IGS (Business Graphs) not working

Hi,
I want to create some business graphs in web dynpro java. for this I have configured IGS URL in Visual admin
I went to Server>Services>Configuration Adapter>webdynpro>sap.com>tcwddispwda>PropertySheetdefault.
than i clicked on IGSURL and added the following entry in the custom value field
http://servername.companyname.com:40080/ and I restarted the server, but even now its showing graphic rendering problem, graphs are not coming.
Also when I run this url  ( http://server.companyname.com:40080/ ) in webbrowser its showing me   SAP IGS is running.
Also, eveything is working fine in Portal Dev server with the above configuration, graphs are coming properly in Dev Portal server , but in Portal QA server graphs are not coming even after the above configuration.
So what could be the problem in Portal Qa server when graphs are coming properly in piortal Dev server with the above configuration.
please reply..

Check the following link:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a552a4fb-0701-0010-4191-a55bbb6a9a2d?quicklink=index&overridelayout=true
Regards

Similar Messages

  • Additional Fields for ESS-Business Card Not Working for Certain Countries

    Dear Experts,
    We were trying to configure the additional fields to be displayed in Business Card - Overview Screen for all countries. We don't have problem configure and get the new fields display for Malaysia (Molga = 14) but having problem for the field to display for Hong Kong (Molga = 27) and Singapore (Molga - 25).
    The strange thing is I am following the same steps as I configured for Malaysia. Somehow it is not working for Hong Kong and Singapore. As I understand, there is only 1 place to configure in SPRO for this requirement:
    Personnel Management -> Employee Self-Service -> Service-Specific Settings -> Own Data -> Customizing of Personal Information Screens -> Determine Fields for Business Card on Overview Screen
    Please help!

    Hi Siddhart,
    Thank you for the information. We are currently in EhP3 with below Support Components installed.
    Software Component: SAP_HR
    Release: 600
    Level: 60
    Highest Support Package: SAPKE60060
    Software Component: EA-HR
    Release: 603
    Level: 34
    Highest Support Package: SAPK-60334INEAHR
    The note 1159911 provided is within SAPK-60304INEAHR. Thus, I don't think this is the root cause of this inconsistency base on the Highest Support Package installed in our system.
    Anymore hint? Anyone? Please...

  • Free busy information not working in new exchange site.

    HI,
    We have central site Exchange 2010 setup and it working fine . For business requirement we Installed new Exchange server(Mail/CAS/HUB) in new site.
    Post installed, Auto discover and mail flow are working fine but Free/busy information is not working for new site mailbox users(Not working in outlook and OWA also).
    I am having a strange error coming from outlook. When I run "Test E-mail AutoConfiguration" in Outlook, it comes up with Protocol: Exchange Http "wrong server name"
    Please share your suggestion to change/configure  "correct server name"  in "Protocol: Exchange HTTP"
    Protocol: Exchange HTTP
    Server: wrong server name
    Login name: testuser
    SSL: Yes
    Mutual Authentication: Yes
    Note : ( Protocol: Exchange RPC show correct server information and other Urls (OOF, OAB, OWA, Availability server).)

    Hi will martin,
    Thanks for your reply..
    Yes , I already pointed internal web  service virtual directory ( "https://casarrayname/EWS/Exchan...) to CAS server in new site. Other internal URLs (OWA,ECP,OOF,Availability service) also pointed to
    new site CAS server.
    But , when i check Auto discover internal URI and URL. below is the result.
    Result 1
    [PS] C:\Windows\system32>Get-AutodiscoverVirtualDirectory -Server Servername
    Name                                    
    Server                                  InternalUrl
    Autodiscover (Default Web Site)        
    Servername
    Result 2
    [PS] C:\Windows\system32>Get-ClientAccessServer -Identity servername |fl *internaluri*
    AutoDiscoverServiceInternalUri : https://casarrayname/Autodiscover/Autodiscover.xml
    When i tried to set interurl using the below command and it completed with no error but still InterURL not reflect. 
    command : Set-AutodiscoverVirtualDirectory -InternalURL https://casarrayname/Autodiscover/Autodiscover.xml

  • Interactive graph not working

    I've got an up to date Arch, and interestingly, the following graph does not work in Firefox under Arch but works in Fx under Ubuntu...
    http://www.slrgear.com/reviews/zproduct … loader.htm
    when I try to slide the buttons, they won't move. The mouse "pointer" starts to behave as if there is no button once I click on that button (any of the two)...
    Any ideas why this might be happening? I'm not sure what kind of info I should be providing, sorry...
    edit:
    info on my computer->
    ati radeon mobility (module in use seems to be radeon)
    32 bit
    firefox 3.5.3
    flash 10.0 r32 (from about:plugins)
    Last edited by vajorie (2009-10-18 21:46:39)

    Well, it does work here using firefox 3.5.3-1 and bin32-acroread 9.2-1 in openbox. I had to allow scripts (I'm using NoScript) for the side, however.

