IGS - Problems with SAPGISXML interpreter

Hello,
I'm trying to setup an IGS (standalone) to work with an ArcIMS server from ESRI and provide maps to a WebDynPro application.
I've noticed that, when I start the service, I get the following message in the trace file for the SAPGISXML interpreter:
trc file: "C:Program FilesSAPInternet Graphics Serverlogsapgisxml_0151D2B0530_0.trc", trc level: 1, release: "640"
Tue Mar 15 14:05:36 2005
[Initialize] Could not load config file sapgisxml.ini. Exiting...
I've checked both installation packages for IGS SP 7 and 8 and this file is nowhere to be seen. Can anyone provide me with the contents and location of this file? I believe the file will hold the configuration needed to connect to my ArcIMS server. Am I right?
Thanks in advance,
Ricardo

Hi,
Did you ever got this to work?
I try to set up GIS connection as well but having a hard time to find any good documentation.
Do I have to create sapgisxml by my self?
Br
Mikael

Similar Messages

  • Problem with converted PDF from OTF

    Hello,
    im having a problem with character interpretation in PDF document when i convert it from OTF.
    At the moment im using Arial true type font in my smartform, im using function module CONVERT_OTF to convert OTF to PDF.
    When i open PDF document with Adobe reader it looks fine, but the problem is when im trying to convert PDF file to other format for example PNG, or trying to copy and paste text from PDF document.
    im getting Klaipìda instead of Klaipėda, it seems that baltic symbol "ė" is interpreted like "ì", other baltic symbols are interpreted as they should, there is problem only with character "ė".
    have anyone faced that kindof problem? or maybe anyone know the solution for this problem? if so please tell me.
    Best regards,
    Rimantas Sebeckis.

    Hi Rimantus,
    Did you check the fonts installed in your system,,,
    As PDF is a unchangeable format, it doesnt depend upon the installed fonts in the system,,
    but when you copy, you need some fonts in system,, if not you will get the same problem,,,
    Thanks & regards,
    Dileep.C

  • Strange problem with IGS

    Dear Experts
    I have a strange problem with IGS
    My IGS server is running perfectly when I execute SIGS at my server system and also thrw Http link, and in GRC also
    But when I tried to execute the same tcode SIGS from internet thrw another system it is blank.
    Even risk terminator also blank due to that.

    Explain what you meant by internet thrw another system?
    IGS is integrated into the SAP kernel and make sure your kernel files are intact when compared to your server with another server you quoted.
    Check the program name is IGS.<SID of the SAP instance> in the RFC dest IGS_RFC_DEST & GFW_ITS_RFC_DEST.

  • Problem with IGS

    Hi people,
    I have got a WAD with some Graphic and suddenly started an error about IGS. I don´t know what the reason for that...
    The message error is "Internal error in communication with the IGS (partial diagrams)"
    Message number is RSWWW 005.
    Someone have some idea about that?
    Thanks.

    Hi Java man,
    Regarding your case ..
    To ensure this problem is caused by IGS, you can go to tx: RSRT, then go to IGS Test.
    If it's error, yes it's caused by IGS.
    Usually to overcome this problem, i asked the basis team to restart the server.
    Then after that, you can check the IGS again with the above technique again.
    Hopefully it can help you a lot ..
    Regards,
    Niel.
    thanks for the points you choose to assign.

  • The Problems With Logic (as I see them) - PART TWO!

    Hello again,
    It seems to be a tradition now that as I compose on a track, I keep a text editor open so that I can jot down all the annoyances and problems that I encounter during my creative process... Anyone who missed the previous edition of this topic, please visit PART ONE, here:
    http://discussions.apple.com/message.jspa?messageID=3605456#3605456
    That said, here I give you "The Problems With Logic Part II":
    1. Logic should clear the playback buffer everytime you play. Quite often you start playing and there is trailing reverb/note events from various audio instruments and plug-ins.
    2. The sample edtor "save selection as" has no memory of where you previously were in the file browser.
    3. If you double click on a wave form, the sample editor opens up with the wave form you double clicked on... Great.. But now, if you go and double click on another wave form somewhere, it just takes you back to the sample editor with the same previous wave form selected (not great). This is incredibly annoying if you are attempting to save out certain edits-- Quite often you will end up saving 5 or 6 of the same exact waveform, thinking you were saving each individual one. GRR!
    4. Key commands.. if you try to assign a key command to something that is already used by another feature, you are presented with a window warning you that it already exists.. If you click cancel, then you can no longer enter any keys in the key field.. You are forced to close the key commands preferences window and start over.
    5. Key command window: You should be able to search by command.. For example, if I want to find out what "o" is assigned to, I should be able to search by O-- Further, you should be able to sort the key commands by clicking the column titles "key", "command" -- or "midi"... After all, we can sort by name, date, size, etc in the finder by clicking on these column titles.
    6. Tempo Tap feature-- I am quite confused by this. There should be a simple way to tap and define a tempo. When ever i try to do this, the tempo is only temporarily changed until I stop playing, and most of the time I get error alerts about trying to sync audio and midi (mind you, when there are absolutely no parts in the entire arrange window). The manual states that with "tempo recording" checked on the tempo interpreter window, that the taps will record tempo changes, but this does not work. I tried doing this, tapping the key command I defined to tempo tap (ctrl-shift-t), and I was tapping at various speeds-- many taps fast.. and Logic recorded tempos of 99-101bpm.. I was tapping atleast around 175-180bpm. I then tried tapping slowing, and Logic recorded tempos of 99-101 again... so this feature obviously is full of bugs.
    7. When loading songs, as soon as various plugins such as Kontakt, exs24 begin loading samples, it brings logic to the front. If you're working in the background in other applications while waiting for your songs to load, you are rudely interrupted from what you're doing (such as, selecting from a menu, typing a document, etc) only to be forced to watch a status bar fill up.. and then all key presses at that point become error beeps.
    8. Logic's sample memory easily becomes messed up and crazy. Quite often when using AU instruments such as BFD, Culture, and even Synthogy's Ivory. I will switch to that particular track to play on my keyboard, and each sample will be full of horrible pops and clicks-- the kind that destroy speakers. Other times, in a sample of a string for instance, all of a sudden after one second will be a pop and then the sample will be playing at a completely different pitch... I have to remove the AU instrument and reload it at this point.. This happens quite often. Logic should offer a 'buffer reset' so that you can just flash plugins but they reload whatever preset they were set to.
    9. Volume faders resolution are lame! There is no reason why you shouldnt be able to access +1.0, +1.1, +1.2, +1.3, +1.4, +1.5, +1.6, +1.7, +1.8, +1.9... Further the display is only so wide and you can't even read the decimal values for numbers -10 and lower. They just appear as 10.
    10. When a movie is open, and you are viewing the video output via FIREWIRE, there is a mini-floating window which contains the smpte, position, and movie start information-- However you cannot modify any of these values. You have to switch video output back to "WINDOW" to change the start position of the movie. This is obviously a bug.
    11. Changing the movie's start time is very user unfriendly. There should be a simple way to specify to start at a moment of time relative to SMPTE-- So you can just say "+9:15" for example, and it would take you in 9 minutes and 15 seconds, rather than how it is now where you have to think backwards from SMPTE code and subtract.
    12. You cannot view video as a window AND output to firewire. There is no reason why you shouldn't be able to do this. For example, if I wanted to output my video to a monitor in a vocal booth-- I can do this.. but I can't see what the vocalist is seeing on my own screen! This is just nonsense. You should be able to output to the screen (desktop mode or floating window) as well as an external firewire device.
    13. Saving a song with a movie open should mean that when you load that song, the movie should be up and exactly as it was prior to saving. As it is now you have to select "open movie again".
    14. There is still definitely a bug in track automation-- this was really bad back in version 4, but there is still something not quite right here where starting playback will not always guarantee that the automation data is being read.. And in my experiences it results in volumes being incorrect until you stop and play again, and in some cases it will not work at all unless you plot some automation points. This is an intermittent issue-- but quite often activated by placing an audio region from the audio window on a track (SEE VIDEO).
    WATCH VIDEO OF THIS BUG:
    http://collinatorstudios.com/www/logicbugs/logicautomationbug.mov
    15. In the arrange window, sometimes when zoomed in tightly, all parts on a track are selected, and you think that only the part that you are looking at is selected.. you move this part, and now all of your parts are off. Logic should have some kind of visual aid to let you know when ever you are moving multiple selections... Something like, the parts you are moving will highlight a dfferent color or something... This is a similar problem I have with the loop area of the screen.. You can accidentally turn it on when in the matrix window, and have no idea unless you look down at the transport, but with me for example, my transport is at the very bottom of the screen and I am not looking there most of the time.
    16. Automation data, when two points are semi-close to each other, suddenly the value of the data is no longer shown.. I can understand that when you are zoomed out, and there is simply no space for this to visually appear, that's appropriate. But as it is now, it doesn't display this information when there is plenty of space for it to be visible.
    17. Logic should let you set audio track inputs to the various outputs (1-2, 3-4, etc) and buses.
    18. clicking on a track selects ALL parts. This is so so so annoying. How many times have I been editing voice over, and selecting a track, thinking I am shrinking the length of a part, and to find that ALL parts have been shrunk.. SO ANNOYING!!!! This needs to not happen, and there should be a simple way to right-click a track and it will have an option "select all regions"... also, when you click on a track and all parts are selected, if you horizontally zoom, logic zooms into the beginning of the track, rather than the song locator. I don't know what the LOGIC behind this is, but it's not very helpful, it actually is very frustrating.. Zooming should always move towards the song locator position.
    19. EXS 24 should have a "reverse/backwards" button so that samples played are backwards.
    20. Logic should offer a way to globally increase or decrease a specific automation type (especially volume) globally for all tracks... So if you have detailed crescendos that start at -3.8 and end at +1.6, you can add 3db to this and it will now be at 0.8 and end at 4.6.
    21. If you have multiple tracks of the same track (such as three Audio track #1's)-- say you are recording guitar parts, and just copying the track and muting the previous track as a method of maintaining multiple takes for later auditioning. If you draw automation volume data on this track (it appears on all 3 tracks), and then if you delete the audio from one of the muted tracks and tell logic to KEEP it, suddenly all automation data is gone. GRR!!!
    22. Several times I have opened Kontakt, and attempted to load an instrument while outputting a movie via firewire video to my monitor. As soon as I try to load the instrument, the firewire video output on my monitor goes crazy, and then comes back on.. Logic then crashes. This has happened 3 times randomly...
    23. UNDO does not work on every function. for example, if you change an output to bus 1 instead of 1-2, you cannot undo this. Undo should undo whatever the last command was, no matter what it was. This is what the word LOGICal is supposed to represent.
    24. Floating windows (as in plugin windows) should close with apple-w!!!
    25. *BUG* If you are in a part that is say 10 measures long, zoom in horizontally 100% in the matrix window-- You then isolate one specific quarter note pitch in the middle of this measure, and have cycle turned on, looping over this one quarter note, if you are not looking at this note event/loop region when you hit play, the display will jump to the beginning of the part and never show you this note event as it loops. However if you have the note event on screen when you hit play, then it will behave properly. This makes it extremely difficult and frustrating to perform detailed hyper-draw work. (SEE VIDEO)
    WATCH VIDEO OF THIS BUG:
    http://collinatorstudios.com/www/logicbugs/logicloopbug.mov
    26. *BUG* Host Automation is not accurate. I assigned Kontakt's tune knob to C#000, and If I place a dip, the knob begins to move way before the automation data is even present.... So basically what I was trying to do, can't even be accomplished because Logic screws everything up by pitching the instrument too early... Such a shame.. By the way, I previously mentioned the importance of being able to display part data in the arrange window as matrix data (horizontal lines) rather than score data. Someone argued what good this would do-- Well this is a perfect example, if I am attempting to affect a particular section of a note with automation, I can't possible visually see where this is because the length is not described by the current score representation. Having a horizontal representation would solve this problem... (SEE VIDEO)
    WATCH VIDEO OF THIS BUG:
    http://collinatorstudios.com/www/logicbugs/logicctrlchngbug.mov
    27. There should be a way to convert stereo samples to mono in the sample editor.
    28. When you view "as text" in the environmentt, you cannot drag an object to the arrange window-- Such as to create a bus track.. Now mind you I don't know why you can't just select "BUS" when editing a track in the arrange window in the first place, however there is no reason why 'view as text' should behave differently than when it's viewed as icons.
    29. When you drag a bus from the environment to the arrange window, it replaces whatever track was there. It should ADD a track instead of replace-- atleast there should be a preference for how this behaves.
    30. Occasionally when dragging a bus from the environment, there is some visual garbage in the track automation (see screenshot).
    31. There should be a way to LOAD and SAVE selections in the arrange window. Quite often when editing audio from a countless number of parts/regions, it becomes painful when you have to select and move 100s of audio files. There should be a way that you can just select a ton of regions and save that selection, and reload it at anytime. There are a few 'select' tools/options under the edit window, however they are song specific-- not track specific. So they are completely usesless for what I need.
    32. Logic should offer a feature to collect sysex data from midi devices so that patch names show up and can be selected via program change.
    33. When no track or part is selected, and you vertically zoom in, Logic should zoom into the center most track.. It behaves very oddly and zooms in more towards the top. This becomes extremely annoying when dealing with a sequence involving 100 tracks, and a part is selected but you scroll far below where the part is.. When you begin to zoom in, it takes you towards the selected part, yet it's not displayed on the screen and you have no reference for what you are even looking at. The rule should be this: If the part is on the screen, zooming vertically will bring you to it. If it's off the screen, you will zoom into the center track of whatever is currently on the screen.
    34. I mentioned this in a thread earlier... http://discussions.apple.com/thread.jspa?threadID=752485&tstart=0
    There is a bug when using the transform tool involving the 'position' variable. In my example, I was attempting to reverse the time placement of three chords, that occured in a part somewhere in the middle of my song. By selecting the measure start and end of this part, Logic was unable to select or operate with the transform tool (and I tried a variety of transform options). If I moved this part to the beginning of the song, then the transform tool would suddenly work. After some research, I found online someone had said "Position Time position of the event, referenced to the start of the MIDI Region (not of the song)."--- But if I still doubt this is true, because I then placed the part on a new track with no other data, and placed it in the middle of the sequence and in the transform tool under position I selected '1 1 1 1' to '5 5 5 5' as well i tried setting the position to 'all', and none of this worked. This obviously is a bug... If it's not then it's a very serious design flaw. The position should relate to measure numbers of a song, and nothing else.
    WATCH VIDEO OF THIS BUG:
    http://collinatorstudios.com/video/transform.mov
    That is all for now...
    For those who firmly agree with me and all of the points that I have brought up now and in the past, I encourage you to contact Peggie Louie, (the Logic HR department contact) at (408) 996-1010 and suggest that she hire me as a consultant to help eliminate Logic's many annoyances. I have tried to pursue this heavily in the past, but sadly I was completely ignored by her on all levels. Maybe you all can help make a difference?
    Fighting the good fight,
    Patrick J. Collins
    http://collinatorstudios.com

