IGetter option when right click???

I recently downloaded the application iGetter which is download manager for things like rapidshare files. I actually never used this, but when i trashed it, there is still an option for it in safari. When i right click anywhere on page it still says at the bottom of the menu "Download All With iGetter". Is there anyway of getting rid of this?
Thanks.
Message was edited by: dave.miles

Hello dave.miles, you will probably need to consult the makers of iGetter. You probably missed getting rid of .plist files, Application Support files, login items, etc., that were installed by iGetter. You might do a search of your hard drive using "iGetter" or the maker's name to find other files to Trash. Did iGetter installer come with an "Uninstall" option?
Message was edited by: scapesuiter
Message was edited by: scapesuiter

Similar Messages

Where has the "Clean up" "Clean up by" option gone for organizing folders? I just upgraded to OS X Maverick today and noticed it was no longer a option when right clicking; also, it is grayed out in the view tab.

Where has the "Clean up" "Clean up by" option gone for organizing folders? I just upgraded to OS X Maverick today and noticed it was no longer a option when right clicking; also, it is grayed out in the view tab.

Hi i had this problem myself what you need to do is..
right click and press 'show view options'
then go to the arrange by and sort by options near the top and change them both to none
click save as defult at the bottom
then when you right click the clean up by options will now be there
hope this helps

Not able to restore from backup. Only option when right click is "eject"

My iphone 3G crashed and I was told to connect it to iTunes. I did so and it was restored to factory settings. Everything was wiped. Now, when I plug it in, the screen where options are supposed to be is completely blank and when I right-click on the device name, the only option is "eject". New Playlist, Sync, Transfer Purchases, etc are all gone.
Help? Please? How am I supposed to restore anything when that's not even an option and the only option at all is to eject?

it is already ios5.01 i had it upgraded at the genius bar in the apple store.
What i tried doing was restoring it from an earlier backup in time and that one worked . So i manually re added all the files on my computer to my ipod but there is still some missing information like i have to manually redownload all of my apps

Missing options of "Enter Private Browsing" "Open new tab" and "Open new window" when right click (right context menu) firefox icon on taskbar

Missing options of "Enter Private Browsing" "Open new tab" and "Open new window" when right click (right context menu) firefox icon on taskbar.
i already tired complete uninstall and reinstall, but the options are still missing.
print scr: http://www.freeimagehosting.net/9znkp
Thank You in advance for help. Best regards

Hello,
''jstavene wrote:''
can find nothing under the tools menu for private browsing?
Then it's not the same issue.
If Firefox is set to '''Never remember history''', then you're in “permanent private browsing” mode, in which case the menu item ''Stop Private Browsing'' will be grayed out. Perhaps that's the case, and you don't find the menu item easy to see?
* [[Settings for privacy, browsing history and do-not-track]]
If that's not the case, then menu items can be hidden using the userChrome.css file. Check if it exists, and if it's there, rename it, then restart Firefox.
* http://kb.mozillazine.org/UserChrome.css
In Firefox Nightly (what will become Firefox 20), per-window private browsing has been added, so the menu item under the Tools menu is gone. It's been replaced by New Private Window under the File menu. I don't suppose it's very likely that you're using such a cutting-edge test version of Firefox though.
If that doesn't solve the problem, since it's a different issue, it would be best if you would ask a new question.
* https://support.mozilla.org/questions/new

Why, when right click on some link the options "OpenLink in New Tab" and "Open Link in New Window" are exchanged?

Why, when right click on some link the options "OpenLink in New Tab" and "Open Link in New Window" are exchanged?

Dear friend, the problem is that there is exchange of something very useful from users an this break them habits! I'm not interested of forced using of tools! Of course it's good that there is a tool to solve my problem, but this action make me unhappy.
last words - this is the way of losing users.

IMac running 10l7.4. Trackpad won't do right click, none of the 3 options. When right clicked, current screen shrinks to left.

iMac running 10.7.4. Trackpad won't do right click, none of the 3 options. When right clicked, current screen shrinks to left. Seems to be a recurrent design flaw.

Look in System Preferences > Mission Control > set all options in the right column to "-".

Firefox 6. When right clicking a tab no drop-down menu appears. Why do I not have the option to pin, unpin, etc.

I'm using Firefox 6 with all current updates. This is on a desktop pc running Windows XP (Service Pack 3).
At some previous time I was able to pin tabs - I pinned three. Lately I do not have a drop-down menu when right clicking on a pinned or unpinned tab. The feature is just not there.

Try the Firefox SafeMode. 
''A troubleshooting mode, which disables most Add-ons.'' 
''(If you're not using it, switch to the Default Theme.)''
# You can open the Firefox 4/5/6/7 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
# Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. 
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
If it is good in the Firefox SafeMode, your problem is probably caused by an extension, and you need to figure out which one. 
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

When right clicking an image in Bridge, the "open with" option doesn't display Fireworks

This is not the case with all the files, but some. For example, there was a .jpg file that I couldn't open in Fireworks when right clicking and choosing "open with", although Illustrator and Photoshop were both listed. Note: I have Cs5 Extended. Thank you in advance.

