IGNORE - duplicate post

I spent a lot of time chasing this down so thought I'd post something since I didn't immediately find the Metalink note mentioned below.
I migrated a 6i form to 11g then tried to compile the module in Forms builder. It closed on me with no error. I couldn't find any log or error file. Compiling the form with frmcmp gave me an error file but it seemed to randomly stop at different points no matter how many triggers I eliminated. In addition to that, compilation of the PL/SQL didn't cause a crash.
I finally stumbled upon a Metalink note that provided the answer: "An Item's Column Name Property Containing a Long DECODE Function Causes the Forms Compiler to Crash [ID 465970.1]." Sure enough, I had a column name with a decode in it. After I removed that, the compilation succeeded. The solution in the note says to reduce the length to less than 140 - that didn't work for me. I had to remove the decode altogether.
Edited by: Tammy Osborn on Oct 19, 2010 1:13 PM

transact wrote:
The administrator, can he delete this post? Because it's here 3 per.
Thanks.
TransactNo, but you can hit the "edit" button on the first message in the thread and change the subject to something like "Duplicate post, please igonre". These double and triple posts are not that uncommon around here and most people understand (and have done it themselves). It seems to be due to slow response from the server and people hitting "post" button again and again, thinking it didn't "take" the first time.

Similar Messages

  • Duplicate post - please ignore - sorry! :-(

    Duplicate post - please ignore - sorry! :-(

    I hate sites like this. There's no way to get from one
    sublevel to another
    without going to the top level.
    I suggest you not use fly-out-type menus, but instead, have
    subordinate
    sectional navigation on each page within a given section. You
    can easily do
    this with a single template using Library items in an
    editable region for
    the sectional navigation, or better, using server-side
    includes.
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "Andrew_G" <[email protected]> wrote in
    message
    news:e3bcqe$1fc$[email protected]..
    > Hi
    >
    > I have eight categories to display in my site
    navigation.
    > Each category has at least one (some have two) levels of
    subcategories.
    > For example for one of the categories :-
    > Health > Level One.
    > Mens Health > Level Two cascading from this.
    > Prostate Trouble > Level three cascading from Mens
    Health.
    >
    > I only want users to see the level ones (Health in the
    example above) on
    > initial browsing of the site and then by clicking on
    these the associated
    > sub-categories (of that category only) will be
    displayed.
    > How can I organise my navigation using templates or
    libraries to allow
    > this?
    > With only one template it's all or nothing as far as I
    can workout and I
    > suppose what I want is the equivalent of 8 libraries (?)
    to correspond
    > with my
    > 8 navigation headings.
    > I hope this makes more sense to you Dreamweaver experts
    than it does to me
    > reading it back
    > Many thanks
    >
    >

  • DUPLICATE POST - DELETE/IGNORE

    DUPLICATE POST - DELETE/IGNORE
    Message was edited by: BallisticJack

    transact wrote:
    The administrator, can he delete this post? Because it's here 3 per.
    Thanks.
    TransactNo, but you can hit the "edit" button on the first message in the thread and change the subject to something like "Duplicate post, please igonre". These double and triple posts are not that uncommon around here and most people understand (and have done it themselves). It seems to be due to slow response from the server and people hitting "post" button again and again, thinking it didn't "take" the first time.

  • Duplicate post, please ignore

    Hi everybody,
    At first, don't mistake me if my english language is very medium, moliere's language is my native language.
    So I installed Oracle 11g R2 on Linux Platform, and I try to create a new connection via SQL Developer.
    I put login, pass I create while proceeding installation
    and database name on SID
    But I have a TNS error when
    Best regards,
    Transact
    Edited by: transact on 4 déc. 2010 13:48

    transact wrote:
    The administrator, can he delete this post? Because it's here 3 per.
    Thanks.
    TransactNo, but you can hit the "edit" button on the first message in the thread and change the subject to something like "Duplicate post, please igonre". These double and triple posts are not that uncommon around here and most people understand (and have done it themselves). It seems to be due to slow response from the server and people hitting "post" button again and again, thinking it didn't "take" the first time.

