Igdpmd64.sys BSOD on HP ProBook 4530s Windows 7 64-bit

I used my HP ProBook 4530s with Windows 7 64-bit and Internet Explorer 8 (IE8) installed since 2011 with no issues.
Recently I updated Windows to SP1 and IE10. All works well except one thing.
When I run IE10, open few tabs and hoover my mouse over IE10 icon so that it shows the half-transparent small windows my PC crashes.
It shows blue screen with PAGE_FAULT_IN_NONPAGED_AREA message caused by igdpmd64.sys driver.
1) I found at HP forum the post "igdpmd64.sys BSOD on HP Envy14t".
I followed the recommendation to uninstall KB2670838.
However after rebooting PC the IE10 disappeared and IE8 came back to life.
I updated then Windows trying to block the KB2670838 installation but it was impossible since KB2670838 was not shown at the list but somehow "installed in the background".
So I was back to the point "all works well except one thing".
2) I found another forum post which recommended to upgrade the igdpmd64.sys driver.
I went to: http://h20564.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=5060881&swLangOid=8&swEnvOid=4058
Chose: Drivers - Graphics (3)
Downloaded the newest Intel Graphics Kernel Mode Driver 8.15.10.2559 from 2012-02-22
However during the installation process I received a message (2a):
"This computer does not meet the minimum requirements for installing the software".
I called HP support who advised to install the previous version of the driver.
I did it but received the same message (2a)
I called HP support again who advised to install the driver from the Intel page.
3) I went to: https://downloadcenter.intel.com/search?keyword=Intel%c2%ae+Q45+Express+Chipset
Downloaded: Intel® Graphics Media Accelerator Driver, Windows 7* 64, Windows Vista* 64 (exe)
                           graphics driver version 15.17.19.64.2869 (8.15.10.2869) for Intel® integrated graphics.
However during the installation process I received a message (2a).
I have no more ideas. Could anybody help me please ?
Best Regards,
Sylwek
This question was solved.
View Solution.

I know it's weird that I reply to myself.
HP support advised me to install the ATI Video Driver and Control Panel
at:
http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=5060881&swItemId=ob_101995_1&swEnvOid=405...
It helped :-)
Thank you HP support Poland

Similar Messages

  • Network Controller Driver not found, hp proBook 4530s, Windows 7

    I am using a notebook (proBook 4530s), with Windows 7, 64-bit,  and in the device manager I get a yellow exclamation mark in Network controller even after downloading and installing the respective driver Atheros / Realtek Wireless LAN Driver(s). The driver packacge extracts itself and there is no confirmation of finishing the setup. The problem started after a BIOS update by the hp support assistant on my pc

    You're very welcome. Below is the link to the driver you need for the Ralink wireless card in your notebook. http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5060882&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_111782_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  • Screen does not turn on after sleep - ProBook 4530s - Windows 8.1 (64bit)

    Hi everyone,
    Not sure if this had to be posted in notebook display and video section, or laptop lockups, freezes and hangs. Anyway, I have a problem, where everything is fine with the computer, it's running smoothly, but whenever I make it go to sleep, after it does it instantly, the signals are of a regular laptop sleep - power buton flashing, no other signs of computer being on.
    However, the problem appears when turning the computer back on after sleep. After pressing the power button, the computer straight away starts working - you can hear the fan turned on, etc, just that pretty much nothing changes with the screen. Sometimes, with some particular light directed towards the screen, you can even see, that the computer is on (seeing the clock on the display), just like the brightness was set down to 2% or something. And there is nothing that helps from what I have tried to do (tried reinstalling both AMD drivers and Intel HD drivers). I researched this problem extensively but could not find a solution, however, as I have noticed that this is quite an old problem (assuming from the date of the posts this problem first showed up), there might be a solution for it, to which I just have not noticed the answer?
    If anyone can help me, please do, the sleep function is essential and extra important function when living on campus at university, I just cannot operate like this.
    Hopefully someone will know, thank you in advance.
    Dinas

    Hi @dindanas,
    Your ProBook 4530s is a commercial product and to get your issue more exposure I would suggest posting in the commercial forums. Here is a link to the Commercial Notebook forum.
    Please click “Accept as Solution ” if you feel my post solved your issue.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Thank you,
    BHK6
    I work on behalf of HP

  • HP ProBook 4530s Windows XP Graphics Driver issue

    Hey
    I just got a few of these 4530s and installed XP on them however the graphics driver won't take. I keep getting the error "This computer does not meet the minimum requirements."
    It has Service Pack 3 and is Windows XP Pro which is the only requirements I could find for the driver. Does anyone have any ideas why it won't install the graphics driver?
    This is the driver I found on HP for the graphics. Graphics Driver
    I have even googled and can't find any other ideas or situations where this occurs.
    Any ideas would be very much appreciated. Thanks!
    This question was solved.
    View Solution.

