IGS Graph not displayed for GRC

Hello,
After installing of SAP Netweaver 7.0 EHP1 AS JAVA, I have configured IGS as per install guide 7.3 section, but when I execute the URL http://<server_name>::40080, I do not get the graph displayed.
I only get a screen with 1 line message stating "IGS is running".
Can anyone tell, why the IGS graph is not getting displayed. Is there any additional configurations, steps, OSS Notes etc., for IGS, that I have to do (to get the graphics displayed).
Thanks,
Haleem

Thanks Frank and everyone for the updates.
I have successfully completed AS JAVA install and as a part of the document "SAP GRC AC 5.3 Pre-Installation Slide Deck.pdf", I checked the IGS graphs, SLD connection etc.
I am now installing GRC AC components and will check whether the charts are displayed, once RAR install is complete.
So far, SLD test is successfull and I get message "IGS is running", when I execute http://servername:40080
Thanks,
Haleem

Similar Messages

Graph not displayed under Target- dbname- Performance

Performance graph not getting displayed in oem grid control. Here is how I am navigating to the screen: Targets->Databases->dbname->Performance. For some databases that are being monitored, the graph is displayed, for some it is not displayed. Is there any package or procedure that need to be executed to activate the graph.
Thanks.

10.2.0.3 is my grid version. I have 4 databases being monitored and 2 of them have the graph displayed. I am not seeing the graph for the other 2 databases. I went into preferences and checked the status of tuning packs and they are all enabled in the grid control. I am not sure what else to check for?

Material Description is not displaying for few records in Report

Dear Experts,
Report Material Description is not displaying for few records in Bex Report but for records it is coming and even the heading of the material Description is also not coming for this report.
Cud u plz suggest a good solution for it.
Regards,
Sai Phani.

Hi Phani,
For the text of the material in records, check if there is text maintained for that material in the master data. also try by changing the text to medium text and long text.
regarding header, you will have same heading for key and text, you may use Materail ID / Description as the heading if you want.
regards,
Rk.

Rate and accessable value is not displaying for the tax invoice output

Hello All,
Rate and accessable value is not displaying for the tax invoice output. Rest of all outputs for invoices shows Rate and accessable value.
Scenerio is free of charge sales order (samples) removing the goods from pant so excise invoice has been created and also updated. but for tax invoice out put rate and access value is not displaying.
Pricing procedure: In pricing procedure account keys have not been maintained because there is not gl account upadation during billing for free of charge delivery.
Thanks & Regards,
ramesh

hi Gurpreet,
You can add values to that transient column programatically,either by getiing the row from the iterator and then row.setAttribute('Column_name','Value');
Or providing value to it in the SQL...

Overnight, text body of emails will not display for messages in inbox-only the from and to and a subject line displays. Draft messages in Ipad display fully. Inbox emials display fully on my main Dell computer and my Iphone. Any ideas? Duanekot

Overnight, the taxt body of emails will not display for all messages in the inbox. Only the From and To and a subject line display. All messages in my Draft Mailbox display fully. Also, all emails in my Dell laptop and my Iphone display fully. Any ideas?? Duanekot

See if this helps .... Reset the iPad.
Hold down on the sleep and home buttons at the same time for about 10 seconds until the Apple logo appears - ignore the red slider bar - let go of the buttons and let the iPad start up. Then check your emails.

Contact Names Not Displaying for My Conversations ...

Hi Contact Names are Not Displaying for My Conversations in C7.
I took C7 in April 2011.Suddenly today (July 26th 2011).Names are not displaying and also my mobile became very slow when accessing ..
Please tell me what to do

You are welcome. Please resolved the thread?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Link Button Not Display for Tax Amount

Hi Experts,
I have one Problem
I am creating A/R Invoice Document and I have assing Tax Code for Item
It will show Tax Amount but link button or drill button not display for tax amount
pls give me solution
Warm Regards,
Sandip Kokate

HI
How to Clear Chumb
And I am Selecting Tax Code but still it will not show Tax Amount Link button but Tax Amount is perfectly Match
Regards,
Sandip kokate

CUCM: Third Party SIP Phone "Caller ID" is not displaying for outgoing calls

Hi Team,
we are running CUCM 9.1(2a),
we have integrated Third Party SIP Phone(Avaya 1230 SIP Phone) with CUCM,
Issue: Third Party SIP Phone "Caller ID" is not displaying for outgoing calls, we are able to see only the dailed Number,
When "A" calls to "B", "A" can see only the dailed number of "B" but not the "Caller ID"
Regards
Ananthakumar

Are A and B both Avaya phones?
So it looks like you're not seeing the alerting name/connected name getting updated then? Do you have alerting names configured on the directory numbers? Might need to take a look at the SIP messaging to see if the alerting name/connected name is being sent to the Avaya phones and maybe they just aren't displaying it. Might just be something that needs to be tweaked in the 46xxsettings.txt file.