  • Duplicate post - ignore please

    duplicate message whoops! please see the other post ;)

    transact wrote:
    The administrator, can he delete this post? Because it's here 3 per.
    Thanks.
    TransactNo, but you can hit the "edit" button on the first message in the thread and change the subject to something like "Duplicate post, please igonre". These double and triple posts are not that uncommon around here and most people understand (and have done it themselves). It seems to be due to slow response from the server and people hitting "post" button again and again, thinking it didn't "take" the first time.

  • Duplicate Post in Error... Apologies

    Duplicate Post. Please ignore.
    If you know how to remove it please let me know though
    Edited by ejb3workshop at 12/05/2007 4:47 AM
    Edited by ejb3workshop at 12/05/2007 4:50 AM

    Duplicate Post. Please ignore.
    If you know how to remove it please let me know though
    Edited by ejb3workshop at 12/05/2007 4:47 AM
    Edited by ejb3workshop at 12/05/2007 4:50 AM

  • Why is duplicate cleaner for iphoto ignoring duplicates?

    Why is this app not working? It worked at first.

    Ignoring duplicates is better than corrupting the iPhoto library. There have been quite a few posts, were an iPhoto library was no longer working after cleaning out duplicates. The better strategy by far would be to avoid importing duplicates. At least, never try it on the only version of your iPhoto library.
    This helped meRe: HELP for IPHOTO IPLM Needed

  • Sorry for duplicate post

    Sorry, I'm new to all this and I just inserted a flash file
    into my dreamweaver html page. the whole page is black, and while
    the movie is loading, there is a large white BOX

    Lee,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Visit http://support.novell.com and search the knowledgebase and/or check all
    the other self support options and support programs available.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://forums.novell.com)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://forums.novell.com/faq.php
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://support.novell.com/forums/

  • How to avoid duplicate posting of noted items for advance payment requests?

    How to avoid duplicate posting of noted items for advace payments request?

    Puttasiddappa,
    In the PS module, we allow the deletion of a component pruchase requisition allthough a purchase order exists. The system will send message CN707 "<i>A purchase order already exists for purchase requisition &</i>" as an Iinformation message by design to allow flexible project management.
    If you, however, desire the message CN707 to be of type E you have to
    modify the standard coding. Doing so, using SE91, you can invoke the
    where-used-list of message 707 in message class CN, and to change the
      i707(cn)
    to
      e707(cn)
    where desired.
    Also, user exit CNEX0039 provides the possibility to reject the
    deletion of a component according to customers needs e. g. you may
    check here whether a purchase order exists and reject the deletion.
    Hope this helps!
    Best regards
    Martina Modolell

  • Duplicate posting of Payment Draft

    Hi
    We are surprised Outgoing Payment Draft is not refreshed automatically or become Closed until we manually tick or untick Open to refresh. There is high risk of mistaking it as open and post again
    yet the system does not prohibit posting of this Draft that is supposed to be closed already.
    We also shocked to know that even Payment Draft of Closed status can be added and posted as new Payment.
    This is too risky of duplicate posting when there are several drafts saved for later posting but each one is not to be repeated in posting. 
    Can we request for this system bug or limitation to be fixed. Is this likely for this problem to be fixed in version 2007B with new patch?
    Kedalene Chong

    Hi Sridhar.
    You need only reverse the duplicate post. Using some this T-codes: MR08, FB08, AB08, FBRA etc.
    Regrads.
    Jandoval Nascimento.

  • Ignoring duplicate Alias in the load rule

    Hi,
    Could anyone tell me how to ignore duplicate alias in the load rule while creating the dimension.
    Thanks,
    Ankoosh

    There is no option in load rule to ignore the duplicate alias. Either you need to modify the source or make aliases as unique by appending member names etc..
    Thanks,
    Naveen Mikkilineni

  • Ignore duplicate records for master data attributes

    dear  experts ,
                   how & where can i  enable "ignore duplicate records" when i am running my DTP to load data
                     to master data attributes.