    Please give us the hardware ID from device manager for the video chip. Any chance the units you have use the discrete AMD graphics instead of the integrated Intel HD 3000? That would explain why the Intel driver doesn't work.
    You can also go to intel.com and download their generic video driver for the HD graphics for 32 bit XP:
    http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=20611&ProdId=3231&lang=eng
    This covers both the i series core version of the intel video and the Celeron version; again not sure what you have.

  • HP ProBook 4530s, Windows 7 64 bit Blue Screen – Windows will not load

    How do I get Windows to open. I have been having trouble this past week, Windows starts to load (Starting Window), then the blue screen is dsplayed.  Earlier this week I was able to use a restore point in January, and Window opened, but that restore point is not displayed now, only February restore points.  Below are the various error messages I received this week.
    02/10/2013  -  Windows Startup Repair
    Root cause found:
    Startup Repair has tried several times but still cannot determine the cuse of the problem.
    02/10/2013  -  System Restore
    System Restore did not complete successfully. Yur computer’s system files and settings were not changed.
    Details:
    An unspecified error occurred during System Restore. (0x8000ffff)
    02/06/2013 – Diagnosis & Repair
    Root cause found:
    Unknown Bugcheck: Bugcheck 3d. Parameters = 0xfffff8000470a000,0x0,0x0,0xfffff88005e77316
    Repair action: System Restore
    Result: Failed.  Error Code = 0x490
    Time taken = 0ms
    Repair Action: System files integrity check and repair
    Result: Failed.  Error Code = 0x490
    Time taken = 1192097ms
    Test Logs
    TYPE               RESULT           FAILURE ID                                          DESCRIPTION
    USB Port          Failed               QBW1VV-5P46H5-XD6V5F-8D4T03        USB Port
    Video               Failed               QBW1VV-5P46H5-XD6V5F-Q2AF03       Video Palette
    Repair Action: System Restore, Result: Failed.ERROR code = 0x49

    So pressing the power button and then immediately tapping the F8 key about every half second does not start Safe Mode?
    Safe mode will allow you to access Windows system restore, which will allow you to recover to a restore point dated before you had this problem without deleting any of your data. System restore is also reversible.
    That is a bit surprising. The test you posted the results of show that the memory and the hard disk are fine, so it is an operating system issue. If you try again to access safe mode without success then you only have a few options. 
    1) remove the disk from the notebook and put it in an enclosure to copy the data and files you have it to another PC
    2) perform a factory image recovery to recover your notebook to a useable condition (unfortunately deleting all of your personal files and data)
    Best regards,
    erico
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • HP Probook 4530s IDT High Definition Audio Codec Speakers

    As the title states:
    HP Probook 4530s
    Windows 7 OS
    IDT High Definition Audio Codec 
    The laptop quit playing through it's speakers, but will play through the headphone jacks when plugged in.  Tolerated it for about 8 months now.  Recently, while playing with it I noticed that if the System is set to headphones and you double click on the slider it begins to play through the laptop speakers for approximately 1 second.  You have to keep double clicking to maintain sound through the speakers.
    Now, when I go to Speakers/HP Properties it shows that the sound is to the bottom 3.5mm jack & front 3.5mm jack.  This laptop has NO bottom 3.5mm jack on it, only the front 3.5mm jack.
    I have tried uninstalling and reinstalling, looked for new drivers and thought about installing an old driver but not sure how far back to go.  Any suggestions would be a great help here.  If you need more info please let me know what you need and where to find it and I'll provide it.  Now that I know the speakers actually do work, I'd love to be able to use them again.

    Now to help out with troubleshooting this here is a pic and what I think is going on:
    Notice that the jacks are allegedly on the bottom and front for the speakers, only issue is there is no jack on the bottom and the front jack is for the headphones.  the 10-18-2012 update that HP is tossing around ignores the fact that there is no bottom jack for the HP 4530s, g7, pavilion and dv7.  I've had all of these over the years.  It seems someone wrote a driver that is one size fits all and totally missed that these speakers are located someplace else.
    So the question is, how do we reassign the location so it puts sound to the speakers?

