Ignore incoming calls occasionally not working

I've run into odd behavior that happens intermittently on the Tour device.
An incoming call comes in. The user presses the red key to "ignore" the call. The incoming call temporarily halts, but then resumes ringing the phone. Pressing the red "ignore" key again yields the same results. This happens maybe 1 in 5 incoming calls. The rest of the time the red "ignore" key works as it should - rejecting the call.
Is this a known issue in the Tour? Is there a patch or work around?

The Network Preference is checked, to Notify me of incoming calls while connected to the internet.

Similar Messages

  • IPhone 5 outgoing and incoming SMS works but incoming calls do not work. The dialler gets message this number is not in available in network.

    New I phone outgoing calls as well incoming SMS works but can not receive incoming calls. Caller gets the number does not exist in network.

         Like Superman, here I am to save the day! I can help you with your service in your home area dizzymslizzie. Let's start with what zip code are you in? Can I assume that there isn't any physical or liquid damage on the iPhone 5? Recently, there has been an update to the iPhone to iOS 7. If you have done this update then please provide the exact carrier version that's installed. Keep in mind that there is a difference in device performance between iOS 7 and the iOS 7 beta version. As you share this info, I will check the area to re-affirm that the issue is or is not network related.
    Thank you...
    ArnettH_VZW
    Follow us on Twitter @VZWSupport

  • For incoming calls ringtone not working

    My incoming calls are only identifiable with display to ANSWER or DECLINE.   I. Can get vibrate to work  but ringtones not working.  I am missing many calls
    because of no ring.  I did shut down my Bluetooth earpiece so unsure what happened.

    These are a couple of articles that might help.
    http://docs.info.apple.com/article.html?artnum=305740
    http://docs.info.apple.com/article.html?artnum=305744
    Try a reset first then if that does not work, you might want to restore.

  • CALLER ID not working for International incoming calls

    Hi,
    I've a strange issue where CALLER ID not working for International incoming calls, it shows INTERNATIONAL UNKNOWN NUMBER in the phone display, but the number shows correclty in Verizon Call assistant !!!
    Any clue?

    yashshankar wrote:
    Hi
    I recently  purschased an Online number but the caller id does not work for incoming calls.How do we resolve this problem?.
    Regards
    Yash
    You didn't mention what country your Online Number is in.  Not all of Skype's Online Numbers are eligible for use as Caller ID when calling telephones or sending SMS messages.  If your number is from one of these countries (Chile, Denmark, Estonia, Hong Kong, Poland, Sweden, the UK and the US), then it can be used this way.  Otherwise, you can use a mobile number from countries other than Japan or Mexico as Caller ID with Skype, after the number goes through a verification process where Skype sends SMS messages with codes to that number.
    To get to these settings, log into your Skype account here on the Skype web site using the "Account" link at the top of this page.  You'll see a screen that would include your current Caller ID settings, and a link to change that.  If your Online Number is from one of those countries I referenced above, just select it and you're done. 
    Hope that helps!
    Patrick
    Location/Ubicacion: Arizona USA
    Time Zone/Hora Local: UTC/GMT -7
    If this message has adequately addressed your issue, please click on the “Accept as Solution” button. If you found a post useful then please "Give Kudos" at the bottom of my post, so that this information can benefit others.
    Si esto mensaje le ha ayudado, por favor haga clic en "Aceptar como solución". Si encuentra un mensaje útil, por favor "Da Kudos" al final del mensaje, por lo que esta información puede beneficiar a otros.
    I am not a Skype employee. No soy un empleado de Skype.

  • After update to IOS 4.3.5 my Iphone incoming and out going calls is not working properly and I have to remove the SIM regulerly to conduct or receive a call

    after update to IOS 4.3.5 my Iphone incoming and out going calls is not working properly and I have to remove the SIM regulerly to conduct or receive a call
    It is not practicale to do this always any one faces the same problem

    There may be a problem with the SIM card. Get a new SIM card from your carrier - there should be no charge for a replacement.
    If no change with a new SIM card, the standard troubleshooting steps in order are:
    Power your iPhone off and on.
    An iPhone reset, which is done by pressing and holding the home button and the sleep/wake or on/off button simultaneously until you see the Apple logo and then release.
    Restore your iPhone with iTunes from your iPhone's backup.
    Restore your iPhone with iTunes as a new iPhone or not from your iPhone's backup.
    If no change after any of these steps in order, your iPhone has a hardware problem.

