Ignoring discovery request - AP on dynamic client interface
Hi All,
I have a questing regarding the AP Management Port on the 5508.
At our customers side there are some FAT-APs and we want to migrate them to the controller.
There is no DHCP Service active on the network (security-restriction by our customer) and the FAT-APs and Clients are configured with a static IP.
There is no LAG active everything is on Port 1.
Now after upgrading one AP to lightwight-mode,... he cannot discover his WLC (thats ok, because the Manament Interface is in a different subnet)
So I configured a IP-Helper and the neccesary udp-Port to get the AP joined on the WLC.
But on the Controller I get the following message:
%CAPWAP-3-DISC_INTF_ERR2: Ignoring discovery request received on a
wrong VLAN ([dec]) on interface ([int]) from AP
[hex]:[hex]:[hex]:[hex]:[hex]:[hex]
The wrong VLAN in the message is a dynamic Interface on the Controller for client and the AP is in that Subnet.
It its created as an Dynamic Interface on the WLC (without "Enable Dynamic AP Management")
I hope you can give me a hint. I'm not sure if I should enable "Dynamic AP Management" on that Client Interface.
By the way, the AP can join when i configure the Controller IP via console on it. But that should not be the solution
Thanks &
Best regards,
Simon
Hi Nicolas,
thanks for your reply.
I know, that this design is not "best practice".
Our customer has a LAN which has to be completly redesigned.
They use very huge subnets for their different production segments (255.255.240.0) and everything is in there.
The Autonomous AP Installation is in one of these huge network segments where the APs and the clients are in the same subnet..
Thats the background why this szenario is created.
I know that this design is absolutly unsatisfactory.
But thats the fact and I have to deal with this.
The helper is the WLCs Management Adress.
So what about the "ignoring discovery request" message.
Is there some possibility to get it work this way or is the only way to upgrade the APs via Console to get them to the controller.
I know the best way would be to get the APs in a new different subnet,...
regards,
Simon
Similar Messages
-
WLC 5508 - Ignoring Primary discovery request received on non-management interface (2) from AP
Hello,
Im receving this error on my syslog server:
capwap_ac_sm.c:1443 Ignoring Primary discovery request received on non-management interface (2) from AP
already checked the configuration and everything seems ok. They are registered and with clients associated.
What could be the cause?
Thanks in advance,
ChrisThanks Scott for your fast response.
No, I'm not using LAG.
What do you mean with separate AP Managers?
I have one AP Manager on vlan 100 (10.100.0.25) and the Management interface on the same Vlan (10.100.0.26)
And users use vlan 150 (10.150.0.x).
The switch port where the AP is plugged is configured with:
interface GigabitEthernet2/0/20
switchport access vlan 100
switchport mode access
spanning-tree portfast
On WLC I can also check the AP history:
Last Error Occurred Reason Layer 3 discovery request not received on management interface -
LWAPP Discovery request - discarded ?
Greetings all,
I'm starting to grow a huge headache over a WLC-implementation (4402-12). From my point of view, the controller seems to be configured correctly and the DHCP-scope has been set up with the correct pointers as well as as the DNS-record, all pointing towards the AP-Manager i/f (tagged vlan20 on port 1, mgmt untagged) - still, no access-points will associate. The AP is pingable from the controller. A debug of lwapp events and details shows the following;
Sat Jan 7 19:36:17 2006: Received a message from AP of length 97 on inteface = 1
Sat Jan 7 19:36:17 2006: Entered spamGetLCBFromMac file spam_lrad.c line 433**
Sat Jan 7 19:36:17 2006: Received LWAPP DISCOVERY REQUEST from AP 00:0b:85:5a:bd:50 to ff:ff:ff:ff:ff:ff on port '1'
Sat Jan 7 19:36:17 2006: Discarding L3 Mode LWAPP DISCOVERY REQUEST on intf '1', vlan = '20', Management vlan = '0'.
Anyone with a clue regarding what might be causing this? I'm also a little confused regarding the destaddr (bcast) since the AP should've received the ucast address of the controller. We have to handover this system to the cust. fairly soon .. :-)
WLC Version: 3.2.78.0
TIA & Best regards,
/MYou need to use the Management Interface for LWAPP controller discovery. That's what the WLC expects. So when it sees an LWAPP Discovery Request coming in on another interface, it discards its.
In L3 LWAPP mode, the AP tries to find a WLC using IP subnet broadcast, over the air provisioning (OTAP), DHCP Option 43, DNS, and WLC IP addresses stored in memory. It will always use ALL of these techniques. That's why you're seeing the broadcast. From the LWAPP Discovery Responses it selects a controller to join.
Now, you would've seen it join in L2 mode because the AP does an Ethernet "broadcast" to find the WLC. Hence, the mgmt interface sees the LWAPP Discovery, and responds with an Ethernet frame. At L2 mode, all LWAPP is Ethernet encapsulated as opposed to IP encapsulated. When you switched back to L3 mode, the AP remembers the management IP address of the WLC from the L2 join and uses that. That's why it worked after switching L3-->L2-->L3.
Hope this helps. -
3702i AP's not Joining WLC - Layer 3 discovery request not received on management VLAN
Hi Guys,
This is a follow up post to this thread: https://supportforums.cisco.com/discussion/12400481/3702i-not-joint-2504
Have been playing around with my AP's and made sure the time is correct on all the devices ( WLC and Switch). I have also moved the AP's to the same Vlan as the management IP of the WLC.
if I move the AP's to the same Vlan as the WLC they join and are happy, as soon as I move them to a different Vlan they cant join and there time goes back to the default plus they do not seem to save the WLC details to flash but still remember the test names I give them.
it appears that option 43 is working fine as I can see it look for the WLC IP and I have done some trouble shooting on the WLC and it looks like it see's the AP but doesn't except it.
please see below for the boot up of the AP and the WLC logs:
AP
IIOS Bootloader - Starting system.
*** deleted for breverity *****
Loading "flash:/ap3g2-k9w8-mx.153-3.JA1/ap3g2-k9w8-mx.153-3.JA1"...#########################
File "flash:/ap3g2-k9w8-mx.153-3.JA1/ap3g2-k9w8-mx.153-3.JA1" uncompressed and installed, entry point: 0x2003000
executing...
Secondary Bootloader - Starting system.
Montserrat Board
*** deleted for breverity *****
Boot CMD: 'boot flash:/ap3g2-k9w8-mx.153-3.JA1/ap3g2-k9w8-xx.153-3.JA1;flash:/ap3g2-k9w8-mx.153-3.JA1/ap3g2-k9w8-xx.153-3.JA1'
Loading "flash:/ap3g2-k9w8-mx.153-3.JA1/ap3g2-k9w8-xx.153-3.JA1"...###############################################
File "flash:/ap3g2-k9w8-mx.153-3.JA1/ap3g2-k9w8-xx.153-3.JA1" uncompressed and installed, entry point: 0x1003000
executing...
*** deleted for breverity *****
cisco AIR-CAP3702I-Z-K9 (PowerPC) processor (revision A0) with 376810K/134656K bytes of memory.
Processor board ID FGL1838X4T1
PowerPC CPU at 800Mhz, revision number 0x2151
Last reset from power-on
LWAPP image version 8.0.110.0
1 Gigabit Ethernet interface
2 802.11 Radios
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: F4:4E:05:B7:1E:84
Part Number : 73-15243-01
PCA Assembly Number : 000-00000-00
PCA Revision Number :
PCB Serial Number : FOC18343WPR
Top Assembly Part Number : 068-05054-03
Top Assembly Serial Number : FGL1838X4T1
Top Revision Number : A0
Product/Model Number : AIR-CAP3702I-Z-K9
% Please define a domain-name first.
Press RETURN to get started!
*Mar 1 00:00:19.295: %SOAP_FIPS-2-SELF_TEST_IOS_SUCCESS: IOS crypto FIPS self test passed (15)
*Mar 1 00:00:19.755: Registering HW DTLS
*Mar 1 00:00:19.763: APAVC: Initial WLAN Buffers Given to System is 2500
*Mar 1 00:00:19.815: APAVC: WlanPAKs 42878 RadioPaks 42270
*Mar 1 00:00:22.127: %LINK-6-UPDOWN: Interface GigabitEthernet0, changed state to up
*Mar 1 00:00:26.055: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 0 (4)
*Mar 1 00:00:26.167: Loading Power Tables from ram:/Q2.bin. Class = A
*Mar 1 00:00:26.167: record size of 3ss: 1168 read_ptr: 4F9698E
*Mar 1 00:00:31.207: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 1 (4)
*Mar 1 00:00:31.251: Loading Power Tables from ram:/Q5.bin. Class = Z
*Mar 1 00:00:31.251: record size of vht: 2904 read_ptr: 4F9698E
*Mar 1 00:00:31.407: Wait until the stile protocol list is initialized.
*Mar 1 00:00:32.651: Start STILE Activation
*Mar 1 00:00:34.571: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0, changed state to down
*Mar 1 00:00:35.447: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C3700 Software (AP3G2-K9W8-M), Version 15.3(3)JA1, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2014 by Cisco Systems, Inc.