  • RRM Graphs not working on WCS 6.0?

    Hello,
    Using IE 6.0, our "Channel Change Reason" graphs do not work since we have upgraded to WCS 6.0
    The graphs are located at Monitor > RRM.
    Adobe Flash Player 10 is up to date as well.
    Any ideas?
    thanks,
    ryan

    Select Help ▹ Installed Plug-ins from the Safari menu bar. Besides the following, what plugins are listed?
    iPhotoPhotocast
    Java
    QuickTime
    WebKit built-in PDF

  • E-Recruitment,Syncronization for Employee and Business Partner not working?

    hi there,
    i itend to create a business partner for employee in SAP E RECRUITMENT but when i run the report HRALXSYNC for an employee, the result i am getting is total blank. I suppose there should be some errors if it is not working properly, but the the screen after running the report is total blank.
    are any prior settings must me meet before the business partners can be created using HRALXSYNC?
    thanks you

    HI Ravi
    Requirements to use the report are the activation of the integration for buisness partner. You could get details from sap note  550055.
    You have to switch on the following keys in table T77S0  with  SM30:
    Group    Sem. ID
    HRALX   HRAC           to  'X' for global HR-Integration
    HRALX   OBPON        to "ON"  for activate the integration between organization object  and business partner 
    HRALX   PBPON         "ON"  for activation the integration between central perosn and business partner
    Hope this helps.
    Regards
    Bernd

  • People and Business Widget not working

    I cannot get these to work; I get the following messages:
    People: "Data Unavailable" and
    Business: "No Results Found"
    Please advise...
    Imac,
    Intel Core 2 Duo
    2006 Intel 10.6.8

    These are Apple widgets that came bundled with dashboard. I used mine often now it's not working.
    If Apple just disabled it  with out so much as a heads up, that's not OK and not a way to treat loyal customers.

  • People and Business Widgets Not Working

    Hi,
    My people and business widgets have stopped working. Instead of having fields to enter name, zip, etc., there are blue boxes (that look like legos) with questions marks.
    I have read elsewhere that this means a needed plugin is missing.
    Removing and replacing the widgets doesn't help.
    Creating a new user account doesn't help.
    Deleting symbolichotkeys, dock, dashboard, dashboard.client, and widgets plists doesn't help.
    I downloaded the 10.4.4 update and used Pacifist to extract just the people widget and placed it in both the system and user library/widgets folders. Didn't work.
    I called apple care and they told me to make a posting here. I really hope someone can point me in the right direction!
    Thanks in advance for you time.

    These are Apple widgets that came bundled with dashboard. I used mine often now it's not working.
    If Apple just disabled it  with out so much as a heads up, that's not OK and not a way to treat loyal customers.

  • Busy Search Not Working

    Hey All - thanks for looking at the post...
    I have GWE 7.0.1 Gateway up and running, but am unable to get busy search
    to work in either direction.
    From GroupWise to Exchange a free busy search is executed and I see it
    logged in the GWE gateway logs, but nothing is returned to the GroupWise
    client during the busy search even though there are appointments posted for
    the day for the Exchange user(s).
    From Exchange to GroupWise the busy search returns nothing. I have run
    through the manual like 10 times and all configuration options have been
    configured with the appropriate options. Anything I am missing that might
    not be documented?

