IFS Document_ID from iFS Tables

iFS Document_ID from iFS Tables
1. How to get the document_ID if you know the directory path and the file_name that is stored in iFS?
2. How to get the directory path and file name from within iFS if you have the document_ID?
ifs_folder_items does not keep the whole path of the file.
Thanks
Bala

Could you be little more specific. So there are no DB views that I can write selects against? If so I need to call these Java methods in my DB Procedures?
Thanks

Similar Messages

From which table ,i ll get both the invoice and cleared amount ???

Hi Friends,
i am making a report for my sales client where finance part is also required.
the requirement is : the sales people want know the status of the invoice generated at their end.the report shud be like if they enter the invoice no,fiscal year and coustomer they will be able to see the status of the invoice.how much pmt has received for that particular invoice,wheather it is open or fully cleared?
From which table i can get both invoice no. and the payment/pmts rerceived against that invoce/invoices.
plz guide.
Regards,
Biswa

Hi,
SAP Standard Report itself covers all the requirements mentioned. With FBL5N, we get to know how much has been invoiced, paid and cleared and how much advance has been paid by customer etc., in one screen. Apart from this we have also all signs which show, which all invoices are due, overdue and its easy to analyse as well.
Was this requirement given by client after seeing this standard report?
Hope this info is helpful.
Regards,
Venkat

Reg:How to delete the column in table control also from database table.

Hi Experts,
Once again thank u all for giving the responses.
one more doubt is how to delete the columns of table control and also the record shold delete from ztable.
With Regards,
Saroja.P.

Hi,
If you want to delete the rows in the table control and simultaneously delete it from the database table, then you can implement a 'DELETE' functionality specific to your table control. Have a MARK field (you will find that in the screen attributes of the table control -> give a name for the MARK field, you will find an additional MARK column at the beginning of your table control). You can check whatever rows you want to delete from the table control, call the delete module.
"This portion of code inside the LOOP...ENDLOOP.
IF sy-ucomm eq 'F_DELETE'.
gt_itab2-check = mark. " Store the MARK field status into your internal table's correspoding field 'check'
MODIFY gt_itab INDEX tabcontrol-current_line.
ENDIF.
iF sy-ucomm eq 'DELETE1'.
DELETE gt_itab WHERE check eq 'X'. "Your internal table does not have rows that you want to delete
ENDIF.
Now you can modify your database table using the MODIFY statement.
MODIFY ZDB FROM TABLE gt_itab.

Adding Data From One Table to Another

Now, this doesn't strike me as a particularly complex problem, but I've either strayed outside the domain of Numbers or I'm just not looking at the problem from the right angle. In any case, I'm sure you guys can offer some insight.
What I'm trying to do is, essentially, move data from one table to another. One table is a calendar, a simple two column 'date/task to be completed' affair, the other is a schedule of jogging workouts, i.e, times, distances. Basically, I'm trying to create a formula that copies data from the second table onto the first but only for odd days of the week, excepting Sundays (and assuming Monday as the start of the week). Now, this isn't the hard part, I can do that. The problem comes when I replicate the formula down the calendar. Even on the days when the 'if' statement identifies it as an 'even day', the cell reference to the appropriate workout on the second table is incremented, so when it comes to the next 'odd day', it has skipped a workout.
I can't seem to see any way of getting it to specifically copy the NEXT line in the second table, and not the corresponding line.
This began as a distraction to try and organise my running so I could see at a glance what I had to do that day and track my progress, but now it's turned into an obsession. SURELY there's a solution?
Cheers.

Hi Sealatron,
Welcome to Apple Discussions and the Numbers '09 forum.
Several possible ways to move the data occur to me, but the devil's in the details of how the data is currently arranged.
Is it
• a list of three workouts, one for each of Monday, Wednesday and Friday, then the same three repeated the following week?
• an open-ended list that does not repeat?
• something else?
Regards,
Barry

How to dynamically display the data from a table base on row selection of another table in ADF