Compiled Fri 19-Dec-14 11:20 by prod_rel_team
*Mar 1 00:00:35.447: %SNMP-5-COLDSTART: SNMP agent on host Test_1 is undergoing a cold start
*Mar 1 00:00:36.563: %LINEPROTO-5-UPDOWN: Line protocol on Interface BVI1, changed state to up
*Mar 1 00:00:37.787: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to uplwapp_crypto_init: MIC Present and Parsed Successfully
*Mar 1 00:00:37.939: %SSH-5-ENABLED: SSH 2.0 has been enabled
*Mar 1 00:00:37.939: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to up
*Mar 1 00:00:38.987: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
*Mar 1 00:00:38.987: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to down
*Mar 1 00:00:47.567: %LINK-6-UPDOWN: Interface BVI1, changed state to down
*Mar 1 00:00:48.567: %LINEPROTO-5-UPDOWN: Line protocol on Interface BVI1, changed state to down
*Mar 1 00:00:50.431: %SOAP_FIPS-2-SELF_TEST_HW_SUCCESS: HW crypto FIPS self test passed (2-16)
*Mar 1 00:00:50.431: DPAA Initialization Complete
*Mar 1 00:00:50.431: %SYS-3-HARIKARI: Process DPAA INIT top-level routine exited
*Mar 1 00:00:51.431: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0, changed state to up
*Mar 1 00:00:53.435: %LINK-6-UPDOWN: Interface BVI1, changed state to up
*Mar 1 00:00:53.867: Currently running a Release Image
*Mar 1 00:00:54.287: Incorrect certificate in SHA2 PB !
*Mar 1 00:00:54.287: Using SHA-1 signed certificate for image signing validation.
*Mar 1 00:00:54.575: %LINEPROTO-5-UPDOWN: Line protocol on Interface BVI1, changed state to up
*Mar 1 00:00:59.787: %DHCP-6-ADDRESS_ASSIGN: Interface BVI1 assigned DHCP address 10.1.20.2, mask 255.255.255.0, hostname Test_1
*Mar 1 00:01:02.707: APAVC: Succeeded to activate all the STILE protocols.
*Mar 1 00:01:02.707: APAVC: Registering with CFT
*Mar 1 00:01:02.707: APAVC: CFT registration of delete callback succeeded
*Mar 1 00:01:02.707: APAVC: Reattaching Original Buffer pool for system use
*Mar 1 00:01:02.707: Pool-ReAtach: paks 42878 radio42270
%Default route without gateway, if not a point-to-point interface, may impact performance
*Mar 1 00:01:10.103: AP image integrity check PASSED
*Mar 1 00:01:10.187: Incorrect certificate in SHA2 PB !
*Mar 1 00:01:10.203: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
*Mar 1 00:01:10.203: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to reset
*Mar 1 00:01:11.591: %CDP_PD-4-POWER_OK: 15.4 W power - NEGOTIATED inline power source
*Mar 1 00:01:12.691: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up
*Mar 1 00:01:13.691: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
*Mar 1 00:01:13.947: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to up
*Mar 1 00:01:14.947: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to up
*Mar 1 00:01:20.211: %SYS-6-LOGGINGHOST_STARTSTOP: Logging to host 255.255.255.255 port 514 CLI Request Triggered
Translating "CISCO-CAPWAP-CONTROLLER"...domain server (255.255.255.255)
*Mar 1 00:01:31.215: %CAPWAP-5-DHCP_OPTION_43: Controller address 10.1.1.231 obtained through DHCP
*Mar 1 00:02:11.599: %CDP_PD-4-POWER_OK: Full power - NEGOTIATED inline power source
*Mar 1 00:02:11.603: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to down
*Mar 1 00:02:11.611: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
*Mar 1 00:02:12.603: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
*Mar 1 00:02:12.639: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up
*Mar 1 00:02:12.647: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to down
*Mar 1 00:02:12.655: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to reset
*Mar 1 00:02:13.639: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
*Mar 1 00:02:13.647: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to down
*Mar 1 00:02:13.699: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to up
*Mar 1 00:02:14.699: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to up
Not in Bound state.
*Mar 1 00:02:44.719: %CAPWAP-3-DHCP_RENEW: Could not discover WLC. Either IP address is not assigned or assigned IP is wrong. Renewing DHCP IP.
*Mar 1 00:02:49.839: %DHCP-6-ADDRESS_ASSIGN: Interface BVI1 assigned DHCP address 10.1.20.3, mask 255.255.255.0, hostname Test_1
Translating "CISCO-CAPWAP-CONTROLLER"...domain server (255.255.255.255)
*Mar 1 00:02:55.719: %CAPWAP-5-DHCP_OPTION_43: Controller address 10.1.1.231 obtained through DHCP
Not in Bound state.
*Mar 1 00:03:59.219: %CAPWAP-3-DHCP_RENEW: Could not discover WLC. Either IP address is not assigned or assigned IP is wrong. Renewing DHCP IP.
*Mar 1 00:04:04.343: %DHCP-6-ADDRESS_ASSIGN: Interface BVI1 assigned DHCP address 10.1.20.4, mask 255.255.255.0, hostname Test_1
Translating "CISCO-CAPWAP-CONTROLLER"...domain server (255.255.255.255)
*Mar 1 00:04:10.223: %CAPWAP-5-DHCP_OPTION_43: Controller address 10.1.1.231 obtained through DHCP
WLC:
isco Controller) >show time
Time............................................. Tue Jan 27 17:44:47 2015
Timezone delta................................... 0:0
Timezone location................................ (GMT +8:00) HongKong, Bejing, Chongquing
NTP Servers
NTP Polling Interval......................... 3600
Index NTP Key Index NTP Server NTP Msg Auth Status
1 0 150.101.176.226 AUTH DISABLED
(Cisco Controller) >show ap join stats summary
Incorrect input! Use 'show ap join stats summary [all/<ap-mac>]'
(Cisco Controller) >show ap join stats summary all
Number of APs.............................................. 2
Base Mac AP EthernetMac AP Name IP Address Status
f4:4e:05:aa:a6:a0 f4:4e:05:94:c3:98 APf44e.0594.c398 10.1.1.22 Joined
f4:4e:05:b6:ce:f0 N A Test_1 10.1.20.7 Not Joined
(Cisco Controller) >show ap join stats detailed f4:4e:05:b6:ce:f0
Sync phase statistics
- Time at sync request received............................ Not applicable
- Time at sync completed................................... Not applicable
Discovery phase statistics
- Discovery requests received.............................. 45
- Successful discovery responses sent...................... 21
- Unsuccessful discovery request processing................ 24
- Reason for last unsuccessful discovery attempt........... Layer 3 discovery request not received on management VLAN
- Time at last successful discovery attempt................ Jan 27 17:45:49.705
- Time at last unsuccessful discovery attempt.............. Jan 27 17:45:49.705
Join phase statistics
- Join requests received................................... 0
- Successful join responses sent........................... 0
- Unsuccessful join request processing..................... 0
- Reason for last unsuccessful join attempt................ Not applicable
- Time at last successful join attempt..................... Not applicable
- Time at last unsuccessful join attempt................... Not applicable
Configuration phase statistics
--More-- or (q)uit
- Configuration requests received.......................... 0
- Successful configuration responses sent.................. 0
- Unsuccessful configuration request processing............ 0
- Reason for last unsuccessful configuration attempt....... Not applicable
- Time at last successful configuration attempt............ Not applicable
- Time at last unsuccessful configuration attempt.......... Not applicable
Last AP message decryption failure details
- Reason for last message decryption failure............... Not applicable
Last AP disconnect details
- Reason for last AP connection failure.................... Not applicable
- Last AP disconnect reason................................ Not applicable
Last join error summary
- Type of error that occurred last......................... Lwapp discovery request rejected
- Reason for error that occurred last...................... Layer 3 discovery request not received on management VLAN
- Time at which the last join error occurred............... Jan 27 17:45:49.705
AP disconnect details
- Reason for last AP connection failure.................... Not applicable
Ethernet Mac : 00:00:00:00:00:00 Ip Address : 10.1.20.7
(Cisco Controller) >show interface summary
Number of Interfaces.......................... 4
Interface Name Port Vlan Id IP Address Type Ap Mgr Guest
ap LAG 20 10.1.20.231 Dynamic No No
guest LAG 30 10.1.30.231 Dynamic No No
management LAG 10 10.1.1.231 Static Yes No
virtual N/A N/A 1.1.1.1 Static No No
SWITCH
witch#show run
Building configuration...
*** deleted for breverity *****
no aaa new-model
clock timezone AWST 8
system mtu routing 1500
ip routing
ip dhcp pool WAP_Pool
network 10.1.20.0 255.255.255.0
default-router 10.1.20.1
option 43 hex f104.0a01.01e7
ip dhcp pool Clients
network 10.1.30.0 255.255.255.0
default-router 10.1.30.1
dns-server 203.0.178.191
ip dhcp pool test
network 10.1.1.0 255.255.255.0
default-router 10.1.1.1
crypto pki trustpoint TP-self-signed-4082587776
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-4082587776
revocation-check none
rsakeypair TP-self-signed-4082587776
*** deleted for breverity *****
*** deleted for breverity ***** !
interface FastEthernet0/3
description *** WLC ****
switchport trunk encapsulation dot1q
switchport mode trunk
interface FastEthernet0/4
description **** AP *****
switchport access vlan 20
switchport mode access
spanning-tree portfast
interface FastEthernet0/5
description **** AP ****
switchport access vlan 20
switchport mode access
spanning-tree portfast
interface FastEthernet0/6
i*** deleted for breverity ***** !
interface Vlan10
description *** Managment ***
ip address 10.1.1.230 255.255.255.0
interface Vlan20
description *** WIRELESS APS ***
ip address 10.1.20.1 255.255.255.0
interface Vlan30
ip address 10.1.30.1 255.255.255.0
ip classless
ip route 0.0.0.0 0.0.0.0 10.1.1.1
ip http server
ip http secure-server
ip sla enable reaction-alerts
l*** deleted for breverity *****
ntp clock-period 36028827
ntp source FastEthernet0/1
ntp server 121.0.0.42
ntp server 202.127.210.37
end
I have also placed a Device in Vlan 20 and it is able to ping the WLC and the WLC can ping it s routing is working.
ThanksHey Scott,
I gave that a shot and still no luck, log's from AP boot up:
IIOS Bootloader - Starting system.
flash is writable
Tide XL MB - 40MB of flash
Xmodem file system is available.
flashfs[0]: 67 files, 9 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 41158656
flashfs[0]: Bytes used: 20894208
flashfs[0]: Bytes available: 20264448
flashfs[0]: flashfs fsck took 20 seconds.