  • Installing Logitech LS21 speakers for a HP ProBook 4530s

    Not getting sound from my   Logitech LS21 speakers which are brand new and in working order.  Still getting sound from probrook speakers.
    HP ProBook 4530s
    Windows 7 Professional 64-bit Service Pack 1
    IDT High Definition Audio CODEC
    Intel(R) Display Audio

    Hi,
    Please try: Right click the speaker icon > Select Playback devices > Right click and enable external speaker.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Hp probook 4530s drivers for windows 7 ultimate 32bit

    I am running Windows 7 Professional 64bit on my hp probook 4530s notebook, and I am going to upgrade to Windows 7 Ultimate 32bit. but I will need the drivers for the new windows, because i will have to format the laptop to change from 64 bit to 32 bit.
    So where can i download all the drivers.
    kind regards
    Jean Meintjes

    Hi, Jean:
    Below is the link to the support and driver page for your notebook:
    http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=5060882&lang=en&cc=us...
    Just use the W7 Pro 32 bit drivers for your W7 Ultimate installation.
    They will work just fine.
    Best regards,
    Paul

  • In my hp probook 4530s comes with windows 7 home premium,in​ternal bluetooth is disabled by the windo

     I am using hp probook 4530s comes with windows 7 home premium.In my laptop internal bluetooth is disabled by the windows from device manager, how can I enable it ?Please help......The error is:Windows has stopped this device because it has reported problems. (Code 43)

    It sounds like your laptop is  possibly overheating ,which will cause a shutdown. Have you checked your cooling fan to be sure it is working? Cleaned the vents/ports with compressed air to increase airflow?
    How to prevent and deal with overheating
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • Probook 4530s Display Enclosure / Hinge Set / Optical Drive Replacement (Windows 7 Home Premium)

    Hello, thank you in advance for taking the time.
    I have 2 Probook 4530s, one is fully functional, with cosmetic damage (and an nonworking optical drive).
    The other is missing HD and ram, with a dysfunctional MB, but pristine as far as aesthetics.
    My goal is to replace my hingeset, display enclosure and optical drive on my working 4530s with the parts from the non-working one.
    I do have a pdf titled "c02844462" which I believe is the full manual for the 4530s.
    This brings up a few questions.
    1. Would it be easier to transfer the HD, ram, and MB from working laptop to the other, or rather transfer the hinge set, display enclosure and optical drive from nonworking to other.
    2. What tools would i need aside from a small phillips/flat?
    3. As I am fairly inexperienced with computer/laptop hardware, (I've only installed ram and replaced a keyboard) am I getting myself in too deep with either or both of these options? (my warranty is no longer applicable).
    Again, thanks for taking time to read and ponder this
    broken hinge
    nonworking (left), working(right)

    *although inexperienced, I am meticulous and pretty tech savvy*

  • Internal microphone problem HP ProBook 6460b / Windows 7 Pro SP1 64bit

    I have a problem with internal microphone on my HP ProBook 6460b with Windows 7 Pro SP1 64bit.
    Sound works OK but the internal mic doesn't record any sound. Drivers are up to date - IDT High Definition Audio CODEC v. 6.10.6328.0 installed from HP drivers support page.
    HP ProBook 6460b
    p/n: XU550AV
    Any ideas?