    11. Changing the movie's start time is very user
    unfriendly. There should be a simple way to specify
    to start at a moment of time relative to SMPTE-- So
    you can just say "+9:15" for example, and it would
    take you in 9 minutes and 15 seconds, rather than how
    it is now where you have to think backwards from
    SMPTE code and subtract.
    For this one I'd suggest getting SMPTE calculator. Entering timecode numbers and having to add and subtract is not so difficult, and AFAIC part of a composer's gig. But what I would add, instead, is that it would be fantastic if Logic provided a timecode calculator (edit: even if it was in the form of a custom Logic widget).
    13. Saving a song with a movie open should mean that
    when you load that song, the movie should be up and
    exactly as it was prior to saving. As it is now you
    have to select "open movie again".
    This doesn't always happen. I've struggled with this for a long time, and I don't know why sometimes the movie will load and not other times. I would also add here that Logic should show the file pathname to the movie. Somewhere...
    18. clicking on a track selects ALL parts. This is
    so so so annoying.
    You can prevent this from happening if you have cycle turned on and set to a set of locators that "contain" the parts you might want to select en masse. I always work with cycle=on so this is not a problem.
    21. If you have multiple tracks of the same track
    (such as three Audio track #1's)-- say you are
    recording guitar parts, and just copying the track
    and muting the previous track as a method of
    maintaining multiple takes for later auditioning. If
    you draw automation volume data on this track (it
    appears on all 3 tracks), and then if you delete the
    audio from one of the muted tracks and tell logic to
    KEEP it, suddenly all automation data is gone.
    GRR!!!
    Never had that happen. In my experience, telling Logic to keep the data always works.
    23. UNDO does not work on every function. for
    example, if you change an output to bus 1 instead of
    1-2, you cannot undo this. Undo should undo whatever
    the last command was, no matter what it was. This is
    what the word LOGICal is supposed to represent.
    Undo in Logic is highly problematic for other reasons. Here, I think there should be a specific Environment Undo, just like there's a separate undo for audio edits.
    29. When you drag a bus from the environment to the
    arrange window, it replaces whatever track was there.
    It should ADD a track instead of replace-- atleast
    there should be a preference for how this behaves.
    Right. This is a matter of personal preference. But still there are other ways to get an object assigned to a track. The "thru tool", for instance. No dragging required.
    32. Logic should offer a feature to collect sysex
    data from midi devices so that patch names show up
    and can be selected via program change.
    My guess: considering how much sheer time it takes to write this kind of software, let alone debug it with every conceivable device, it's not likely this is going to happen.
    That is all for now...
    For those who firmly agree with me and all of the
    points that I have brought up now and in the past, I
    encourage you to contact Peggie Louie, (the Logic HR
    department contact) at (408) 996-1010 and suggest
    that she hire me as a consultant to help eliminate
    Logic's many annoyances. I have tried to pursue this
    heavily in the past, but sadly I was completely
    ignored by her on all levels. Maybe you all can help
    make a difference?
    Wait in line buddy!
    (LOL)
    I must say, I'm very impressed with your list and attention to detail. And I feel your pain, trust me. But many of the things you've listed are feature requests and not bugs. And some of the behaviors you've described I have yet to run across. So this is typical with Logic, that it can be operated in so many diverse ways that no two people run it in the same way, nor would two people conceive the program's capabilities in the same way. But I digress...
    I also think there's a certain amount of Logic convention that I don't think you've adopted yet, hence your wish for behaviors that don't yet exist.
    I don't disagree with most of your feature requests, and I'm (quite unfortunately) able to say that I'm familiar with most of these bugs and about 9 dozen more. But again, it's important to distinguish between bug, feature request, time to RTFM, and errant behavior that's experienced by a very limited number of users.
    There's no doubt that this program has its problems. In particular, your #1 re the playback buffer. And I'm glad you've brought many of the bugs into the light for people to read. Good work.

  • Problems with shutdown, expose and window switching

    Hi there,
    Recently I've been having a few issues with OS X. First of all it wasn't shutting down properly -- the menu bar would disappear and it would look like it was going to shutdown, but it never did. I could move down to the dock (on auto-hide) and it would re-appear, at which point I can bring up a terminal window and use 'shutdown' to do the job. On startup I'd reset the PRAM, and then do a disk-check, but the problem keeps coming back.
    Subsequently, I've also been having problems with expose and switching windows (i.e. command-tab). Namely, neither of them work. Expose won't fire from either hot corners or the keyboard, and if I re-launch the app from the Apps folder (without trying to kill it first, I should say), it does nothing. Cmd-tab gets interpreted as just tab, and the keyboard shortcut for dashboard also fails (although I can start the dashboard from the dock).
    I read in another post about an invalid jpeg in the downloads folder being able to cause the Expose problem (seems like a most unlikely bug?). Anyway, I cleared all pictures from my downloads folder and functionality came back, but now it's gone again. It's really very frustrating as it makes moving between windows a lot more hassle.
    Any thoughts would be gratefully received.
    TIA,
    Mat

    This sounds interesting.
    Can you post a copy for the rest of us to see?
    As for actually helping you, and not just satisfying our curiousity, if you start cutting pieces of the code you will probably end up finding the source of the problem (and we won't have too big a program to handle). Since DSC is a likely suspect, you may want to start there.
    Also, are you creating an installer and using that to install? If not, you may wish to try that.
    Try to take over the world!

  • Problems with .ARW files and auto toning

    problems with .ARW files and auto toning
    let me try to explain this because this has happened in past and never found a way to resolve but i lived with it
    now that I have a Sony A7R the problem is more serious
    Firstly i take pride it making the picture happen all in camera, i use DRO lvl 5 to get enough light, like when i'm shooting at dusk. DRO its like doing HDR but in a single file, it lightens the darks. in my camera i'm happy with results
    but when I upload them to lightroom, they come out near black.
    allow me to explain
    lets say I import 100 images
    i double check my preferences and everything is UNCHECKED when it comes to importing options, there is no auto toning, nothing.
    as the images import i see a preview in the thumbnail which looks fine.
    i double click on one to enlarge it, hence leave grid view.
    for a brief 1 or 2 seconds, i see the full image in all its glory but than lightroom does something funny, it darkens the image
    one by one as it inspects each image, if it was a DRO image it makes it too dark.
    to make this clear, the image is perfect as it was in the beginning but after a few seconds lightroom for some reason thinks it needs to correct it.
    how to prevent lightroom from doing this, i want the image exactly as it is, why must lightroom apply a correction>?
    i think it has to do something with interpreting the raw file and lightroom applies its own algorithm.
    but here is what i dont get.....before lightroom makes the change i'm able to witness the picture exactly as it was taken and want it unchanged..
    now i have to tweak each file or find a profile for it which is added work.
    any ideas how to prevent lightroom from ruining my images and just leave them as they were when first detected...
    there are 2 phases...one is when it originally imports and they look fine
    second is scanning each image and applying some kind of toning which darkens it too much.
    thanks for the help

    sorry thats the auto reply message from yahoo email.
    i've disabled it now
    thing is, there is no DRO jpg to download from the camera
    its only ARW. so my understanding is when i use DRO setting, the camera makes changes to the ARW than lightroom somehow reads this from the ARW.
    but then sadly reverts it to no DRO settings.
    because i notice if i take normal picture in raw mode its dark but if i apply dro to it, it comes out brighter, yet when i d/l the image from camera to lightroom, which is an ARW - there are no jpgs. lightroom decides to mess it up
    so in reality there is no point in using DRO because when i upload it lightroom removes it.
    is there a way to tell lightroom to preserve the jpg preview as it first sees it.
    its just lame, picture appears perfect...than lightroom does something, than bam, its ruined,.
    what do i need to do to prevent lightroom from ruining the image? if it was good in the first place.

  • Problem with htmldb 2 (Sorry APEX)!