    I have resolved the problems that I was having and wanted to share what I
    found out. Turns out there was a bug in the 1/23/07 file version of the
    exgate 7.0.1. A new version was given to me by Novell support, but I don't
    know what the timestamp on the file is from novell b/c windows screwed it
    up, but I don't see that's it's been released yet on downloads.
    The bug was that you could not do a busy search from GroupWise to Exchange
    if the primary SMTP namespace for the Active Directory users did not match
    the Active Directory domain name. Basically, the gateway would try to
    perform a busy search using an LDAP query on username@ADdomainname and
    would fail if you gave your users an alternate primary SMTP namespace with
    a recipient policy in Exchange.
    Hope that helps someone b/c it took me about a week working with Novell to
    get it figured out. The gateway support folks (still in the US thank
    goodness) were awesome.
    > Hey All - thanks for looking at the post...
    >
    > I have GWE 7.0.1 Gateway up and running, but am unable to get busy search
    > to work in either direction.
    >
    > From GroupWise to Exchange a free busy search is executed and I see it
    > logged in the GWE gateway logs, but nothing is returned to the GroupWise
    > client during the busy search even though there are appointments posted for
    > the day for the Exchange user(s).
    >
    > From Exchange to GroupWise the busy search returns nothing. I have run
    > through the manual like 10 times and all configuration options have been
    > configured with the appropriate options. Anything I am missing that might
    > not be documented?

  • Script busy or not working

    FF or Google or Extreme Security cause? Upon opening FF, it crashes occasionally. I have version 3.6.23 with a Google FF search page and I use Zone Alarm Extreme Security's latest firewall, etc. When it does crash, I get a message as follows: A script on this page may be busy or it may have stopped working. You can stop the script now or you can continue to see if the script will complete. The script is chrome://zonealarm_extreme_security/content/ctoolbar.js:412

    Thanks, Cor-el. However in the process of updating my Zone Alarm Extreme Security, I'm into a whole other problem. When I tried to uninstall my current version of ZA in order to update to the newer version (ZA techie's advice), I couldn't recall my Administrator password in Program Control of my PC. His advice last night was to go into Program Control and delete ZA, then follow the steps as per 2 other links which he provided - that I installed to my Desktop.
    The ZA techie has sent me a HUGE list of steps I should take to overcome this but I see this morning that his preamble is "The ONLY way to remove a '''ZA''' password that is forgotten...is to remove the database files associated with True Vector, as follows".
    Before I go into all of this, I'm going to try one other ZA password that I do recall (while in Program Control) on my PC - can't see how this would work. ZA has stated that their firewall is compatible with FF7 so that issue is not a concern. I read your Mozilla link above and understand now that there is no urgency to update to FF7 but do you foresee any reason not to?

  • Saved Queries in Business Partners not working

    Hi All,
    I have 2 saved queries that populate the following Business Partners fields with default data:
    Group - I have a default group for a Vendor and a different default group for a Customer
    ShipType - I have a default Ship Type for a Vendor and a different default Ship Type for a Customer
    To trigger these saved queries, I have used Auto Refresh when BP Type changes.  The problem I am having is you have to change the field from Customer to Vendor and back to Customer again to trigger the saved queries for a Customer.
    Questions: 
    Is there an alternative to using BP Type that will trigger the saved queries that return a different result depending on the BP Types?
    Should I set the default programically instead? And, if so, what event will capture if an 'Add' is a customer or a vendor - keeping in mind you do not change the combobox for customer (because it is already displayed in the combobox as the default in SAP)?  Also, keep in mind the combobox value is returning =Nothing unless I physically change it.
    Any suggestions would be greatly appreciated!
    Ramona

    Hi All,
    I would like to let you all know I have used the following to solve my question:
    1)  The event that works well at capturing whether the data returned is a Customer, Vendor or Lead in FIND mode (when the form is first loaded)is SAPbouiCOM.BoEventTypes.et_FORM_DATA_LOAD.
    I have set default data and default UDF categories depending on if the data returned is a Customer, Vendor or Lead.  I have removed the saved queries.
    2)  For the ADD, I have used a menu event that will force the combobox to change from the default of "customer" to "vendor" when someone clicks on the add button.  Then I have added code to the Combo_Select Event that will populate the defaults.
    I appreciate the responses I received.
    Ramona

  • Web graphs not working

    I have just come back to Apache 1 from 2.
    But the graphs aren't working. I have to Combined.
    %h %l %u %t "%r" %>s %b "%{Referer}i" "%{User-Agent}i"
    Anything alse need doing?

