IGo Stowaway Ultra-Slim Bluetooth Keyboard Driver for Curve 8330

I just got the IGO Stowaway Ultra-Slim, my Curve 8330 can see it under discovery, and asks for code, I type in 123 enter and 123 on the keyboard and no response,, I have been been following all sorts of links but no luck, The IGO Site (thinkoutside) is terrible and advises they have discontinued support for their keyboards.. 
HAS anyone been sucessful getting the two devices to link up?
If I don't get it to work, I am putting it back on EBAY,,,  
Thanks in advance
D

Hi...
In the quick setup here are the bullets....
Configuring the keyboard:
1. From the BlackBerry main screen, launch the Stowaway Keyboard application.
2. Select Yes at the "Enable Bluetooth?" prompt.
3. On some BlackBerry devices, when launching the Keyboard application, you may see an
"Insufficient Permissions" status. In this case, it is necessary to change the BlackBerry's
application permissions for the Stowaway keyboard application. The following permissions
must be set to "Allow": Bluetooth, Interprocess Communications, Device Settings,
Keystroke Injection, and Security Timer Reset. If any of these options are set to "Deny",,
the keyboard application will provide an "Application Permissions" button that will take you
directly to the Permissions screen. The options will have already been set correctly for you, you
need only Save them with the BlackBerry "Save" menu option. (Note: If a "Device Options"
button displays instead when you launch the Stowaway Keyboard application, you will be given
manual instructions for setting and saving these permissions.)
4. Once the Application Permissions have been saved, place the keyboard in Discoverable
mode by simultaneously pressing the <Ctrl> <Left Fn> <Right Fn> keys on the Stowaway
Ultra-Slim Keyboard. This is indicated by the Keyboard Status Light (above the <T> key),
flashing green once per second.
5. Within the Stowaway application, select "Connect to Keyboard" from the menu.
6. If prompted, enter the numeric-only passkey of (1-9 digits of your choosing) on the
BlackBerry device using the dialpad, and press the Trackball or Track Wheel button or the
<Enter> button.
7. Type the same passkey on the keyboard using <LFn+numbers> using the number row, and
press <Enter> on the Stowaway Ultra-Slim keyboard. If the passkey process succeeds, the
keyboard should be connected within a few seconds.
8. You may receive a prompt to "Allow connection to a local port?". Select "Yes", and the
driver will be available for connecting to your Blackberry.
Message Edited by hmeister on 10-12-2008 09:04 PM
+++++++++++++++++++++++++++++++++++++++++++++++++
If successful in helping you, please give me kudos in my post.
Please mark the post that solved it for you!
Thank you!
Best Regards
hmeister

Similar Messages

  • Apple keyboard driver for Windows XP without running Bootcamp constantly

    I just reinstalled Bootcamp/WindowsXP and wanted to know if there was a way I can get a driver for JUST the keyboard working.  I don't use any of the MBP F key functions like backlighting and volume so don't like having the bootcamp processes always running, especially because I hate the backlight on keyboards that you can't fully turn off without a slightly annoying thing each startup.  I use an external keyboard which has all the extra F key functions, but again never use them. I just need a way that I can keep functionality of the F keys without running Bootcamp proccesses in the background and the <Use F1,F2, F3, keys as normal function"
    TL;DR
    Apple keyboard driver for WindowsXP so I can properly use F# keys w/out

    From what I know, the BootCamp Driver installer program install all the Windows required drivers and it does not offer any customization options of which drivers the user wants to install on their Windows partition.
    Now you can recover normal F-key functionality by doing the following:
    Go to the Bootcamp Control Panel in the desktop task bar.
    Click Allow if the Windows asks permission.
    The Bootcamp Control Panel will open.
    Look in the tabs at the top of the Windows and click the "Keyboard" header.
    There you should see an option that says "Use F/Keys..." or something similar. There you will be able to use the keys normally as in a Windows PC.
    Hope this helps!

  • Keyboard Shortcuts for curves in cs4 work intermittently:

    The keyboard short for curve adj. layers to select existing anchor points is plus and minus (which would be shift =, and shift -).  Sometimes this works, and other times it results in a "blending change" for the layer.  Anyone know how to fix this?
    Similarly, sometimes the up, down, left and right arrows do not move the points.  Sometimes they do.  What's up?