  • Incoming sip calls are not working but outgoing is working with cme

    I have CME setup with voip.ms on my 2800 router, my outgoing calls are working  but my incoming calls are not.  Below is my config, please let me know if it is something with my config:
    voice translation-rule 3
     rule 1 /^9142281\(...\)$/ /\1/
    voice translation-profile INCOMING_CALL_1
     translate called 3
    dial-peer voice 1 voip
     translation-profile incoming INCOMING_CALL_1
     session protocol sipv2
     session target sip-server
     incoming called-number .%
     voice-class codec 1
     dtmf-relay rtp-nte
     no vad

    I made the change, but I am getting no output from debug voip ccapi inout.  What does concern me from debug ccsip messages is:
    Aug 31 12:42:04.195: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
    Sent:
    SIP/2.0 400 Bad Request - 'Invalid Host'
    Via: SIP/2.0/UDP 107.6.67.238:5060;branch=z9hG4bK000d3c36;rport
    From: "+19144410197" <sip:[email protected]>;tag=as7439b9c1
    To: <sip:[email protected]:1061>;tag=829C8-2532
    Date: Sun, 31 Aug 2014 12:42:04 GMT
    Call-ID: [email protected]:5060
    CSeq: 102 INVITE
    Allow-Events: telephone-event
    Reason: Q.850;cause=100
    Server: Cisco-SIPGateway/IOS-12.x
    Content-Length: 0
    I also am getting this:
    voicertr2#debug ccsip error
    SIP Call error tracing is enabled
    voicertr2#
    Aug 31 12:45:07.359: //-1/xxxxxxxxxxxx/SIP/Error/sipSPI_validate_own_ip_addr: ReqLine IP addr does not match with host IP addr
    Aug 31 12:45:07.359: //-1/78AE76E98009/SIP/Error/sact_idle_new_message_invite: Invalid URL in incoming INVITE

  • Can't ignore incoming call

    When I get an incoming call I can not drag the puzzle piece to the red puzzle piece to ignore the call. It only allows me to drag it to the green puzzle piece to accept the call. I have to wait till the call quits ringing to continue whatever I was doing on the phone. I have tried hard and soft resets because of screen timeout issues I am having, but I still can not use the ignore feature on calls. Sometimes I get an actual ignore and answer button for incoming calls and they work. Does anyone know how to switch to those all the time and get rid of the puzzle pieces?

    On my phone, there's an empty puzzle piece that I drag my selection into.  So, if I want to ignore, I drag the ignore puzzle piece into the empty gray space.
    As for when the puzzle vs. buttons appear, when your phone is inactive, the puzzles appear.  When you're actively using your phone, you get the buttons.
    You could swap from the puzzles to the sliding glass option to see if that helps you any.  You can change that by going into the display settings under Sound and display and selecting the Unlock screen option.  Doing this will change your answering options from the puzzles to a sliding option.  You will have the green answer and the red reject sliding icons that you slide across the screen.  Maybe this will work for you?  There's also a third option to ignore the call with a message or something like that.  It won't give you an option to silence the call (make it stop ringing), but your volume button will take care of that, so there's really no reason for it.
    Hope that helps.

  • Caller display not worked since June 2014

    On 26/06/14 I reported a fault (VOL-**********) that the caller display function had stopped working following a thunderstorm in the area. According to the fault status this fault is showing as being corrected and closed on 02/07/14 when in fact the fault still exists. I tested the line using the BT test socket with a new BT2000 phone and this displayed ‘incoming call’ therefore my internal wiring is not part of the problem. I have also dialled the test code *#234# to check if the caller display service is available and confirmed that it is. I then tested the new BT2000 phone on the neighbour’s telephone line and this showed the caller ID for incoming calls, as did my other telephone as well; therefore none of the telephone handsets are at fault. Three times BT have informed me that the fault has been fixed and yet I still have no caller display. Reading through the forums it would appear that other people have encountered similar issues and that the problem is at the exchange, “An Openreach engineer discovered that the RS232 burst transferring the CLI number up the line was too weak and he then went down to the exchange to investigate. He then discovered that the fault lay in the ADSL device which lies between the analogue exchange equipment and the outgoing line”. 
    I’m surprised to see that BT are taking so long to trace a fault in their system last raised 5/8/2014 (VOL012-**********) and that they haven’t sent an engineer to the property or to the exchange to check the problem.
    My patience is wearing thin over this problem with my Caller Display not working as it started in mid June. I’m also becoming less enthusiastic about BT and find it harder to recommend them to others.
    My last message from BT, tells me that it should be back to normal on the 8 August. However, it is still not working. Their message that my phone should be back to normal now and if it isn’t report this to BT, is ridiculous. If an engineer had investigated what was causing the fault and found it, then he would have fixed it. However, either an engineer has not investigated the fault or BT is not competent in fixing their own service faults and makes these statements with crossed fingers?