    "Web sharing monitoring tools"?  For reading the logs?  For outage notifications?  For security?
    The web server used in OS X and OS X Server is Apache.  There are all sorts of tools around that can be used monitor Apache.  That can involve changing the log file format generated, but that's an easy change.
    Web sites such as pingdom or zerigo watchdog can be used, as can ifttt or other such services.  A folks have even converted Google Docs into a web site monitor, if you're into creative solutions.
    AFAIK, VirtualHostX isn't a monitor, it's a tool that — like the server tools — enables and manages Apache virtual hosting on OS X, whether the integrated Apache or MAMP or such.  With OS X Server, the tool manages what Apple calls "Sites".  Haven't had much use for that, as Server Admin.app has met most of my requirements there, and directly editing the configuration files has resolved the rest.
    I see various different tools named WebMon, so I'm not certain which you're looking at.
    Some of the more general monitoring tools include munin and monit, cacti and zabbix.  There are many others.
    I'd suggest posting a different (new) question for your quest for suggestions here, with some details on what you're monitoring (just web? mail? snmp?  other services and protocols?), how much you're willing to implement or maintain yourself (there are brute-force ping scripts around, for instance)  and some general idea of your budget.

  • Graphs not working after upgrade to 11.1.1.6 - MBean Error

    Hi,
    I am facing one wierd issue after upgrading from 11.1.1.5 to 11.1.1.6. When I run a report with graph, the result shows some garbage value. None of the graphs work - even the pie chart. When I logged in to EM and looked into the log file, it seems to be an Java Error related to MBean browser configuration and privileges.
    The error log is as follows:
    Message     
    MBean operation access denied.
    Supplemental Detail     MBean: oracle.as.management.mbeans.register:type=register
    Operation: getRegisteredOpmnMBeanName(java.lang.String)
    Detail: Access denied. Required roles: Monitor, Admin, executing subject: principals=[]
    java.lang.SecurityException: Access denied. Required roles: Monitor, Admin, executing subject: principals=[]
    at oracle.as.jmx.framework.generic.spi.security.AbstractMBeanSecurityInterceptor.checkAccess(AbstractMBeanSecurityInterceptor.java:371)
    at oracle.as.jmx.framework.generic.spi.security.AbstractMBeanSecurityInterceptor.checkOperationAccess(AbstractMBeanSecurityInterceptor.java:288)
    at oracle.as.jmx.framework.generic.spi.security.AbstractMBeanSecurityInterceptor.internalInvoke(AbstractMBeanSecurityInterceptor.java:189)
    at oracle.as.jmx.framework.generic.spi.interceptors.AbstractMBeanInterceptor.doInvoke(AbstractMBeanInterceptor.java:252)
    at oracle.security.jps.ee.jmx.JpsJmxInterceptor$2.run(JpsJmxInterceptor.java:358)
    at java.security.AccessController.doPrivileged(Native Method)
    Which parameter/attribute permission do I modify in EM/Console to get the graphs working? Is there something that needs to be modified in System MBean Browser configuration?
    Thanks,
    Ronak Shah

    Hi,
    this is due to the browser.
    we had same issue. below mention step we have taken and the issue is resolved for us.
    Clear the browser cache and re-load the page or log in to OBIEE. This will allow the new upgraded version of the javascript file to be loaded.
    and check which version of browser are you using.
    OBIEE 11.1.1.6 is certified with below mention browser.
    Chrome 12+
    Internet Explorer 9.x
    Firefox 6+
    Thanks

  • Business Catalyst Not Working

    I have an Adobe Cloud full paid monthly account.  I have used Business Catalyst to preview sites for clients for about a year and a half or more.
    I did not use it for a few months and then recently tried to use it again.
    Every time I try to upload my new site to BC and try to login it says "unknown error." I have reset password twice but password is correct.
    Tech support at Business Catalyst is not being helpful except to ask me what software I'm using and my login: 
    I use Muse.
    What is going on?  I thought that my monthly $50 to Adobe included a free Business Catalyst account?  No?
    The help and FAQ pages never seem to answer the questions I have. 
    I log in to my Adobe account okay but I can't seem to log in to BC. 
    BC first forced me to change my account password.  Then they said that I had to change it back to my Adobe ID password.
    Now each time I try to log in it says there is already an account with that email.
    I think I'm going to lose my mind. 
    Customer/Tech support at other cloud systems is not this difficult to get through to.
    Max Mitchell

    Getting this error message:  This Adobe ID email address is already registered with Business Catalyst and cannot be merged with a different Business Catalyst account.

