Ifs902 doe not find tiff files in search
Hi gurus,
i'm have this issue too you:
I'm creating an application that search for
files in 9ifs. Some of this files are TIFF type.
search class is not able to find any kind of files
of that type.
There was a problem with the Annotator agent that
throw a exception when annotating TIFF files, but
I've changed the Annotator.jar, using now Annotator.jar
from cmsdk903.
The Exceptions were not throw anymore but search classes
can not find the document yet.
Does anyone knows anything that can help?
Thanks in advance!
Felippe.
Hello Gokce,
After cmd-f in the Finder you have to click *on the button labeled "Kind"*, don't confuse that with the button right next to Kind is... . Now a pop up menu will open from which you have to choose "Other...". Another menu appears from which you can choose "System Files".
floba
Similar Messages
-
Help:Can not find the file in jar!
Hello everyone:
I build a project using Netbeans 5.0 and make a jar file with it...
The code in the project as follows will throw an exception described that it can not find the file named datasource-config.xml
String dataFilePath = getClass().getResource(dataFile).getPath();
//System.out.println("filepath:"+dataFilePath);
InputStream input = new FileInputStream(dataFilePath);
when I run the project with the main() function as an entry it works perfectly and output:
filepath:/C:/projects/java_project/search/build/classes/com/cn/wxjt/lucene/config/datasource-config.xml
But when I compressed the project with jar and run it , it will show:
filepath:file:/C:/projects/java_project/search/dist/search.jar!/com/cn/wxjt/lucene/config/datasource-config.xml
there is a (!) between search.jar and /com/cn/wxjt...
I dont know why I generate a ! symbol in the file path... Is it cause the exception->
java.io.FileNotFoundException: file:\C:\projects\java_project\search\dist\search.jar!\com\cn\wxjt\lucene\config\datasource-config.xml
If you have any idea, plz tell me.
Thank you and best wishes to you !
:)If the file you want to read is in your jar file, use
getClass ().getResourceAsStream
(relative_path_file_name)Hope that help,
Jackhey jack i want to open the file as new File
i m using this.getClass().getResource("resource/backend.xml");
the resource is the directory inside the jar file.
when i prints the url it shows:
the jar file is in the WORK directory
URL : jar:file:/home/neeraj/WORK/show.jar!/resource/backend.xml
now when i creates new File using the url.getFile() method the file does not exist.
although the same programs runs well when i uses the InputStream
so plz tell me cant I create a new File from the above method????
thanks in advance
with regards
neeraj -
Summary:
I have installed Windows 7 Ultimate x64 on my G580. Everything is working fine except the WLAN driver fails to install with the error "BCM4313: Can not find setup file".
Details:
I bought lenovo G580 with Windows 8. Since my parents are not comfortable with the learning curve of Win 8, I successfully downgraded to Windows 7 Ultimate x64. Everything is working fine but my WLAN card is not recognized because of lack of driver.
The lenovo parts look-up page says I have broadcom WLAN card - CBT BCM4313 MOW HMC WLAN
I looked at lenovo driver downloads site and tried following driver files for Windows 7 and both of them failed to install with the following error. I tried installing other WLAN drivers also but they won't even install as required hardward is not there.
Error - "BCM4313: Can not find setup file"
Drivers Tried:
- http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS028105
- http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS028208
Any help about how to get past this error will be appreciated. The previous Widnows verison (Windows 8) is still on my hard-drive as windows.old folder. Let me know if I can copy a specific file from there.
Thank you.
BJS
Solved!
Go to Solution.Download this driver bcm4313
Start setup and extract the files.After that go to star menu/control panel/system/device manager.There you probably find out that network adapter driver is missing.Choose it and click with right mb for drop menu to show up.Select properties then Driver/Update Drivers...Select to load driver from computer hard drive and choose the path where extract files is.Default path is main partion C: and search for directory named Driver.
And yes...you get "Can not find setup file" error but dont worry.Files needed to instal driver are extract fine. -
hi master
error Could not find Policy File: C:\Documents and Settings\Administrator\.java.policy
Sir when I open policytool the system give me this error
And I use http://www.jensign.com/JavaScience/www/keystorereader/index.html this link
For Keystore, Policy and Security File Reader
that give me this message
------ Default Policy File and Keystore Status ------
java.home C:\PROGRA~1\Java\JRE15~1.0_1
C:\PROGRA~1\Java\JRE15~1.0_1\lib\security found.
user.home C:\Documents and Settings\Administrator
C:\Documents and Settings\Administrator\.java.policy NOT found.