    I installed htmldb 2 on a windows XP, Oracle 10gR1 (which has enhanced by companion CD downloaded form Oracle's site). Everything went OK but when I want to connect to it by this url: http://localhost:7777/pls/htmldb it takes my username,pass but says:
    "Service Temporarily Unavailable
    The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later.
    Oracle-HTTP-Server/1.3.28 Server at localhost Port 7777"
    I noticed many differences between my installed Apache and documents of htmldb. I run a 9.0.4.0.0 Apache server and the dads.conf and httpd.conf are as following:
    # ============================================================================
    # mod_plsql DAD Configuration File
    # ============================================================================
    # 1. Please refer to dads.README for a description of this file
    # ============================================================================
    # Note: This file should typically be included in your plsql.conf file with
    # the "include" directive.
    # Hint: You can look at some sample DADs in the dads.README file
    # ============================================================================
    Alias /i/ "E:\oracle\product\10.1.0\Companion\Apache\Apache\images/"
    <Location /pls/htmldb>
    SetHandler pls_handler
    Order deny,allow
    Allow from all
    AllowOverride None
    PlsqlDatabaseUsername HTMLDB_PUBLIC_USER     
    PlsqlDatabasePassword @BI+fAonVS+7xU8G04irVINWznM6s+A9fuQ==
    PlsqlDatabaseConnectString chagh
    PlsqlDefaultPage htmldb
    PlsqlDocumentTablename wwv_flow_file_objects$
    PlsqlDocumentPath docs
    PlsqlDocumentProcedure wwv_flow_file_mgr.process_download
    PlsqlAuthenticationMode Basic
    PlsqlNLSLanguage AMERICAN_AMERICA.AL32UTF8
    </Location>
    # Based upon the NCSA server configuration files originally by Rob McCool.
    # This is the main Apache server configuration file. It contains the
    # configuration directives that give the server its instructions.
    # See <URL:http://www.apache.org/docs/> for detailed information about
    # the directives.
    # Do NOT simply read the instructions in here without understanding
    # what they do. They're here only as hints or reminders. If you are unsure
    # consult the online docs. You have been warned.
    # After this file is processed, the server will look for and process
    # E:\oracle\product\10.1.0\Companion\Apache\Apache/conf/srm.conf and then E:\oracle\product\10.1.0\Companion\Apache\Apache/conf/access.conf
    # unless you have overridden these with ResourceConfig and/or
    # AccessConfig directives here.
    # The configuration directives are grouped into three basic sections:
    # 1. Directives that control the operation of the Apache server process as a
    # whole (the 'global environment').
    # 2. Directives that define the parameters of the 'main' or 'default' server,
    # which responds to requests that aren't handled by a virtual host.
    # These directives also provide default values for the settings
    # of all virtual hosts.
    # 3. Settings for virtual hosts, which allow Web requests to be sent to
    # different IP addresses or hostnames and have them handled by the
    # same Apache server process.
    # Configuration and logfile names: If the filenames you specify for many
    # of the server's control files begin with "/" (or "drive:/" for Win32), the
    # server will use that explicit path. If the filenames do not begin
    # with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
    # with ServerRoot set to "E:\oracle\product\10.1.0\Companion\Apache\Apache" will be interpreted by the
    # server as "E:\oracle\product\10.1.0\Companion\Apache\Apache/logs/foo.log".
    # NOTE: Where filenames are specified, you must use forward slashes
    # instead of backslashes (e.g., "c:/apache" instead of "c:\apache").
    # If a drive letter is omitted, the drive on which Apache.exe is located
    # will be used by default. It is recommended that you always supply
    # an explicit drive letter in absolute paths, however, to avoid
    # confusion.
    ### Section 1: Global Environment
    # The directives in this section affect the overall operation of Apache,
    # such as the number of concurrent requests it can handle or where it
    # can find its configuration files.
    # ServerType is either inetd, or standalone. Inetd mode is only supported on
    # Unix platforms.
    ServerType standalone
    # ServerRoot: The top of the directory tree under which the server's
    # configuration, error, and log files are kept.
    # Do NOT add a slash at the end of the directory path.
    ServerRoot "E:\oracle\product\10.1.0\Companion\Apache\Apache"
    # PidFile: The file in which the server should record its process
    # identification number when it starts.
    PidFile logs/httpd.pid
    # ScoreBoardFile: File used to store internal server process information.
    # Not all architectures require this. But if yours does (you'll know because
    # this file will be created when you run Apache) then you must ensure that
    # no two invocations of Apache share the same scoreboard file.
    ScoreBoardFile logs/httpd.scoreboard
    # In the standard configuration, the server will process httpd.conf (this
    # file, specified by the -f command line option), srm.conf, and access.conf
    # in that order. The latter two files are now distributed empty, as it is
    # recommended that all directives be kept in a single file for simplicity.
    # The commented-out values below are the built-in defaults. You can have the
    # server ignore these files altogether by using "/dev/null" (for Unix) or
    # "nul" (for Win32) for the arguments to the directives.
    #ResourceConfig conf/srm.conf
    #AccessConfig conf/access.conf
    # Timeout: The number of seconds before receives and sends time out.
    Timeout 300
    # SendBufferSize: controls setsockopt() call made to set send buffer size on
    # all sockets. Default OS value on most Windows platforms is too small.
    # Larger values can help if the average page size served by OHS is
    # large (~64 k)
    SendBufferSize 16384
    # KeepAlive: Whether or not to allow persistent connections (more than
    # one request per connection). Set to "Off" to deactivate.
    KeepAlive On
    # MaxKeepAliveRequests: The maximum number of requests to allow
    # during a persistent connection. Set to 0 to allow an unlimited amount.
    # We recommend you leave this number high, for maximum performance.
    MaxKeepAliveRequests 100
    # KeepAliveTimeout: Number of seconds to wait for the next request from the
    # same client on the same connection.
    KeepAliveTimeout 15
    # Apache on Win32 always creates one child process to handle requests. If it
    # dies, another child process is created automatically. Within the child
    # process multiple threads handle incoming requests. The next two
    # directives control the behaviour of the threads and processes.
    # MaxRequestsPerChild: the number of requests each child process is
    # allowed to process before the child dies. The child will exit so
    # as to avoid problems after prolonged use when Apache (and maybe the
    # libraries it uses) leak memory or other resources. On most systems, this
    # isn't really needed, but a few (such as Solaris) do have notable leaks
    # in the libraries. For Win32, set this value to zero (unlimited)
    # unless advised otherwise.
    # NOTE: This value does not include keepalive requests after the initial
    # request per connection. For example, if a child process handles
    # an initial request and 10 subsequent "keptalive" requests, it
    # would only count as 1 request towards this limit.
    MaxRequestsPerChild 0
    # Number of concurrent threads (i.e., requests) the server will allow.
    # Set this value according to the responsiveness of the server (more
    # requests active at once means they're all handled more slowly) and
    # the amount of system resources you'll allow the server to consume.
    ThreadsPerChild 50
    # Server-pool size regulation. Rather than making you guess how many
    # server processes you need, Apache dynamically adapts to the load it
    # sees --- that is, it tries to maintain enough server processes to
    # handle the current load, plus a few spare servers to handle transient
    # load spikes (e.g., multiple simultaneous requests from a single
    # Netscape browser).
    # It does this by periodically checking how many servers are waiting
    # for a request. If there are fewer than MinSpareServers, it creates
    # a new spare. If there are more than MaxSpareServers, some of the
    # spares die off. The default values are probably OK for most sites.
    #MinSpareServers 5
    #MaxSpareServers 20
    # Limit on total number of servers running, i.e., limit on the number
    # of clients who can simultaneously connect --- if this limit is ever
    # reached, clients will be LOCKED OUT, so it should NOT BE SET TOO LOW.
    # It is intended mainly as a brake to keep a runaway server from taking
    # the system with it as it spirals down...
    #MaxClients 150
    # Listen: Allows you to bind Apache to specific IP addresses and/or
    # ports, in addition to the default. See also the <VirtualHost>
    # directive.
    #Listen 3000
    #Listen 12.34.56.78:80
    # BindAddress: You can support virtual hosts with this option. This directive
    # is used to tell the server which IP address to listen to. It can either
    # contain "*", an IP address, or a fully qualified Internet domain name.
    # See also the <VirtualHost> and Listen directives.
    #BindAddress *
    # Dynamic Shared Object (DSO) Support
    # To be able to use the functionality of a module which was built as a DSO you
    # have to place corresponding `LoadModule' lines at this location so the
    # directives contained in it are actually available before they are used.
    # Please read the file README.DSO in the Apache 1.3 distribution for more
    # details about the DSO mechanism and run `apache -l' for the list of already
    # built-in (statically linked and thus always available) modules in your Apache
    # binary.
    # Note: The order in which modules are loaded is important. Don't change
    # the order below without expert advice.
    # Example:
    # LoadModule foo_module libexec/mod_foo.dll
    LoadModule mime_magic_module      modules/ApacheModuleMimeMagic.dll
    LoadModule mime_module          modules/ApacheModuleMime.dll
    LoadModule dbm_auth_module     modules/ApacheModuleAuthDBM.dll
    LoadModule digest_auth_module     modules/ApacheModuleAuthDigest.dll
    LoadModule anon_auth_module      modules/ApacheModuleAuthAnon.dll
    LoadModule cern_meta_module      modules/ApacheModuleCERNMeta.dll
    LoadModule digest_module      modules/ApacheModuleDigest.dll
    LoadModule expires_module      modules/ApacheModuleExpires.dll
    LoadModule headers_module      modules/ApacheModuleHeaders.dll
    LoadModule proxy_module      modules/ApacheModuleProxy.dll
    LoadModule speling_module      modules/ApacheModuleSpeling.dll
    LoadModule status_module      modules/ApacheModuleStatus.dll
    LoadModule info_module          modules/ApacheModuleInfo.dll
    LoadModule usertrack_module      modules/ApacheModuleUserTrack.dll
    LoadModule vhost_alias_module     modules/ApacheModuleVhostAlias.dll
    LoadModule agent_log_module     modules/ApacheModuleLogAgent.dll
    LoadModule referer_log_module     modules/ApacheModuleLogReferer.dll
    LoadModule perl_module      modules/ApacheModulePerl.DLL
    LoadModule fastcgi_module      modules/ApacheModuleFastCGI.dll
    LoadModule onsint_module      modules/ApacheModuleOnsint.dll
    LoadModule wchandshake_module     modules/ApacheModuleWchandshake.dll
    ClearModuleList
    AddModule mod_so.c
    AddModule mod_onsint.c
    AddModule mod_mime_magic.c
    AddModule mod_mime.c
    AddModule mod_access.c
    AddModule mod_auth.c
    AddModule mod_negotiation.c
    AddModule mod_include.c
    AddModule mod_autoindex.c
    AddModule mod_dir.c
    AddModule mod_cgi.c
    AddModule mod_userdir.c
    AddModule mod_alias.c
    AddModule mod_env.c
    AddModule mod_log_config.c
    AddModule mod_asis.c
    AddModule mod_imap.c
    AddModule mod_actions.c
    AddModule mod_setenvif.c
    AddModule mod_isapi.c
    AddModule mod_vhost_alias.c
    AddModule mod_log_referer.c
    AddModule mod_log_agent.c
    AddModule mod_auth_anon.c
    AddModule mod_auth_dbm.c
    AddModule mod_auth_digest.c
    AddModule mod_cern_meta.c
    AddModule mod_digest.c
    AddModule mod_expires.c
    AddModule mod_headers.c
    AddModule mod_proxy.c
    AddModule mod_speling.c
    AddModule mod_info.c
    AddModule mod_status.c
    AddModule mod_usertrack.c
    AddModule mod_perl.c
    AddModule mod_fastcgi.c
    AddModule mod_wchandshake.c
    <IfDefine SSL>
    LoadModule ossl_module      modules/ApacheModuleOSSL.DLL
    </IfDefine>
    # ExtendedStatus controls whether Apache will generate "full" status
    # information (ExtendedStatus On) or just basic information (ExtendedStatus
    # Off) when the "server-status" handler is called. The default is Off.
    ExtendedStatus On
    ### Section 2: 'Main' server configuration
    # The directives in this section set up the values used by the 'main'
    # server, which responds to any requests that aren't handled by a
    # <VirtualHost> definition. These values also provide defaults for
    # any <VirtualHost> containers you may define later in the file.
    # All of these directives may appear inside <VirtualHost> containers,
    # in which case these default settings will be overridden for the
    # virtual host being defined.
    # Port: The port to which the standalone server listens. Certain firewall
    # products must be configured before Apache can listen to a specific port.
    # Other running httpd servers will also interfere with this port. Disable
    # all firewall, security, and other services if you encounter problems.
    # To help diagnose problems use the Windows NT command NETSTAT -a
    Port 7777
    Listen 7777
    # ServerAdmin: Your address, where problems with the server should be
    # e-mailed. This address appears on some server-generated pages, such
    # as error documents.
    ServerAdmin [email protected]
    # ServerName allows you to set a host name which is sent back to clients for
    # your server if it's different than the one the program would get (i.e., use
    # "www" instead of the host's real name).
    # Note: You cannot just invent host names and hope they work. The name you
    # define here must be a valid DNS name for your host. If you don't understand
    # this, ask your network administrator.
    # If your host doesn't have a registered DNS name, enter its IP address here.
    # You will have to access it by its address (e.g., http://123.45.67.89/)
    # anyway, and this will make redirections work in a sensible way.
    # 127.0.0.1 is the TCP/IP local loop-back address, often named localhost. Your
    # machine always knows itself by this address. If you use Apache strictly for
