IGS and MAPS

Hi gurus,
In a WAD template with a gis MAP I get this message:
Problem occurred with Internet Graphics Server communication EXTERNAL_ERROR
I get this error only sometimes, often template works well. in Tx RSRT and SIGS seems to be ok.
when i get the error i've to shut down the server, and then it works.
how can I look for a solution?
tks
Michele

Hi,
WAD screen
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/6dd54713-0c01-0010-8691-a3576b9a95d9

Similar Messages

What is the diffrence between map and map.entry in core java

what is the diffrence between map and map.entry in core java . where it will be use ful. any one give one example plz.

A Map contains Map.Entry's
e.g.
        Map map = new LinkedHashMap(8);
        map.put(new Integer(1), "one");
        map.put(new Integer(2), "two");
        final Iterator iterator = map.entrySet().iterator();
        while (iterator.hasNext()) {
            Map.Entry entry = (Map.Entry) iterator.next();
            System.out.println("key=" + entry.getKey() + ", value=" + entry.getValue());
        }

Sending Idocs from SAP-R/3 to XI, bundle and map them to one XML-file

Hi All,
We need to send IDoc's (DEBMAS06) from R/3 to XI and bundle and map them to a single xml-file. Please help us with your suggestions on how to proceed using a simple solution (probably need of BPM).
Regards,
Theo

Hi Theo,
there is an example in SAP Library: <a href="http://help.sap.com/saphelp_nw04/helpdata/en/08/16163ff8519a06e10000000a114084/frameset.htm">Collecting and Bundling Messages - One Interface</a>. Plz post us your detailed quetions.
Regards,
Udo

How to configure one dsl connection and one public ip in cisco router and map to one interface for using exchange server

how to configure one dsl connection and one public ip in cisco router and map to one interface for using exchange server

Hi ,
Have you got any additional public IP Address from your service provider , If yes on router you can have static route for those additional IP Address pointing to your ASA outside interface .
Accordingly you can configure NAT
HTH
Sandy .

Data from a file need to be read and mapped into a custom table of R/3

Hello all,
This is related to inbound to SAP ECC via SAP PI.
There is a requirement concerning PI part that data from a file need to be read and mapped into a custom table of R/3.
To have this scenario developed , do we have any other option than the Proxy ?
My understanding is as follows : File --> SAP PI --> Proxy
You suggestions are welcome.
Regards,
Rachana

Hi Ravi,
As suggested by Inaki, you can use proxy communication in recever.
but you can also use the below
FILE -----> PI -------> PROXY
RFC
IDOC
to communicate to ECC system.
Regards
srinivas

Data Type, Message Type and Mapping for FTP

Thanks in advance for your replies.
As our first production XI scenario, we need to move several (at least 46) files from our SAP instance to a couple of different servers to support our legacy systems. Once all locations are on SAP this requirement should go away.
I only want to pick up the file from the one server and place it on the other and this leads me to some questions.
How do I define the Data Type and Message Type for each of the files? Do I need to consider the size of the record in each interface and create DT/MT with different sizes.
Do I need a mapping program that simply maps one structure to the other?

I recently completed a similar exercise.
It looks like this...
server1 ftp (Sender - delete file) - XI - Server2 ftp (receiver - create file). This will move the file from one server to another.
I used the same schema and mapped fields on a one to one basis.
The Size of the files I process are between 6kb and 500kb each, but the mapping/fields remain constant, just the numebr of items change.
Worked seemelessly for the last three weeks (since go-live)

PI 7.1 : Taking a input PDF file and mapping it to a hexBinary attribute

Hello All,
We have a requirement which involves taking in an input PDF file and mapping it to a message type with binary attribute and sending it to an R3 system.
Can anyone please detail the steps or point us to the correct documents for setting up the scenario.
The scenario is file to Proxy adapter. The part which we need assitance is pulling up the input pdf and mapping it to binary field.
Thanks.
Kiran