  • Java with Business Objects not Working under Lion 10.7.5

    I had been successfully running Business Objects under Lion 10.7.5 and Safari 6 until this week.  The recent changes in Java under Apple have bitten me.  I installed Java SE7 Update 9 today, but it doesn't fix the problem.  I receive the error report that follows (in blue)   I've tried to get this to work under Safari and Firefox, but receive the same error in both environments.  Any suggestions? 
    Error Report....
    Java Plug-in 10.9.2.05
    Using JRE version 1.7.0_09-b05 Java HotSpot(TM) 64-Bit Server VM
    User home directory = /Users/TennisonBay
    c:   clear console window
    f:   finalize objects on finalization queue
    g:   garbage collect
    h:   display this help message
    l:   dump classloader list
    m:   print memory usage
    o:   trigger logging
    q:   hide console
    r:   reload policy configuration
    s:   dump system and deployment properties
    t:   dump thread list
    v:   dump thread stack
    x:   clear classloader cache
    0-5: set trace level to <n>
    java.security.AccessControlException: access denied ("java.util.PropertyPermission" "disableUnsupportedFeatureException" "write")
              at java.security.AccessControlContext.checkPermission(AccessControlContext.java:36 6)
              at java.security.AccessController.checkPermission(AccessController.java:560)
              at java.lang.SecurityManager.checkPermission(SecurityManager.java:549)
              at java.lang.System.setProperty(System.java:781)
              at com.businessobjects.wp.tc.TCMain.<clinit>(Unknown Source)
              at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
              at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessor Impl.java:57)
              at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructor AccessorImpl.java:45)
              at java.lang.reflect.Constructor.newInstance(Constructor.java:525)
              at java.lang.Class.newInstance0(Class.java:372)
              at java.lang.Class.newInstance(Class.java:325)
              at com.sun.deploy.uitoolkit.impl.awt.AWTAppletAdapter$1.run(Unknown Source)
              at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:241)
              at java.awt.EventQueue.dispatchEventImpl(EventQueue.java:721)
              at java.awt.EventQueue.access$200(EventQueue.java:103)
              at java.awt.EventQueue$3.run(EventQueue.java:682)
              at java.awt.EventQueue$3.run(EventQueue.java:680)
              at java.security.AccessController.doPrivileged(Native Method)
              at java.security.ProtectionDomain$1.doIntersectionPrivilege(ProtectionDomain.java: 76)
              at java.awt.EventQueue.dispatchEvent(EventQueue.java:691)
              at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:24 4)
              at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:163)
              at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:15 1)
              at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:147)
              at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:139)
              at java.awt.EventDispatchThread.run(EventDispatchThread.java:97)
    java.lang.ExceptionInInitializerError
              at com.jidesoft.plaf.vsnet.VsnetMetalUtils.initComponentDefaults(Unknown Source)
              at com.jidesoft.plaf.LookAndFeelFactory.a(Unknown Source)
              at com.jidesoft.plaf.LookAndFeelFactory.installJideExtension(Unknown Source)
              at com.jidesoft.plaf.LookAndFeelFactory.installJideExtension(Unknown Source)
              at com.businessobjects.wp.designer.DockManager.init(Unknown Source)
              at com.businessobjects.wp.tc.TCMain.setLookAndFeel(Unknown Source)
              at com.businessobjects.wp.tc.TCMain.globalInit(Unknown Source)
              at com.businessobjects.wp.tc.TCMain.init(Unknown Source)
              at com.sun.deploy.uitoolkit.impl.awt.AWTAppletAdapter.init(Unknown Source)
              at sun.plugin2.applet.Plugin2Manager$AppletExecutionRunnable.run(Unknown Source)
              at java.lang.Thread.run(Thread.java:722)
    Caused by: java.lang.ClassCastException: java.util.HashMap cannot be cast to java.awt.RenderingHints
              at com.jidesoft.swing.JideSwingUtilities.<clinit>(Unknown Source)
              ... 11 more

    I have found my own solution, if only temporary, until another Java update clobbers me…
    I followed  the Java instructions to delete Java 7 at http://java.com/en/download/help/mac_uninstall_java.xml
    Then I followed the Apple instructions to get back to Java 6 at http://support.apple.com/kb/HT5559, which involves using the Terminal application.
    Then I closed Safari, and relaunched.  It is now back to where it has been for the past year, working!

Maybe you are looking for