Base Ethernet MAC address: f4:4e:05:b7:1e:84
Ethernet speed is 100 Mb - FULL Duplex
Loading "flash:/ap3g2-k9w8-mx.153-3.JA1/ap3g2-k9w8-mx.153-3.JA1"...#########################
File "flash:/ap3g2-k9w8-mx.153-3.JA1/ap3g2-k9w8-mx.153-3.JA1" uncompressed and installed, entry point: 0x2003000
executing...
Secondary Bootloader - Starting system.
Montserrat Board
40MB format
Tide XL MB - 40MB of flash
Xmodem file system is available.
flashfs[0]: 67 files, 9 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 41158656
flashfs[0]: Bytes used: 20894208
flashfs[0]: Bytes available: 20264448
flashfs[0]: flashfs fsck took 21 seconds.
flashfs[1]: 0 files, 1 directories
flashfs[1]: 0 orphaned files, 0 orphaned directories
flashfs[1]: Total bytes: 12257280
flashfs[1]: Bytes used: 1024
flashfs[1]: Bytes available: 12256256
flashfs[1]: flashfs fsck took 1 seconds.
Base Ethernet MAC address: f4:4e:05:b7:1e:84
Boot CMD: 'boot flash:/ap3g2-k9w8-mx.153-3.JA1/ap3g2-k9w8-xx.153-3.JA1;flash:/ap3g2-k9w8-mx.153-3.JA1/ap3g2-k9w8-xx.153-3.JA1'
Loading "flash:/ap3g2-k9w8-mx.153-3.JA1/ap3g2-k9w8-xx.153-3.JA1"...###############################################
File "flash:/ap3g2-k9w8-mx.153-3.JA1/ap3g2-k9w8-xx.153-3.JA1" uncompressed and installed, entry point: 0x1003000
executing...
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco IOS Software, C3700 Software (AP3G2-K9W8-M), Version 15.3(3)JA1, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2014 by Cisco Systems, Inc.
Compiled Fri 19-Dec-14 11:20 by prod_rel_team
Montserrat Board
40MB format
Tide XL MB - 40MB of flash
Initializing flashfs...
flashfs[2]: 67 files, 9 directories
flashfs[2]: 0 orphaned files, 0 orphaned directories
flashfs[2]: Total bytes: 40900608
flashfs[2]: Bytes used: 20894208
flashfs[2]: Bytes available: 20006400
flashfs[2]: flashfs fsck took 14 seconds.
flashfs[2]: Initialization complete.
flashfs[4]: 0 files, 1 directories
flashfs[4]: 0 orphaned files, 0 orphaned directories
flashfs[4]: Total bytes: 11999232
flashfs[4]: Bytes used: 1024
flashfs[4]: Bytes available: 11998208
flashfs[4]: flashfs fsck took 0 seconds.
flashfs[4]: Initialization complete.
Copying radio files from flash: to ram:
Copy in progress...CCCCC
Copy in progress...CCC
Copy in progress...CCCC
Copy in progress...CCCC
Copy in progress...CC
Copy in progress...CCCC
Copy in progress...CC
Copy in progress...CCCCC
Copy in progress...CCCC
Copy in progress...CC
Uncompressing radio files...
...done Initializing flashfs.
Radio0 present 8764 8000 0 A8000000 A8010000 0
Rate table has 650 entries (20 legacy/224 11n/406 11ac)
POWER TABLE FILENAME = ram:/Q2.bin
Radio1 present 8864 8000 0 80000000 80100000 4
POWER TABLE FILENAME = ram:/Q5.bin
Radio2 not present 0 0 0 0 0 8
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
cisco AIR-CAP3702I-Z-K9 (PowerPC) processor (revision A0) with 376810K/134656K bytes of memory.
Processor board ID FGL1838X4T1
PowerPC CPU at 800Mhz, revision number 0x2151
Last reset from power-on
LWAPP image version 8.0.110.0
1 Gigabit Ethernet interface
2 802.11 Radios
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: F4:4E:05:B7:1E:84
Part Number : 73-15243-01
PCA Assembly Number : 000-00000-00
PCA Revision Number :
PCB Serial Number : FOC18343WPR
Top Assembly Part Number : 068-05054-03
Top Assembly Serial Number : FGL1838X4T1
Top Revision Number : A0
Product/Model Number : AIR-CAP3702I-Z-K9
% Please define a domain-name first.
Press RETURN to get started!
*Mar 1 00:00:19.295: %SOAP_FIPS-2-SELF_TEST_IOS_SUCCESS: IOS crypto FIPS self test passed (15)
*Mar 1 00:00:19.755: Registering HW DTLS
*Mar 1 00:00:19.763: APAVC: Initial WLAN Buffers Given to System is 2500
*Mar 1 00:00:19.815: APAVC: WlanPAKs 42878 RadioPaks 42270
*Mar 1 00:00:22.127: %LINK-6-UPDOWN: Interface GigabitEthernet0, changed state to up
*Mar 1 00:00:26.055: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 0 (4)
*Mar 1 00:00:26.167: Loading Power Tables from ram:/Q2.bin. Class = A
*Mar 1 00:00:26.167: record size of 3ss: 1168 read_ptr: 4F9698E
*Mar 1 00:00:31.207: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 1 (4)
*Mar 1 00:00:31.251: Loading Power Tables from ram:/Q5.bin. Class = Z
*Mar 1 00:00:31.251: record size of vht: 2904 read_ptr: 4F9698E
*Mar 1 00:00:31.407: Wait until the stile protocol list is initialized.
*Mar 1 00:00:32.651: Start STILE Activation
*Mar 1 00:00:34.571: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0, changed state to down
*Mar 1 00:00:35.447: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C3700 Software (AP3G2-K9W8-M), Version 15.3(3)JA1, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2014 by Cisco Systems, Inc.
Compiled Fri 19-Dec-14 11:20 by prod_rel_team
*Mar 1 00:00:35.447: %SNMP-5-COLDSTART: SNMP agent on host Test_1 is undergoing a cold start
*Mar 1 00:00:36.563: %LINEPROTO-5-UPDOWN: Line protocol on Interface BVI1, changed state to up
*Mar 1 00:00:37.787: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to uplwapp_crypto_init: MIC Present and Parsed Successfully
*Mar 1 00:00:37.939: %SSH-5-ENABLED: SSH 2.0 has been enabled
*Mar 1 00:00:37.939: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to up
*Mar 1 00:00:38.987: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
*Mar 1 00:00:38.987: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to down
*Mar 1 00:00:47.567: %LINK-6-UPDOWN: Interface BVI1, changed state to down
*Mar 1 00:00:48.567: %LINEPROTO-5-UPDOWN: Line protocol on Interface BVI1, changed state to down
*Mar 1 00:00:50.431: %SOAP_FIPS-2-SELF_TEST_HW_SUCCESS: HW crypto FIPS self test passed (2-16)
*Mar 1 00:00:50.431: DPAA Initialization Complete
*Mar 1 00:00:50.431: %SYS-3-HARIKARI: Process DPAA INIT top-level routine exited
*Mar 1 00:00:51.431: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0, changed state to up
*Mar 1 00:00:53.435: %LINK-6-UPDOWN: Interface BVI1, changed state to up
*Mar 1 00:00:53.867: Currently running a Release Image
*Mar 1 00:00:54.287: Incorrect certificate in SHA2 PB !
*Mar 1 00:00:54.287: Using SHA-1 signed certificate for image signing validation.
*Mar 1 00:00:54.575: %LINEPROTO-5-UPDOWN: Line protocol on Interface BVI1, changed state to up
*Mar 1 00:00:59.787: %DHCP-6-ADDRESS_ASSIGN: Interface BVI1 assigned DHCP address 10.1.20.2, mask 255.255.255.0, hostname Test_1
*Mar 1 00:01:02.707: APAVC: Succeeded to activate all the STILE protocols.
*Mar 1 00:01:02.707: APAVC: Registering with CFT
*Mar 1 00:01:02.707: APAVC: CFT registration of delete callback succeeded
*Mar 1 00:01:02.707: APAVC: Reattaching Original Buffer pool for system use
*Mar 1 00:01:02.707: Pool-ReAtach: paks 42878 radio42270
%Default route without gateway, if not a point-to-point interface, may impact performance
*Mar 1 00:01:10.103: AP image integrity check PASSED
*Mar 1 00:01:10.187: Incorrect certificate in SHA2 PB !
*Mar 1 00:01:10.203: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
*Mar 1 00:01:10.203: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to reset
*Mar 1 00:01:11.591: %CDP_PD-4-POWER_OK: 15.4 W power - NEGOTIATED inline power source
*Mar 1 00:01:12.691: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up
*Mar 1 00:01:13.691: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
*Mar 1 00:01:13.947: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to up
*Mar 1 00:01:14.947: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to up
*Mar 1 00:01:20.211: %SYS-6-LOGGINGHOST_STARTSTOP: Logging to host 255.255.255.255 port 514 CLI Request Triggered
Translating "CISCO-CAPWAP-CONTROLLER"...domain server (255.255.255.255)
*Mar 1 00:01:31.215: %CAPWAP-5-DHCP_OPTION_43: Controller address 10.1.1.231 obtained through DHCP
*Mar 1 00:02:11.599: %CDP_PD-4-POWER_OK: Full power - NEGOTIATED inline power source
*Mar 1 00:02:11.603: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to down
*Mar 1 00:02:11.611: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
*Mar 1 00:02:12.603: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
*Mar 1 00:02:12.639: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up
*Mar 1 00:02:12.647: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to down
*Mar 1 00:02:12.655: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to reset
*Mar 1 00:02:13.639: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
*Mar 1 00:02:13.647: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to down
*Mar 1 00:02:13.699: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to up
*Mar 1 00:02:14.699: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to up
Not in Bound state.