The "open with" menu is set in the OS, not Bridge, so open Windows Explorer and work on it from there to add what you want.

Is there a way to bring back the "Open a New Tab" option via right-clicking on the Tab?

I just upgraded to latest version of Firefox (6.0). Yesterday it informed me that an upgrade to Firefox 5.(something) was available and asked if I wanted to upgrade. I went for it. However, I hadn't used it since then till today. Now when I opened it today it asked me if I wanted to upgrade to version 6.0. Without hesitation, I went for it too.
While this version looks nice, it feels a bit odd to use it. Previously whenever I wanted to open a new Tab, I right-clicked on any of the Tabs (active tab or any other Tab) and after right-clicking, it had the option to '''''Open a New Tab''''' along with few other options. Now there's no such option. There's the + button to open a new tab, but what if I want to open a link in a new tab by right-clicking on it? Similarly the option to Open in New Window is also missing.
Is there a way to bring back those previous Tab options/settings? If yes, how?
P.S. In my bookmark toolbar, when I click on a bookmark icon, it has the same options/settings as it previously had in the last version I used (last version I used was 3.something; while I'd upgraded to version 5.something I hadn't used it except for opening the browser when it asked me to upgrade to version 6.0). Options on right clicking the bookmark icon are:
Open
Open in a New Tab
Open in a New Window
New Bookmark...
New Folder...
New Separator
Cut
Copy
Paste
Delete
Properties
I'd also like to mention here that I know of the shortcut keys; so please don't waste your time by trying to help me that way. Thanks.

No. The Tab bar is a regular toolbar in current Firefox versions, so you get the normal right-click context menu of a toolbar if you right-click the tab bar.
You can double click on empty space on the tab bar to open a new tab if you do not want to use the new tab button. 
You can drag a link on that new tab button to open that link in a new tab. 
You can also drag the new tab button on another toolbar if you would like that better. 
Open the Customize window via "View > Toolbars > Customize" or via "Firefox > Options > Toolbar Layout"

Option in "right click menu" to create or combine a PDF is blank. How to restore?

I am using CS6 and have had it installed on this machine for about 2 years. Several months ago I noticed that when right-clicking a file the options to create PDF files is blank but the space in the menu is there and if I click that placeholder, it still functions. Today, I decided to search online to see if anyone else has had this issue and find a way to fix it. Unfortunately, my search has not turned up a solution - could be I just don't quite know what I am looking for to be able to phrase it correctly. Screen shot below to help illustrate the issue.
Do you know if this is related to a particular add-in or program I should be looking at closer?
Trying to think of anything that might have changed around that time and coming up short. We did switch to MS office 365 this fall, but I am not 100% sure if it started at the same time as that move.
Any tips are welcome. Thank you for any assistance!
Gina

Sara, thank you for the advice.
I just used the Repair Acrobat Installation function in the Help menu which concluded with a system restart. This did not make a change to my issue.
With that result, I went ahead and uninstalled Acrobat from my computer with intent to reinstall as suggested. I downloaded Acrobat X Pro from the site and in the installation set up prompts, where it asks for the serial number I enter in the one I have for my whole CS6 program. It is rejecting the number as invalid. I am sure this is because it is for the suite rather than the single program.
How would you suggest I reinstall Acrobat X Pro? or, do I need to reinstall in the whole CS6 suite of programs?
Thanks,
Regina

I am trying to configure my SCXI-1540 card for excitation voltage and frequency using MAX - but it is not giving me that option when I click on the card and then properties, am I looking in the wrong place?

I am trying to configure my SCXI-1540 w/1315 card for excitation voltage and frequency using MAX - but it is not giving me that option when I click on the card and then properties, am I looking in the wrong place?
I have LabVIEW Express 7.0 Professional - SCXI-1000 Chassiss - along with SCXI-1112, and SCXI 1520/1314 - cable to the PCI-6052E is attached to the 1520 card.
MAX says it recognizes all the cards in the chassiss.

Jeremy, Thanks for the reply.
I tried to set up the system as DAQmx.
I had MAX auto-detect the set-up - and it recognized all the cards - but did not select the 1315 accessory on the 1540 card - I had to do that manually - but in the configuration section I would select the accessory and it would deselect itself. I had to get out of the set-up and then right click on the 1540 card and click on the "Accessories" tab and select the 1315 terminal block that way.
It didn't seem right that the system should behave that way, but I pressed onward.
I then tried to create a new DAQmx Task
When I create new DAQmx task and then click on Analog Input no "Position" Tab appears for me to select, all I get are:
Analog>>Voltage
Analog>>Temperature
Ana
log>>Strain
Analog>>Current
Analog>>Resistance
Analog>>Frequency
Analog>>Custom Voltage with Excitation
Do you think there might be something wrong with either my hardware or perhaps my configuration that is not allowing it to recognize the 1540/1315 in DAQmx?
I had included the system report of what programs I am using, etc. as attached file nireport.txt
After the DAQmx did not work I tried installing everything as Traditional DAQ and it did let me set-up the 1540 Card with Excitation Voltage and Frequency and gain - I then went in to the VI that I had built and tried to use the Express DAQ Assisant to read the channel that I am connected to on the 1315/1540 - when I try to use DAQ Assistant it gives me an error saying that "Device not available in NI-DAQmx. It is possible that the device is being use by traditional NI-DAQ"
Which I guess it is since both configurations are now set-up in MAX.
I would PREFER to use the DAQmx set-up, but I am confused as to WHY it won
't come up with
Analog input>>POSITION>>LVDT
When I try to create a new DAQmx task.
Thanks for the help so far! As you can probably tell I am new at this.
Ryan
Attachments:
nireport.txt ‏2 KB

