Ignoring my Power Options and Volume when I restart
When I restart my MBP it loses my volume setting (comes up half way no matter what I had it set to when I shut down). It also loses my Power settings, specifically dimming the screen, I have it set not to dim before sleep but it still does unless I toggle it on and then off again.
Please help
I have the same problem. Every time I restart, my screen dims after a few minutes of non use despite having unchecked the box in system preferences. If I check and then uncheck the problem goes away. Same problem with the volume as you but no soluion yet.
I have tried resetting PRAM and SMC to no avail in fact when I do this my sleep and screen saver settings revert to default as well (I believe this should happen with a PRAM & SMC reset though)
Any help would be good
Similar Messages
-
when i got my 4S the iphone power button and volume control were loose i noticed after a week and now sorta worried about whats goning to happen to the buttons.
Use the Transfer Purchases command in the File menu of iTunes.
(60931) -
my ipod 4G power button and volume button not working after updated to ios6.
i also experience wifi issue. my ipod can't detect any wifi signal.
so deppresing!
what should i do?
i can't put my ipod to sleep, can't adjust volume, can't shut off.
should i update to ios 6.1?
HELPTry:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
When iOS 6.1 comes out I would update. -
Have iPod Nano Shuffle 6th Gen. I purchased it when I had Windows Vista. I have since upgraded to Windows 7 Ultimate . Was fine with Vista. Now, it keeps shutting off during the song, 3 or 4 times. Have to press power button and then arrow to restart song. I went to my iTunes and ran diagnostics. Passed all until the end. The last test had a red dot failure. It said no iPod, iPhone, or iPad found. Does someone know how I can correct the problem? iTunes is always updating, so I am current.
Sidney...
Try here > iPod shuffle troubleshooting and service FAQ -
Update weight and volume when changing the quantity
Hello ALL,
For some configurable items, those whose weight and volume depends on configuration, when changing the quantity at set level, weights and volumes are not calculated again and order item is saved with wrong data about weights and volume.
when ever changing the quantity we will get a message - " Changing date/quantity may result in different BOM Please configure"
if we do explicitly by clicking "Item Details Configuration' then Weight and Volume will get update automatically.
my requirement is Weight and volume should get update automatically when changing the quantity with clicking on "Item Details Configuration'.
could you provide any OSS notes available for this or any help to achieve this functionality.Dear Prathap Naidu P,
Did you solve this issue?
Because I have the same problem, and I was looking for hints.
Thank you so much for any help.
Best regards,
J.Flanders -
Ipod nano 6 gen power button and volume up and down not working, Ipod nano 6 gen power button and volume up and down not working
Try restarting your device. If that doesn't work, take it to an Apple store. If it is less than a year old and just stopped working, they will replace it for free (be sure to back it up to iTunes first). If you dropped it, you will have to pay because Apple will not replace a device due to "Human Error." If it is more than a year old, you will either have to pay to get it fixed, or have to pay to get it replaced.
-
My power button and volume keys dont work!!!!!
HELP!!!!!
My power button and volume keys don't work so I can't restart my iPod touch 4g and whenever I try to reboot it a voice control thing comes upMake an appointment at the genius bar or call Apple to arrange for repair/replace.
-
i have done all 7 steps recommended by the troubleshooting articles and only when i restart my router does my library show on apple tv2 but only for about 5 minutes, this was never a problem before the updates of itunes and apple tv2, i have spent insane amounts of money on the apple store buying movies and tv shows that i cannot watch anymore, and no there is no firewall on my laptop nor my router, so no port configuration is needed
i have read many articles for this problem but there is no solution, some say restart the router, others say uncheck the option to sync iphone over wi-fi, others suggest not hitting the "done" button after setting up homeshare on itunes, NONE of them work. My itunes library disappears from ym apple tv 2 after 5 minutes or soDid not work. I've selected iMessage to ON and left it. After a few hours I recieved a message "activation unsuccessful. Turn on iMessage to try again". This has been going on for the past 3 days.
-
yesterday for the first time i turned on my macpro 2011 model and i got a crazy gray screen with lines all over it ,so i held down the power button and turn off then restarted and all was ok could someone help me with this,what caused this shut down. werd
Are the lines like psychedelic herringbone? If yes, I had that happen once, it was something serious, like the
Logic board. The good news is that it was fixed without any loss of data on the hard drive. Take it in to have Apple look at it ASAP. I took it to TekServe at the time, they are very nice about preserving your data and user library when possible.
Good luck and don't panic. -
I have a PowerBook G4 with a non-functioning monitor. It used to work with an external monitor, but I reinstalled the OS, which cleared the display preferences and now when I restart it won't detect the external monitor. This means I can't use the computer anymore. How do I fix? I tried using the Command+F2 keyboard shortcut, but it doesnt' work. It's possible that since I reinstalled the OS, it still needs to be set up, so there's only a welcome screen (but since I can't see it I'm not sure).