*Mar 1 00:02:44.719: %CAPWAP-3-DHCP_RENEW: Could not discover WLC. Either IP address is not assigned or assigned IP is wrong. Renewing DHCP IP.
*Mar 1 00:02:49.839: %DHCP-6-ADDRESS_ASSIGN: Interface BVI1 assigned DHCP address 10.1.20.3, mask 255.255.255.0, hostname Test_1
Translating "CISCO-CAPWAP-CONTROLLER"...domain server (255.255.255.255)
*Mar 1 00:02:55.719: %CAPWAP-5-DHCP_OPTION_43: Controller address 10.1.1.231 obtained through DHCP
Not in Bound state.
*Mar 1 00:03:59.219: %CAPWAP-3-DHCP_RENEW: Could not discover WLC. Either IP address is not assigned or assigned IP is wrong. Renewing DHCP IP.
*Mar 1 00:04:04.343: %DHCP-6-ADDRESS_ASSIGN: Interface BVI1 assigned DHCP address 10.1.20.4, mask 255.255.255.0, hostname Test_1
Translating "CISCO-CAPWAP-CONTROLLER"...domain server (255.255.255.255)
*Mar 1 00:04:10.223: %CAPWAP-5-DHCP_OPTION_43: Controller address 10.1.1.231 obtained through DHCP -
Ignoring assoc request due to mobile in exclusion list
Hi,
I currently have an issue with a client who has 4 wireless scanners that will not register to the same SSID as 10 identical scanners at the same site
I have debugged the client and received the following output : -
*apfMsConnTask_0: Jun 18 11:59:56:720: 00:15:70:f2:bf:be Ignoring assoc request due to mobile exclusion list
The client can take the sanner(s) to another site and they will register without any issue ( to an AP controlled by a different WLC )
I have compared the setup and can see no differences
The WLCs are Cisco 4400 running v7.0.235.3
The SSID concerned is running WPA2 with Auth PSK
I have checked and can see no excldued clients on the 'problem' WLC
I also checked from CLi just in case there was a mismatch ( show clientexclusion ) and again, this showed no excldued clients
What exactly does the debug message mean and is there anywhere I can view the underlying cause of this issueAnd here's the same from the WLC without any issue :-
WLAN Identifier.................................. 11
Profile Name..................................... WIFI1 for WH
Network Name (SSID).............................. SCAN1
Status........................................... Enabled
MAC Filtering.................................... Disabled
Broadcast SSID................................... Disabled
AAA Policy Override.............................. Disabled
Network Admission Control
Radius-NAC State............................... Disabled
SNMP-NAC State................................. Disabled
Quarantine VLAN................................ 0
Maximum number of Associated Clients............. 0
Number of Active Clients......................... 161
Exclusionlist.................................... Disabled
Session Timeout.................................. 1800 seconds
CHD per WLAN..................................... Enabled
Webauth DHCP exclusion........................... Disabled
Interface........................................ scanners
Multicast Interface.............................. Not Configured
--More-- or (q)uit
WLAN ACL......................................... unconfigured
DHCP Server...................................... Default
DHCP Address Assignment Required................. Disabled
Static IP client tunneling....................... Disabled
Quality of Service............................... Silver (best effort)
Scan Defer Priority.............................. 5,6
Scan Defer Time.................................. 100 milliseconds
WMM.............................................. Allowed
WMM UAPSD Compliant Client Support............... Disabled
Media Stream Multicast-direct.................... Disabled
CCX - AironetIe Support.......................... Enabled
CCX - Gratuitous ProbeResponse (GPR)............. Disabled
CCX - Diagnostics Channel Capability............. Disabled
Dot11-Phone Mode (7920).......................... Disabled
Wired Protocol................................... None
IPv6 Support..................................... Disabled
Peer-to-Peer Blocking Action..................... Drop
Radio Policy..................................... All
DTIM period for 802.11a radio.................... 1
DTIM period for 802.11b radio.................... 1
Radius Servers
Authentication................................ 23.180.4.33 1812
Authentication................................ 23.180.11.104 1813
--More-- or (q)uit
Accounting.................................... Global Servers
Dynamic Interface............................. Disabled
Local EAP Authentication......................... Disabled
Security
802.11 Authentication:........................ Open System
Static WEP Keys............................... Disabled
802.1X........................................ Disabled
Wi-Fi Protected Access (WPA/WPA2)............. Enabled
WPA (SSN IE)............................... Disabled
WPA2 (RSN IE).............................. Enabled
TKIP Cipher............................. Disabled
AES Cipher.............................. Enabled
Auth Key Management
802.1x.................................. Disabled
PSK..................................... Enabled
CCKM.................................... Disabled
FT(802.11r)............................. Disabled
FT-PSK(802.11r)......................... Disabled
FT Reassociation Timeout......................... 20
FT Over-The-Air mode............................. Enabled
FT Over-The-Ds mode.............................. Enabled
CCKM tsf Tolerance............................... 1000
--More-- or (q)uit
CKIP ......................................... Disabled
IP Security................................... Disabled
IP Security Passthru.......................... Disabled
Web Based Authentication...................... Disabled
Web-Passthrough............................... Disabled
Conditional Web Redirect...................... Disabled
Splash-Page Web Redirect...................... Disabled
Auto Anchor................................... Disabled
H-REAP Local Switching........................ Disabled
H-REAP Local Authentication................... Disabled
H-REAP Learn IP Address....................... Enabled
Client MFP.................................... Optional
Tkip MIC Countermeasure Hold-down Timer....... 60
Call Snooping.................................... Disabled
Roamed Call Re-Anchor Policy..................... Disabled
SIP CAC Fail Send-486-Busy Policy................ Enabled
SIP CAC Fail Send Dis-Association Policy......... Disabled
Band Select...................................... Disabled
Load Balancing................................... Disabled
Mobility Anchor List
WLAN ID IP Address Status -
Error while sending request to Webservice from Client app on Weblogic
Hi Everybody,
As part of web service development and deployment, I created one simple webservice and tried to deploy it on Apache Tomcat 5.5 and then weblogic 9.2. It worked fine on Apache Tomcat but it didn't work on Weblogic. Here are the steps I followed.
1) Created a webservice within one Dynamic Web project
2) Created a Client application
3) Deployed both (by exporting war files from eclipse3.2) on Tomcat Apache locally on the same machine (localhost)
4) Invoked client in the browser which allows to send simple request (Hello!) to Webservice
5) Invoked webservice method call from the Client browser window
6) Received success response back from webservice.
Then, I deployed same war files on Weblogic 9.2 (different machine on the network)
- Both got deployed successfully and reached to ACTIVE state on Weblogic and became ready to accept requests.
- When invoked Client application on the browser, it worked.
- From that client application browser window, I tried to invoke webservice call, I got the exception as below:
exception: java.net.ConnectException: Connection refused: connect
I will greatly appreciate any advice on this. Let me know if more information is needed.
Thanks in advance.
Gaurang PrajapatiHave you given the correct ip or machine name in the client?
-
I have created a dynamic client to invoke a Web Service that uses non-built-in data types as parameter and return type in weblogic8.1 using ant task autotype and JAX-RPC. Now we are moving toward weblogic 9.0 but i could find equivalent way of creating dynamic client. So how can we create dynamic client in weblogic 9.0? I would also like to mention that our clients are standalone client. Thanks in advance for your help.
Thanks for your response.My requirement is, if we change interface means return object or parameters then we don't want to do redeployment of client jar. we want if there is any changes to the interface then it should be taken automatically.
-
I modified the EchoDom example (http://webservice.bea.com/dom.zip) client to be
dynamic (with WSDL) and deployed the service as a document type service. The ear
file is deployed correctly and I am able to execute the service from the URL without
any errors. However when I run the dynamic client, I see the following exception
trace. I see a similar error (serialization fails on class weblogic.apache.xerces.dom.DocumentImpl)
when I deploy the service as rpc. What am I doing incorrectly? Please help.
Sriram
run:
[java] javax.xml.rpc.JAXRPCException: failed to invoke operation 'echoDom
' due to an error in the soap layer (SAAJ); nested exception is: Message[ failed
to serialize interface javax.xml.soap.SOAPElementweblogic.xml.schema.binding.Se
rializationException: mapping lookup failure. class=interface javax.xml.soap.SOA
PElement class context=TypedClassContext{schemaType=['http://examples.org']:echo
Dom}]StackTrace[
[java]
[java] javax.xml.soap.SOAPException: failed to serialize interface javax.x
ml.soap.SOAPElementweblogic.xml.schema.binding.SerializationException: mapping
l
ookup failure. class=interface javax.xml.soap.SOAPElement class context=TypedCla
ssContext{schemaType=['http://examples.org']:echoDom}
[java] at weblogic.webservice.core.DefaultPart.invokeSerializer(Default
Part.java:328)
[java] at weblogic.webservice.core.DefaultPart.toXML(DefaultPart.java:2
97)
[java] at weblogic.webservice.core.DefaultMessage.toXML(DefaultMessage.
java:619)
[java] at weblogic.webservice.core.ClientDispatcher.send(ClientDispatch
er.java:206)
[java] at weblogic.webservice.core.ClientDispatcher.dispatch(ClientDisp
atcher.java:143)
[java] at weblogic.webservice.core.DefaultOperation.invoke(DefaultOpera
tion.java:444)
[java] at weblogic.webservice.core.DefaultOperation.invoke(DefaultOpera
tion.java:430)
[java] at weblogic.webservice.core.rpc.CallImpl.invoke(CallImpl.java:53
9)
[java] at weblogic.webservice.core.rpc.CallImpl.invoke(CallImpl.java:39
2)
[java] at examples.dom.Client.diiCall(Client.java:132)
[java] at examples.dom.Client.main(Client.java:164)
[java] Caused by: weblogic.xml.schema.binding.SerializationException: mappi
ng lookup failure. class=interface javax.xml.soap.SOAPElement class context=Type
dClassContext{schemaType=['http://examples.org']:echoDom}
[java] at weblogic.xml.schema.binding.RuntimeUtils.lookup_serializer(Ru
ntimeUtils.java:151)
[java] at weblogic.xml.schema.binding.RuntimeUtils.invoke_serializer(Ru
ntimeUtils.java:187)
[java] at weblogic.xml.schema.binding.RuntimeUtils.invoke_serializer(Ru
ntimeUtils.java:174)
[java] at weblogic.webservice.core.DefaultPart.invokeSerializer(Default
Part.java:324)
[java] ... 10 more
[java] ]
[java]
[java] at weblogic.webservice.core.rpc.CallImpl.invoke(CallImpl.java:55
9)
[java] at weblogic.webservice.core.rpc.CallImpl.invoke(CallImpl.java:39
2)
[java] at examples.dom.Client.diiCall(Client.java:132)
[java] at examples.dom.Client.main(Client.java:164)
[java] Exception in thread "main"
[java] Java Result: 1Hi Bruce,
I made the changes that you suggested. It didn't work. I still see the same deserialization
exception.