Why does "Link Media" behave differently when used as a keyboard shortcut vs when right clicked???

Not sure whether anyone else is encountering this, but the "Link Media" command behaves differently when right clicked as opposed to when used as a keyboard shortcut.
When you right click to select that option for an offline file, you get only the corresponding disconnected source media. But when you execute "Link Media" via a keyboard shortcut, PP brings up a huge list of all other offline media. Why does it only do that when you use the keyboard shortcut for "Link Media" but not when you right click "Link Media".
I'd like to get the Link Media command to behave via the keyboard shortcut the same way it behaves when right clicked. I don't want to have to deal with relinking a hundred other files, but just the single offline file I'm working on.

Among the alternatives not mentioned... Using a TiVo DVR, rather than the X1; a Roamio Plus or Pro would solve both the concern over the quality of the DVR, as well as providing the MoCA bridge capability the poster so desperately wanted the X1 DVR to provide. (Although the TiVo's support only MoCA 1.1.) Just get a third-party MoCA adapter for the distant location. Why the hang-up on having a device provided by Comcast? This seems especially ironic given the opinions expressed regarding payments over time to Comcast. If a MoCA 2.0 bridge was the requirement, they don't exist outside providers. So couldn't the poster have simply requested a replacement XB3 from the local office and configured it down to only providing MoCA bridging -- and perhaps as a wireless access point? Comcast would bill him the monthly rate for the extra device, but such is the state of MoCA 2.0. Much of the OP sounds like frustration over devices providing capabilities the poster *thinks* they should have.

In my MacBook Pro, finder is crashing after logging in. It is showing crash report with Relaunch option, when i click on Relaunch option finder is working properly but i am unable to see top bar(Apple, Date, Wifi). Even in safari address bar not accepting

In my MacBook Pro(10.7.5), finder is crashing after logging in. It is showing crash report with Relaunch option, when i click on Relaunch option finder is working properly but i am unable to see Top bar(Apple logo, Date and Wifi etc... bar). Even in safari address bar, TextEdit not accepting any text means when type something not showing up and also i am unable operate any thing from keyboard. Plz help me…..

One thing that you can try is installing a 'fresh' version of OS X Lion. Boot into your Recovery partition (holding down the command and R keys whilst booting) and elect to install OS X from the Recovery screen. You need not erase your hard drive and you should not lose any of your data.
Oh, and just as a precaution, I would use Disk Utility, once you're in Recovery mode, to verify your hard drive before trying to install the OS again.
Clinton

In version 9 is there anyway to put the "Open Link in new Tab" back to where it was when right clicking on a link?

The menu editor addon no longer works with FF v9.0.1, is there another way to change the location of the "Open Link in New Tab" contextual menu item when right clicking on a link?

You can do that with code in userChrome.css.
See my post here:
*[[/questions/791244?page=2#answer-161497]]

Error message when right-click on desktpp

Hi.
I get a error message in Win 7 64 pro when right clicking on the desktop to get to settings saying:
"Debug Assertation Failed! Program c:\Windows\system32\igfxsrvc.exe File D:\Program Files\Mirosoft Visual Studio 9.0\VC\ATLMFC\INCLUDE\atlcorn.h
Expression: 0&& "Release called on a pointer that has already been released" For information on how your program can cause an assertation faileure, see Visual C++ doc. on assserts
(Press Retry to debug the application)"
Then I click abort and the message goes away and up pops the settings (I've tried clicking both retry and ignore with no luck) . Highly annoying and appeared after I've installed my brand new x1 carbon with latest drivers and bios with Think Vantage System Update. Anyone know how to solve that??

Hi Nikko69
Here is a couple links for some info on the "Debug Assertion Failure" message you're receiving:
http://forums.lenovo.com/t5/A-M-and-Edge-Series-ThinkCentre/Debug-Assertion-Failed/td-p/797397
http://answers.yahoo.com/question/index?qid=20100407175831AAjMzbZ
http://answers.microsoft.com/en-us/windows/forum/windows_7-system/debug-assertion-failed-error-when-...
I hope this helps you pinpoint a resolution, let us know how it works.
HAPPY HOLIDAYS!!
Be AWESOME Everyday!
Donate KUDOS and Click "Accepted Solution"
Did someone help you today?
Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"
This will help the rest of the Community with similar issues identify the verified solution and benefit from it.

IGetter option when right click???

Similar Messages

Maybe you are looking for