    # local testing and development, you may use 127.0.0.1 as the server name.
    ServerName localhost
    # DocumentRoot: The directory out of which you will serve your
    # documents. By default, all requests are taken from this directory, but
    # symbolic links and aliases may be used to point to other locations.
    DocumentRoot "E:\oracle\product\10.1.0\Companion\Apache\Apache\htdocs"
    # Each directory to which Apache has access, can be configured with respect
    # to which services and features are allowed and/or disabled in that
    # directory (and its subdirectories).
    # First, we configure the "default" to be a very restrictive set of
    # permissions.
    <Directory />
    Options FollowSymLinks
    AllowOverride None
    </Directory>
    # Note that from this point forward you must specifically allow
    # particular features to be enabled - so if something's not working as
    # you might expect, make sure that you have specifically enabled it
    # below.
    # This should be changed to whatever you set DocumentRoot to.
    <Directory "E:\oracle\product\10.1.0\Companion\Apache\Apache\htdocs">
    # This may also be "None", "All", or any combination of "Indexes",
    # "Includes", "FollowSymLinks", "ExecCGI", or "MultiViews".
    # Note that "MultiViews" must be named explicitly --- "Options All"
    # doesn't give it to you.
    Options Indexes FollowSymLinks MultiViews
    # This controls which options the .htaccess files in directories can
    # override. Can also be "All", or any combination of "Options", "FileInfo",
    # "AuthConfig", and "Limit"
    AllowOverride None
    # Controls who can get stuff from this server.
    Order allow,deny
    Allow from all
    </Directory>
    # UserDir: The name of the directory which is appended onto a user's home
    # directory if a ~user request is received.
    # Under Win32, we do not currently try to determine the home directory of
    # a Windows login, so a format such as that below needs to be used. See
    # the UserDir documentation for details.
    <IfModule mod_userdir.c>
         UserDir "E:\oracle\product\10.1.0\Companion\Apache\Apache\users\"
    </IfModule>
    # Control access to UserDir directories. The following is an example
    # for a site where these directories are restricted to read-only.
    #<Directory /home/*/public_html>
    # AllowOverride FileInfo AuthConfig Limit
    # Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
    # <Limit GET POST OPTIONS PROPFIND>
    # Order allow,deny
    # Allow from all
    # </Limit>
    # <LimitExcept GET POST OPTIONS PROPFIND>
    # Order deny,allow
    # Deny from all
    # </LimitExcept>
    #</Directory>
    # DirectoryIndex: Name of the file or files to use as a pre-written HTML
    # directory index. Separate multiple entries with spaces.
    <IfModule mod_dir.c>
    DirectoryIndex index.html
    </IfModule>
    # AccessFileName: The name of the file to look for in each directory
    # for access control information.
    AccessFileName .htaccess
    # The following lines prevent .htaccess files from being viewed by
    # Web clients. Since .htaccess files often contain authorization
    # information, access is disallowed for security reasons. Comment
    # these lines out if you want Web visitors to see the contents of
    # .htaccess files. If you change the AccessFileName directive above,
    # be sure to make the corresponding changes here.
    # Also, folks tend to use names such as .htpasswd for password
    # files, so this will protect those as well.
    <Files ~ "^\.ht">
    Order allow,deny
    Deny from all
    </Files>
    # CacheNegotiatedDocs: By default, Apache sends "Pragma: no-cache" with each
    # document that was negotiated on the basis of content. This asks proxy
    # servers not to cache the document. Uncommenting the following line disables
    # this behavior, and proxies will be allowed to cache the documents.
    #CacheNegotiatedDocs
    # UseCanonicalName: (new for 1.3) With this setting turned on, whenever
    # Apache needs to construct a self-referencing URL (a URL that refers back
    # to the server the response is coming from) it will use ServerName and
    # Port to form a "canonical" name. With this setting off, Apache will
    # use the hostname:port that the client supplied, when possible. This
    # also affects SERVER_NAME and SERVER_PORT in CGI scripts.
    UseCanonicalName On
    # TypesConfig describes where the mime.types file (or equivalent) is
    # to be found.
    <IfModule mod_mime.c>
    TypesConfig conf/mime.types
    </IfModule>
    # DefaultType is the default MIME type the server will use for a document
    # if it cannot otherwise determine one, such as from filename extensions.
    # If your server contains mostly text or HTML documents, "text/plain" is
    # a good value. If most of your content is binary, such as applications
    # or images, you may want to use "application/octet-stream" instead to
    # keep browsers from trying to display binary files as though they are
    # text.
    DefaultType text/plain
    # The mod_mime_magic module allows the server to use various hints from the
    # contents of the file itself to determine its type. The MIMEMagicFile
    # directive tells the module where the hint definitions are located.
    # mod_mime_magic is not part of the default server (you have to add
    # it yourself with a LoadModule [see the DSO paragraph in the 'Global
    # Environment' section], or recompile the server and include mod_mime_magic
    # as part of the configuration), so it's enclosed in an <IfModule> container.
    # This means that the MIMEMagicFile directive will only be processed if the
    # module is part of the server.
    <IfModule mod_mime_magic.c>
    MIMEMagicFile conf/magic
    </IfModule>
    # HostnameLookups: Log the names of clients or just their IP addresses
    # e.g., www.apache.org (on) or 204.62.129.132 (off).
    # The default is off because it'd be overall better for the net if people
    # had to knowingly turn this feature on, since enabling it means that
    # each client request will result in AT LEAST one lookup request to the
    # nameserver.
    HostnameLookups Off
    # ErrorLog: The location of the error log file.
    # If you do not specify an ErrorLog directive within a <VirtualHost>
    # container, error messages relating to that virtual host will be
    # logged here. If you do define an error logfile for a <VirtualHost>
    # container, that host's errors will be logged there and not here.
    ErrorLog "|E:\oracle\product\10.1.0\Companion\Apache\Apache\bin\rotatelogs logs/error_log 43200"
    # LogLevel: Control the number of messages logged to the error.log.
    # Possible values include: debug, info, notice, warn, error, crit,
    # alert, emerg.
    LogLevel warn
    # The following directives define some format nicknames for use with
    # a CustomLog directive (see below).
    # Alternate "common" format to use when fronted by webcache:
    # LogFormat "%{ClientIP}i %l %u %t \"%r\" %>s %b %h" common_webcache
    # When webcache is forwarding requests to OHS, %h becomes the IP of
    # the originating webcache server and the real client IP is stored
    # in the ClientIP header. The common_webcache format can be used
    # in place of the common format when using webcache but with one
    # important caveat: if clients are capable of bypassing webcache
    # then it is possible to spoof the client IP by manually setting
    # the ClientIP header so the %h field should be monitored in such
    # an environment. Another alternative to specifying the ClientIP
    # header directly in a LogFormat is to use the "UseWebCacheIp"
    # directive:
    # UseWebCacheIp On
    # When this is specified, %h is derived internally from the ClientIP
    # header and the access log format does not need to be modified.
    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
    LogFormat "%h %l %u %t \"%r\" %>s %b" common
    LogFormat "%{Referer}i -> %U" referer
    LogFormat "%{User-agent}i" agent
    # The location and format of the access logfile (Common Logfile Format).
    # If you do not define any access logfiles within a <VirtualHost>
    # container, they will be logged here. Contrariwise, if you do
    # define per-<VirtualHost> access logfiles, transactions will be
    # logged therein and not in this file.
    CustomLog "|E:\oracle\product\10.1.0\Companion\Apache\Apache\bin\rotatelogs logs/access_log 43200" common
    # If you would like to have agent and referer logfiles, uncomment the
    # following directives.
    #CustomLog logs/referer.log referer
    #CustomLog logs/agent.log agent
    # If you prefer a single logfile with access, agent, and referer information
    # (Combined Logfile Format) you can use the following directive.
    #CustomLog logs/access.log combined
    # Optionally add a line containing the server version and virtual host
    # name to server-generated pages (error documents, FTP directory listings,
    # mod_status and mod_info output etc., but not CGI generated documents).
    # Set to "EMail" to also include a mailto: link to the ServerAdmin.
    # Set to one of: On | Off | EMail
    ServerSignature On
    # Apache parses all CGI scripts for the shebang line by default.
    # This comment line, the first line of the script, consists of the symbols
    # pound (#) and exclamation (!) followed by the path of the program that
    # can execute this specific script. For a perl script, with perl.exe in
    # the C:\Program Files\Perl directory, the shebang line should be:
    #!c:/program files/perl/perl
    # Note you mustnot_ indent the actual shebang line, and it must be the
    # first line of the file. Of course, CGI processing must be enabled by
    # the appropriate ScriptAlias or Options ExecCGI directives for the files
    # or directory in question.
    # However, Apache on Windows allows either the Unix behavior above, or can
    # use the Registry to match files by extention. The command to execute
    # a file of this type is retrieved from the registry by the same method as
    # the Windows Explorer would use to handle double-clicking on a file.
    # These script actions can be configured from the Windows Explorer View menu,
    # 'Folder Options', and reviewing the 'File Types' tab. Clicking the Edit
    # button allows you to modify the Actions, of which Apache 1.3 attempts to
    # perform the 'Open' Action, and failing that it will try the shebang line.
    # This behavior is subject to change in Apache release 2.0.
    # Each mechanism has it's own specific security weaknesses, from the means
    # to run a program you didn't intend the website owner to invoke, and the
    # best method is a matter of great debate.
    # To enable the this Windows specific behavior (and therefore -disable- the
    # equivilant Unix behavior), uncomment the following directive:
    #ScriptInterpreterSource registry
    # The directive above can be placed in individual <Directory> blocks or the
    # .htaccess file, with either the 'registry' (Windows behavior) or 'script'
    # (Unix behavior) option, and will override this server default option.
    # Aliases: Add here as many aliases as you need (with no limit). The format is
    # Alias fakename realname
    <IfModule mod_alias.c>
    # Note that if you include a trailing / on fakename then the server will
    # require it to be present in the URL. So "/icons" isn't aliased in this
    # example, only "/icons/"..
    Alias /jservdocs/ "E:\oracle\product\10.1.0\Companion\Apache\Jserv\docs/"
    Alias /javacachedocs/ "E:\oracle\product\10.1.0\Companion\javacache\javadoc/"
    Alias /icons/ "E:\oracle\product\10.1.0\Companion\Apache\Apache\icons/"
    Alias /i/ "E:\oracle\product\10.1.0\Companion\Apache\Apache\images/"
    <Directory "icons">
    Options Indexes MultiViews
    AllowOverride None
    Order allow,deny
    Allow from all
    </Directory>
    <IfModule mod_perl.c>
         Alias /perl/ "E:\oracle\product\10.1.0\Companion\Apache\Apache/cgi-bin/"
    </IfModule>
    # ScriptAlias: This controls which directories contain server scripts.
    # ScriptAliases are essentially the same as Aliases, except that
    # documents in the realname directory are treated as applications and
    # run by the server when requested rather than as documents sent to the client.
    # The same rules about trailing "/" apply to ScriptAlias directives as to
    # Alias.
    ScriptAlias /cgi-bin/ "E:\oracle\product\10.1.0\Companion\Apache\Apache\cgi-bin/"
    # "E:\oracle\product\10.1.0\Companion\Apache\Apache/cgi-bin" should be changed to whatever your ScriptAliased
    # CGI directory exists, if you have that configured.
    <Directory "E:\oracle\product\10.1.0\Companion\Apache\Apache\cgi-bin">
    AllowOverride None
    Options None
    Order allow,deny
    Allow from all
    </Directory>
    </IfModule>
    # End of aliases.
    # Redirect allows you to tell clients about documents which used to exist in
    # your server's namespace, but do not anymore. This allows you to tell the
    # clients where to look for the relocated document.
    # Format: Redirect old-URI new-URL
    # Directives controlling the display of server-generated directory listings.
    <IfModule mod_autoindex.c>
    # FancyIndexing is whether you want fancy directory indexing or standard
    # Note, add the option TrackModified to the IndexOptions default list only
    # if all indexed directories reside on NTFS volumes. The TrackModified flag
    # will report the Last-Modified date to assist caches and proxies to properly
    # track directory changes, but it does not work on FAT volumes.
    IndexOptions FancyIndexing
    # AddIcon* directives tell the server which icon to show for different
    # files or filename extensions. These are only displayed for
    # FancyIndexed directories.
    AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
    AddIconByType (TXT,/icons/text.gif) text/*
    AddIconByType (IMG,/icons/image2.gif) image/*
    AddIconByType (SND,/icons/sound2.gif) audio/*
    AddIconByType (VID,/icons/movie.gif) video/*
    AddIcon /icons/binary.gif .bin .exe
    AddIcon /icons/binhex.gif .hqx
    AddIcon /icons/tar.gif .tar
    AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
    AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
    AddIcon /icons/a.gif .ps .ai .eps
    AddIcon /icons/layout.gif .html .shtml .htm .pdf
    AddIcon /icons/text.gif .txt
    AddIcon /icons/c.gif .c
    AddIcon /icons/p.gif .pl .py
    AddIcon /icons/f.gif .for
    AddIcon /icons/dvi.gif .dvi
    AddIcon /icons/uuencoded.gif .uu
    AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
    AddIcon /icons/tex.gif .tex
    AddIcon /icons/bomb.gif core
    AddIcon /icons/back.gif ..
    AddIcon /icons/hand.right.gif README
    AddIcon /icons/folder.gif ^^DIRECTORY^^
    AddIcon /icons/blank.gif ^^BLANKICON^^
    # DefaultIcon is which icon to show for files which do not have an icon
    # explicitly set.
    DefaultIcon /icons/unknown.gif
    # AddDescription allows you to place a short description after a file in
    # server-generated indexes. These are only displayed for FancyIndexed