C:\Documents and Settings\Administrator\.keystore NOT found.
How set user home and keystor please give me idea
thank
aamirI know this is a relatively old post, but some people can stumble on this page when doing a search for this problem.
Anyway, I ran into this on my PC after I installed Sybase which had an older jre.
Solution:
1. Run regedit
2. Look for Java Runtime Environment
You may have to do multiple searches. Eventually you'll find one with the version number.
3. Modify the value and change it to the correct version number. (in your case, you would have changed it from 1.4 to 1.6).
This is much quicker than reinstalling Java every time installing something that uses an older version of Java hoses up the registry value. -
When I rename a photo why can I not find it doing a search? The photo obviously keeps its old name even though it has a new one> IPhoto 09
Thanks, that makes sense. If I do a search in IPhoto I find it. I have 6 grand children and also have had my camera for quite awhile and it starts file names over again after 10,000 pictures. (I don't have all these on the computer) but now I have some files with the same name ie img_4 and img_4
Thanks again for your help!!
HC -
I've just installed Windows 8 on a Lenovo ThinkPad T440s using Lenovo's recovery discs. I did not join it to a domain. I logged in as Administrator, navigated to our deployment share, and ran Scripts\LiteTouch.wsf. I selected the new Sysprep and Capture
Task Sequence that I just made, told it to upload to DeploymentShare$\Captures, then started the Task Sequence.
It seemed to run fine until after the first reboot. Windows 8 configured the PC for a while, then displayed an error that it had been shut down unexpectedly. I wasn't sure if this was normal, so I just clicked OK. Then I got an error that said "Can
not find script file C:\LTIBootstrap.vbs". After clicking OK on that, I am brought to the desktop.
The image cannot be found in DeploymentShare$\Captures. Under the Monitoring section of the DeploymentWorkbench, I can see that MDT thinks the Task Sequence is still running on the machine (though it is not), with progress stuck on step 16 of 23: Execute
Sysprep. There are 0 errors and 0 warnings listed.
BDD.log is too long to post all of it, but here's the last few lines in case that's helpful.
<![LOG[BCD> The operation completed successfully.]LOG]!><time="11:20:35.000+000" date="12-26-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[BCDEdit returned ErrorLevel = 0]LOG]!><time="11:20:35.000+000" date="12-26-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Run Command: C:\windows\SYSTEM32\bcdedit.exe /default {d22e7e91-9ee7-46eb-89d7-c5859e4302f0}]LOG]!><time="11:20:35.000+000" date="12-26-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[BCD> The operation completed successfully.]LOG]!><time="11:20:35.000+000" date="12-26-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[BCDEdit returned ErrorLevel = 0]LOG]!><time="11:20:36.000+000" date="12-26-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Property BootPE is now = True]LOG]!><time="11:20:36.000+000" date="12-26-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[LTI Windows PE applied successfully]LOG]!><time="11:20:36.000+000" date="12-26-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Event 41019 sent: LTI Windows PE applied successfully]LOG]!><time="11:20:36.000+000" date="12-26-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[LTIApply processing completed successfully.]LOG]!><time="11:20:36.000+000" date="12-26-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Event 41001 sent: LTIApply processing completed successfully.]LOG]!><time="11:20:36.000+000" date="12-26-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
I would greatly appreciate any assistance determining what went wrong and how to correct it. Thank you.You might get teh c:\LTIBootStrap.vbs error if you are running SysPrep with a unattend.xml template that contains the c:\bootstrap.vbs template, yet you are *NOT* deploying the image with MDT Litetouch, instead just applying the image to the final machine.
Crack open your install.wim file and search for the unattend.xml file in the normal places to see what it is.
I am concerned about the "shut down unexpectedly" error. There should be no shutdown state information left from a captured *.wim file.
If you still need assistance, please feel free to copy the bdd.log file to a public site like OneDrive, and share the link.