Hi ,
I have a requirement in ADF. I need to change the data of a table based on row selection of another Table . Both the table have a Parent Child relationship between them. They have a common attribute say department_id.
                                                                                     For this I created bind variable in view object of employees table and wrote a where clause in the sql query using that bind variable. Then I created method for selection listener of department Table in java bean.
My method is following
    public void onrowselection(SelectionEvent selectionEvent) {
        RichTable richTable = (RichTable)selectionEvent.getSource();
                        CollectionModel tableModel = (CollectionModel)richTable.getValue();
                        JUCtrlHierBinding adfTableBinding = (JUCtrlHierBinding)tableModel.getWrappedData();
                        Object selectedRowData = richTable.getSelectedRowData();
                        JUCtrlHierNodeBinding nodeBinding = (JUCtrlHierNodeBinding)selectedRowData;
                oracle.jbo.domain.Number newVal = (oracle.jbo.domain.Number) nodeBinding.getAttribute("DepartmentId");
                Number pallet = newVal.bigDecimalValue();
                System.out.println("Selected values " + pallet);
        BindingContext bindingctx = BindingContext.getCurrent();
                      BindingContainer bindings = bindingctx.getCurrentBindingsEntry();
                      DCBindingContainer bindingsImpl = (DCBindingContainer) bindings;
              DCIteratorBinding dciter = bindingsImpl.findIteratorBinding("EmployeesView1Iterator");//access the iterator by its ID value in the PageDef file
                      ViewObject vo =dciter.getViewObject();
                      vo.setNamedWhereClauseParam("DepartmentId", pallet);//enter your value
                      vo.executeQuery();
It is printing the selected value of department id from department table in the log. But it is not able to pass the value to employees view. It is showing the following error in the log
"Definition DepartmentId of type Variable is not found in EmployeesView1."
I will be very thankful if someone helps me to solve this errror or is there any other way to achieve the same requirement.
Thanks
Nilesh

Note quite sure why you simply wont create a viewlink for the viewobject the tables are based on..
The viewlink attribute will be based on the departmentId and it's a simple master detail relationship which automatically uses ppr.
However, if both tables are on the same page; using your hack about;
On the underlying viewobject, define a viewcriteria e.g. "listById" and set your bind variable here.
I would bind table two to a RichTable component:
RichTable t2;
public void onrowselection(SelectionEvent selectionEvent) {
        RichTable richTable = (RichTable)selectionEvent.getSource();
                        CollectionModel tableModel = (CollectionModel)richTable.getValue();
                        JUCtrlHierBinding adfTableBinding = (JUCtrlHierBinding)tableModel.getWrappedData();
                        Object selectedRowData = richTable.getSelectedRowData();
                        JUCtrlHierNodeBinding nodeBinding = (JUCtrlHierNodeBinding)selectedRowData;
                oracle.jbo.domain.Number newVal = (oracle.jbo.domain.Number) nodeBinding.getAttribute("DepartmentId");
                Number pallet = newVal.bigDecimalValue();
                System.out.println("Selected values " + pallet);
               refreshTable2(pallet);
        BindingContext bindingctx = BindingContext.getCurrent();
                      BindingContainer bindings = bindingctx.getCurrentBindingsEntry();
                      DCBindingContainer bindingsImpl = (DCBindingContainer) bindings;
              DCIteratorBinding dciter = bindingsImpl.findIteratorBinding("EmployeesView1Iterator");//access the iterator by its ID value in the PageDef file
                      ViewObject vo =dciter.getViewObject();
                      vo.setNamedWhereClauseParam("DepartmentId", pallet);//enter your value
                      vo.executeQuery();
private void refreshTable2(Number pallet){
RichTable x=getT2();
CollectionModel cm=(CollectionModel)x.getValue();
JUCtrlHierBinding jcb=(JUCtrlHierBinding)cm.getWrappedData();
BindingContainer bindings = bindingctx.getCurrentBindingsEntry();
DCBindingContainer bindingsImpl = (DCBindingContainer) bindings;
DCIteratorBinding dciter = bindingsImpl.findIteratorBinding(jcb.getName()+"Iterator");
ViewObject vo =dciter.getViewObject();
ViewCriteriaManager vcm=vo.getViewCriteriaManager();
ViewCriteria vc=vcm.getViewCriteria("listById");
vo.applyViewCriteria(vc);
vo.setNamedWhereClauseParam("DepartmentId",pallet);
vo.executeQuery();
AdfFacesContext.getCurrentInstance().addPartialTarget(getT2());

