IGSWD.exe Service not started

Hi friends
I was install the SAP 4.7 EE it was completed succsfully but after completion at 1st time all the services are started Like message server, Dispatcher and igswd.
But after restarting the server igswd service was not started can u help for me why this is not started and how to solve this problem
Vishal

I was having the same issue and saw all of your notes. I searched for "igs watchdog" on this forum and found a solution that worked for us. The note she references (824281) had text that we copied and pasted into our startup profile.
Thanks Sheng (see below).
hi,
When I install R3470*200
I meet the same problem
Refer to note 824281, I solved my problems.
the solution of 824281 are:
Solution
You can manage long parameters with variables in the instance profile.
The online documentation contains a description of this.
Excerpt from the DOCUMENTATION:
Parameter values in instance profiles can contain the following
variable s. '$(parameter name)' is replaced by the value of the
parameter name in brackets.
Example:
Param1 = '/usr/sap/C11/D53/dbg'
Param2 = $(Param1)/stats
This results in
Param2 = /usr/sap/C11/D53/dbg/stats
Regards
Sheng

Similar Messages

SAP Service Not Starting in BI 7.0

Hi All,
Today morning my BI 7.0 server restarted twice automatically, then I started the server in last known good configuration after that when I tried to start the server from SAP MMC it didn't started and when i checked the sap service in services.msc it gives error <b>"Some services stop automatically when they have no work to do"</b>.and didn't get started.
I found a thread similiar to this problem and following that I used sapstartsrv.exe in usr\sap\SID\......\exe directory. This didn't worked for me and by using this Both the services SAPEP2_00 and SAPEP2_01 got removed from services.msc.
Now I have installed these service again and now I am at same status as in morning,
In Event log
For SAPEP2_00 and SAPEP2_01 the following error are avaliable:
--Initialization failed. Service not started. [ntservmain.cpp 1269]
--Unable to change to Directory
gms40\saploc\EP2\DVEBMGS00\work. (Error 53 ERROR_BAD_NETPATH: The network path was not found. ) [ntservstart.cpp 966]
If any one have gone through such situation please help me out from this, Its has became too critical for me now.
Thanks in advance....
Regards
Vinay Paul

Hi
Service are started now but when I am trying to start the server, it is showing strdbs.cmd, sapcpe.exe in red status "could not be started".
Regards
Vinay Paul
Message was edited by:
Vinay Paul

Remote Desktop Management service not starting. service-specific error: %%2284126209 - Event ID: 7024