    # directories.
    # Format: AddDescription "description" filename
    #AddDescription "GZIP compressed document" .gz
    #AddDescription "tar archive" .tar
    #AddDescription "GZIP compressed tar archive" .tgz
    # ReadmeName is the name of the README file the server will look for by
    # default, and append to directory listings.
    # HeaderName is the name of a file which should be prepended to
    # directory indexes.
    # If MultiViews are amongst the Options in effect, the server will
    # first look for name.html and include it if found. If name.html
    # doesn't exist, the server will then look for name.txt and include
    # it as plaintext if found.
    ReadmeName README
    HeaderName HEADER
    # IndexIgnore is a set of filenames which directory indexing should ignore
    # and not include in the listing. Shell-style wildcarding is permitted.
    IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
    </IfModule>
    # End of indexing directives.
    # Document types.
    <IfModule mod_mime.c>
    # AddEncoding allows you to have certain browsers (Mosaic/X 2.1+) uncompress
    # information on the fly. Note: Not all browsers support this.
    # Despite the name similarity, the following Add* directives have nothing
    # to do with the FancyIndexing customization directives above.
    AddEncoding x-compress Z
    AddEncoding x-gzip gz tgz
    # AddLanguage allows you to specify the language of a document. You can
    # then use content negotiation to give a browser a file in a language
    # it can understand.
    # Note 1: The suffix does not have to be the same as the language
    # keyword --- those with documents in Polish (whose net-standard
    # language code is pl) may wish to use "AddLanguage pl .po" to
    # avoid the ambiguity with the common suffix for perl scripts.
    # Note 2: The example entries below illustrate that in quite
    # some cases the two character 'Language' abbriviation is not
    # identical to the two character 'Country' code for its country,
    # E.g. 'Danmark/dk' versus 'Danish/da'.
    # Note 3: In the case of 'ltz' we violate the RFC by using a three char
    # specifier. But there is 'work in progress' to fix this and get
    # the reference data for rfc1766 cleaned up.
    # Danish (da) - Dutch (nl) - English (en) - Estonian (ee)
    # French (fr) - German (de) - Greek-Modern (el)
    # Italian (it) - Korean (kr) - Norwegian (no)
    # Portugese (pt) - Luxembourgeois* (ltz)
    # Spanish (es) - Swedish (sv) - Catalan (ca) - Czech(cz)
    # Polish (pl) - Brazilian Portuguese (pt-br) - Japanese (ja)
    # Russian (ru)
    AddLanguage ar .ar
    AddLanguage da .dk .da
    AddLanguage nl .nl
    AddLanguage en .en
    AddLanguage et .ee
    AddLanguage fi .fi
    AddLanguage fr .fr
    AddLanguage de .de
    AddLanguage el .el
    AddLanguage es .es_ES .es
    AddLanguage he .he .iw
    AddLanguage hu .hu
    AddCharset ISO-8859-8 .iso8859-8
    AddLanguage it .it
    AddLanguage ja .ja
    AddCharset ISO-2022-JP .jis
    AddLanguage ko .ko
    AddLanguage kr .kr
    AddCharset ISO-2022-KR .iso-kr
    AddLanguage nn .nn
    AddLanguage no .no
    AddLanguage pl .po
    AddCharset ISO-8859-2 .iso-pl
    AddLanguage pt .pt
    AddLanguage pt-br .pt_BR .pt-br
    AddLanguage ltz .lu
    AddLanguage ca .ca
    AddLanguage sk .sk
    AddLanguage sv .sv
    AddLanguage th .th
    AddLanguage tr .tr
    AddLanguage cz .cz .cs
    AddLanguage ro .ro
    AddLanguage ru .ru
    AddLanguage zh-cn .zh_CN
    AddLanguage zh-tw .zh_TW
    AddCharset Big5 .Big5 .big5
    AddCharset WINDOWS-1251 .cp-1251
    AddCharset CP866 .cp866
    AddCharset ISO-8859-5 .iso-ru
    AddCharset KOI8-R .koi8-r
    AddCharset UCS-2 .ucs2
    AddCharset UCS-4 .ucs4
    AddCharset UTF-8 .utf8
    # LanguagePriority allows you to give precedence to some languages
    # in case of a tie during content negotiation.
    # Just list the languages in decreasing order of preference. We have
    # more or less alphabetized them here. You probably want to change this.
    <IfModule mod_negotiation.c>
    LanguagePriority ar en da nl et fi fr de el it ja ko kr no pl pt pt-br ro ru ltz ca es sk sv th tr zh-cn zh-tw zh-cn
    </IfModule>
    # AddType allows you to tweak mime.types without actually editing it, or to
    # make certain files to be certain types.
    # For example, the PHP 3.x module (not part of the Apache distribution - see
    # http://www.php.net) will typically use:
    #AddType application/x-httpd-php3 .php3
    #AddType application/x-httpd-php3-source .phps
    # And for PHP 4.x, use:
    #AddType application/x-httpd-php .php
    #AddType application/x-httpd-php-source .phps
    AddType application/x-tar .tgz
    # AddHandler allows you to map certain file extensions to "handlers",
    # actions unrelated to filetype. These can be either built into the server
    # or added with the Action command (see below)
    # If you want to use server side includes, or CGI outside
    # ScriptAliased directories, uncomment the following lines.
    # To use CGI scripts:
    #AddHandler cgi-script .cgi
    # To use server-parsed HTML files
    #AddType text/html .shtml
    #AddHandler server-parsed .shtml
    AddType text/xml xbl
    AddType text/x-component htc
    # Uncomment the following line to enable Apache's send-asis HTTP file
    # feature
    #AddHandler send-as-is asis
    # If you wish to use server-parsed imagemap files, use
    #AddHandler imap-file map
    # To enable type maps, you might want to use
    #AddHandler type-map var
    </IfModule>
    # End of document types.
    # Action lets you define media types that will execute a script whenever
    # a matching file is called. This eliminates the need for repeated URL
    # pathnames for oft-used CGI file processors.
    # Format: Action media/type /cgi-script/location
    # Format: Action handler-name /cgi-script/location
    # MetaDir: specifies the name of the directory in which Apache can find
    # meta information files. These files contain additional HTTP headers
    # to include when sending the document
    #MetaDir .web
    # MetaSuffix: specifies the file name suffix for the file containing the
    # meta information.
    #MetaSuffix .meta
    # Customizable error response (Apache style)
    # these come in three flavors
    # 1) plain text
    #ErrorDocument 500 "The server made a boo boo.
    # n.b. the single leading (") marks it as text, it does not get output
    # 2) local redirects
    #ErrorDocument 404 /missing.html
    # to redirect to local URL /missing.html
    #ErrorDocument 404 /cgi-bin/missing_handler.pl
    # N.B.: You can redirect to a script or a document using server-side-includes.
    # 3) external redirects
    #ErrorDocument 402 http://some.other_server.com/subscription_info.html
    # N.B.: Many of the environment variables associated with the original
    # request will not be available to such a script.
    # Customize behaviour based on the browser
    <IfModule mod_setenvif.c>
    # The following directives modify normal HTTP response behavior.
    # The first directive disables keepalive for Netscape 2.x and browsers that
    # spoof it. There are known problems with these browser implementations.
    # The second directive is for Microsoft Internet Explorer 4.0b2
    # which has a broken HTTP/1.1 implementation and does not properly
    # support keepalive when it is used on 301 or 302 (redirect) responses.
    BrowserMatch "Mozilla/2" nokeepalive
    BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0
    # The following directive disables HTTP/1.1 responses to browsers which
    # are in violation of the HTTP/1.0 spec by not being able to grok a
    # basic 1.1 response.
    BrowserMatch "RealPlayer 4\.0" force-response-1.0
    BrowserMatch "Java/1\.0" force-response-1.0
    BrowserMatch "JDK/1\.0" force-response-1.0
    </IfModule>
    # End of browser customization directives
    # Allow server status reports, with the URL of http://servername/server-status
    # Change the ".your_domain.com" to match your domain to enable.
    <Location /server-status>
    SetHandler server-status
    Order deny,allow
    Deny from all
    Allow from localhost localhost localhost
    </Location>
    # Allow remote server configuration reports, with the URL of
    # http://servername/server-info (requires that mod_info.c be loaded).
    # Change the ".your_domain.com" to match your domain to enable.
    #<Location /server-info>
    # SetHandler server-info
    # Order deny,allow
    # Deny from all
    # Allow from .your_domain.com
    #</Location>
    # There have been reports of people trying to abuse an old bug from pre-1.1
    # days. This bug involved a CGI script distributed as a part of Apache.
    # By uncommenting these lines you can redirect these attacks to a logging
    # script on phf.apache.org. Or, you can record them yourself, using the script
    # support/phf_abuse_log.cgi.
    #<Location /cgi-bin/phf*>
    # Deny from all
    # ErrorDocument 403 http://phf.apache.org/phf_abuse_log.cgi
    #</Location>
    # Proxy Server directives. Uncomment the following lines to
    # enable the proxy server:
    #<IfModule mod_proxy.c>
    # ProxyRequests On
    # <Directory proxy:*>
    # Order deny,allow
    # Deny from all
    # Allow from .your_domain.com
    # </Directory>
    # Enable/disable the handling of HTTP/1.1 "Via:" headers.
    # ("Full" adds the server version; "Block" removes all outgoing Via: headers)
    # Set to one of: Off | On | Full | Block
    # ProxyVia On
    # To enable the cache as well, edit and uncomment the following lines:
    # (no cacheing without CacheRoot)
    # CacheRoot "E:\oracle\product\10.1.0\Companion\Apache\Apache\proxy"
    # CacheSize 5
    # CacheGcInterval 4
    # CacheMaxExpire 24
    # CacheLastModifiedFactor 0.1
    # CacheDefaultExpire 1
    # NoCache a_domain.com another_domain.edu joes.garage_sale.com
    #</IfModule>
    # End of proxy directives.
    ### Section 3: Virtual Hosts
    # VirtualHost: If you want to maintain multiple domains/hostnames on your
    # machine you can setup VirtualHost containers for them. Most configurations
    # use only name-based virtual hosts so the server doesn't need to worry about
    # IP addresses. This is indicated by the asterisks in the directives below.
    # Please see the documentation at <URL:http://www.apache.org/docs/vhosts/>
    # for further details before you try to setup virtual hosts.
    # You may use the command line option '-S' to verify your virtual host
    # configuration.
    # Use name-based virtual hosting.
    #NameVirtualHost *
    #NameVirtualHost 12.34.56.78:80
    #NameVirtualHost 12.34.56.78
    # VirtualHost example:
    # Almost any Apache directive may go into a VirtualHost container.
    # The first VirtualHost section is used for requests without a known
    # server name.
    #<VirtualHost *>
    # ServerAdmin [email protected]
    # DocumentRoot /www/docs/dummy-host.example.com
    # ServerName dummy-host.example.com
    # ErrorLog logs/dummy-host.example.com-error_log
    # CustomLog logs/dummy-host.example.com-access_log common
    #</VirtualHost>
    #<VirtualHost default:*>
    #</VirtualHost>
    SetEnv PERL5LIB "E:\oracle\product\10.1.0\Companion\perl\5.6.1\lib:E:\oracle\product\10.1.0\Companion\perl\site\5.6.1\lib"
    <IfModule mod_perl.c>
    # Perl Directives
    # PerlWarn On
    # PerlFreshRestart On
    # PerlSetEnv PERL5OPT Tw
    # PerlSetEnv PERL5LIB "E:\oracle\product\10.1.0\Companion\perl\5.6.1\lib:E:\oracle\product\10.1.0\Companion\perl\site\5.6.1\lib"
    PerlModule Apache
    # PerlModule Apache::Status
    PerlModule Apache::Registry
    # PerlModule Apache::CGI
    # PerlModule Apache::DBI
    # PerlRequire
    <Location /perl>
    SetHandler perl-script
    PerlHandler Apache::Registry
    AddHandler perl-script .pl
    Options +ExecCGI
    PerlSendHeader On
    </Location>
    # <Location /perl-status>
    # SetHandler perl-script
    # PerlHandler Apache::Status
    # order deny,allow
    # deny from all
    # allow from localhost
    # </Location>
    </IfModule>
    #Protect WEB-INF directory
    <DirectoryMatch /WEB-INF/>
    Order deny,allow
    Deny from all
    </DirectoryMatch>
    # Setup of FastCGI module
    <IfModule mod_fastcgi.c>
    Alias /fastcgi/ "E:\oracle\product\10.1.0\Companion\Apache\fastcgi/"
    ScriptAlias /fcgi-bin/ "E:\oracle\product\10.1.0\Companion\Apache\Apache\fcgi-bin/"
    <Directory "E:\oracle\product\10.1.0\Companion\Apache\Apache\fcgi-bin">
         AllowOverride None
         Options None
         Order allow,deny
         Allow from all
         SetHandler fastcgi-script
         <IfModule mod_ossl.c>
         SSLOptions +StdEnvVars
         </IfModule>
    </Directory>
    </IfModule>
    # Include the configuration for Apache JServ 1.1
    #include "E:\oracle\product\10.1.0\Companion\Apache\Jserv\conf\jserv.conf"
    # Setup of oprocmgr module.
    # This directive identifies each remote apache instance that will be
    # sending requests to processes (e.g., JServs), managed by local Apache
    # instances. This directive is used by the local process manager to share
    # routing information with remote apache instances via non-SSL HTTP messages.
    # The directive is repeated for each remote apache instance that will be
    # sending requests. The ProcNode directive that refers to the local apache
    # instance will be ignored, but may be supplied to facilitate uniformity
    # in configuration across apache instances. Arguments to the ProcNode must
    # be sufficient to reach the remote instance of apache via non-SSL HTTP
    # messages. It is not considered an error if the remote apache instance is
    # unreachable, as no assumption is made about the starting order or
    # availability of apache instances.
    # Syntax: ProcNode <hostname> <port>
    # Example: ProcNode abc.com 7777
    <IfModule mod_oprocmgr.c>
    <Location /oprocmgr-service>
    SetHandler oprocmgr-service
    Order deny,allow
    Deny from all
    Allow from localhost localhost localhost
    </Location>
    <Location /oprocmgr-status>
    SetHandler oprocmgr-status
    Order deny,allow
    Deny from all
    Allow from localhost localhost localhost
    </Location>
    </IfModule>
    # Include the mod_oc4j configuration file
    include "E:\oracle\product\10.1.0\Companion\Apache\Apache\conf\mod_oc4j.conf"
    # Include the mod_dms configuration file
    include "E:\oracle\product\10.1.0\Companion\Apache\Apache\conf\dms.conf"
    # Loading rewrite_module here so it loads before mod_oc4j
    LoadModule rewrite_module      modules/ApacheModuleRewrite.dll
    # Include the SSL definitions and Virtual Host container
    include "E:\oracle\product\10.1.0\Companion\Apache\Apache\conf\ssl.conf"
    # Include the mod_osso configuration file
    #include "E:\oracle\product\10.1.0\Companion\Apache\Apache\conf\mod_osso.conf"
    # Include the Oracle configuration file for custom settings
    include "E:\oracle\product\10.1.0\Companion\Apache\Apache\conf\oracle_apache.conf"
    ------------------------------------------------------------------------------------------------------------------