Error while selecting date from external table

Hello all,
I am getting the follwing error while selecting data from external table. Any idea why?
SQL> CREATE TABLE SE2_EXT (SE_REF_NO VARCHAR2(255),
2        SE_CUST_ID NUMBER(38),
3        SE_TRAN_AMT_LCY FLOAT(126),
4        SE_REVERSAL_MARKER VARCHAR2(255))
5 ORGANIZATION EXTERNAL (
6    TYPE ORACLE_LOADER
7    DEFAULT DIRECTORY ext_tables
8    ACCESS PARAMETERS (
9      RECORDS DELIMITED BY NEWLINE
10      FIELDS TERMINATED BY ','
11      MISSING FIELD VALUES ARE NULL
12      (
13        country_code      CHAR(5),
14        country_name      CHAR(50),
15        country_language CHAR(50)
16      )
17    )
18    LOCATION ('SE2.csv')
19 )
20 PARALLEL 5
21 REJECT LIMIT UNLIMITED;
Table created.
SQL> select * from se2_ext;
SQL> select count(*) from se2_ext;
select count(*) from se2_ext
ERROR at line 1:
ORA-29913: error in executing ODCIEXTTABLEOPEN callout
ORA-29400: data cartridge error
KUP-04043: table column not found in external source: SE_REF_NO
ORA-06512: at "SYS.ORACLE_LOADER", line 19

It would appear that you external table definition and the external data file data do not match up. Post a few input records so someone can duplicate the problem and determine the fix.
HTH -- Mark D Powell --

Logical System(ORGLOGSY) populating from which table in R/3 system

Hi Friends,
I would like to understand about the Logical System(ORGLOGSY) from which table or from where this logical system being populating.
Because we could see this fields Logical System(ORGLOGSY) exist in PO item, HDR, SGR data sources.
Can anybody give some idea, how we'll get this source system logical system name into BW system.
SIRI

Hi Siri,
Check here
V_TBDLS
TX: RSA13----->Tools -
>assigment of source system to source system id
hope this will help you.
Thanks,
Vijay.

Can we export DATA from all tables in a schema?

Hi,
I have a question; Can we export all the DATA from all the tables present in the schema to any source (eigther CSV, TXT, DAt, etc..)?
Or
Can I have a PL/SQL procedure to display DATA from all Tables in a schema?
With Best Regards,
- Naveed

Hi,
This is pretty much what you need.
DECLARE
V_COUNT NUMBER;
v_sql varchar2(1000);
IN_OWNER_NAME VARCHAR2(100) := 'AP' ; -- SCHEMA NAME
TYPE T_COL_NAME is table of varchar2(1000) index by binary_integer;
v_col_tbl t_col_name;
BEGIN
FOR i in
(SELECT object_name
FROM dba_objects
     WHERE owner = IN_OWNER_NAME
     AND object_type ='TABLE'
and rownum < 2)
LOOP
v_sql := 'SELECT COUNT(*) FROM ' || i.object_name ;
EXECUTE IMMEDIATE v_sql INTO V_COUNT;
if v_count > 0 then
v_sql := 'SELECT * FROM ' || i.object_name ;
select column_name
bulk collect
into v_col_tbl
from DBA_TAB_COLUMNS
WHERE TABLE_NAME = I.OBJECT_NAME
AND OWNER = IN_OWNER_NAME;
-- start selecting the column and exporting using the column names selected.
end if;
if v_col_tbl.count > 0 then
for i in v_col_tbl.first .. v_col_tbl.last
loop
DBMS_OUTPUT.PUT_lINE(v_col_tbl(i));
end loop;
end if;
DBMS_OUTPUT.PUT_lINE( i.object_name || '-' || v_count);
END LOOP;
END;
- Ronel