Sriram
Bruce Stephens <[email protected]> wrote:
Hi,
Try this format in your dynamic client:
call.setProperty("javax.xml.rpc.security.auth.username", "username");
call.setProperty("javax.xml.rpc.security.auth.password", "password");
HTHs,
Bruce
Sriram Chavali wrote:
If I had a weblogic security role enforcement in place for my WS EJB,how do I
pass the user credentials from a dynamic client? I set the USERNAME_PROPERTYand
PASSWORD_PROPERTY properties on the Call, but I see a deserializationerror on
the response and the SOAPElement interface.
A static client works fine when I pass the user credentials from thegetMyWSPort(String,
String) call.
Please help,
Sriram
"Sriram Chavali" <[email protected]> wrote:
Hi Bruce,
It worked perfectly.
Thanks for your help
Sriram
Bruce Stephens <[email protected]> wrote:
Hi Sriram,
OK, we are getting close. It looks like the problem is with the
helloComplexWorldResponse so looking at the client, I would change
the
invoke to look something like this:
String result = (String) call.invoke(new Object[] {doc});
If that still has problems, then try it without the return, i.e.make
it
a void return in the HelloWorldServiceEJB.java and go from there.
Regards,
Bruce
Sriram Chavali wrote:
Hi Brue,
Your example works fine for me. I am building an EJB implementationthat follows
your example where I see the error. The attached zip file has the
server
and client
(dynamic, which follows your example). The build file is build1.xml.
Thanks
Sriram
Bruce Stephens <[email protected]> wrote:
Hi Sriram,
hmmm...the sample I provided sends a Document with a dynamic client,
so
I'm confused as to where/why you are still seeing the same failure
as
the original post. Would you go back and look carefully at the
client
code (ClientHotelDyn.java) and note two important features:
1) adding the call.setProperty(Call.OPERATION_STYLE_PROPERTY,
"document");
2) adding the typemapping for the Document
If you are still experiencing problems, please post your codeand/or
open a dialog with our super support team: http://support.bea.com
or
[email protected]
Thanks,
Bruce
Hi Bruce,
The consumers for the service that I am building will be non-java
clients.
I wish
to demonstrate a reference implementation for them without using
the
generated
client side classes and hence the dynamic client.
Thanks for your example code. It worked fine. Just to add a
twist
to
your latest
example, I modified sample10 from Manoj's website (an EJB example)to accept an
org.w3c.dom.Document. I took your build file and tailored it
to
building
the sample10
and it worked fine for a static client, however when I modified
the
client to
be dynamic, I see the trace pasted at the end of this message.
Any
suggestions
run:
[java] javax.xml.rpc.JAXRPCException: failed to invoke
operation
'helloComp
lexWorld' due to an error in the soap layer (SAAJ); nested exceptionis: Message
[failed to deserialize xml:weblogic.xml.schema.binding.DeserializationException:
mapping lookup failure for xml type ['http://www.bea.com/servers/wls70/samples/
examples/webservices/basic/javaclass']:helloComplexWorldResponse
and
java interf
ace javax.xml.soap.SOAPElement]StackTrace[
[java]
[java] javax.xml.soap.SOAPException: failed to deserialize
xml:weblogic.xml
schema.binding.DeserializationException: mapping lookup failurefor
xml type
http://www.bea.com/servers/wls70/samples/examples/webservices/basic/javaclass']:
helloComplexWorldResponse and java interface javax.xml.soap.SOAPElement
[java] at weblogic.webservice.core.DefaultPart.toJava(DefaultPart.java:
389)
[java] at weblogic.webservice.core.DefaultMessage.toJava(DefaultMessage
java:458)
[java] at weblogic.webservice.core.ClientDispatcher.receive(ClientDispa
tcher.java:297)
[java] at weblogic.webservice.core.ClientDispatcher.dispatch(ClientDisp
atcher.java:144)
[java] at weblogic.webservice.core.DefaultOperation.invoke(DefaultOpera
tion.java:444)
[java] at weblogic.webservice.core.DefaultOperation.invoke(DefaultOpera
tion.java:430)
[java] at weblogic.webservice.core.rpc.CallImpl.invoke(CallImpl.java:53
9)
[java] at weblogic.webservice.core.rpc.CallImpl.invoke(CallImpl.java:39
2)
[java] at tutorial.sample10.client.Main.<init>(Main.java:105)
[java] at tutorial.sample10.client.Main.main(Main.java:40)
[java] Caused by: weblogic.xml.schema.binding.DeserializationException:map
ping lookup failure for xml type ['http://www.bea.com/servers/wls70/samples/exam
ples/webservices/basic/javaclass']:helloComplexWorldResponse
and
java
interface
javax.xml.soap.SOAPElement
[java] at weblogic.xml.schema.binding.RuntimeUtils.invoke_deserializer(
RuntimeUtils.java:325)
[java] at weblogic.webservice.core.DefaultPart.toJava(DefaultPart.java:
384)
[java] ... 9 more
[java] ]
[java]
[java] at weblogic.webservice.core.rpc.CallImpl.invoke(CallImpl.java:55
9)
[java] at weblogic.webservice.core.rpc.CallImpl.invoke(CallImpl.java:39
2)
[java] at tutorial.sample10.client.Main.<init>(Main.java:105)
[java] at tutorial.sample10.client.Main.main(Main.java:40)
BUILD SUCCESSFUL
Thanks
Sriram
Bruce Stephens <[email protected]> wrote:
Hi Sriram,
Give this example a spin and see if it fits your needs.
Just curious, why do you need to have a dynamic client?
Thanks,
Bruce
Sriram Chavali wrote:
I am using WLS 8.1 on Windows XP.
Sriram
"Sriram Chavali" <[email protected]> wrote:
I modified the EchoDom example (http://webservice.bea.com/dom.zip)
client
to be
dynamic (with WSDL) and deployed the service as a document
type
service.
The ear
file is deployed correctly and I am able to execute the
service
from
the URL without
any errors. However when I run the dynamic client, I see
the
following
exception
trace. I see a similar error (serialization fails on class
weblogic.apache.xerces.dom.DocumentImpl)
when I deploy the service as rpc. What am I doing incorrectly?Please
help.
Sriram
run:
[java] javax.xml.rpc.JAXRPCException: failed to invoke
operation
'echoDom
' due to an error in the soap layer (SAAJ); nested exceptionis:
Message[
failed
to serialize interface javax.xml.soap.SOAPElementweblogic.xml.schema.binding.Se
rializationException: mapping lookup failure. class=interface
javax.xml.soap.SOA
PElement class context=TypedClassContext{schemaType=['http://examples.org']:echo
Dom}]StackTrace[
[java]
[java] javax.xml.soap.SOAPException: failed to serializeinterface
javax.x
ml.soap.SOAPElementweblogic.xml.schema.binding.SerializationException:
mapping
l
ookup failure. class=interface javax.xml.soap.SOAPElement
class
context=TypedCla
ssContext{schemaType=['http://examples.org']:echoDom}
[java] at weblogic.webservice.core.DefaultPart.invokeSerializer(Default
Part.java:328)
[java] at weblogic.webservice.core.DefaultPart.toXML(DefaultPart.java:2
97)
[java] at weblogic.webservice.core.DefaultMessage.toXML(DefaultMessage.
java:619)
[java] at weblogic.webservice.core.ClientDispatcher.send(ClientDispatch
er.java:206)
[java] at weblogic.webservice.core.ClientDispatcher.dispatch(ClientDisp
atcher.java:143)
[java] at weblogic.webservice.core.DefaultOperation.invoke(DefaultOpera
tion.java:444)
[java] at weblogic.webservice.core.DefaultOperation.invoke(DefaultOpera
tion.java:430)
[java] at weblogic.webservice.core.rpc.CallImpl.invoke(CallImpl.java:53
9)
[java] at weblogic.webservice.core.rpc.CallImpl.invoke(CallImpl.java:39
2)
[java] at examples.dom.Client.diiCall(Client.java:132)
[java] at examples.dom.Client.main(Client.java:164)
[java] Caused by: weblogic.xml.schema.binding.SerializationException:
mappi
ng lookup failure. class=interface javax.xml.soap.SOAPElement
class
context=Type
dClassContext{schemaType=['http://examples.org']:echoDom}
[java] at weblogic.xml.schema.binding.RuntimeUtils.lookup_serializer(Ru
ntimeUtils.java:151)
[java] at weblogic.xml.schema.binding.RuntimeUtils.invoke_serializer(Ru
ntimeUtils.java:187)
[java] at weblogic.xml.schema.binding.RuntimeUtils.invoke_serializer(Ru
ntimeUtils.java:174)
[java] at weblogic.webservice.core.DefaultPart.invokeSerializer(Default
Part.java:324)
[java] ... 10 more
[java] ]
[java]
[java] at weblogic.webservice.core.rpc.CallImpl.invoke(CallImpl.java:55
9)
[java] at weblogic.webservice.core.rpc.CallImpl.invoke(CallImpl.java:39
2)
[java] at examples.dom.Client.diiCall(Client.java:132)
[java] at examples.dom.Client.main(Client.java:164)
[java] Exception in thread "main"
[java] Java Result: 1
Name: sample10.zip
sample10.zip Type: Zip Compressed Data (application/x-zip-compressed)
Encoding: base64 -
Workshop : webservices : Dynamic Client
I am using WebLogic Workshop 8.1 to crate a test Web Service.