    Hi,
    My laptop have the same problem too.
    Time of this report: 5/9/2012, 08:58:44
    Machine name: xxxxxx
    Operating System: Windows 7 Professional 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.120305-1505)
    Language: English (Regional Setting: English)
    System Manufacturer: Hewlett-Packard
    System Model: HP ProBook 4530s
    BIOS: Default System BIOS
    Processor: Intel(R) Core(TM) i5-2450M CPU @ 2.50GHz (4 CPUs), ~2.5GHz
    Memory: 8192MB RAM
    Available OS Memory: 8126MB RAM
    Page File: 3300MB used, 12950MB available
    Windows Dir: C:\Windows
    DirectX Version: DirectX 11
    DX Setup Parameters: Not found
    User DPI Setting: Using System DPI
    System DPI Setting: 96 DPI (100 percent)
    DWM DPI Scaling: Disabled
    DxDiag Version: 6.01.7601.17514 32bit Unicode
    Sound Devices
    Description: Speakers / HP (IDT High Definition Audio CODEC)
    Default Sound Playback: Yes
    Default Voice Playback: No
    Hardware ID: HDAUDIO\FUNC_01&VEN_111D&DEV_76D1&SUBSYS_103C167D&REV_1002
    Manufacturer ID: 1
    Product ID: 100
    Type: WDM
    Driver Name: stwrt64.sys
    Driver Version: 6.10.6365.0000 (English)
    Driver Attributes: Final Retail
    WHQL Logo'd: Yes
    Date and Size: 9/8/2011 05:42:28, 535040 bytes
    Other Files:
    Driver Provider: IDT
    HW Accel Level: Basic
    Cap Flags: 0xF1F
    Min/Max Sample Rate: 100, 200000
    Static/Strm HW Mix Bufs: 1, 0
    Static/Strm HW 3D Bufs: 0, 0
    HW Memory: 0
    Voice Management: No
    EAX(tm) 2.0 Listen/Src: No, No
    I3DL2(tm) Listen/Src: No, No
    Sensaura(tm) ZoomFX(tm): No
    Description: Communications Headphones (IDT High Definition Audio CODEC)
    Default Sound Playback: No
    Default Voice Playback: Yes
    Hardware ID: HDAUDIO\FUNC_01&VEN_111D&DEV_76D1&SUBSYS_103C167D&REV_1002
    Manufacturer ID: 1
    Product ID: 100
    Type: WDM
    Driver Name: stwrt64.sys
    Driver Version: 6.10.6365.0000 (English)
    Driver Attributes: Final Retail
    WHQL Logo'd: Yes
    Date and Size: 9/8/2011 05:42:28, 535040 bytes
    Other Files:
    Driver Provider: IDT
    HW Accel Level: Basic
    Cap Flags: 0xF1F
    Min/Max Sample Rate: 100, 200000
    Static/Strm HW Mix Bufs: 1, 0
    Static/Strm HW 3D Bufs: 0, 0
    HW Memory: 0
    Voice Management: No
    EAX(tm) 2.0 Listen/Src: No, No
    I3DL2(tm) Listen/Src: No, No
    Sensaura(tm) ZoomFX(tm): No
    Sound Capture Devices
    Description: Microphone (IDT High Definition Audio CODEC)
    Default Sound Capture: Yes
    Default Voice Capture: No
    Driver Name: stwrt64.sys
    Driver Version: 6.10.6365.0000 (English)
    Driver Attributes: Final Retail
    Date and Size: 9/8/2011 05:42:28, 535040 bytes
    Cap Flags: 0x1
    Format Flags: 0xFFFFF
    Description: Integrated Microphone Array (IDT High Definition Audio CODEC)
    Default Sound Capture: No
    Default Voice Capture: Yes
    Driver Name: stwrt64.sys
    Driver Version: 6.10.6365.0000 (English)
    Driver Attributes: Final Retail
    Date and Size: 9/8/2011 05:42:28, 535040 bytes
    Cap Flags: 0x1
    Format Flags: 0xFFFFF
    Description: Stereo Mix (IDT High Definition Audio CODEC)
    Default Sound Capture: No
    Default Voice Capture: No
    Driver Name: stwrt64.sys
    Driver Version: 6.10.6365.0000 (English)
    Driver Attributes: Final Retail
    Date and Size: 9/8/2011 05:42:28, 535040 bytes
    Cap Flags: 0x1
    Format Flags: 0xFFFFF
    Please notify me when this issue is fixed.
    Thank you

  • Probook 4530s ATI radeon can't install

    hi all
    after install ati radeon .... black screen appear
    and then go to bios to disable switchable to can start windows . with intel Hd3000
    i download all amd installation for HP site and Amd Site
    probook 4530s core i5
    windows 7 64 bit
    please help me

    Thank you BOSS for your quick response:
    I took your advice and reinstalled my OS, but unfortunately stand-by mode is still causing errors. The only difference is that I managed to install the ATI driver normally and no BSOD, so far.
    I'm not sure what is causing this, but my humble guess would be that my ATI card is an OEM card which is pulled form a working dell computer and these cards sometimes do not integrate well when installed on non dell motherboards... However, I need to find out that that is absolutely the case before I remove my vid. card from my system
    There is a memory dump file that contains the info about this error but I can't decipher...I'm not a computer savvy, but you or someone here my find the root of the problem in that file. If that will be of any help to provide you with I will, next time.
    Thanks in advance!!!