There is no limit to the number of times you can re-install Office on the same computer.
You can activate by telephone:
The last paragraph is the relevant bit -
I have tried to open firefox multipul times only to receive the error message:
We're Sorry
Firefox had a problem and crashed. We'll try to restore your tabs and windows when it restarts.
To help us diagnose and fix the problem, you can send us a crash report.
When I send the report and try to restart firefox and see that I have several tabs open, but it quickly shuts down again before I can do anything other then glance at it.http://kb.mozillazine.org/Firefox_crashes
-
do not know what's going on but the Firefox crashing, and is still crashing, and crashing back again ..
This problem is not resolved for a long time 'and I wonder why not fix this problem so far?
These details.
We're Sorry
Firefox had a problem and crashed. We'll try to restore your tabs and windows when it restarts.
To help us diagnose and fix the problem, you can send us a crash report.I was having the same problem.... But I keep forgetting that when you upgrade firefox... or it updates automatically... you need to right click on the firefox start up icon, go into properties, click on the compatibilities tab, and put a check in the "Run This Program As An Administrator" box, then hit apply. Start Firefox, and it should work OK. Problem is...each time you upgrade firefox and/or I think Adobe flash... you need to make sure that box is checked. This is on Firefox 15.0.1 with Adobe Flash 11.4.402.278 all up to date, Windows 7 64bit. If Firefox has Adobe flash add-on, it needs to run in admin mode or it will crash.
-
Iphone 6 mutes sounds and volume when traveling
When i am driving, the phone volume mutes itself. There is no message tone, even if a video is played through social media, it mutes itself despite the volume button showing max volume
Is it connected to the bluetooth in your car? That appears the likely explanation or are you plugging it in to the USB of car?
Check Settings - General - Accessibility - scroll down to Interactions - Call Audio Routing
Try and change the option and see what happens -
Satellite A500-1GL - Windows 7 power options and gaming
Hi all
Some may know from my previous posts about my issue with the fan on my Satellite A500-1GL causing me concern when I am online gaming. Hitting 90% is worrying. And its still happening with the BIOS update and Toshiba now advising to do a factory restore then if that fails send in for repair.
Looking at the power options,
I was wondering if anyone could recommend what power options I should consider and would this make any difference for the fan gaming wise (secondlife seems to be the main problem with the fan cranking up)
Any help would be appreciated, trying to think of anything that could help that may be an easy solution to this fan issue
torti :)Hello
To be honest a lot of fan activity during gaming would be normal I think because games need a lot of CPU and GPU power, they always run on a very high level. That means a lot of heat will be produced and this must be cooled to avoid hardware damages.
Furthermore if I play games, its not important how much noise the fan creates because I hear the game music or dialogs Isnt it so? ;)
Anyway, from time to time its recommendable to clean the cooling system of your notebook using compressed air spray:
[How to clean the cooling system of a Toshiba notebook? |http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=40]
And for gaming you can use High Performance or Balanced power option of Windows. -
HT4085 My power button and volume won't work any advice
My Ipad2 got trouble when power button won't work and volume increase didn't work either, any advice to repair it
Try closing all Apps
1. Double tap the home button to bring up the multi-tasking view
2. Swipe up on the screenshot of the app you want to exit.
3. The app will fly off the screen
Maybe you are looking for
-
EBS posting to clear customer open items - Function not working?
Hello SAPers I have an issue I just canu2019t seem to resolve! We are receiving MT940 statements and receive customer invoice reference details with field: 86 as follows: :61:090910C1500,00FOSB1000270 //100909050 0 035315 :86:DEPOSIT Remi
-
"Application can't be found" error for files and folders
This has become mind boggling for me. Starting last week, files I've created (namely in either Adobe Photoshop CS5 or Illustrator CS5) have started giving me "Application can't be found" errors when trying to open them. They show up when I use spotli
-
Need help for Conversion Function in Oracle
Hi, Can Any One help me Please. I need a Oracle conversion script for converting from decimal to hex. and decimal to datetime. Thanks In Advance.
-
Vhttp://www.commondreams.org/view/2010/08/07-2 should be something like What Collapsing Empire Looks Like I want to File> save page as or File >save Frame as I get something like, " 07-2.htm" how do I get the better name for the saved file?
-
Conflicting Operating systems - How to Uninstall
I am having major problems. Here's my question: Currently when I go to STARTUP DISK, I have the following choices: Mac 10.4.3 on Mac HD (my boot drive) Mac 10.2.5 on Mac HD1 Mac 10.3.9 on Mac HD2 Mac 9.2.2 on Mac HD2 Mac 9.2.2 on Mac HD I would like