    Firstly, there's no such thing as Apache 9.3, there's Apache 1 (and subversions) and Apache 2 (and subversions). Your error message -
    Oracle-HTTP-Server/1.3.28Shows you're using Apache 1.3.28
    Secondly, I'm confused by your comment -
    I do not have Apache 9.3 or higher but I think oracle should offer this in its companion CDOracle does offer the Apache server, if you're saying you didn't get it from Oracle then where did your Apache server come from?
    Thirdly, I notice from your config file -
    ErrorLog "|E:\oracle\product\10.1.0\Companion\Apache\Apache\bin\rotatelogs logs/error_log 43200"That you're piping the logs through rotatelogs, are you sure the logfiles haven't just been renamed?

  • Problem with Duplicate Movie Clip which is tracked in an Array

    I have a problem with my inventory code using Shared Objects.
    What i did was to track the collected items in an array. Each time
    the user collects an item, the original iconMC is duplicated and
    loads a picture of the item (function loadImage). However, my
    problem is that this retains the original array so even if I
    already added new items into the inventory, the newest item doesn't
    show. original array length = 2, new array length = 3; the last
    item doesn't show. If I reload my flash, its the only time that
    this shows. Now if I get an item and lessen the inventory, it still
    retains the original length and doubles (or triples, depending on
    how many items i lessened) the last item.
    var so:SharedObject = SharedObject.getLocal("lakbayUser",
    var i:Number = so.data.currentUserIndex;
    var ctr = 0;
    var iconCtr;
    var iconArray: Array; //temporary storage of items placed
    inside icon
    function selectIcon(num){
    eval("iconMC"+num)._alpha = 0;
    so.data.users
    [15][0] = true;
    so.data.users[15][1] = iconArray
    //loads the next icon
    function setNextIconMC(itemCtr, iconCtr){
    if(iconCtr > 0) {
    newName = "iconMC" + iconCtr;
    newPos = 130 * iconCtr;
    _root.itemaHolderMC.iconHolderMC.iconMC0.duplicateMovieClip(newName,iconCtr+1);//does
    not duplcate if unloadMovie is called
    this[newName]._x = newPos;
    this["iconMC"+iconCtr].enabled = true;
    this["iconMC"+iconCtr]._alpha = 100;
    loadMovie("gamit/icon"+itemCtr+".jpg",_root.itemaHolderMC.iconHolderMC[newName]);
    trace(_root.itemaHolderMC.iconHolderMC[newName]);
    else {
    iconMC0.enabled = true;
    iconMC0._alpha = 100;
    loadMovie("gamit/icon"+itemCtr+".jpg",_root.itemaHolderMC.iconHolderMC.iconMC0);
    //loads all the icons into the container
    function loadImage(){
    iconCtr=0;
    iconArray = new Array();
    for(itemCtr = 0; itemCtr < so.data.users
    [14].length; itemCtr++){
    if(so.data.users[14][itemCtr] == true){
    iconArray[iconCtr] = itemCtr;
    setNextIconMC(itemCtr,iconCtr);
    iconCtr++;
    if(iconCtr==0){
    iconMC0._visible = false;
    else iconMC0._visible = true;
    loadImage();
    so.flush();
    stop();

    hey there yenniie - each time you update the array you must
    also call 'flush' to update the SharedObject. also please use the
    'attach code' button to post code, as you can see what happened in
    your post with the ' i ' value. So assuming I'm interpreting the
    the missing characters correctly the method should be:

  • Problem with socket packaging

    There seems to be a problem with the plastic cpu clip i work as a tech in a computer store we build many systems with msi boards, the plastic clip on the 915G series most times has fallen off and pins in the cpu socket have been damaged.
    You should use a plastic insert under the cpu hood to prevent it from falling off.

    Quote
    Not sure either why DelUK thinks this is not a suitable topic for this forum.
    Probably because Del interpreted "You should use a plastic insert under the cpu hood to prevent it from falling off." to mean that "You" was MSI, and not the members of this forum. Oddly enough, I interpreted this the same way.  I don't see where Del indicated the topic was not suitable, though.
    As Del said, and as mentioned in the Forum Rules, MSI does not participate here. If you feel there is a manufacturing problem, contact MSI directly.

  • Problem with windows and my monitor in after effects

    HI . before any thing excuse me for speeking english.
    i have a problem with windows in after effect in my monitor
    my monitor is 15.6 and resolution is 1366*768
    for example when i open interpret footage window i can't see that complete and amount of size window dont visible.
    Thanks.

    Your system doesn't meet the requirements and that is that. AE has required 900 pixel height ever since CS4. Other than changing your screen res or shuffling around windows there is nothing you can do.
    Mylenium

  • Problem with HTML in a read only textarea item

    I'm working on a messaging system for our site. For the body of the message, we use a standard textarea item. However, if we come to the messaging page from a certain page in our system, then we pre-load the textarea item, and make it read only. The only problem with this is that there are HTML tags in the body that we try to pre-load. This is causing problems because they aren't being interpreted as tags, but are being displayed as text. If I make the textarea editable, then everything looks fine, it's just when I set the area to be read only that it doesn't work. Any thoughts on how to fix this? Thanks!

    Not always. A user is allowed to edit that area in most circumstances except for when the user arrives at the page coming from 1 page in particular. In this case, then the field is read-only. At all other times though, it is editable.
    As a workaround, whenever I know I'm coming from this page, I set a variable, and if the variable is set, then I use a Display Only item and then hide the Textarea. If the variable is not set, then I hide my Display Only item and show the Textarea. Not very elegant, but it works.