  • HP Pavilion DV6; Black Screen & Atikmpag.sys BSOD with external Monitor

    Hello Guys.
    I have HP Pavilion DV6 Core i7 with ATI Mobility Radeon HD 5650 Graphics Card. Two weeks ago, I started getting continous Atikmpag,sys BSODs. The operating system also started giving me warnings about the hardrive. After a few days, the BSODs got more frequent. Then one day, I was doing normal stuff on my PC and the Display Driver crashed. Instead of recovering, the PC froze. I forced restart my PC but it got worse. The display of my laptop went black. I connected the laptop to external monitor which detected the display. When I tried to load the windows, it started giving me the Atikmpag.sys BSOD on the start up. Now the operating system works fine in the Safe Mode but with nothing on the laptop's screen. The soultions I have tried so far are.
    -Reinstalled the windows thrice
    -Removed the drivers and installed the updated ones a bunch of times.
    -Rolled back the bios to an earlier version
    -Removed the hardrive and tried to load it from an operating system installed on external flash drive
    -Tried loading the PC with linux on external flash drive
    -Opened the laptop and cleaned it thoroughly
    -Removed all the components and plugged them one by one.
    -Removed the old Atikmpag.sys in system32 folder and expanded it with the latest ones.
    -Installed every thing fresh from HP website
    None of these tricks have given me any luck yet. The only way, I could use the operating system in normal mode, is to delete the atikmpag.sys file in safe mode and then log on back in normal mode. I also analysed the minidump file through window debugger and it says that atikmpag.sys is causing this crash with the TDR message. I did all these with an external monitor as the display of the laptop is black since that day.
    Below are the detailed specs of my laptop.
    OS Name: Microsoft Windows 7 (64 bit) Home Premium
    Version: 6.1.7601
    System Model: HP Pavilion Dv6 Notebook PC
    Processor: Intel Core i7 Q 721 @ 1.60 GHz
    Bios Version/Date: Hewlett- Packard F.29, 11/7/2011
    Installed Physical Memory (RAM): 6GB
    Graphics Card: ATI Mobility Radeon HD 5650 1 GB
    I have tried almost every solution available on these forums but still have not gotten any where. I am wondering how could the display, graphics card and hard drive stop working at the same time .
    I would really appreciate if someone colud help me through this problem.
    Thank you
    P.S. Kindly ignore my English mistakes as it is not my first language.

    Hi Goloono,
    Welcome to the HP Forums!
    I would like to take a moment and thank you for using the forum, it is a great place to find answers. For you to have the best experience in the HP forum, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    First I would like to reassure you your English was great, I had no problems understanding you.
    I grasp that you are getting a black screen with the  error message " Atikmpag.sys".
    Here is a link to Troubleshooting Error Messages on a Black Screen that may Occur During Startup or Boot.
    Have you run The HP Support Assistant to help with updates and resolving issues.
    Here is a link to a Microsoft Community Page with this exact issue. There are some suggestions that may help.
    Blue Screen error with atikmpag.sys in Windows 7 .
    Here is a link to the HP software and driver page. You will need to input your exact model of DV6 you have and follow the prompts.  This page will have the recommended drivers and it will list bios updates. if there are any applicable ones.
    HP Drivers & Downloads.
    How Do I Find My Model Number or Product Number?
    At one point you state you had a hard drive error, to rule that out I would run a diagnostics.  SMART Media Test Error Appears when Notebook is Started
    Please let me know if this has helped.
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • HP ProBook 4530s won't power up

    Hi, When I power up the HP ProBook 4530s the power button lights up but the display doesn't come on. It stays that way untilI power the notebook down (nothing is displayed whatover).  The battery is in useless condition and the notebook runs on AC power only. Recently (two weeks before the post) I received the error "The User Profile Service failed the logon. User profile cannot be loaded” error message in Windows 7 and fixed it by booting the computer in safe mode and fixing the registry entries. I can see that the USB port receives power and both the cooling fans (internal and external) are functioning when I power up. Would be deeply gratified if you can help me sort this out. Thanks,Rajasekar Vijayaraghavan

    Hello Amishware,
    Your Probook is a Business model.  Your issue would be best answered on the HP Enterprise Business Community Forums
    Good luck! 
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • Mouse Pad is not working properly while plugged in of Probook 4530s Notebook????

    1. Product Name and Number
    HP Probook 4530s (Intel Core i5). RAM 6 GB, Hard 750 Gb, Radeon 1 GB card,
    Mouse PAD configs ............Synaptics luxpad v7.5,,,,,,,,and........Synaptics luxpad buttons v7.5
     Operating System installed: 
    Windows 7 64 bit Proffessional.
    Everytime I plug in the charger, the mouspad starts hanging................What is that........???? Sometimes it stops working at all..............One thing to note is that right and left click buttons are working fine.........
    Any suggestions......???

    By hanging do you mean it just gets very slow to respond? This only happens when you plug in the charger? I would make sure all your drivers are up to date. Do this happen when the computer is running off battery?
    Thanks
    Sean
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Maybe you are looking for