    An engineer called yesterday and told me that he had been asked to test the line for a voice fault not a Caller Display fault. However, his testing revealed there is no line fault, CLI signal is strong and he was happy that the new BT2000 phone (bought after the lightning strike) is working properly. (This phone had also been tested on a neighbour’s phone line where it displayed the callers number). He also found that this same BT2000 phone on my line was not displaying the Caller’s number (CLI), but couldn’t offer any reason why.
    I conjectured with him that these tests must bring the problem down to a corrupted CLI signal which does not allow the phone to understand the phone number being sent.
    When the lightning struck the phone line back in June, it blew the telephone connection in the back of the Sky Box with a flash and bang (telephone cable now removed from the Sky box). It shorted the Openreach Faceplate (now replaced) so that the phones and broadband stopped working and it caused the phone to light up and react as it does when a call comes through.
    Now isn’t it possible that the lightning also travelled along the copper wire to the green cabinet just outside the house and damaged something there which is corrupting the CLI signal, but which does not not show up when the voice line is tested? If not, then there must be a problem further back in the infrastructure, possibly in the Exchange, that is causing a corrupted signal to be sent to my phone?
    He told me that another team would have to investigate the Caller Display fault as he was instructed to look into a voice issue and as a field engineer he was not able to investigate any problem that might be in the Exchange. I don’t know whether this Exchange Team would be able to investigate a problem in the Cabinet if nothing is found in the Exchange or can that only be done by a field engineer? He told me to contact BT again as he’d done all that he had been instructed to do and they would have to instigate a fault team to further investigate the problem.
    When all this is considered we have the basic problem that BT are unable to provide me with a Privacy and Caller Display Service that I have been paying for, because of a fault in their infrastructure. How much longer is it going to take before they correct the problem that’s been going on since June 2014?

  • Skype numbers are BROKEN incoming calls do not rin...

    I paid for a Skype number.  It used to work fine, people would call, and Skype would play the ringtone and I would answer. 
    NOW IT'S BROKEN. 
    One of the latest releases of Skype broke this and there is no Skype support to report and get problems fixed.  This is mentioned many times in these forums and Skype will not address the issue.   Just search for "incoming calls do not ring"

    I am having this issue with an iphone 5/iOS 6. I can receive calls without issue when I have the Skype App open, but if it is in the background, the caller gets a message like "The person you are trying to reach is not available." if voice mail is turned on, or the phone just rings and rings if I have voice mail turned off.
    I've confirmed that alerts and other settings in Notification Center are setup as expected. Not sure why this isn't working.

  • Incoming calls are not ringing or activating the "...

    As stated in the subject box. Incoming calls do not ring. Also the text box indicating incoming calls does not show up on the screen either. The only way I know a call has come in is when it goes to voice mail.

    Ever since iOS5 the ringer and display does not work. No notifications.
    I live in a gated community and the gate is assigned to my Skype number. I also have clients who call me and they aren't getting through.
    If I have to purchase a land line, I will sue in small claims for the cost of the service and loss of service.
    Do not waste anyone's time with cookie-cutter answers.
    My Skype isn't ringing nor shows up on the screen ever since iOS5. You should have been working on this with the developer packs.
    I've deleted and reinstalled 3x. It is running. Volume is correct.
    This is outrageous as I pay for Skype and am thinking of canceling and demanding a full refund.
    You are pushing things towards class litigation here in the US. There is no excuse.
    Microsoft now owns Skype. They are a US corporation and are liable.
    iPhone4
    iOS5
    Skype 3.5.117(3.5.0.117)
    Notifications: Sound ON Alerts ON
    Volume is at 100%
    Ringer is at 100%