  • Problem with query for Oracle

    Hello Experts,
    I'm tryng to develop my first application for EP (v7 SP12) with NWDS (without NWDI).
    This application has to read and write data in the EP DB (oracle v10).
    I'm using:
    <u>a Dictionary Project</u> (define the DB Tables)
    <u>a Java Project</u> (define class as DAO, DBManager etc)
    <u>a Library Project</u>
    <u>an EJB Project</u>
    <u>an EAR Project</u>
    With these projects I can deploy a <u>webService</u> in my EP server.
    BUT I have some problem with a query that I'm tryng to sent to my DB through a DAO Class called by my WebService.
    The query is simple and correct but it does not work...
    This is the error message returned (the query id in bold)
    (column names: GIORNO, NOMEDITTA, NOMEAREA, NOMESETTORE)
    <i>HTTP/1.1 500 Internal Server Error
    Connection: close
    Server: SAP J2EE Engine/7.00
    Content-Type: text/xml; charset=UTF-8
    Date: Fri, 21 Sep 2007 14:29:57 GMT
    Set-Cookie: <value is hidden>
    <SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" ><SOAP-ENV:Body><SOAP-ENV:Fault><faultcode>SOAP-ENV:Client</faultcode><faultstring>java.sql.SQLException: com.sap.sql.log.OpenSQLException: The SQL statement <b>"SELECT NOMESETTORE, MIN(? - "GIORNO") AS GIORNI FROM SRS_DATEINFORTUNI WHERE NOMEDITTA = ? AND NOMEAREA= ? GROUP BY NOMESETTORE ORDER BY NOMESETTORE"</b> <u>contains the syntax error[s]: - 1:25 - the arithmetic expression >>? - "GIORNO"<< contains a host variable (parameter marker)</u></faultstring><detail><ns1:getGiorniSettori_com.akhela.giorniSenzaInfortuni.ejb.exception.GiorniSenzaInfortuniException xmlns:ns1='urn:GiorniSenzaInfortuniWSWsd/GiorniSenzaInfortuniWSVi'></ns1:getGiorniSettori_com.akhela.giorniSenzaInfortuni.ejb.exception.GiorniSenzaInfortuniException></detail></SOAP-ENV:Fault></SOAP-ENV:Body></SOAP-ENV:Envelope></i>
    The variable '?' is the today date, the difference <b>"(?-GIORNO)"</b> is an int..
    Moreover in my DAO class the query is <b>"SELECT NOMESETTORE, MIN(? - GIORNO) AS GIORNI FROM SRS_DATEINFORTUNI WHERE NOMEDITTA = ? AND NOMEAREA= ? GROUP BY NOMESETTORE ORDER BY NOMESETTORE</b>", instead in the error message is reported <b>MIN(? - "GIORNO")</b>...
    We have tryed also with alternative query, for example we used <b>"MIN(SYSDATA - GIORNO)"</b> but <b>SYSDATA</b> was interpreted as column name and  not found....
    Any help???
    Best Regards

    Hi, I found something about the Host Variable (http://help.sap.com/saphelp_nw70/helpdata/en/ed/dbf8b7823b084f80a6eb7ad43bdbb9/content.htm), there explain that if you want to use an host variable you have to put ':' as prefix..
    My problem is that <u>I need to extract the minimum of the subtraction between two dates:</u>
    Query <b>MIN(? - GIORNO)</b> --> <i>Error: the arithmetic expression >>? - "GIORNO"<< contains a host variable (parameter marker)</i>
    So I tried to use the ':' as indicated in the manual..
    <b>MIN:(? - GIORNO)</b> --> - <i>SQL syntax error: the token ":" was not expected here
                   - expecting LPAREN, found ':'</i>
    <b>MIN(:(? - GIORNO))</b> --> <i>- 1:25 - Open SQL syntax error: :PARAMETER not allowed
                   - 1:26 - SQL syntax error: the token "(" was not expected here
                   - 1:26 - expecting ID, found '('</i>
    Then I tried to avoid the MIN() function and I tried to do just the subtraction:
    <b>? - GIORNO</b> --><i> - 1:21 - the arithmetic expression >>? - "GIORNO"<< contains a host variable (parameter marker)</i>
    <b>:(? - GIORNO)</b> --> <i>- 1:21 - Open SQL syntax error: :PARAMETER not allowed
                - 1:22 - SQL syntax error: the token "(" was not expected here
                - 1:22 - expecting ID, found '('</i>
    <b>'2007-09-24' - GIORNO</b> --> <i>- 1:34 - SQL syntax error: first argument of operator "-" must be a number, date/time or interval
                     - 1:43 - SQL syntax error: arguments of operator "-" do not have correct types
                     - 1:43 - SQL syntax error: derived columns in SELECT list with AS must be values</i>
    <b>GIORNO - GIORNO</b> --> <i>- 1:21 - the group by list and the select list are inconsistent: the column >>"GIORNO"<< is neither grouped nor aggregated
                  - 1:30 - the group by list and the select list are inconsistent: the column >>"GIORNO"<< is neither grouped nor aggregated</i>
    Why these parts of query are not accepted???
    I don't understand why... I hope you can help me.
    Best Regards
    Alessandro

  • Problem with '-' (dash) in BEx web analyzer

    Hi All,
    we are having a strange problem with 0BPartner and 0Material. Our BPartner and Material have '-'(dash) sign as part of key. While selecting this BPartner/Material in Bex Analyzer, we do not have any problem, but when we try to select the same Bpartner/Material in BEx Web Analyzer, it puts an escape char in from of the dash. For eg:
    If i select the Bpartner "1234-5467" then in Web Analyzer selection box, it is displayed as  "1234\-5467" in the selection screen.
    If i do a search on 1234-5467, it returns zero value.But if i do a search on 1234\-5467, then i get the search hit.
    If i enter the Bpartner in the selection window directly and If i do not put the escape char, then it considers the input as range 1234 - 5467 and returns me no value in the report output.
    Has anyone had this type of issue? Please respond.
    Thanks
    Niveda

    Thanks Olivier,
    Sorry if you had misunderstood my question. They are 2 different Info objects. and i am having problem searching values in each one of these info objects.
    Let me explain it with an example.
    Scenario:
    Let say company defines material in the following format.
    "123", "456", "788", "345"....etc.
    And I have a report which has material as input selection.
    To run this report with single material i enter "123" in the selection screen
    To run this report with a range of materials, I need to enter 123 - 456 in the selection.
    I have no Issues
    Scenario 2.
    Consider a case if the materials are defined in SAP as "001-1234", "987-234"
    "123-234" etc.
    In this scenario, to run the same report for 1 material, i will enter 001-1234. But now the question is how will BW system interpret this material entry.
    Is this 1 single material(001-1234) or a material range (001 - 1234)??
    We have issue here. The system considers this material "001-1234" as a range (001 to 1234) instead of single material and gives me zero output.
    Any help??
    Niveda