Can not insert or update [TABLE] from internal table in method

I've faced a problem with OO abap. I've tried to insert into [ TABLE ] from internal table, but i've got error msg after i compiled.
"An explicit work area is necessary in the OO context. Use "INSERT wa INTO [TABLE] itab""
After i changed to loop in work area and INSERT INTO [TABLE] VALUES gw_data., everything is fine, can compile and run.
This is error code.
METHOD set_data_to_table.
    REFRESH gi_data.
    CLEAR gi_data.
    IF gi_file[] IS NOT INITIAL.
* Set data for modify table
      LOOP AT gi_file INTO gw_file.
        MOVE-CORRESPONDING gw_file TO gw_data.
        me->conversion_input( EXPORTING im_vendor = gw_data-vendor
                              CHANGING ch_vendor = gw_data-vendor ).
        APPEND gw_data TO gi_data.
      ENDLOOP.
      INSERT [TABLE] FROM TABLE gi_data.
*      LOOP AT gi_data INTO gw_data.
*        INSERT INTO [TABLE] VALUES gw_data.
*        IF sy-subrc = 0.
*          COMMIT WORK.
*        ELSE.
*          ROLLBACK WORK.
*        ENDIF.
*      ENDLOOP.
    ELSE.
      MESSAGE 'No data found' TYPE 'I'.
    ENDIF.
ENDMETHOD.                    "set_data_to_table

Hi Matthew,
I think there is no difference in database insert between OO and non-OO.
The correct syntax according to ECC600 online documentation is
[Inserting Several Lines|http://help.sap.com/saphelp_erp2005vp/helpdata/en/fc/eb3a6d358411d1829f0000e829fbfe/content.htm]
To insert several lines into a database table, use the following:
INSERT target FROM TABLE itab \[ACCEPTING DUPLICATE KEYS].
This writes all lines of the internal table itabto the database table in one single operation. If one or more lines cannot be inserted because the database already contains a line with the same primary key, a runtime error occurs. You can prevent the runtime error occurring by using the addition ACCEPTING DUPLICATE KEYS.
Whenever you want to insert more than one line into a database table, it is more efficient to work with an internal table than to insert the lines one by one.
I think the syntax
INSERT my_dbtable FROM TABLE gi_data.
should work, your suggestion may lead to syntax error.
Regards,
Clemens

Data loading from one table to another

Hi,
I want to load some data from a temp table to a master table. The master is having 40million records and the temp table is having 23 million records. Master table is having around 50 columns and we are adding 4new columns and the temp table is having 5columns. The data for these 4new columns are available in the temporary table also the employee column is there in common to these two table.
I used a stored procedure to load the data, whcih uses a cursor. But its taking more that 6hours to load.
Can any one suggest me a good technique to load data faster?
Thanks,
Santhosh.

hi consider this case scenario which matches with yours.
first of all you have to update not insert in master table.
master table = emp with columns (emp_id, emp_name, emp_designation)
to this original master table you added two more columns emp_salary, emp_department
so now your master table looks like emp_id, emp_name, emp_designation, emp_salary, emp_department
but when you do select * from master table, the last two columns salary & department are blank.
Now you have another temp table with folllowing columns (emp_id, emp_salary, emp_department)
now emp_id is common to master & temp tables & you want to put values from temp table into master tables? I think this is what ur trying to do..
so for the above case the query i would write is
update master_table m set m.emp_salary=(select t.emp_salary from temp_table t where
t.emp_id=m.emp_id);
commit;
Regds.

Copying large amount of data from one table to another getting slower

I have a process that copies data from one table (big_tbl) into a very big archive table (vb_archive_tbl - 30 mil recs - partitioned table). If there are less than 1 million records in the big_tbl the copy to the vb_archive_table is fast (-10 min), but more importantly - it's consistant. However, if the number of records is greater than 1 million records in the big_tbl copying the data into the vb_archive_tbl is very slow (+30 min - 4 hours), and very inconsistant. Every few days the time it takes to copy the same amount of data grows signicantly.
Here's an example of the code I'm using, which uses BULK COLLECT and FORALL INSERST to copy the data.
I occasionally change 'LIMIT 5000' to see performance differences.
DECLARE
TYPE t_rec_type IS RECORD (fact_id NUMBER(12,0),
store_id VARCHAR2(10),
product_id VARCHAR2(20));
TYPE CFF_TYPE IS TABLE OF t_rec_type
INDEX BY BINARY_INTEGER;
T_CFF CFF_TYPE;
CURSOR c_cff IS SELECT *
FROM big_tbl;
BEGIN
OPEN c_cff;
LOOP
FETCH c_cff BULK COLLECT INTO T_CFF LIMIT 5000;
FORALL i IN T_CFF.first..T_CFF.last
INSERT INTO vb_archive_tbl
VALUES T_CFF(i);
COMMIT;
EXIT WHEN c_cff%NOTFOUND;
END LOOP;
CLOSE c_cff;
END;
Thanks you very much for any advice
Edited by: reid on Sep 11, 2008 5:23 PM