    Hi Raj
    Suppose you are loading master data to InfoObject and in PSA you have more than one records for Key.
    Let's assume you are loading some attributes of Document NUmber ( 0DOC_NUMBER) and in PSA you have multiple records for same document number. In PSA this is not a problem, as Key for PSA table is technical key and which is different for every record in PSA. But this is a problem for InfoObject attribute table as more than  one records for primary key ( here 0DOC_NUMBER) will create Primary Key consraints in database.
    This issue can be easily avoided by selecting "Handle Duplicate Records" in DTP . You will find this option under *update" tab of DTP.
    Regards
    Anindya

  • Query Tuning - using CASE statement in the WHERE clause - Duplicate Post

    Duplicate Post by mistake.
    Please check
    Query Tuning - using CASE statement in the WHERE clause
    Edited by: Chaitanya on Jun 9, 2011 2:45 AM
    Edited by: Chaitanya on Jun 9, 2011 2:46 AM

    Duplicate Post by mistake.
    Please check
    Query Tuning - using CASE statement in the WHERE clause
    Edited by: Chaitanya on Jun 9, 2011 2:45 AM
    Edited by: Chaitanya on Jun 9, 2011 2:46 AM

  • Duplicate Post

    We create lessons in Captivate that include swf demos that
    someone else records. We import the swf files onto one slide. (In
    the future we're going to do this differently, but we already have
    these lessons buildt and need them out there, like today!). We had
    the problem that if someone advanced to the next slide, the audio
    from the imported animation continued to play, so we added a flash
    stop audio file on a very short slide that the stop demo went to.
    That worked for a long time. It still works for another worker
    doing exactly the same thing with the same stop audio file, but my
    lessons have started doing really weird things.
    First, the first audio slide in some of the lessons started
    stopping after just a few words. I fixed that by creating an
    opening slide with some audio that isn't important (a car reving
    its motor). But as I continued to make changes and publish, now the
    second slide in some lessons is cutting out after a few words also.
    And then, often the audio on the slide AFTER a demo won't play at
    all. And sometimes when I publish it's different than other times.
    And sometimes it works great, then I publish it to our LMS and it
    doesn't work out there. Any ideas?
    I'm going
    crazy!!!!!!

    This is a duplicate post. Please direct responses to the
    original post. You may view the original post by
    clicking
    here.

  • Duplicate post, please delete this one. sorry

    this is a duplicate post. sorry guys, didnt mean to.

    When I encountered this in CP 1 or 2, it was because 'export
    as .zip
    file' (or whatever that option is) was not checked. You gotta
    publish to
    a .zip file to get the supporting SCO files...?
    Erik
    Dana_L wrote:
    > Cap4 did not publish
    > any of the SCORM resources (manifest, SCORM support,
    etc) or zip the files.
    >
    Erik Lord
    http://www.capemedia.net
    Adobe Community Expert - eLearning
    http://www.adobe.com/communities/experts/
    http://www.awaretips.net -
    Authorware Tips!

Maybe you are looking for

  • Error message in app store

    So I am getting a weird error message on my iPhone all of a sudden when trying to update apps: ""your account is not valid for use in the Australian store. You must switch to the U.S. Store before purchasing." I live in NYC. I don't even see an optio

  • What to do If a backup file is corrupt

    Hi! Recently I restored my iPad 2 to factory settings. Before I did that I updated it to iCloud. I went through the standared set-up process. But when restoring from an iCloud back up a message poped up saying that there's a problem with my data and

  • Why Can't I Just Record A Clean Audio Track?

    I am trying to record an audio version of my book. I've got a microphone plugged in, running through a mixer into my Mac, and the audio quality sounds totally clean through my headphones. However, when I record myself talking in Garageband, and play

  • Xcode 3.1.2 and applescript studio...

    Hi everyone! I have been previously unable to upgrade to Xcode 3.1 because when I open my script there is so much empty spacing now inserted between lines and characters and I'm not sure if it's going to be a problem or not. I just tried to upgrade t

  • Is there support for the AC-1000 target real-time system?

    Hi, Is NI supporting the AC-1000 target real-time system? We've used MatrixX, SysBld, Autocode, and Realsim to compile, link, download, and run various control models on the target real-time system for interfacing with hardware. The AC-1000 has 2-3 p