Hi Forum members,
We have a client that has intermittent issues with RDS on a 2012 R2 server.
As an overview of the environment, the client has a single VMWare host support 2 x Windows 2012 R2 VMs one is the File/Print/Email server and the 2nd is the RDS server used to allow the client to run MYOB Enterprise. Both servers have the AD DS role and
DNS roles amongst others.
The 1st issue is that the RD Connection Broker shows the error: "The server pool does not match the RD Connection Brokers that are in it. and then "1. Cannot connect to any of the specified RD Connection Broker servers".
The above issue seems to be caused by the RDMS service not starting. When you attempt to start it, the service stops and the error in the title is logged in the "System" event log. Full transcript below:
Log Name:      System
Source:        Service Control Manager
Date:          21/01/2015 4:50:32 PM
Event ID:      7024
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      intentionally removed.local
Description:
The Remote Desktop Management service terminated with the following service-specific error: %%2284126209
Event Xml:
<Event xmlns="
<System>
    <Provider Name="Service Control Manager" Guid="{555908d1-a6d7-4695-8e1e-26931d2012f4}" EventSourceName="Service Control Manager" />
    <EventID Qualifiers="49152">7024</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8080000000000000</Keywords>
    <TimeCreated SystemTime="2015-01-21T05:50:32.129949400Z" />
    <EventRecordID>53721</EventRecordID>
    <Correlation />
    <Execution ProcessID="568" ThreadID="12436" />
    <Channel>System</Channel>
    <Computer> intentionally removed.local</Computer>
    <Security />
</System>
<EventData>
    <Data Name="param1">Remote Desktop Management</Data>
    <Data Name="param2">%%2284126209</Data>
    <Binary>520044004D0053000000</Binary>
</EventData>
</Event>
In addition in the "Application" event log, the following error is logged:
Log Name:      Application
Source:        MSSQL$MICROSOFT##WID
Date:          21/01/2015 5:24:47 PM
Event ID:      18456
Task Category: Logon
Level:         Information
Keywords:      Classic,Audit Failure
User:          NETWORK SERVICE
Computer:      intentionally removed.local
Description:
Login failed for user 'NT AUTHORITY\NETWORK SERVICE'. Reason: Could not find a login matching the name provided. [CLIENT: <named pipe>]
Event Xml:
<Event xmlns="
<System>
    <Provider Name="MSSQL$MICROSOFT##WID" />
    <EventID Qualifiers="49152">18456</EventID>
    <Level>0</Level>
    <Task>4</Task>
    <Keywords>0x90000000000000</Keywords>
    <TimeCreated SystemTime="2015-01-21T06:24:47.000000000Z" />
    <EventRecordID>4228336</EventRecordID>
    <Channel>Application</Channel>
    <Computer>intentionally removed.local</Computer>
    <Security UserID="S-1-5-20" />
</System>
<EventData>
    <Data>NT AUTHORITY\NETWORK SERVICE</Data>
    <Data> Reason: Could not find a login matching the name provided.</Data>
    <Data> [CLIENT: <named pipe>]</Data>
    <Binary>184800000E0000001F00000055004E0047004500520045005200410055005300530056005200300033005C004D004900430052004F0053004F0046005400230023005700490044000000070000006D00610073007400650072000000</Binary>
</EventData>
</Event>
I have been attempting to resolve these errors for some time, without success. I have read the many KBs and forum entries related to the above and applied a number of the suggested fixes, including the one which suggests to add the NT SERVICE\ALL SERVICES
to the "Logon as a Service" in the "User Rights Assignment" of the "Default Domain Policy" which is linked to the domain level, that both servers are objects of.
My question to the forum is, can anyone come up with a solution to resolve the above issues and all the RDMS service to start which will then hopefully resolve the broker error?
Regards,
David West.

Hi David,
If virtual machines on the server are Windows Server 2012, then it is not supported to install Remote Desktop Connection Broker on a Domain Controller.
More information for you:
Remote Desktop Services role cannot co-exist with AD DS role on Windows Server 2012
http://support.microsoft.com/kb/2799605/de
Guidelines for installing the Remote Desktop Session Host role service on a computer running Windows Server 2012 without the Remote Desktop Connection Broker role service
http://support.microsoft.com/kb/2833839
If the VMs are Windows Server 2012 R2, I suggest you install RDS on a separate machine to see if the issue persists.
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

JControl.exe does not start...Database Initialisation Problem...MS SQL

Hi,
I was wondering if anyone has any idea on why JCONTROL.exe does not start. I am currently installing NW04s EP7. The DB is on another host and te SCS and CI are on a different host. I am going throught the installation when I get the following error fro the Bootstrap file.
I have already done the following steps:
1. entered the SAP<SID>DB password
2. SQL is started and running on the second host.
3. The bootstrap.propeties files look the same as any other file EP system on our network
[Mar 7, 2007 5:32:35 PM ] [Bootstrap module]> Problem occurred while performing synchronization.
[Mar 7, 2007 5:35:45 PM ] -
[Mar 7, 2007 5:35:45 PM ] Bootstrap MODE:
[Mar 7, 2007 5:35:45 PM ] <INSTANCE GLOBALS>
[Mar 7, 2007 5:35:45 PM ] determined by parameter [ID0117060].
[Mar 7, 2007 5:35:45 PM ] -
[Mar 7, 2007 5:35:46 PM ] Exception occurred:
com.sap.engine.bootstrap.SynchronizationException: Database initialization failed! Check database properties!
     at com.sap.engine.bootstrap.Bootstrap.initDatabaseConnection(Bootstrap.java:422)
     at com.sap.engine.bootstrap.Bootstrap.<init>(Bootstrap.java:144)
     at com.sap.engine.bootstrap.Bootstrap.main(Bootstrap.java:814)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
==[ Caused by: ]==----
com.sap.engine.frame.core.configuration.ConfigurationException: Error occurred: Secure Store lib Dir does not exist
PC04315\sapmnt\ET1\SYS\global\security\lib\tools
     at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.init(ConfigurationManagerBootstrapImpl.java:212)
     at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.<init>(ConfigurationManagerBootstrapImpl.java:49)
     at com.sap.engine.bootstrap.Synchronizer.<init>(Synchronizer.java:60)
     at com.sap.engine.bootstrap.Bootstrap.initDatabaseConnection(Bootstrap.java:419)
     at com.sap.engine.bootstrap.Bootstrap.<init>(Bootstrap.java:144)
     at com.sap.engine.bootstrap.Bootstrap.main(Bootstrap.java:814)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
[Mar 7, 2007 5:35:46 PM ] [Bootstrap module]> Problem occurred while performing synchronization.
Many thanks,
Adil Zafar