I have created a webservice with two methods to support
1. SOAP RPC call
2. SOAP document call
This is working fine with the test harness provided by workshop.
I have written two Dynamic clients to test this web service (one for soap RPC
type call and another for soap "document" type call).
The SOAP RPC type call dynamic client is working fine.
The SOAP "document" type call dynamic client is throwing the following exception
javax.xml.rpc.JAXRPCException: failed to invoke operation 'ReservationRQ' due
to an error in the soap layer (SAAJ); nested exception is: Message[ failed to
serialize interface javax.xml.soap.SOAPElementweblogic.xml.schema.binding.SerializationException:
mapping lookup failure. class=interface javax.xml.soap.SOAPElement class context=TypedClassContext{schemaType=['http://www.openuri.org/']:ReservationRQ}]StackTrace[
javax.xml.soap.SOAPException: failed to serialize interface javax.xml.soap.SOAPElementweblogic.xml.schema.binding.SerializationException:
mapping lookup failure. class=interface javax.xml.soap.SOAPElement class context=TypedClassContext{schemaType=['http://www.openuri.org/']:ReservationRQ}
at weblogic.webservice.core.DefaultPart.invokeSerializer(DefaultPart.java:328)
at weblogic.webservice.core.DefaultPart.toXML(DefaultPart.java:297)
at weblogic.webservice.core.DefaultMessage.toXML(DefaultMessage.java:619)
at weblogic.webservice.core.ClientDispatcher.send(ClientDispatcher.java:206)
at weblogic.webservice.core.ClientDispatcher.dispatch(ClientDispatcher.java:143)
at weblogic.webservice.core.DefaultOperation.invoke(DefaultOperation.java:444)
at weblogic.webservice.core.DefaultOperation.invoke(DefaultOperation.java:430)
at weblogic.webservice.core.rpc.CallImpl.invoke(CallImpl.java:539)
at weblogic.webservice.core.rpc.CallImpl.invoke(CallImpl.java:392)
at TestWSClientDoc.main(TestWSClientDoc.java:74)
Caused by: weblogic.xml.schema.binding.SerializationException: mapping lookup
failure. class=interface javax.xml.soap.SOAPElement class context=TypedClassContext{schemaType=['http://www.openuri.org/']:ReservationRQ}
at weblogic.xml.schema.binding.RuntimeUtils.lookup_serializer(RuntimeUtils.java:151)
at weblogic.xml.schema.binding.RuntimeUtils.invoke_serializer(RuntimeUtils.java:187)
at weblogic.xml.schema.binding.RuntimeUtils.invoke_serializer(RuntimeUtils.java:174)
at weblogic.webservice.core.DefaultPart.invokeSerializer(DefaultPart.java:324)
... 9 more
at weblogic.webservice.core.rpc.CallImpl.invoke(CallImpl.java:559)
at weblogic.webservice.core.rpc.CallImpl.invoke(CallImpl.java:392)
at TestWSClientDoc.main(TestWSClientDoc.java:74)
Failed to send doc.
I have attached a zip file conatining the following files with this.
TestWebService.jws - web service code
TestWSClientDoc.java - dynamic client to test "document" type call
TestWSClientRpc.java - dynamic client to test "rpc" type call
test.xml – test document.
Could you please let me know here am I doing wrong?
Thanks
Purna
[webservice.zip]Hi Mike,
Your code worked for me. I will go from here.
Thanks,
Purna
"Michael Wooten" <[email protected]> wrote:
>
>
>
Hi Purna,
I have attached the source for a DII client that I think may work for
you.
It contains comments that describe what I think is causing the problem
you are
having in WLW 8.1, because I was having the same problem in WLW 7.0 :-)
You'll need to have %WL_HOME%\server\lib\webservices.jar in the client's
CLASSPATH,
because that's where the ElementCodec (and DocumentCodec) is. Let me
know if it
works.
Regards,
Mike Wooten
"Purna" <[email protected]> wrote:
Hi Bruce,
The example you provided is working fine. In fact I had used your example
to write
the Dynamic client.
Background on my requirement:
I had created a web service out of my application, which has set ofenterprise
java beans. The web service is working fine with WLW test harness and
static client.
I want to write a Dynamic Cient for this web service. Inside this web
service
the methods are expecting a document object. I am getting the exceptions
for
the Dynamic Client.
Please find the attached zip file containg the wsdl files.
It would be great if you can provide a working document style web service
(*.jws
file - generated from WL workshop) and Dynamic Client code.
Thanks,
Purna
Bruce Stephens <[email protected]> wrote:
Hi,
I would suggest trying to narrow down the problem. I suspect that there
are server side issues. Try going back to this example and making
sure
it works OK.
http://newsgroups.bea.com/cgi-bin/dnewsweb/domdocdyn.zip?cmd=article&group=weblogic.developer.interest.webservices&item=4127&part=2&utag=&/domdocdyn.zip
Spin up WLW and compare the two WSDLs. I suspect there will be some
differences that could be causing your problem.
Could you tell us a bit about your goal?
Thanks,
Bruce
Purna wrote:
Hi Bruce,
I have removed the "rpc" style method and now I have only "document"style method,
but still I am getting the same exception with Dynamic Client.
Do you have any suggetions?.
Thanks,
Purna
Bruce Stephens <[email protected]> wrote:
Hello,
Take a look at "style" attribute:
http://edocs.bea.com/wls/docs81/webserv/wsp.html#1015120 in the
web-service element, it states the "style" attribute applies to
an
entire Web Service, all operations specified in a single <web-service>
element must be either RPC-oriented or documented-oriented; WebLogic
Server does not support mixing the two styles within the same Web
Service.
Hope this helps,
Bruce
purna wrote:
I am using WebLogic Workshop 8.1 to crate a test Web Service.
I have created a webservice with two methods to support
1. SOAP RPC call
2. SOAP document call
This is working fine with the test harness provided by workshop.
I have written two Dynamic clients to test this web service (one
for
soap RPC
type call and another for soap "document" type call).
The SOAP RPC type call dynamic client is working fine.
The SOAP "document" type call dynamic client is throwing the followingexception
javax.xml.rpc.JAXRPCException: failed to invoke operation 'ReservationRQ'due
to an error in the soap layer (SAAJ); nested exception is: Message[failed to
serialize interface javax.xml.soap.SOAPElementweblogic.xml.schema.binding.SerializationException:
mapping lookup failure. class=interface javax.xml.soap.SOAPElement
class context=TypedClassContext{schemaType=['http://www.openuri.org/']:ReservationRQ}]StackTrace[
javax.xml.soap.SOAPException: failed to serialize interface javax.xml.soap.SOAPElementweblogic.xml.schema.binding.SerializationException:
mapping lookup failure. class=interface javax.xml.soap.SOAPElement
class context=TypedClassContext{schemaType=['http://www.openuri.org/']:ReservationRQ}
at weblogic.webservice.core.DefaultPart.invokeSerializer(DefaultPart.java:328)
at weblogic.webservice.core.DefaultPart.toXML(DefaultPart.java:297)
at weblogic.webservice.core.DefaultMessage.toXML(DefaultMessage.java:619)
at weblogic.webservice.core.ClientDispatcher.send(ClientDispatcher.java:206)
at weblogic.webservice.core.ClientDispatcher.dispatch(ClientDispatcher.java:143)
at weblogic.webservice.core.DefaultOperation.invoke(DefaultOperation.java:444)
at weblogic.webservice.core.DefaultOperation.invoke(DefaultOperation.java:430)
at weblogic.webservice.core.rpc.CallImpl.invoke(CallImpl.java:539)
at weblogic.webservice.core.rpc.CallImpl.invoke(CallImpl.java:392)
at TestWSClientDoc.main(TestWSClientDoc.java:74)
Caused by: weblogic.xml.schema.binding.SerializationException:
mapping
lookup
failure. class=interface javax.xml.soap.SOAPElement class context=TypedClassContext{schemaType=['http://www.openuri.org/']:ReservationRQ}
at weblogic.xml.schema.binding.RuntimeUtils.lookup_serializer(RuntimeUtils.java:151)
at weblogic.xml.schema.binding.RuntimeUtils.invoke_serializer(RuntimeUtils.java:187)
at weblogic.xml.schema.binding.RuntimeUtils.invoke_serializer(RuntimeUtils.java:174)
at weblogic.webservice.core.DefaultPart.invokeSerializer(DefaultPart.java:324)
... 9 more
at weblogic.webservice.core.rpc.CallImpl.invoke(CallImpl.java:559)
at weblogic.webservice.core.rpc.CallImpl.invoke(CallImpl.java:392)
at TestWSClientDoc.main(TestWSClientDoc.java:74)
Failed to send doc.
I have attached a zip file conatining the following files with
this.
TestWebService.jws - web service code
TestWSClientDoc.java - dynamic client to test "document" type
call
TestWSClientRpc.java - dynamic client to test "rpc" type call
test.xml – test document.
Could you please let me know here am I doing wrong?