Thanks Praveen,Mayank,Sarvesh and Andreas for your valuable help with the issue.
I was able to successfully pick up the binary PDF file from a file server , encode it using Base 64 and post it to R3.
I used the following code snippet and added the mentioned jar files to create a new jar file which was used as java mapping in the operation mapping.
import com.sap.aii.mapping.api.StreamTransformation;
import com.sap.aii.mapping.api.*;
import com.sap.aii.utilxi.base64.api.*;
import java.io.*;
import java.util.*;
public class Base64EncodingXIStandard implements StreamTransformation{
     String fileNameFromFileAdapterASMA;
     private Map param;
     public void setParameter (Map map)
          param = map;
          if (param == null)
               param = new HashMap();
     public static void main(String args[])
          Base64EncodingXIStandard con = new Base64EncodingXIStandard();
          try
               InputStream is = new FileInputStream(args[0]);
               OutputStream os = new FileOutputStream(args[1]);
               con.execute(is, os);
          catch (Exception e)
               e.printStackTrace();
public void execute(InputStream inputstream, OutputStream outputstream)
               DynamicConfiguration conf = (DynamicConfiguration) param.get("DynamicConfiguration");
               DynamicConfigurationKey KEY_FILENAME = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
               fileNameFromFileAdapterASMA = conf.get(KEY_FILENAME);
               if (fileNameFromFileAdapterASMA == null)
                    fileNameFromFileAdapterASMA = "ToBase64.txt";
          try
               while ((len = inputstream.read(buffer)) > 0)
                    baos.write(buffer, 0, len);
               str = Base64.encode(baos.toByteArray());     //buffer);
               outputstream.write("<?xml version=\"1.0\" encoding=\"utf-8\"?><ROOT>".getBytes());
               outputstream.write(("<FILENAME>" + fileNameFromFileAdapterASMA + "</FILENAME>").getBytes());
               outputstream.write( ("<BASE64DATA>" + str + "</BASE64DATA></ROOT>" ).getBytes());
          catch(Exception e)
               e.printStackTrace();
     byte[] buffer = new byte[1024*5000];
     ByteArrayOutputStream baos = new ByteArrayOutputStream();
     int len;
     String str = null;
I had to do the following configuration settings
1) Create a Sender Comm Channel with Adapter Specific message attributes and Filename checkbox checked.
2) Use the Java Mapping in the Operation mapping.
The scenario is working smoothly with out any issues.
Thanks.
Kiran

Hi!!I want to scale an analogic signal, and I don´t understand very well how interpolated option works in "Scaling and Mapping".

Can anyone explain to me, the option Interpolated, in the function , "Scaling and Mapping?
Thank you!!!!!

When you select Interpolation you then define a table of value pairs; basically the raw data versus actual data.
For example
2 5
4 10
6 20
What the VI then does is if the input signal has a value of 3 the Express VI will linearly interpolate between 5 and 10 and will map your value of 3 to 7.5. Again a value of 5 would then be interpolated and mapped to 15.
Take a look at the attached VI.
Evan
National Instruents
Attachments:
mapandscale.vi ‏89 KB

Problem in Creating .wsdl file and mapping.xml with ant

hi
i am created my .wsdl file and mapping.xml file with wscompile tool but when i run this by ant tool it show a problem.
the command runs on command prompt but when run throught ant file it shows a following error :-
Execute failed: java.io.IOException: CreateProces: wscompile -define -mapping build\classes\META-INF\mapping.xml -d . -nd build\.................and so on
so if anybody have any idea then plz help me asap
thanx

The following Ant snippet is the way I've defined my wscompile task. I'm creating a web application and it looks like yours might be an EJB endpoint, but you can adjust where necessary:
<taskdef name="wscompile" classname="com.sun.xml.rpc.tools.ant.Wscompile">
     <classpath refid="compile.classpath" />
</taskdef>
<target name="init">
     <echo message="-------- ${appname} --------" />
</target>

     <target name="generate-server-from-WSDL" depends="init">
          <wscompile fork="yes"
                       keep="true"
                       base="${basedir}/WebContent/WEB-INF/classes"
                       import="true"
                       features="wsi"
                       xPrintStackTrace="true"
                       verbose="true"
                       mapping="${basedir}/WebContent/WEB-INF/jaxrpc-mapping.xml"
                       sourcebase="${basedir}/src"
                       config="${config.server.doclit.file}">
               <classpath>
                    <path refid="compile.classpath" />
               </classpath>
          </wscompile>
     </target>
     <target name="compile-server-from-WSDL" depends="generate-server-from-WSDL">
          <javac srcdir="${basedir}/src" destdir="${basedir}/WebContent/WEB-INF/classes" debug="${compile.debug}">
               <classpath refid="compile.classpath" />
          </javac>
     </target>Just make sure that the named destination directories exist before you run the script.
If you'd like more details on the wscompile Ant task, I found the following pages invaluable:
https://jax-rpc.dev.java.net/whitepaper/1.1/index-part1.html

Coding for ABAP Proxy and mapping

Hi XI Ds
which one need coding neither ABAP Proxy nor ABAP Mapping
Thanks

Hi Kushee ,
We need coding for both ABAP Proxy and mapping. We need to know some OO(Object Oreinted) ABAP concepts.
We can also import JAVA CODE for certain functionality.
Check the following websites for clarity:
how to create a flat file out of an IDoc-XML by means of an ABAP mapping program and the J2EE File Adapter.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/46759682-0401-0010-1791-bd1972bc0b8a
cheers!
gyanaraj

Generate Flexfield and Mapping Information Process errors out

Hi,
The Generate Flexfield and Mapping Information process errors out with the following msg:
**Starts**19-OCT-2009 13:55:02
ORACLE error 6501 in FDPSTP
Cause: FDPSTP failed due to ORA-06501: PL/SQL: program error
ORA-06512: at "APPS.FND_FLEX_DSC_API", line 1626
ORA-06501: PL/SQL: program error
ORA-06512: at "APPS.FND_FLEX_DSC_API", line 925
ORA-01403: no data foun
I have created the element set with all the elements added one at a time into the element set.
Any idea on what could be the issue ?