Assuming that there is nothing else in the code that forces you to use PL/SQL for processing, I'll second Tubby's comment that this would be better done in SQL. Depending on the logic and partitioning approach for the archive table, you may be better off doing a direct-path load into a staging table and then doing a partition exchange to load the staging table into the partitioned table. Ideally, you could just move big_tbl into the vb_archive_tbl with a single partition exchange operation.
That said, if there is a need for PL/SQL, have you traced the session to see what is causing the slowness? Is the query plan different? If the number of rows in the table is really a trigger, I would tend to suspect that the number of rows is causing the optimizer to choose a different plan (with your sample code, the plan is obvious, but perhaps you omitted some where clauses to simplify things down) which may be rather poor.
Justin

Moving time-dependant data from one table to another (archiving)

Hello all
I would like to know if there's an easier solution or a "best practice" to move data from one table to another. The context of this issue can be found within "archiving".
More concretely: we have an application that uses several tables to log information to.
These tables are growing like crazy, and we would like to keep only "relevant" data in those tables, so I was thinking about moving data from these tables that have been in there for, say 2 months, to "archiving" tables.
I figured there must be some kind of "best practice" to get this done.
I have already written a procedure that loops the table that has the time indicator and inserts the records from the normal tables into the archive tables (and afterwards delete this data), but it seems to be taking ages to get it done.
Thanks in advance!
Message was edited by:
timschraepen

There is nothing to do with PL/SQL.
You can refer below links:
http://www.lc.leidenuniv.nl/awcourse/oracle/server.920/a96524/c12parti.htm
http://www.stanford.edu/dept/itss/docs/oracle/10g/server.101/b10739/partiti.htm#i1006727

Insert old missing data from one table to another(databaase trigger)

Hello,
i want to do two things
1)I want to insert old missing data from one table to another through a database trigger but it can't be executed that way i don't know what should i do in case of replacing old data in table_1 into table_2
2)what should i use :NEW. OR :OLD. instead.
3) what should i do if i have records exising between the two dates
i want to surpress the existing records.
the following code is what i have but no effect occured.
CREATE OR REPLACE TRIGGER ATTENDANCEE_FOLLOWS
AFTER INSERT ON ACCESSLOG
REFERENCING NEW AS NEW OLD AS OLD
FOR EACH ROW
DECLARE
V_COUNT       NUMBER(2);
V_TIME_OUT    DATE;
V_DATE_IN     DATE;
V_DATE_OUT    DATE;
V_TIME_IN     DATE;
V_ATT_FLAG    VARCHAR2(3);
V_EMP_ID      NUMBER(11);
CURSOR EMP_FOLLOWS IS
SELECT   EMPLOYEEID , LOGDATE , LOGTIME , INOUT
FROM     ACCESSLOG
WHERE    LOGDATE
BETWEEN TO_DATE('18/12/2008','dd/mm/rrrr')
AND      TO_DATE('19/12/2008','dd/mm/rrrr');
BEGIN
FOR EMP IN EMP_FOLLOWS LOOP
SELECT COUNT(*)
INTO V_COUNT
FROM EMP_ATTENDANCEE
WHERE EMP_ID    = EMP.EMPLOYEEID
AND    DATE_IN   = EMP.LOGDATE
AND    ATT_FLAG = 'I';
IF V_COUNT = 0 THEN
INSERT INTO EMP_ATTENDANCEE (EMP_ID, DATE_IN ,DATE_OUT
                            ,TIME_IN ,TIME_OUT,ATT_FLAG)
     VALUES (TO_NUMBER(TO_CHAR(:NEW.employeeid,99999)),
             TO_DATE(:NEW.LOGDATE,'dd/mm/rrrr'),       -- DATE_IN
             NULL,
             TO_DATE(:NEW.LOGTIME,'HH24:MI:SS'),      -- TIME_IN
             NULL ,'I');
ELSIF   V_COUNT > 0 THEN
UPDATE EMP_ATTENDANCEE
    SET DATE_OUT       = TO_DATE(:NEW.LOGDATE,'dd/mm/rrrr'), -- DATE_OUT,
        TIME_OUT       =   TO_DATE(:NEW.LOGTIME,'HH24:MI:SS'), -- TIME_OUT
        ATT_FLAG       =   'O'
        WHERE EMP_ID   =   TO_NUMBER(TO_CHAR(:NEW.employeeid,99999))
        AND   DATE_IN <= (SELECT MAX (DATE_IN )
                           FROM EMP_ATTENDANCEE
                           WHERE EMP_ID = TO_NUMBER(TO_CHAR(:NEW.employeeid,99999))
                           AND   DATE_OUT IS NULL
                           AND   TIME_OUT IS NULL )
AND   DATE_OUT IS NULL
AND   TIME_OUT IS NULL ;
END IF;
END LOOP;
EXCEPTION
WHEN OTHERS THEN RAISE;
END ATTENDANCEE_FOLLOWS ;
                        Regards,
Abdetu..