Thanks
Purna
Name: webservice.zip
webservice.zip Type: Zip Compressed Data (application/x-zip-compressed)
Encoding: base64 -
Discovery request received on wrong VLAN
I am setting up a new 4404 with my existing WLAN. I have a combo for 1100 and 1200 APs, on two different VLANs, with WDS on each VLAN and a WLSE. One of the VLANs is on the same subnet was the WLC management port. The other WLAN VLAN is not. I am able to join the VLAN on the same subnet to my WLC but when I convert one of my auto APs on the other VLAN, it converts but never joins my WLC. If I run a debug on the WLC I get the following.
Fri Aug 1 12:38:56 2008: 00:17:0f:37:68:60 Received LWAPP DISCOVERY REQUEST from AP 00:17:0f:37:68:60 to ff:ff:ff:ff:ff:ff on port '1'
Fri Aug 1 12:38:56 2008: Discovery Request received on wrong VLAN '160' on interface '1', management VLAN = '0' - in L3 mode, dropping the packet.
My WLC is on code 5.0.148. All of my APs have static IP addresses. I have setup DNS but NOT DHCP since all of them have static IP and that option 42 still confuses me. Any thoughts? My 4506 is set to trunk the port the WLC is on. I even tried to only apply the two VLANs to that port. My WLC can ping the IP of the AP on the different VLAN and my AP can ping the WLC.You need to configure the native vlan on the trunk port to vlan 160. Looks like the packet is being tagged as vlan 60 and your management interface is set to '0' which is untagged.
-
Dynamic Client Exception - Need help
Hi,
Need help.......
I am getting following exception, when I run
my dynamic client.
Attached below is my code as well as WSDL.
Thanks in advance..
Regards
-Shakeel
[java] javax.xml.rpc.JAXRPCException: failed to invoke operation 'Print' du
e to an error in the soap layer (SAAJ); nested exception is: Message[ failed to
serialize interface javax.xml.soap.SOAPElementweblogic.xml.schema.binding.Serial
izationException: mapping lookup failure. class=interface javax.xml.soap.SOAPEle
ment class context=TypedClassContext{schemaType=['http://learn.technologies.com/
WS']:PrintRequest}]StackTrace[
[java] javax.xml.soap.SOAPException: failed to serialize interface javax.x
ml.soap.SOAPElementweblogic.xml.schema.binding.SerializationException: mapping l
ookup failure. class=interface javax.xml.soap.SOAPElement class context=TypedCla
ssContext{schemaType=['http://learn.technologies.com/WS']:PrintRequest}
[java] at weblogic.webservice.core.DefaultPart.invokeSerializer(Default
Part.java:328)
CODE
// Setup the global SAAJ message factory
System.setProperty("javax.xml.soap.MessageFactory", "weblogic.webservice.core.soap.MessageFactoryImpl");
// Setup the global JAX-RPC service factory
System.setProperty( "javax.xml.rpc.ServiceFactory", "weblogic.webservice.core.rpc.ServiceFactoryImpl");
ServiceFactory serviceFactory = ServiceFactory.newInstance();
// define qnames
String targetNamespace = "http://learn.technologies.com/WS";
QName serviceName = new QName(targetNamespace, "PersonalDataService");
QName portName = new QName(targetNamespace, "PersonalDataInterface");
QName operationName = new QName(targetNamespace, "Print");
URL wsdlLocation = new URL("http://localhost:7001/simpleexample/PersonalDataInterface?WSDL");
// create service
Service service = serviceFactory.createService(wsdlLocation, serviceName);
// create call
Call call = service.createCall(portName, operationName);
WSDL
<definitions xmlns="http://schemas.xmlsoap.org/wsdl/"
xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"
xmlns:tns="http://learn.technologies.com/WS"
targetNamespace="http://learn.technologies.com/WS">
<types>
<schema targetNamespace="http://learn.technologies.com/WS"
xmlns="http://www.w3.org/2001/XMLSchema" elementFormDefault="qualified">
<element name="PrintRequest">
<complexType>
<sequence>
<element name="firstName" type="string"/>
<element name="age" type="int"/>
<element name="salary" type="double"/>
</sequence>
</complexType>
</element>
<element name="PrintResponse">
<complexType>
<sequence/>
</complexType>
</element>
<element name="QueryRequest">
<complexType>
<sequence>
<element name="id" type="double"/>
</sequence>
</complexType>
</element>
<element name="QueryResponse">
<complexType>
<sequence>
<element name="return" type="tns:ArrayOfPersonalData"/>
</sequence>
</complexType>
</element>
<complexType name="PersonalData">
<sequence>
<element name="name" type="string"/>
<element name="age" type="int"/>
<element name="salary" type="double"/>
</sequence>
</complexType>
<complexType name="ArrayOfPersonalData">
<sequence>
<element maxOccurs="unbounded" minOccurs="0" name="Item" type="tns:PersonalData"/>
</sequence>
</complexType>
</schema>
</types>
<message name="PrintRequestMessage">
<part name="PrintRequest" element="tns:PrintRequest"/>
</message>
<message name="PrintResponseMessage">
<part name="PrintResponse" element="tns:PrintResponse"/>
</message>
<message name="QueryRequestMessage">
<part name="QueryRequest" element="tns:QueryRequest"/>
</message>
<message name="QueryResponseMessage">
<part name="QueryResponse" element="tns:QueryResponse"/>
</message>
<portType name="PersonalDataInterface">
<operation name="Print">
<input name="PrintRequestMessage" message="tns:PrintRequestMessage"/>
<output name="PrintResponseMessage" message="tns:PrintResponseMessage"/>
</operation>
<operation name="Query">
<input name="QueryRequestMessage" message="tns:QueryRequestMessage"/>
<output name="QueryResponseMessage" message="tns:QueryResponseMessage"/>
</operation>
</portType>
<binding name="PersonalDataIntfBinding" type="tns:PersonalDataInterface">
<soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
<operation name="Print">
<soap:operation/>
<input> <soap:body use="literal"/> </input>
<output> <soap:body use="literal"/> </output>
</operation>
<operation name="Query">
<soap:operation/>
<input> <soap:body use="literal"/> </input>
<output> <soap:body use="literal"/> </output>
</operation>
</binding>
<service name="PersonalDataService">
<port name="PersonalDataInterface" binding="tns:PersonalDataIntfBinding">
<soap:address location="http://localhost:7001/simpleexample/PersonalDataInterface"/>
</port>
</service>
</definitions>Exception is coming on following line (forgot
to paste in first post)
Object result = call.invoke(new Object[] { "Shakeel", new Integer (30), new Double(2000) }); -
Discarding Primary discovery request in LWAPP
Hi,
after upgrading our WISM module from version 6 to version 7, we are constantly getting these error messages with syslog:
Jun 20 12:37:02 wism2.xxxx.sk WiSM2: *spamReceiveTask: Jun 20 11:37:02.632: %LWAPP-6-CAPWAP_SUPP_VER: spam_lrad.c:1821 Discarding Primary discovery request in LWAPP from AP 00:25:b4:da:99:c0 supporting CAPWAP
There is one interesting thing about this log message - there is no AP with the MAC addess "00:25:b4:da:99:c0" in our infrastructure, but the VLAN SVI interfaces on the Cisco 6500, where the WISM module in installed, are using this "00:25:b4:da:99:c0" MAC address.
Any idea what might be wrong?As far as I'm concerned, your problem was that you had an AP that was not on its primary WLC at the time of the messages. I don't think discovery mechanisms have anything to do with it.
Prior to like 5.X, you defined Primary WLC only by Name. As such, the AP sent to every IP address it knew of for discovery.... since then, you define Primary WLC by Name, plus an Ip address, but this does not restrict primary discovery to that IP (maybe it should?)
Is there any scenario where you would have had an AP on the wrong controller last week? WLC down? LAN failure? Over subscribed WLC?
Perhaps we could get some low priority bugs to enhance the message now.... maybe there already is one.... Either way, the message is what it is. Even if you saw a message that says it dropped the lwapp, you shouldnt care what AP that is, it just means there is one sending primary discoveries...
If you like the message now because you want to know what APs are sending primary discoveries, that should be handled by a proper message in syslog like "AP XXXX is sending primary discovery requests, it is not on its Primary WLC"..... but then you'd flood your syslog if you have purposely took down a WLC..... I actually think this message you are seeing in syslog should be removed as well,, since you'll likely see a ton of them if you also lose a primary wlc.... -
View Object Client Interface issue
Hi,
I am trying to generate View Object Client Interface for a view object and i am unable to do it. Can anyone let me know how to generate this class and add client interface methods.
I tried Doing this Viewobject -> java -> Java classes. This did not generate The Object Client Interface
I am following http://andrejusb.blogspot.com/2010/04/dynamic-row-selection-for-adf-table.html for my implementation.
Jdev version 11.1.1.4
Thanks
AjaySteps to follow :
Double click on VO, select Java , Client Interface edit button. This will allow u to shuttle your methods right.
This will be disabled if you dont have a VOImpl or you dont have any custom/client methods in you VOImpl. -
Getting error while invoking client interface method as a web service
Hi,
I have written one custom method inAppModuleImpl and include that custom method into the AppModule's Client Interface(AppModule-->Java-->ClientInterface).