==[ Caused by: ]==----
com.sap.engine.frame.core.configuration.ConfigurationException: Error occurred: Secure Store lib Dir does not exist
PC04315\sapmnt\ET1\SYS\global\security\lib\tools
Do you have strong encryption on your current system?

Apple mobile device service not started

Each time i try to sync my iphone to itunes it keeps on saying "apple mobile device service not started"
I know how to start it and everything its that when i start it it says "Windows could nt start the Aplle Mobile Device service on local computer"
I have the newest itunes and i have windows 7

first I would check the event viewer for into about what goes wrong that cause the service to fail
if this don't give a clear image about what the problem is
then I would uninstall itunes and resinstall it
if that didn't help I would ask questions about solve the problem in the itunes for windows forum where people wise in the ways of itunes would be more likely to read your post
https://discussions.apple.com/community/itunes/itunes_for_windows

Apple mobile device service not started please help

Each time i try to sync my iphone to itunes it keeps on saying "apple mobile device service not started"
I know how to start it and everything its that when i start it it says "Windows could nt start the Aplle Mobile Device service on local computer"
I have the newest itunes and i have windows 7

when i start it it says "Windows could nt start the Aplle Mobile Device service on local computer"
Does Windows give you an error code number when AMDS fails to start, Love? If so what number do you you get?

Jstart.exe can not start in sapmmc

when i start our nwce instance, jstart.exe can not start.The error message like below:
M [Thr 4520] Tue Jul 05 17:42:12 2011
M [Thr 4520] ***LOG Q0I=> NiPConnect2: 192.168.1.44:3201: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3155]
M [Thr 4520] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 33/sock 1496
    (SI_ECONN_REFUSE/10061; I4; ST; 192.168.1.44:3201) [nixxi.cpp    3155]
E [Thr 4520] *** ERROR => EnqTCDisconnect: EnqTCIGetConn failed; invalid TChdl 33 [enxxtc.c     346]
M [Thr 4520] ***LOG Q0I=> NiPConnect2: 192.168.1.44:3901: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3155]
M [Thr 4520] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 25/sock 1516
    (SI_ECONN_REFUSE/10061; I4; ST; 192.168.1.44:3901) [nixxi.cpp    3155]
M [Thr 4520] *** ERROR => MsINiWrite: NiBufSend (rc=NIECONN_REFUSED) [msxxi.c      2721]
M [Thr 4520] *** ERROR => MsIAttachEx: MsINiWrite (rc=MSENILAYER) [msxxi.c      878]
M [Thr 4520] *** ERROR => MsPrvGetHdl2: not_attached [msxxi.c      1952]
M
And it is fine in before month.

Please address this question to 'SAP NetWeaver Administrator' forum (SAP NetWeaver Administrator) or log a BC-JAS-COR OSS message.