INSERT INTO SALES_MASTER
   ( NO
   , Name
   , PINCODE )
   SELECT SALESMANNO
        , SALESMANNAME
        , PINCODE
     FROM SALESMAN_MASTER;Regards,
Christian Balz

Loading data from one table to another table

I need to load the data (data conversion) from one table to 3 different table.
I have to load the data from Source table to following 3 target tables.
So Consumer table has email pk and it has relationship with CONSUMER_RCV table and CONSUMER_RCV
table has relationship with CONSUMER_ATTR table. I am doing right now with pl/sql but I am looking
to use MULTI INSERT or SQL*LOADER or another efficient way.
I tried with MultiInsert but it getting failed as it's violating Unique Constraints as source table might contains
Duplicate emails.
Could you please show me how I can load the data efficiently?
Also I need to load in CONSUMER_ATTR table from CONTACT table which has ATTR1, ATTR2 columns.
so My mapping will be ...
Contact.email, first_name, last_name will go into Consumer table
then in CONSUMER_RCV, I generate the id column value by sequence, load email and DATE_CREATEd from contact table
And rest of the value is hard coded
Then in CONSUMER_ATTR table I will generate the CONSUMER_ATTR_id through sequence, for ID, will use the same
id column value which I have generated by sequence in CONSUMER_RCV, then put the attr_type = 'ATTR1' and for
attr_value column I will insert the value from contact table's ATTR1 value,
Then generate another CONSUMER_ATTR_ID, will use the same id column value which I have generated by sequence
in CONSUMER_RCV, then put the attr_type = 'ATTR2' and for
attr_value column I will insert the value from contact table's ATTR2 value,
Please let me know if you need further explanation.
I am using Oracle 9i R2.
Please consider CONTACT is Source table, CONSUMER is a Target1, CONSUMER_RCV is a Target2 and CONSUMER_ATTR is a Target3
to simplify the problem.
Following is the Table structure
=========================
CREATE TABLE CONTACT (
ID VARCHAR2 (40) NOT NULL, -- will go into Target1
EMAIL VARCHAR2 (100) ,      -- might be duplicate and will go into Target1 and Target2
FIRST_NAME VARCHAR2 (100) NOT NULL, -- will go into Target1
LAST_NAME VARCHAR2 (100) NOT NULL, -- will go into Target1
COUNTRY VARCHAR2 (40) NOT NULL, -- will go into Target1
PHONE VARCHAR2 (100), -- will go into Target1
NOTIFY VARCHAR2 (3), -- will go into Target2 table's RECEIVE_EMAIL column
CREATE_DATE DATE ,               -- will go into Target1 and target2
ATTR1 VARCHAR2 (400),           -- will go into Target3 as attr_type= ATTR1 and will load actual value in ATTR_VALUE
ATTR2 VARCHAR2(100),          -- will go into Target3 as attr_type= ATTR2 and will load actual value in ATTR_VALUE
ATTR2 VARCHAR2(100),          -- will go into Target3 as attr_type= ATTR1 and will load actual value in ATTR_VALUE
CONSTRAINT CONTACT_PK
PRIMARY KEY ( USER_ID ) ) ;
CREATE TABLE CONSUMER(
EMAIL VARCHAR2 (100) NOT NULL, -- PK
TITLE VARCHAR2 (40),
FIRST_NAME VARCHAR2 (40),
LAST_NAME VARCHAR2 (40),
ADDRESS1 VARCHAR2 (40),
ADDRESS2 VARCHAR2 (40),
CITY VARCHAR2 (30),
STATE          VARCHAR2 (30),
ZIP          VARCHAR2 (10),
COUNTRY VARCHAR2 (40),
PHONE VARCHAR2 (15),
DATE_CREATED DATE NOT NULL,
CONSTRAINT CONSUMER_PK
PRIMARY KEY ( EMAIL ) ) ;
CREATE TABLE CONSUMER_RCV (
ID                VARCHAR2 (40) NOT NULL,-- PK
EMAIL VARCHAR2 (100) NOT NULL,-- FK reference to Consumer
SITE VARCHAR2 (100) NOT NULL, -- default website
RECEIVE_EMAIL VARCHAR2 (1),
CREATE_DATE DATE NOT NULL,
CONSTRAINT CONSUMER_RCV_PK
PRIMARY KEY (ID) ) ;
ALTER TABLE CONSUMER_RCV ADD CONSTRAINT CONSUMER_RCV_FK
FOREIGN KEY (EMAIL)
REFERENCES CONSUMER (EMAIL) ;
CREATE TABLE CONSUMER_ATTR (
CONSUMER_ATTR_ID           VARCHAR2 (40) NOT NULL, -- PK
ID                     VARCHAR2 (40) NOT NULL, -- FK reference to COnsumer_RCV
ATTR_TYPE           VARCHAR2 (100) NOT NULL,
ATTR_VALUE           VARCHAR2 (4000) NOT NULL,
CONSTRAINT CONSUMER_ATTR_PK
PRIMARY KEY ( CONSUMER_ATTR_ID ) ) ;
ALTER TABLE CONSUMER_ATTR ADD CONSTRAINT CONSUMER_ATTR_FK
FOREIGN KEY (CONSUMER_ATTR_ID)
REFERENCES CONSUMER_RCV (ID) ;