It autogenerates two java classes: ClientInterfaceImpl class and interface class. I right clicked on ClientInterfaceImpl class and select the option create webservice proxy. Then I deployed my application into the WL Server. There I am able to see the webservice. But when I test the webservice and invoke the method. It is throwing the below exception:
HTTP/1.1 500 Internal Server Error
Content-Type: text/xml;charset=UTF-8
X-Powered-By: Servlet/2.5 JSP/2.1
Date: Thu, 28 Jul 2011 12:07:42 GMT
X-ORACLE-DMS-ECID: 6d2bf3b5503a93f7:-56043a49:1316ef0e0c2:-8000-000000000000028d
Content-Length: 6624
X-HTTPAnalyzer-RuleName: Pass through :
<?xml version = '1.0' encoding = 'UTF-8'?>
<S:Envelope xmlns:S="http://schemas.xmlsoap.org/soap/envelope/">
<S:Body>
<S:Fault xmlns:ns4="http://www.w3.org/2003/05/soap-envelope">
<faultcode>S:Server</faultcode>
<faultstring>java.lang.NullPointerException</faultstring>
<detail>
<ns2:exception xmlns:ns2="http://jax-ws.dev.java.net/" note="To disable this feature, set com.sun.xml.ws.fault.SOAPFaultBuilder.disableCaptureStackTrace system property to false" class="java.lang.NullPointerException">
<ns2:stackTrace>
<ns2:frame line="7598" file="ApplicationModuleImpl.java" method="isMarshalledLocally" class="oracle.jbo.client.remote.ApplicationModuleImpl"/>
<ns2:frame line="7572" file="ApplicationModuleImpl.java" method="riInvokeExportedMethod" class="oracle.jbo.client.remote.ApplicationModuleImpl"/>
<ns2:frame line="27" file="TestClientInterfaceAMClient.java" method="testmethod" class="model.client.TestClientInterfaceAMClient"/>
<ns2:frame line="native" file="NativeMethodAccessorImpl.java" method="invoke0" class="sun.reflect.NativeMethodAccessorImpl"/>
<ns2:frame line="39" file="NativeMethodAccessorImpl.java" method="invoke" class="sun.reflect.NativeMethodAccessorImpl"/>
<ns2:frame line="25" file="DelegatingMethodAccessorImpl.java" method="invoke" class="sun.reflect.DelegatingMethodAccessorImpl"/>
<ns2:frame line="597" file="Method.java" method="invoke" class="java.lang.reflect.Method"/>
<ns2:frame line="92" file="WLSInstanceResolver.java" method="invoke" class="weblogic.wsee.jaxws.WLSInstanceResolver$WLSInvoker"/>
<ns2:frame line="74" file="WLSInstanceResolver.java" method="invoke" class="weblogic.wsee.jaxws.WLSInstanceResolver$WLSInvoker"/>
<ns2:frame line="151" file="InvokerTube.java" method="invoke" class="com.sun.xml.ws.server.InvokerTube$2"/>
<ns2:frame line="268" file="EndpointMethodHandlerImpl.java" method="invoke" class="com.sun.xml.ws.server.sei.EndpointMethodHandlerImpl"/>
<ns2:frame line="100" file="SEIInvokerTube.java" method="processRequest" class="com.sun.xml.ws.server.sei.SEIInvokerTube"/>
<ns2:frame line="866" file="Fiber.java" method="__doRun" class="com.sun.xml.ws.api.pipe.Fiber"/>
<ns2:frame line="815" file="Fiber.java" method="_doRun" class="com.sun.xml.ws.api.pipe.Fiber"/>
<ns2:frame line="778" file="Fiber.java" method="doRun" class="com.sun.xml.ws.api.pipe.Fiber"/>
<ns2:frame line="680" file="Fiber.java" method="runSync" class="com.sun.xml.ws.api.pipe.Fiber"/>
<ns2:frame line="401" file="WSEndpointImpl.java" method="process" class="com.sun.xml.ws.server.WSEndpointImpl$2"/>
<ns2:frame line="531" file="HttpAdapter.java" method="handle" class="com.sun.xml.ws.transport.http.HttpAdapter$HttpToolkit"/>
<ns2:frame line="253" file="HttpAdapter.java" method="handle" class="com.sun.xml.ws.transport.http.HttpAdapter"/>
<ns2:frame line="140" file="ServletAdapter.java" method="handle" class="com.sun.xml.ws.transport.http.servlet.ServletAdapter"/>
<ns2:frame line="206" file="WLSServletAdapter.java" method="handle" class="weblogic.wsee.jaxws.WLSServletAdapter"/>
<ns2:frame line="310" file="HttpServletAdapter.java" method="run" class="weblogic.wsee.jaxws.HttpServletAdapter$AuthorizedInvoke"/>
<ns2:frame line="223" file="HttpServletAdapter.java" method="post" class="weblogic.wsee.jaxws.HttpServletAdapter"/>
<ns2:frame line="124" file="JAXWSServlet.java" method="doPost" class="weblogic.wsee.jaxws.JAXWSServlet"/>
<ns2:frame line="727" file="HttpServlet.java" method="service" class="javax.servlet.http.HttpServlet"/>
<ns2:frame line="79" file="JAXWSServlet.java" method="service" class="weblogic.wsee.jaxws.JAXWSServlet"/>
<ns2:frame line="820" file="HttpServlet.java" method="service" class="javax.servlet.http.HttpServlet"/>
<ns2:frame line="227" file="StubSecurityHelper.java" method="run" class="weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction"/>
<ns2:frame line="125" file="StubSecurityHelper.java" method="invokeServlet" class="weblogic.servlet.internal.StubSecurityHelper"/>
<ns2:frame line="300" file="ServletStubImpl.java" method="execute" class="weblogic.servlet.internal.ServletStubImpl"/>
<ns2:frame line="26" file="TailFilter.java" method="doFilter" class="weblogic.servlet.internal.TailFilter"/>
<ns2:frame line="56" file="FilterChainImpl.java" method="doFilter" class="weblogic.servlet.internal.FilterChainImpl"/>
<ns2:frame line="101" file="JpsAbsFilter.java" method="run" class="oracle.security.jps.ee.http.JpsAbsFilter$1"/>
<ns2:frame line="native" file="AccessController.java" method="doPrivileged" class="java.security.AccessController"/>
<ns2:frame line="313" file="JpsSubject.java" method="doAsPrivileged" class="oracle.security.jps.util.JpsSubject"/>
<ns2:frame line="413" file="JpsPlatformUtil.java" method="runJaasMode" class="oracle.security.jps.ee.util.JpsPlatformUtil"/>
<ns2:frame line="84" file="JpsAbsFilter.java" method="runJaasMode" class="oracle.security.jps.ee.http.JpsAbsFilter"/>
<ns2:frame line="147" file="JpsAbsFilter.java" method="doFilter" class="oracle.security.jps.ee.http.JpsAbsFilter"/>
<ns2:frame line="71" file="JpsFilter.java" method="doFilter" class="oracle.security.jps.ee.http.JpsFilter"/>
<ns2:frame line="56" file="FilterChainImpl.java" method="doFilter" class="weblogic.servlet.internal.FilterChainImpl"/>
<ns2:frame line="136" file="DMSServletFilter.java" method="doFilter" class="oracle.dms.servlet.DMSServletFilter"/>
<ns2:frame line="56" file="FilterChainImpl.java" method="doFilter" class="weblogic.servlet.internal.FilterChainImpl"/>
<ns2:frame line="3715" file="WebAppServletContext.java" method="wrapRun" class="weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction"/>
<ns2:frame line="3681" file="WebAppServletContext.java" method="run" class="weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction"/>
<ns2:frame line="321" file="AuthenticatedSubject.java" method="doAs" class="weblogic.security.acl.internal.AuthenticatedSubject"/>
<ns2:frame line="120" file="SecurityManager.java" method="runAs" class="weblogic.security.service.SecurityManager"/>
<ns2:frame line="2277" file="WebAppServletContext.java" method="securedExecute" class="weblogic.servlet.internal.WebAppServletContext"/>
<ns2:frame line="2183" file="WebAppServletContext.java" method="execute" class="weblogic.servlet.internal.WebAppServletContext"/>
<ns2:frame line="1450" file="ServletRequestImpl.java" method="run" class="weblogic.servlet.internal.ServletRequestImpl"/>
<ns2:frame line="207" file="ExecuteThread.java" method="execute" class="weblogic.work.ExecuteThread"/>
<ns2:frame line="176" file="ExecuteThread.java" method="run" class="weblogic.work.ExecuteThread"/>
</ns2:stackTrace>
</ns2:exception>
</detail>
</S:Fault>
</S:Body>
</S:Envelope>
How to solve this??
Thanks,
Vicky.
Edited by: Vicky on Jul 28, 2011 5:10 AMI'm using version 14.1.2002. I can create a webi report, but If I use a filter in this webi, a message WIS 30270 appears.
-
Invoking a web service from dynamic client in weblogic 7
Is it possible to invoke a webservice from dynamic client in weblogic 7. Because i tried and it doesn't work. But it works with WL 8.1
I don't see any samples on the net for weblogic 7.Hello rss,
If you want to invoke a web service from a JCD you will have to build the SOAP message using JAX-RPC or AXIS and then programmatically creat an HTTP connection.
Or you can leverage the HTTP(S) eWay and then you only have to build the SOAP message.
Or use eInsight. You can import a WSDL into eInsight and eInsight will offer you a business process Activity to invoke the web service operations defined in the WSDL.
Maybe you are looking for
-
Separating one iTunes account into 3 different accounts
I have both of my kids iPods (and my iPhone) all sharing one iTunes account. Is there a way to move them to their own iTunes account without losing all the apps and music they have on their devices?
-
The Brightness Gradient Issue DOES EXIST With The 24" iMacs.
Four years ago I bought a hefty G4 eMac and a few months later the G5 iMac was introduced. I was impressed and vowed I would get one the following year, but as each new version was introduced I put it off, waiting for an even better model. I spend mo
-
Ford USB doesn't recognize iPhone anymore
While driving today using my iphone's iPod via USB on my 2009 Ford Escape the music stopped and I eventually restarted the phone. The car never recognized the iPod again. I went the the Apple store and eventually they replaced the phone. Even before
-
how to install mac on pc please help i love mac but can't buy it
-
Migrating Custom Reports 2.5 reports to 6i
Is there a standard procedure documented for migration of custom Reports 2.5 reports built for Oracle Apps 10.7 to Reports 6i for Oracle Apps 11i ?