Keith Garner - Principal Consultant [owner] -
http://DeploymentLive.com -
Dynadock V10 - " error can not find installation file" INSTALL ERROR
Hi I have a toshiba dynadock V10.
Every time i try to install the drivers it says " error can not find installation file". I have downloaded the latest drivers and switched off my anti virus and shut off all running proiceses and no go. There are a few references to this on the internet but none has a solution.
I amn trying to install it on an equium U400 running windows 7.
Funnily enough it loaded on an old dell pc easily!
I have spent hours searching the net and there is no answer. I dont have anything showing in programs to uninstall.
Thanks>Funnily enough it loaded on an old pc easily!
Hi
This means that drivers are ok and there must be something wrong with the system preinstalled on Equium U400.
How did you proceed?
Its important that you would NOT connect the Dynadock to the notebook before the drivers and software installation has not been finished.
Therefore you have to install the software firstly. Then after new reboot connect the Dynadock to the notebook and the installation would finish the next steps. -
I believe I had some kind of virus attack. I got everything cleaned up. (I HOPE) In the process of cleaning the virus, I unintalled Firefox because it wouldn't open. Kept getting the error message that Firefox was already open and I had to close out of the sessions or restart the computer. After restarting the computer several times and not being able to find any open sessions in task manager, I uninstalled. When trying to reinstall, I get the error message "can not find archive file." I've tried downloading Firefox from cnet as well as the Mozilla site to no avail. Please help. I'm getting tired of using Chrome already!
Hello,
Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
'''Note:''' You might want to print these steps or view them in another browser.
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
#Delete the Firefox installation folder, which is located in one of these locations, by default:
#*'''Windows:'''
#**C:\Program Files\Mozilla Firefox
#**C:\Program Files (x86)\Mozilla Firefox
#*'''Mac:''' Delete Firefox from the Applications folder.
#*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
#Now, go ahead and reinstall Firefox:
##Double-click the downloaded installation file and go through the steps of the installation wizard.
##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
Please report back to see if this helped you!
Thank you. -
Trying to install iTunes 8.0, can not find script file error
I recently tried to upgrade Win XP for iTunes 8.0, and got the following error msg:
can not find script file “C:\program files\uninstall scripts\quicksilver player 7.4\install.wsf”
HELP!
TonyHey Tony, you don't happen to work for a large aerospace company, do you? My guess is that you do, because I work at the same place, and the problem is with our company's distribution of quicktime. email me off list and I'll tell you how to fix it.
bralston at mac dot com -
Could not find the file "flash.ocx"
I have Windows XP and the latest version of Flash but keep
getting a error message popping up saying - Could not find the file
"flash.ocx"
Does anyone know how i can sort out this problem!
Thanks!Salutations rajmak2000, tu nous disais :
> I have Windows XP and the latest version of Flash but
keep getting a
> error message popping up saying - Could not find the
file "flash.ocx"
Hi !
If you've got the latest version of flash, the message should
says
something like "could not find the file flash8b.ocx" instead
of
"flash.ocx" (who is, it seems, flash 7.0).
I suspect, once again, that registry rights are broken.
Try this script :
http://docxp.mvps.org/b1n/FlashRepair.exe
Bye
~Jean-Marc~
http://docxp.mvps.org
http://msmvps.com/blogs/docxp/ -
Post 10.3: Could not find the file "hw.kb" to install.
I'm getting this error on my 10.3 clients.
"Could not find the file "hw.kb" to install"
I think this is the April PRU...I have applied the post 10.3 fix and this is still not working :/
Full Message:
GenericActions.FileCouldNotBeFound{hw.kb}
Message ID: GenericActions.FileCouldNotBeFound
Related Objects: /System/System Bundles/102d38812c9437a05ee01e8bc93369f0This was not related to the 10.3 update, atleast not directly.
I deleted the April PRU in system updates, checked for updates, and reapplied.
This solved my issue. -
Error: Could not find the file "flash.ocx"
I have been receiving the error COULD NOT FIND THE FILE
"FLASH.OCX" for the past couple of months - I have been watching
the message boards and have seen a lot of "fixes" and beta's come
up errors (not sure that it's this exact error though).
I get this error continuously throughout the day - no matter
if I have nothing running on my computer or I have 10 things open.