CM29 - bar graph not display in WebGui while is it visible in GUI

Hi,
We are trying to see and work on CM29 through SAP GUI for HTML. After making required settings it not pulling up BAR Graph into WebGui and saying error message "Unknown Error:RFC". We have checked on IGS RFC settings and all are working fine but still we are recieving error message.
1. Can the bar graphs can be seen on WebGui?
Regards,
Amol

Hi Amol,
This is a limitation
The IGS does not support the Bar chart
See note: [1299016|http://service.sap.com/sap/support/notes/1299016] Network and bar chart cannot be used in SAP GUI for
HTML
This note does not provide this functionality - but provides a different
message other than "ListenerRfc : Unknown function"
You cannot display this graphic via the WEBGUI, you will need to use the
SAPGUI if you wish to use transaction "CM29" to view the chart
Regards,
Oisin
Edited by: Oisin ONidh on Nov 28, 2011 3:10 PM
Add link for note

Data not displayed for Key Figure of MultiProvider

Hi Folks,
I have created a Query on MultiProvider which is actually copied from another Query(based on InfoCube) using RSZC. Now I have the problem with display of data for a KeyFigure in report. No data is displayed for the KeyFigure. The MultiProvider has Two InfoCubes where the KeyFigure is related to one of the two Cubes. The data is shown at the MultiProvider level. I have also checked for a new query on the same MultiProvider. Here too the data is shown in the report for the KeyFigure. But it's not showing in the Query which is copied from another.
Any assistance on the same is really appreciated.
Thanks,
Raju. Dupadally

Hi Diaz,
Thanks for your answer. Could you make it understandable. I haven't understood fully.
Thanks,
Raju. D

Fixed values of dynamic attributes are not displayed for bid response

Hi
I have created a bid with dynamic attributes and have weighted the options with fixed values. I publish the Rfx (bid) and all is ok. The problem is that the fixed values are not displaying when doing a bid response.
We are using SRM 7.0
Can anyone help?

No. Not yet. I think it is a bug. You should create an OSS message to SAP and ask them to pay special attention to the following code block:
Class: /SAPSRM/CL_CH_WD_DODM_DYNATTR
Method: /SAPSRM/IF_CLL_MAPPER~REFRESH
At the end of the method, look for code context:
IF lv_object_type = c_qte.
*Set the Fixed Values Table to Invisible
lv_visible = abap_false.

Parent child relationship is not displaying for IDOC_OUTPUT_ORDERS (PO)

Hi,
Can somebody help me the reason why parent child relationship not displaying properly for ORDER05 basic type?
If we go in details about the problem, a purchase order is creating in R/3 through EBP. To modify my requirement I am using userexit EXIT_SAPLEINM_002. Here I am appending the records in the segment for E1EDKT1 and E1EDKT2. IDOC is creating with an error of status record 26.
When I check in the transaction WE19 for the respective IDOC the data is showing correctly for all the segments including e1edkt1 and e1edkt2 segments and also I check in the table EDID4 segment number is showing correctly and the for the segment E1EDKT2 PGNUM also showing correctly, but when I see the IDOC in the transactions WE02 unable to see parent child relationship between E1EDKT1 and E1EDKT2 segment. Simply the data is displaying one below other like other segment.
I don't know the reason why it is displaying like that?
If anybody is having the solution is highly appreciable.
Regards,
Noorul

hi hassan,
When you are appendng the REcods which belong to the purticular segment..
all the segment needs to be appended in in the proper order as in the WE30..
I think you are appending the segment E1EDKT2 at the end of the EDIDD.. or IDOC_DATA in the user exit.. .. eventho no eerror will be displayed but idoc will generted with sataus 26 .. if check the STATUIs Recored u ewill find the SYNTaX ERROR.
Sollution for ur probelm is... don append the E1EDKT2 at the lastr instead you ahve to insert the segment E1EDKT2. only afer E1EDKT1....
Tehn you r problem will be solved.. I had faced the Same proble when i worked on material maser idoc..
Close this thread if when u r problem ise solved
Reward if helpful
Regards
Naresh Reddy K