  • BT 6500 answerphone - call screening not working

    Hi all,
    I wanted an answerphone that can be set to be un-obtrusive as possible, and completely silent when needed, so I went for the 6500 as it advertises a do not disturb feature:
    1 -  Do not disturb mode - this works, but is pretty cumbersome to enable / disable (menu, call control, <Pin Number>,incoming calls, do not disturb,On/off, Save ) so hardly conducive to easy acces / daily use. Dissapointed there is not a simple button control on the base station to turn this mode on or off (like the answerphone on/off button would have been ideal).
    2 - I tried to turn call screening off via the menu (Answer phone, settings, call screening, Off), but when the phone rings, the answerphone answers after 4 rings, and the answer message still plays out loudly, and then you can hear the caller leave their message. So call screening option doesnt appear to work?
    3 - When the caller hangs up, the answer phone base station plays "THANK YOU FOR CALLING" - seems very stupid and pointless thing to do, seeing that the caller cannot hear this message. To me it's just more needless noise, dissapointing, I wonder if it can be turned off?
    So I'm hoping that at least point 2 is just me not setting it up correctly? Has anyone else tried to turn off call screening on this phone? 
    Thanks,
    Simon.
    Solved!
    Go to Solution.

    So I found out a bit more....
    The "Call screening" option refers to the phone handset, not the base station! But there is a volume control on the base station, so you can turn the volume down to zero et voila! You dont hear the answerphone message or incoming calls, perfect!
    So I can also achieve pretty much what I wanted now without needing to fuss with the do not disturb option:
    1 - Base statio nvolume to zero
    2 - Turn off base station ringer (so have to rely only on handset ringer)
    3 - Handset has an easy access mute functio (press & hold *) - so easy to toggle the whole system on/off silent mode.
    So there are enough features, just, to achieve what I wanted to do.

  • I am facing issue in Receiving incoming calls, Name not getting displayed though the same has been saved in my phone book!! I have done sync from Windows contacts.. please help if some1 knows how to rectify the issue...

    I am facing issue in Receiving incoming calls, Name not getting displayed though the same has been saved in my phone book!! I have done sync from Windows contacts.. please help if some1 knows how to rectify the issue...

    Has your carrier been having issues with Call Display? Do the telephone numbers come up when people call, or does it just show 'Unknown Number' or 'Blocked' ?

  • Caller id not working after syncing my iphone to my pc?

    caller id not working after syncing my iphone to my pc?

    Syncing with iTunes has nothing to do with this, especially when not syncing contacts with a supported address book app on your computer which very few Windows users seem to be inclined to do.
    Caller ID is not working in which way?

  • My iphone 6 connects to the car via bluetooth, the music works good, but the phone calles does not work.  It looks like it is working but doesn't.  I have tried in my Hyundai and a Dodge rent car and get the same results.  I updated the last 8.0.2.

    My iphone 6 connects to the car via bluetooth, the music works good, but the phone calls does not work.  It looks like it is working but doesn't.  I have tried in my Hyundai Sonata and a Dodge Dart rent car and get the same results.  I updated the last 8.0.2.  It worked the first day i had the phone, and then i updated to Ios 8.0.2 and it quit working.
    Now when i get in the car, it acts like it is connected and makes the same call it was on after syncing to bluetooth, but it really isn't on a call.  This is happening on both cars.
    Does anyone know if this is the phone and i need to take it to Apple or if there is an issue that Apple is working on getting a fix for?
    My son in law has the exact same phone as me, we both got the on 10/6, he had a Dodge Dart and his is working via bluetooth.
    Someone HELP please, as i consider this a safety issue by not having my calls go to bluetooth.

    We had the same problem, but figure out the solution.
    You MUST have at least 1 song added to your ITUNE!  After you add a free song, then everything else should work as normal!
    Hope this helps!

  • Skype click to call is not working in Safari 6 wit...

    My Skype click-to call is not working on Safari 6 with OS X 10.7.4.  The number highlights, but when I click on the number, nothing happens. I do have Skype installed on the computer and it works fine. I am running Skype for the mac 5.8.0.1027 and skype extension for safari 2.1.0.10405. I have two other macs which are running OS X 10.6.8 and Safari 5.1.7 and the click to call (2.1.0.10405) works great on both of those. I can not get it to work on the mac running Lion. Any help? Thanks

    I reverted back to Safari 5.1.7 from Safari 6 and now Click To Call works.
    For anyone wondering how I did this, you can view instructions here:
    http://apple.stackexchange.com/posts/59342/revisions
    I am new to using Macs and was able to follow these simple instructions. Takes a while for Pacifist to install 5.1.7, but it's worth it to have Click To Call working now.
    You will not be able to do this if you have Mountain Lion as Mountain Lion requires Safari 6.
    Lastly, the next time you update your Mac and it asks if you want to upgrade to Safari 6, say NO. At least not until you see that a fix has been posted here in these forums by either Skype or Apple.
    P.S. I posted this reply using OSX 10.7.4 and Safari 5.1.7

Maybe you are looking for