This morning it occurred to me that my screen saver is not coming
on and it seems to me that the above errror is popping up everytime
my screen saver should start. I HAVE TIMED THIS TODAY AND CHANGED
HOW LONG BEFORE MY SCREEN SAVER STARTS - AND IT IS DEFINITELY
GETTING THE ERROR EVERYTIME THE SCREEN SAVER IS TRYING TO START.
Last week, I deleted the version of Flash that I had and then
re-installed; still getting the error.
I was getting the error when I had IE6 so I thought maybe
switching to IE7 would correct it - but it didn't (that was a few
weeks ago).
My computer does not freeze up but it is SOOO annoying to
continually throughout the day get this error.
IE7.0
ADOBE 9,0,28,0
WINDOWS XP - SP2
PLEASE HELP!Ah-ah! The workaround is to map my network folder to a drive, say... M:\
So, when I select Edit->Edit in Audition->Sequence, I can select the Browse button to alter the Path destination. Instead of seeing '\\Zeus\Projects\...', I select the mapped M: drive so the path reads 'M:\Projects\...' instead.
Then, Audition loads and is able to find the sequence or clip.
So... that solves my problem! -
Recently I'm getting an error dialog box on my T530 when I boot it into my OEM installation of Windows 8. The window title bar is "Windows Script Host", and the error message is:
Error on boot: "Can not find script file "C:\ProgramData\Lenovo-20841.vbs".
I pulled up an old backup, and I do have that file, along with a number of other ones that are missing from that directory. I'm attaching a screenshot of the files that are missing. Not sure why they would have been deleted (I know I didn't do it manually). Should I just restore the file? What about the other ones?
Thanks very much.I am getting a different VBS script error than the one listed above.
Does anyone know how I can get this file? or recreate it?
I get a similar message saying that it can't find the file c:\programdata\Lenovo-11472.vbs
Also, my wireless just randomly resets - sometimes very few minutes - after I've been using the system for a while. It's brand new and I can't figure out what's going on. Could this be the issue?
When I restart, it stays stable for a while and then starts acting up again.
Thanks for your help! -
Please help.
iSafari does not start up due to an error caused by plug in librooksbas.dylib.
How can I remove this plugin without opening safari. Finder does not find the file, nor any other plugin.
EricFor future reference, Safari Plugins are kept in Macintosh HD> Library> Internet Plugins.
To unhide the Library folder, open up Terminal (just type"Terminal" into spotlight) and type:
chflags nohidden ~/Library -
I have transferred a load of files from my PC to my iMac using the migration assistant. The message on both machines say that the process was successful but I can not find the files on the mac. Any ideas?
When you use Migration Assitant it creates another user account and puts your files there. Please log out of your normal account and log into the new account. Had you use Setup Assistant when it asked if you were migrating that would not have occured. You have a couple of options, combine the two accounts (not recommended) or start over, use Setup Assistant and have everything in one user account. Here is a link to Pondin's guide for Lion Setup Assistant tips however if you want to combine the two accounts he has addressed that in
http://pondini.org/OSX/Transfer.html
Maybe you are looking for
-
Need advice on graffics card upgrade for use of CS6 Mercury Playback in PR & AE w/ dell xps 9100
I am curretly running CS6 on my dell xps 9100 Windows 7 64bit 12GB Ram 2TB HD + 0 Rate 2TB External Drive (x2) Intel Core i7 930 operating at 2.8 gigahertz with an 8-megabyte cache. Memory and Storage The Studio XPS 9100 can be equipped with up t
-
Dear all! Please help me with this! I have just create an apple id and when I want to sign in iTunes store, the message ( this apple Id has not yet been used in the iTunes store please) appears and when I tap the review, again billing information is
-
I am using a Nokia N8 with Windows 7 Ultimate x64. A couple of days ago, I got a notification by Ovi Suite that there was an update available. I proceeded to let the Ovi app download and install this update. The installation failed with a message t
-
My yahoo search defaults to netherlands not england can it be changed?
hi, everytime i set my search engine to yahoo then search i get results from the netherlands, how do i change to england? thanks
-
Can I play a DVD through the Apple TV to the monitor?
I am trying to play a DVD on monitors through the apple TV. I get audio but no video. What settings do I need?