    Ah ha!  Thank you.  It does it (blending change) with the pen tool group, the path and direct selection tools, and the line and shape tools selected.  But not the eyedropper family.  How strange.  Inadequate beta testing?  One less annoyance in my work flow.  Thanks.  CB

  • Bluetooth Keyboard driver disables Palm Tx Alarm function

    Dear Folks,
    I have had a Palm TX for quite a while, and I use it frequently for e-mail and access on the road.  During a recent trip, my Universal I/R keyboard died, and I picked up a new Palm Bluetooth keyboard 3245WW.  I've noticed that when the keyboard driver is enabled, my Alarm function no longer works!  The Palm turns on at the appointed time, but unless one manually selects the "!" icon, the alarm never sounds.  This doesn't happen when the driver is disabled.  It took quite a while to figure this out...
    It's interesting that when the bluetooth keyboard is apparently working fine and I'm inside of Versamail trying to answer a message, the first keystroke sometimes crashes the program and causes a soft reboot of the Palm.
    Note:  I have left the IR driver on the Palm, but it is turned off.  I also have Documents to Go version 8.003 on the Palm.
    Any ideas?  I have the most recent Bluetooth Driver (11.08).
    Thanks,
    Curt B.
    Post relates to: Palm TX

    Hi brenec,
    just curious, did you fix your problem? Did it resolve the problem with crashing the device?
    I have the Bluetooth keyboard since about 2 weeks and in principle it is working great. However, I experienced that the Palm crashes and does a soft reboot more often than usual. In particular this happens when I am typing some text on the keyboard. As far as I can tell, this happens when writing text using Documents to Go 7.00?, but it might also happen in other applications; the problem is that I use the keyboard almost exclusively with Documents to Go.  Luckily this does not happen all the time, but on the other hand, I already lost text that I typed on the Palm.
    One pecularity is (and that reminds me to the Alarm problem) that I noticed that the Palm switches on by itself. No alarms are showed or something similar, just the screen lights up. The Palm did this even before using the Bluetooth keyboard.
    I use the keyboard quite often as some kind of daily journal and to think loud (brainstorming). I find the smallness of the device very nice and that the Palm is ready to work after switching on. I used the Universal Wireless Keyboard before and didn't had these crashes. I removed the old infrared keyboard driver, but I did not do a "spring clean".
    Any idea? If I can't fix the problem, I need to go for an alternative platform after 10 years of having had a Palm device :-(
    Hubert
    Post relates to: Palm TX

  • Found a bluetooth keyboard case for the A2109 tablet

    I found a nice bluetooth keyboard case that fits the A2109 tablet. It is really for the Kindle Fire HD 8.9 tablet, but the A2109 fits fine.  It is available at Amazon. Look for the
    MiniSuit Removable Qwerty Keyboard Case + Stand + Wake/Sleep for Kindle Fire HD 8.9" (PU Leather) for $29.95.
    The case is "folio-style", made from fake leather, and has a removeable bluetooth keyboard that syncs up easily with the tablet. Hitting any key on the keyboard will wake up the tablet. It has arrow keys and 12 function keys that make the outfit very laptop like. Also, has additional functions for volume, video control, and quick return to home, back, and lock.
    You will need to use an exacto knife to cut holes for the power switch, volume control, and headphone jack. The usb port is exposed, and I do not care about using the hdmi port while its in the case. The front camera is exposed, but there is no cutout for the back camera.
    So far, I really like it.  I hope thispost helps others who are looking for a decent case solution.

    Apple makes few accessories and Apple has not said why in your case. Also, the terms of use of this forum prohibits discussion of:
    Discussions of Apple policies or procedures or speculation on Apple decisions.

  • Bluetooth drivers driver for lion 10.7 OSX

    I deleted my blue tooth drivers on accident and my key board and bluetooth device want work How do I reinstall the driver for lion 10.7 OSX?

    Reinstalling Lion Without the Installer
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion: Select Reinstall Lion and click on the Continue button.
    Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry.

  • Iphone bluetooth device driver for windows 7 os

    My laptop says it cannot connect via bluetooth because it doesn't have the the device driver for my windows 7 os - can someone point me to it as I am having difficulty finding it - thanks

    what are you trying to do?
    the only thing windows can use an iphone for bluetoothwise is
    teething it's internet connection (it being the iphone)

  • Still no bluetooth keyboard support for N9?