Thumbnails do not display for some images

I have a large library with over 65,000 images.
In some albums and projects the images fail to display in the browser....see here for an screenshot
http://picasaweb.google.be/lh/photo/tOj7FY4lclLxr8YMEBV8ZA?authkey=_Zrhrl8QDyA
If I go into filmstrip view I can make them appear but this does not seem to stick...ie when I quit and restart aperture the same images fail to display.
I have tried selecting and "generate thumbnails" as well as "update previews" and whilst it chunters away working on it for quite a while the images stll persist in not appearing.
Suggestions?

Sorry to hear that....I still have no really good news. What I did notice is that if I enlarged the thumbnails above a certain size then they all displayed....but once they dropped below a certain size the ones that did not display, stopped displaying!
This was so boring that I deleted the entire project (after doing an export, including masters) and then imported the originals again.
Now everything works fine...but of course I have lost all the tagging and adjustments that I did since importing....so I am not happy at all....but at least I do have a working library.

Buttons are not displayed for the first time when drawImage method is used

Hi
In my swing window 2 buttons are there and when clicking these buttons, it should display an image . The two buttons are displayed at the first time and I can click on it . While clicking a button , the corresponding image is also got displayed. [ I am using drawImage() function for it] But what the problem is, then the two buttons are not displayed and it will be displayed again when the mouse moves along the position of these two buttons. And this problem occurs only at the first time..When they are on the window on a second time, they won't vanish when the image is displayed when clicking it. Is this the problem with paint() method?. I am using start() method also.
Please help me!
Thank You

Hi
This is not my exact program, that has a large no: of code. So I am putting here a sample one. One thing I would like to point out is that , I can see the buttons at the time of loading the applet and suddenly it vanishes and the image is drawn. Then if I move the mouse along the position of these buttons , they got displayed.
import java.awt.*;
import javax.swing.*;
/*<applet code = MyClass width = 500 height = 500>
</applet>
public class MyClass extends JApplet
Image img;
JButton b1,b2;
Container cp;
Canvas1 cv;
class Canvas1 extends JPanel
public void paint(Graphics g)
super.paint(g);
g.setColor(Color.black);
g.fillRect(0,0,500,500);
img = getImage(getCodeBase(),"image1.jpeg");
g.drawImage(img,20,20,this);
public void start()
cv = new Canvas1();
cv.setBounds(0,0,500,500);
cp.add(cv);
public void init()
setLayout(null);
cp = getContentPane();
b1 = new JButton("Button1");
b1.setBounds(1,1,100,30);
cp.add(b1);
b2 = new JButton("Button2");
b2.setBounds(200,1,100,30);
cp.add(b2);
It would be very helpful to me if you could fix the problem.
Thank You.

"Define query parameters" popup in Dataset properties - Refersh field, not displayed for Sps in SSDT 2010 (Works fine in BIDS)

When we upgraded our SSRs projects to 2012, we are facing an issue in Data tools environment.
When we click REFRESH FIELDS button in Dataset properties, With query type as SP (For all our sps), the "Define query parameters" popup is not displayed.
When we checked the SQL Profiler for queries executed at back end , NULL values are used for parameters.
But when we Used the QUERY DESIGNER button, and clicked execute for sp, the popup comes.
For User defined Functions, the Popup comes correctly.
In BIDS, still we can open the RDLs and do the operations correctly
Please advice

Dear Wendy Fu
My Scenario is different.
In Query Designer, Every thing is fine (Parameter Popup is coming, and fields are populated under data set)
But what we need to do is
1, Select Query Type As SP
2, Select the required SP
3, Click Refresh Button
4, A "Define
query parameters" window popsup
5, Provide values and click Ok
6, Fields will be populated under the dataset
The issue we face is that, we are not getting the Define query parameters popup,
Hence NULL values are passed to execute the sp, to retrieve the fields set.
The Work around we are using now is editing the sp, and use
set @Parameter = Value
for each parameters in sp, and then we get the fields populated under dataset, when we click refresh.
The issue exists in both MSDT for
Visual studio 2010 & MSDT for Visual studio 2012.
But every thing is fine in BIDS with VS 2008 Shell for the same RDL

IGS Graph not displayed for GRC

Similar Messages

Maybe you are looking for