HI Hema,
How are the entries related.. is it like for one entry in y table there are more than one entry in x table then you have to use loop with in loop , here are the both the conditions.
1) For each entry in Y there are more than one entries in X
sort y by quota trpid.
sort x by quota trpid.
loop at y.
loop at x where quota eq y-quota
                        and trpid eq y-trpid.
z-value = x-value.
append z.
endloop.
endloop.
2) For each y there is one entry in x table.
sort y by quota trpid.
sort x by quota trpid.
loop at y.
read table x with key quota = y-quota
                            trpid = y-trpid binary search.
if sy-subrc eq 0.
z-value = x-value.
append z.
Endif.
endloop.
Mahesh

Inserting data from one table into another table using PL/SQL

HI,
I am trying to insert values from one table into another using PL procedure, the values I want to retrieve from the table riverside1 are charac_id and charac_type and insert these values into another table called riverside2 , the stored procedure zorgs_gorfs(x,y) accepts two parameters which are 2 charac_id's of d characters in riverside1 then using insert statements inserts these characters from riverside1 into riverside2.
CREATE OR REPLACE PROCEDURE zorgs_gorfs(x IN NUMBER, y IN NUMBER) AS
     BEGIN
          INSERT INTO riverside2
               (charac_id)
          VALUES
               (x);
INSERT INTO riverside2
               (charac_id)
          VALUES
               (y);
      END zorgs_gorfs;
/This works but the problem im having is that when I also try to insert the charac_type as well as the charac_id it doesnt work below is the code:
CREATE OR REPLACE PROCEDURE zorgs_gorfs(x IN NUMBER, y IN NUMBER) AS
     BEGIN
          INSERT INTO riverside2
               (charac_id,charac_tye)
          VALUES
               (Select
                    charac_id,
                    charc_type
               FROM
                    riverside1
               WHERE
                    charac_id = x);
      END zorgs_gorfs;
/can someone kindly sort me out

modify this sql
INSERT INTO riverside2
               (charac_id,charac_tye)
          VALUES
               (Select
                    charac_id,
                    charc_type
               FROM
                    riverside1
               WHERE
                    charac_id = x);as
INSERT INTO riverside2
               (charac_id,charac_tye)
          VALUES
               (Select
                    charac_id,
                    charc_type
               FROM
                    riverside1
               WHERE
                    charac_id in ( x,y));But my suggestion would be consider revising your approach. It does not look that good.
Thanks,
karthick.

IFS Document_ID from iFS Tables

Similar Messages

Maybe you are looking for