Pl see if the steps in MOS Doc 453184.1 (ORA-01403 and ORA-06512 at HXC_CREATE_FLEX_MAPPINGS and FND_FLEX_DSC_API on Runnning hxcmprn.sql) can help
HTH
Srini

Help me please : Serious problems with collection-mapping, list-mapping and map-mappi

Hi everybody;
I have serious problems with list-mapping, collection-mapping and map-mapping.
Acording to specifications and requirements in a system I am working on it is needed to
get a "list" of values or an indivudual value.I am working with ORACLE 9i Database,
ORACLE 9i AS and ORACLE 9i JDEVELOPER.
I tried to map a master-detail relationship in an entity-bean, using list-mapping.
And this was very useful in order to get a "list" of details, ...but, when I wanted
to get a single value I have some problems with persistence, something about "saving a state"
despite I just want to get the value of a single detail.
I decided to change it to map-mapping and the problem related with a single detail
worked successfully, but I can get access to the whole bunch of details.
May anyone of you help me with that?
I am very confused I do not know what to do.
Have any of you a solution for that problem?
Thank you very much.

Have you tried a restore in iTunes?

Shortcuts do not work anymore in Safari and Maps since I updated to Yosemite

Since I upgraded to Yosemite, both Safari 8.0 and Maps 2.0 do not respond to any shortcuts, like "cmd q" to quit or "cmd c" to copy. I have to do everything manually which is quite frustrating, as it slows my workflow down. I can only use the shortcuts if I click on the bar at the top of the window (Safari File Edit View etc.).
I bought my Mac 6 months ago and so don't think i'ts because of the hardware .__. I only have the problem with Safari and Maps.
Can someone help me please?
Thanks already
Alex

Hey _A_L_E_X_,
I see that you are having issues with some keyboard shortcuts in Yosemite. I have a couple of suggestions for you that should be able to help you troubleshoot this issue. First, this article may resolve your issue:
OS X Yosemite: If a keyboard shortcut doesn’t work
http://support.apple.com/kb/PH18424
If not, continue by using this article to make sure all keys you are using for these shortcuts are responding properly:
One or more keys on the keyboard do not respond - Apple Support
http://support.apple.com/en-us/TS1381
Finally, you may need to perform a Safe Boot:
OS X: What is Safe Boot, Safe Mode? - Apple Support
http://support.apple.com/en-us/HT201262
Thanks for coming to the Apple Support Communities!
Regards,
Braden

Where in the database should my themes and styles and maps etc... go?

We had a problem performing an export of the MDSYS schema for backup purposes. When we tried to import our data, after a database corruption thanks to a patch, the themes and styles, and maps that we created did not get put back in user_sdo_themes, maps, styles, etc... the data was never exported.
Oracle support is saying that these things should not be going in the MDSYS schema, if they do not go in there, then where should they be going? Also how do I map the definitions back to where I should be putting them? We create all of our spatial data in a schema named RESOURCES. Should I be creating tbles such as user_sdo_themes in my RESOURCES Schema?
thank you!

The MDSYS user does in fact contain all of that information, but you should not be exporting the mdsys user any more than you export the sys or system users.
When I export map metadata for a user, and I want to be able to reinsert that data on import, I will do something like the following:
before exporting, I will create metadata tables
create table my_maps as select * from user_sdo_maps;
create table my_themes as select * from user_sdo_themes;
create table my_styles as select * from user_sdo_styles;
I'll export those tables with whatever data I am exporting.
After the import, I'll do something like this:
insert into user_sdo_styles (select * from my_styles);
insert into user_sdo_themes (select * from my_themes);
insert into user_sdo_maps (select * from my_maps);
When I am sure everything looks copacetic, I will drop the tables I created for export.
hope this helps.

Combining 2 files and mapping it to a single destination file

hi all;
if i am combining 2 files and mapping it to a single destination file then do we need to define 2 sender communication channels and 1 receiver communication channel

i have done with the BPM.
steps
1 Block with corelation name
2 Fork with end condition counter not equal 2
3 fork branch 1 -- receive with corelation and container incrementing count by 1
fork branch 2 -- receive with corelation and container incrementing count by 1
4 transformation
5 send
i have source file structure during mapping:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
   <ns0:Message1>
      <ns1:SenderData1 xmlns:ns1="http://multimapping.com">
         <Name>AAAA</Name>
      </ns1:SenderData1>
   </ns0:Message1>
   <ns0:Message2>
      <ns1:SenderData2 xmlns:ns1="http://multimapping.com">
         <Name>BBBB</Name>
      </ns1:SenderData2>
   </ns0:Message2>
</ns0:Messages>
i breaked the structure in 2 and placed it in different files
<?xml version="1.0" encoding="UTF-8"?>
<ns0:SenderData1 xmlns:ns0="http://multimapping.com">
   <Name>AAAA</Name>
</ns0:SenderData1>
<?xml version="1.0" encoding="UTF-8"?>
<ns0:SenderData2 xmlns:ns0="http://multimapping.com">
   <Name>BBBB</Name>
</ns0:SenderData2>
is that all to be done

IGS and MAPS

Similar Messages

Maybe you are looking for