTunes App on MacBook.
Removed iTunes App and all of its' extra "strands" on MacBook, the reinstalled iTunes from Apple.
Created an external iTunes Media folder, pointed iTunes to that folder, then downloaded movies to that location.
Searched the web relentlessly to find someone else with reference to this issue.
All of the above has not corrected the situation. The movies in question are random, some purchased 1+ years ago, some purchased 1 month ago. I have to think this is an iTunes issue since this issue is reflected on all of my devices.
Any advice is appreciated.
Thank you.
MacBook Pro Late 2008: OS 10.9.4
iTunes 11.3.1(2) 64 Bit
iPad2: iOS 7.1.2
iPhone4: iOS 7.1.2
iPhone5s: iOS 7.1.2

iTunes does not stream.
You are downloading the video.
After a sufficient amount has downloaded, you can begin watching it.

Why does Siri keeps talking with every action I take on the iphone?

Why does Siri keeps talking with every action I take on the iphone?

Settings > General > Accessibility > Speak Selection > switch off here

How do I to turn off the voice helper that describes every action

Apparently I did something that brings up a voice helper & describes every action & button that i scroll on. I would like to turn that off but can figure it out. HELP!!

With Voice Over, you highlight whatever you are trying to select and then double tap anywhere on the screen to select.
So for your password of 1234 you have to
"Highlight 1, then double tap the screen, Highlight 2, the double tap the screen,... etc."
In order to remove you have 2 options:
Option# 1 – Turn off Voice Over
Go to setting by, highlight "SETTING
Double tap screen to go into settings
Use 3 fingers to (swipe) scroll of down and highlight "GENERAL"
Double tap screen to go into general
Use 3 fingers to (swipe) scroll of down and then highlight “ACCESSIBILITY”
Double tap screen to go into accessibility
Once you are in make sure that EVERYTHING in that section are shown as “OFF”
Option #2 - Reset your Phone
Go to setting by, highlight "SETTING
Double tap screen to go into settings
Use 3 fingers to (swipe) scroll of down and highlight "GENERAL"
Double tap screen to go into general
Use 3 fingers to (swipe) scroll of down and then highlight “RESET”
Double tap screen to go into reset
Select “Reset all setting” and continue to follow the instruction
(When you reset, all of your data and music WILL NOT erase. So don’t worry about that)
Hope this helps.
- Hugo

HT1689 How do you keep pictures from reloading with every sync

How do you keep pictures from reloading with every sync

What do mean by reloading? Once you sync the photos to the iPad they should not sync again. Is that what you are seeing? The progress bar is showing that the photos are being transferred all over again?

How can i make firefox reload automaticly every hour?!!!

how can i make firefox reload automaticly every hour?!!!
I download add-ons Reload Every
how to manage it((setting))?!!!
thanks addvance>>

You installed the ReloadEvery Extension rather and not downloaded it to disk.
To set the reload time for the tab you are viewing you can right-click the page and select a time.
http://reloadevery.mozdev.org/
http://reloadevery.mozdev.org/screenshots.html

IFrame is reloaded on every action

Similar Messages

Maybe you are looking for