    Anyone had any luck?
    I can sync a bluetooth keyboard to my E7 and it works perfect.  But my N9 will sync to the keyboard, but then will not be able to use it for anything? 
    Anyone know a work around or if the next udate (if there is one) will suppor this?

    kev187 wrote:
    Oh there have been issues?
    What's the bad news about the dev mode with 1.1?
    Whether restricted to first available models or particular firmware version it is not yet clear but more information here:/t5/Maemo-and-MeeGo-Devices/Major-update-available​-for-the-N9/m-p/1206097/message-uid/1206097/highli​...
    Here is screenshot using application with Apple Bluetooth Keyboard:
    Happy to have helped forum with a Support Ratio = 42.5

  • T61P Ultra Slim bay hard drive issues

    Hi,
    I have a new T61P with an additional hard drive in the Ultra Slim bay. 
    I can safely pull out the old drive or DVD, plug is the another drive - nothing happens!!  I thought this hard drive is suppose to be Plug-N-Play.
    Is there any settings / configurations I need to do?  What is the best setting to format that drive?
    Thanks,
    Dave

    Use "safely remove devices" or Easy Eject before removing an ultrabay device.
    Give windows a few seconds to complete the dismount before inserting the new device
    A new hdd will need to be formatted - use Disk Management (right click My Computer - select Manage)
    If a HDD was already in a machine and had a HDD password set it will not be detected if you swap it in hot.  You have to cold boot and enter the password when prompted.  If you remove the HDD password using BIOS setup then it will function when hot-swapped.
    I was previously employed by Lenovo but have no formal role on this forum.
    I am here on my own time because I like fooling with PCs, especially Lenovo ones. ALL my posts are purely my personal opinion.

  • Ultra thin usb keyboard mapping for eject in win7

    Anyone know the mapping for the Mac Ultra thin USB keyboard to use "eject" cd/dvd using win 7?

    Hi,
    have a look here http://support.apple.com/kb/HT1216
    Regards
    Stefan

  • Universal IR Keyboard driver for palm 755p

    I have to do a hard reset to enable me to pass my phone on to my son. I need to reinstall the driver for the folding universal IR keyboard to use with the palm 755p. Can't find the original disk. Any ideas where I could find the file? I have scoured everywhere.

    Have you looked at Palm.com?  There are several keyboards available.
    Check the support pages for accessories for the model you have:
    http://kb.palm.com/wps/portal/kb/na/deviceselector/page_en.html#NA%20Accessories
    WyreNut
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

  • Bluetooth Keyboard shortcut for Curly Quotes?

    Hi,
    I am looking to see of there is a keyboard shortcut for getting curley quotes on the iOS version of Pages. I know if I hold down the " key on the software keyboard I can choose the quote I want.
    How can I do this with a BT keyboard?

    Hi,
    I am looking to see of there is a keyboard shortcut for getting curley quotes on the iOS version of Pages. I know if I hold down the " key on the software keyboard I can choose the quote I want.
    How can I do this with a BT keyboard?

  • Can Western Digital My Passport Ultra be a bootable drive for my MBPro?

    I have not found a definitive answer and wanted to see if anyone has used this drive (external, 1TB) as a bootable drive for Mac (I'm running 10.06.8) -- want a boot drive before attempting upgrade of my OS)
    WD site does not list it as confirmed to work as mac boot drive, but it also does not list it as a "does not work" drive. It's just not mentioned.

    Thanks -- I know it's possible generally, but I was hoping someone with this specific drive would be able to confirm,
    i called WD and the guy said yes -- but at first he did not know that there was software to create a bootable drive, so I'm dubious of his competence.

  • Drivers for Curve 8330 install everytime its connected to Windows xp Machine

    I am having an issues lately with every time my Curve 8330 is connected to the computer it installs the device drivers.  anyone know why this is happening??  How can I stop it?

    Hello cellrev and welcome to the BlackBerry® Support Community Forums.
    Do you have the BlackBerry® Desktop Software installed on your computer? 
    If you connect another USB device to your computer, does the same repetitive driver installation?
    Do you have an anti-virus program installed? If so, what program? 
    Thanks!
    -HMthePirate
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • TS3253 Need Bluetooth peripheral driver for IPAD 2 on PC with Windows 7

    I have Windows 7 on my PC.  One of the devices I have conntected to the PC is my IPAD 2.  I keep ketting a trouble shooting message that my bluetooth peripheral device has no driver.  Can anyone tell me where I can download this driver?

    Huh??  What exactly are ou trying to connect to your iPad via Bluetooth?  If you are trying to connect your iPad to your PC, you can't.  Bluetooth on iPad is specifically designed to pair Bluetooth Headphones, Keyboards and Speakers.  Nothing more.  And try as you might, there is no way you can download a driver of any kind to any iOS (iPad, iPhone, iPod) device.

Maybe you are looking for