  • Problem with streaming video

    Hi!
    I have a problem with my project. Please help me!
    I tried to send a video streaming between 2 computers. I used socket connection and AVReceive2, AVTransmit. When received computer display 59 seconds, it stop the connection, socket is closed and program send a error report.
    I list here:
    =========================================================================
    # An unexpected error has been detected by HotSpot Virtual Machine:
    # EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc=0x070b17ff, pid=1180, tid=2176
    # Java VM: Java HotSpot(TM) Client VM (1.5.0_13-b05 mixed mode, sharing)
    # Problematic frame:
    # C [jmmpegv.dll+0x17ff]
    --------------- T H R E A D ---------------
    Current thread (0x02cdf930): JavaThread "Loop thread: com.sun.media.parser.RawBufferParser$FrameTrack@27391d" daemon [_thread_in_native, id=2176]
    siginfo: ExceptionCode=0xc0000005, reading address 0x0d2451f8
    Registers:
    EAX=0x0000008e, EBX=0xfffffffd, ECX=0x070c2a68, EDX=0x0000ffff
    ESP=0x078ff8a4, EBP=0x0000000d, ESI=0x016c0000, EDI=0x077451f8
    EIP=0x070b17ff, EFLAGS=0x00010202
    Top of Stack: (sp=0x078ff8a4)
    0x078ff8a4: 00000001 00000164 07110650 00000000
    0x078ff8b4: 00000005 0000010f 070c2a34 00000003
    0x078ff8c4: 00000003 070b65c8 070c250f 070c2b3c
    0x078ff8d4: 07740048 00000002 00000000 00000000
    0x078ff8e4: 00000000 00000000 070b66c0 07740048
    0x078ff8f4: 07740048 070b6c3b 00000001 07740048
    0x078ff904: 071101a0 07740048 078ff990 00000000
    0x078ff914: 00000000 070b74b5 07740048 078ff97c
    Instructions: (pc=0x070b17ff)
    0x070b17ef: fc 01 0c 07 0b d7 8b 3d c0 2d 0c 07 c1 fe 03 45
    0x070b17ff: d9 04 b7 8b 35 44 36 0c 07 8b f9 d8 0c 86 d9 1c
    Stack: [0x078c0000,0x07900000), sp=0x078ff8a4, free space=254k
    Native frames: (J=compiled Java code, j=interpreted, Vv=VM code, C=native code)
    C [jmmpegv.dll+0x17ff]
    [error occurred during error reporting, step 120, id 0xc0000005]
    Java frames: (J=compiled Java code, j=interpreted, Vv=VM code)
    j com.ibm.media.codec.video.mpeg.MpegVideo.videoDecode(J[BIIILjava/lang/Object;JII[I[I[I[I[I[I)I+0
    j com.ibm.media.codec.video.mpeg.MpegVideo.process(Ljavax/media/Buffer;Ljavax/media/Buffer;)I+574
    J com.sun.media.BasicFilterModule.process()V
    J com.sun.media.BasicOutputConnector.writeReport()V
    J com.sun.media.BasicFilterModule.process()V
    J com.sun.media.BasicOutputConnector.writeReport()V
    J com.sun.media.SourceThread.process()Z
    j com.sun.media.util.LoopThread.run()V+14
    v ~StubRoutines::call_stub
    --------------- P R O C E S S ---------------
    Java Threads: ( => current thread )
    0x02cdd008 JavaThread "Loop thread: com.sun.media.parser.RawBufferParser$FrameTrack@cec0c5" daemon [_thread_blocked, id=3104]
    0x02d1df88 JavaThread "Loop thread: com.sun.media.renderer.audio.DirectAudioRenderer@2ce908" daemon [_thread_blocked, id=1176]
    =>0x02cdf930 JavaThread "Loop thread: com.sun.media.parser.RawBufferParser$FrameTrack@27391d" daemon [_thread_in_native, id=2176]
    0x02ce0890 JavaThread "Loop thread: com.sun.media.renderer.video.DDRenderer@14a8cd1" daemon [_thread_blocked, id=2296]
    0x02c5e920 JavaThread "Progress Slider thread" daemon [_thread_blocked, id=3172]
    0x02d18c58 JavaThread "Loop thread" daemon [_thread_blocked, id=2920]
    0x00ab5a50 JavaThread "DirectSound Request Thread" daemon [_thread_blocked, id=3984]
    0x00a80480 JavaThread "Progress Slider thread" daemon [_thread_blocked, id=3180]
    0x02c89d18 JavaThread "Loop thread" daemon [_thread_blocked, id=788]
    0x02d37098 JavaThread "JMF thread: SendEventQueue: com.sun.media.PlaybackEngine" daemon [_thread_blocked, id=3328]
    0x02c8bc28 JavaThread "JMF thread: SendEventQueue: com.sun.media.content.unknown.Handler" daemon [_thread_blocked, id=2916]
    0x02c78720 JavaThread "RTPStream" daemon [_thread_blocked, id=3400]
    0x02db1d90 JavaThread "JMF thread: SendEventQueue: com.sun.media.PlaybackEngine" daemon [_thread_blocked, id=3032]
    0x02c73c10 JavaThread "JMF thread: SendEventQueue: com.sun.media.content.unknown.Handler" daemon [_thread_blocked, id=1440]
    0x02c7d930 JavaThread "RTPStream" daemon [_thread_blocked, id=2664]
    0x02d195e0 JavaThread "RTCP Reporter" daemon [_thread_blocked, id=2416]
    0x02d19008 JavaThread "SSRC Cache Cleaner" daemon [_thread_blocked, id=592]
    0x02d24a30 JavaThread "RTP Forwarder for address 192.168.1.34 port 1627" daemon [_thread_in_native, id=376]
    0x02c5fa30 JavaThread "RTCP Forwarder for address192.168.1.34 port 1628" daemon [_thread_in_native, id=3840]
    0x02c5f008 JavaThread "RTPEventHandler" daemon [_thread_blocked, id=2516]
    0x02c60440 JavaThread "RTCP Reporter" daemon [_thread_blocked, id=2820]
    0x02c602b8 JavaThread "SSRC Cache Cleaner" daemon [_thread_blocked, id=3816]
    0x02d403d0 JavaThread "RTP Forwarder for address 192.168.1.34 port 1625" daemon [_thread_in_native, id=2272]
    0x02d0de20 JavaThread "RTCP Forwarder for address192.168.1.34 port 1626" daemon [_thread_in_native, id=1500]
    0x00a64e30 JavaThread "RTPEventHandler" daemon [_thread_blocked, id=3852]
    0x02c9d6e8 JavaThread "TimerQueue" daemon [_thread_blocked, id=2472]
    0x00035c78 JavaThread "DestroyJavaVM" [_thread_blocked, id=2776]
    0x02cbbb10 JavaThread "AWT-EventQueue-0" [_thread_blocked, id=364]
    0x02c58478 JavaThread "AWT-Shutdown" [_thread_blocked, id=1008]
    0x02c58898 JavaThread "AWT-Windows" daemon [_thread_in_native, id=3548]
    0x00aabf08 JavaThread "Java2D Disposer" daemon [_thread_blocked, id=2440]
    0x00a716d0 JavaThread "Low Memory Detector" daemon [_thread_blocked, id=3644]
    0x00a702b0 JavaThread "CompilerThread0" daemon [_thread_blocked, id=3348]
    0x00a6f598 JavaThread "Signal Dispatcher" daemon [_thread_blocked, id=1184]
    0x00a6a300 JavaThread "Finalizer" daemon [_thread_blocked, id=2556]
    0x00a68e78 JavaThread "Reference Handler" daemon [_thread_blocked, id=1296]
    Other Threads:
    0x00a67c38 VMThread [id=1956]
    0x00a6f440 WatcherThread [id=3560]
    VM state:not at safepoint (normal execution)
    VM Mutex/Monitor currently owned by a thread: None
    Heap
    def new generation total 640K, used 501K [0x22a70000, 0x22b20000, 0x22f50000)
    eden space 576K, 76% used [0x22a70000, 0x22adde88, 0x22b00000)
    from space 64K, 96% used [0x22b10000, 0x22b1f758, 0x22b20000)
    to space 64K, 0% used [0x22b00000, 0x22b00000, 0x22b10000)
    tenured generation total 8172K, used 6973K [0x22f50000, 0x2374b000, 0x26a70000)
    the space 8172K, 85% used [0x22f50000, 0x2361f4e0, 0x2361f600, 0x2374b000)
    compacting perm gen total 8192K, used 2098K [0x26a70000, 0x27270000, 0x2aa70000)
    the space 8192K, 25% used [0x26a70000, 0x26c7ca90, 0x26c7cc00, 0x27270000)
    ro space 8192K, 67% used [0x2aa70000, 0x2afd23e0, 0x2afd2400, 0x2b270000)
    rw space 12288K, 47% used [0x2b270000, 0x2b81f450, 0x2b81f600, 0x2be70000)
    Dynamic libraries:
    0x00400000 - 0x0040d000      C:\Program Files\Java\jdk1.5.0_13\jre\bin\java.exe
    0x7c900000 - 0x7c9b0000      C:\WINDOWS\system32\ntdll.dll
    0x7c800000 - 0x7c8f4000      C:\WINDOWS\system32\kernel32.dll
    0x77dd0000 - 0x77e6b000      C:\WINDOWS\system32\ADVAPI32.dll
    0x77e70000 - 0x77f01000      C:\WINDOWS\system32\RPCRT4.dll
    0x77c10000 - 0x77c68000      C:\WINDOWS\system32\MSVCRT.dll
    0x6d740000 - 0x6d8dd000      C:\Program Files\Java\jdk1.5.0_13\jre\bin\client\jvm.dll
    0x77d40000 - 0x77dd0000      C:\WINDOWS\system32\USER32.dll
    0x77f10000 - 0x77f56000      C:\WINDOWS\system32\GDI32.dll
    0x76b40000 - 0x76b6d000      C:\WINDOWS\system32\WINMM.dll
    0x6d300000 - 0x6d308000      C:\Program Files\Java\jdk1.5.0_13\jre\bin\hpi.dll
    0x76bf0000 - 0x76bfb000      C:\WINDOWS\system32\PSAPI.DLL
    0x6d710000 - 0x6d71c000      C:\Program Files\Java\jdk1.5.0_13\jre\bin\verify.dll
    0x6d380000 - 0x6d39d000      C:\Program Files\Java\jdk1.5.0_13\jre\bin\java.dll
    0x6d730000 - 0x6d73f000      C:\Program Files\Java\jdk1.5.0_13\jre\bin\zip.dll
    0x6d070000 - 0x6d1da000      C:\Program Files\Java\jdk1.5.0_13\jre\bin\awt.dll
    0x73000000 - 0x73026000      C:\WINDOWS\system32\WINSPOOL.DRV
    0x76390000 - 0x763ad000      C:\WINDOWS\system32\IMM32.dll
    0x774e0000 - 0x7761c000      C:\WINDOWS\system32\ole32.dll
    0x305e0000 - 0x305f6000      C:\Program Files\Kaspersky Lab\Kaspersky Anti-Virus 7.0\miscr3.dll
    0x77f60000 - 0x77fd6000      C:\WINDOWS\system32\SHLWAPI.dll
    0x30480000 - 0x3048e000      C:\Program Files\Kaspersky Lab\Kaspersky Anti-Virus 7.0\fssync.dll
    0x78130000 - 0x781cb000      C:\WINDOWS\WinSxS\x86_Microsoft.VC80.CRT_1fc8b3b9a1e18e3b_8.0.50727.42_x-ww_0de06acd\MSVCR80.dll
    0x5ad70000 - 0x5ada8000      C:\WINDOWS\system32\uxtheme.dll
    0x73760000 - 0x737a9000      C:\WINDOWS\system32\ddraw.dll
    0x73bc0000 - 0x73bc6000      C:\WINDOWS\system32\DCIMAN32.dll
    0x6d2b0000 - 0x6d300000      C:\Program Files\Java\jdk1.5.0_13\jre\bin\fontmanager.dll
    0x7c9c0000 - 0x7d1d4000      C:\WINDOWS\system32\shell32.dll
    0x773d0000 - 0x774d2000      C:\WINDOWS\WinSxS\x86_Microsoft.Windows.Common-Controls_6595b64144ccf1df_6.0.2600.2180_x-ww_a84f1ff9\comctl32.dll
    0x5d090000 - 0x5d127000      C:\WINDOWS\system32\comctl32.dll
    0x6d540000 - 0x6d553000      C:\Program Files\Java\jdk1.5.0_13\jre\bin\net.dll
    0x71ab0000 - 0x71ac7000      C:\WINDOWS\system32\WS2_32.dll
    0x71aa0000 - 0x71aa8000      C:\WINDOWS\system32\WS2HELP.dll
    0x6d560000 - 0x6d569000      C:\Program Files\Java\jdk1.5.0_13\jre\bin\nio.dll
    0x60300000 - 0x60307000      C:\PROGRA~1\Yahoo!\MESSEN~1\idle.dll
    0x7c340000 - 0x7c396000      C:\PROGRA~1\Yahoo!\MESSEN~1\MSVCR71.dll
    0x71a50000 - 0x71a8f000      C:\WINDOWS\system32\mswsock.dll
    0x662b0000 - 0x66308000      C:\WINDOWS\system32\hnetcfg.dll
    0x71a90000 - 0x71a98000      C:\WINDOWS\System32\wshtcpip.dll
    0x10000000 - 0x10015000      C:\WINDOWS\system32\jmutil.dll
    0x76f20000 - 0x76f47000      C:\WINDOWS\system32\DNSAPI.dll
    0x30460000 - 0x3047b000      C:\Program Files\Kaspersky Lab\Kaspersky Anti-Virus 7.0\dnsq.dll
    0x76fb0000 - 0x76fb8000      C:\WINDOWS\System32\winrnr.dll
    0x76f60000 - 0x76f8c000      C:\WINDOWS\system32\WLDAP32.dll
    0x76fc0000 - 0x76fc6000      C:\WINDOWS\system32\rasadhlp.dll
    0x05540000 - 0x0554d000      C:\WINDOWS\system32\jmacm.dll
    0x77be0000 - 0x77bf5000      C:\WINDOWS\system32\MSACM32.dll
    0x58420000 - 0x58427000      C:\WINDOWS\system32\imaadp32.acm
    0x72cf0000 - 0x72cf7000      C:\WINDOWS\system32\msadp32.acm
    0x58330000 - 0x58335000      C:\WINDOWS\system32\msg711.acm
    0x58300000 - 0x58308000      C:\WINDOWS\system32\msgsm32.acm
    0x582d0000 - 0x582d4000      C:\WINDOWS\system32\tssoft32.acm
    0x73b70000 - 0x73b77000      C:\WINDOWS\system32\tsd32.dll
    0x58310000 - 0x5832d000      C:\WINDOWS\system32\msg723.acm
    0x58340000 - 0x5838d000      C:\WINDOWS\system32\msaud32.acm
    0x582e0000 - 0x582fe000      C:\WINDOWS\system32\sl_anet.acm
    0x581a0000 - 0x581d9000      C:\WINDOWS\system32\iac25_32.ax
    0x58390000 - 0x5841a000      C:\WINDOWS\system32\l3codeca.acm
    0x056d0000 - 0x056dc000      C:\WINDOWS\system32\jmdaud.dll
    0x73f10000 - 0x73f6c000      C:\WINDOWS\system32\DSOUND.dll
    0x77c00000 - 0x77c08000      C:\WINDOWS\system32\VERSION.dll
    0x06d50000 - 0x06dae000      C:\WINDOWS\system32\jmmpa.dll
    0x06c20000 - 0x06c2b000      C:\WINDOWS\system32\jmvcm.dll
    0x75a70000 - 0x75a91000      C:\WINDOWS\system32\MSVFW32.dll
    0x070b0000 - 0x070c6000      C:\WINDOWS\system32\jmmpegv.dll
    0x07210000 - 0x07218000      C:\WINDOWS\system32\jmddraw.dll
    0x073e0000 - 0x0748c000      C:\WINDOWS\system32\jmvh263.dll
    0x6d3e0000 - 0x6d3e6000      C:\Program Files\Java\jdk1.5.0_13\jre\bin\jawt.dll
    0x07340000 - 0x07349000      C:\WINDOWS\system32\jmfjawt.dll
    0x76c30000 - 0x76c5e000      C:\WINDOWS\system32\WINTRUST.dll
    0x77a80000 - 0x77b14000      C:\WINDOWS\system32\CRYPT32.dll
    0x77b20000 - 0x77b32000      C:\WINDOWS\system32\MSASN1.dll
    0x76c90000 - 0x76cb8000      C:\WINDOWS\system32\IMAGEHLP.dll
    0x72d20000 - 0x72d29000      C:\WINDOWS\system32\wdmaud.drv
    0x72d10000 - 0x72d18000      C:\WINDOWS\system32\msacm32.drv
    0x77bd0000 - 0x77bd7000      C:\WINDOWS\system32\midimap.dll
    0x73ee0000 - 0x73ee4000      C:\WINDOWS\system32\KsUser.dll
    VM Arguments:
    java_command: FrameLogin
    Launcher Type: SUN_STANDARD
    Environment Variables:
    CLASSPATH=.;.;C:\PROGRA~1\JMF21~1.1E\lib\sound.jar;C:\PROGRA~1\JMF21~1.1E\lib\jmf.jar;C:\PROGRA~1\JMF21~1.1E\lib;
    PATH=C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem
    USERNAME=Tung
    OS=Windows_NT
    PROCESSOR_IDENTIFIER=x86 Family 15 Model 1 Stepping 2, GenuineIntel
    --------------- S Y S T E M ---------------
    OS: Windows XP Build 2600 Service Pack 2
    CPU:total 1 (cores per cpu 1, threads per core 1) family 15 model 1 stepping 2, cmov, cx8, fxsr, mmx, sse, sse2
    Memory: 4k page, physical 245280k(6040k free), swap 2279684k(1755548k free)
    vm_info: Java HotSpot(TM) Client VM (1.5.0_13-b05) for windows-x86, built on Sep 25 2007 19:11:52 by "java_re" with MS VC++ 6.0
    ==============================================================================
    Is it a problem with jre or a problem with socket connection?
    Please help me! Thanks!

    rohitmadiwal, don't post on old threads. If you have a problem, post a new thread.
    The above error was caused by a bug in the JNI code inside of JMF. The best solution to such problems is to reboot your system, and if that doesn't work, reinstall JMF.
    If neither of those 2 things fix it, it cannot be fixed.

Maybe you are looking for