Oracle distributed document capture service not started

Oracle distributed document capture service not started
and timeout

I did check the Distributed Document Capture Configuration (from the Start menu) and it also indicates that I have selected "Oracle Distributed Document Capture Prompted Login". Once I click "OK" after I supplied all the paths required by server settings, it also displays the error "The username and password could not be validated". What credentials should be entered in the User ID / Password / Domain fields? You should use the username and password entered while configuring the "capture" security model. Leave the domain field blank.
I have not yet configured the IIS at this point. Is it required for the Capture application to authenticate the user I specified during the installation configuration at login? IIS will serve web ODDC interface and will be needed for authentication while accessing ODDC web pages. I beleive that it is not needed for authentication from ODC/ODDC applets. However, when something is not working as expected, I would first finish all required installation and especially post installation setup steps.
I had a look at the IIS configuration in the installation document. It doesn't clearly state which document is the default document for the website one needs to create in IIS. Do you know what it should be? You have to add new web site, say like "Capture" and add virtual directory from assumed path like: C:\Program Files\Oracle\Document Capture\WebPages
For the default document I have WebCapture.asp.
The Oracle Distributed Document Capture service does no start on my PC. Is this required for me to atleast login to the Capture application? It's required only for processing the scanned batches.
I hope that this will help.
Boris
Edited by: tombo on 2012.03.16 06:32

Critical Services Not Starting Automatically & Access to Server occasionally dropping out

For the last few months we have been trying to resolve an issue where access to files on the server (SBS2011 - running domain services, exchange, etc) get so slow or just unresponsive. Logging onto the server is also not possible till it starts responding
again.
We also found that when the server starts, the Netlogon services does not start automatically event though it is set to auto start. There are a number of other services mainly exchange services that do not start as well but it seems this may be due to the
net service not starting.
We have re-installed the OS but this does not seem to have fixed the issue. The environment is a mix of the SBS2011 server, two Windows Server 2003 boxes - one running Terminal Services. The other was being used for SAP but no longer in use. The clients
are mainly XP with a few Windows 7 machines. We are in the process of planning the replacement of the XP machines.

You re-installed SBS2011? - that seems rather drastic. Did you maintain your domain or just set it all up again?
This sounds like a DNS issue but have a look at the event viewer and google/post the Event ID and Source. Given those two you can start to track down the cause and possible fixes at www.eventid.net. Just be aware that SBS2011 has a lot of
"normal" event errors, see http://support.microsoft.com/kb/2483007
You should also run the SBS best practice analyzer and maybe run the "Fix my network" wizard in the SBS console. Also make sure SBS is the DHCP server for the network.
-- Al

I have updated itunes but now phone and ipod will not connect to pc - message reads apple mobile device service not started

i have updated itunes and cannot connect devices - apple mobile device service not started?

Hello there, mikemason5.
The following Knowledge Base article provides some great troubleshooting recommendations:
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

EPMA server service not started

Hi All,
I installed Hyperion 11.1.2.2 Essbase, Planning, EPMA, Calculation Manager, FDM and HFM in the single machine in windows server 2008 R2.
but i am facing two issues.
1. In services, EPMA Server service not started.
2. In FDM, I am getting error in connecting to Essbase.
Error: Unable to retrieve target system data.
Is any thing, i have to install additionally?
Regards,
mady

Hi,
In Windows Event Viewer i got this message.
Log Name: System
Source: Service Control Manager
Date: 9/3/2012 12:46:12 AM
Event ID: 7011
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: hyperionepm
Description:
A timeout (30000 milliseconds) was reached while waiting for a transaction response from the Parallels Tools Service service.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Service Control Manager" Guid="{555908d1-a6d7-4695-8e1e-26931d2012f4}" EventSourceName="Service Control Manager" />
<EventID Qualifiers="49152">7011</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8080000000000000</Keywords>
<TimeCreated SystemTime="2012-09-03T07:46:12.612304600Z" />
<EventRecordID>70587</EventRecordID>
<Correlation />
<Execution ProcessID="440" ThreadID="16540" />
<Channel>System</Channel>
<Computer>hyperionepm</Computer>
<Security />
</System>
<EventData>
<Data Name="param1">30000</Data>
<Data Name="param2">Parallels Tools Service</Data>
</EventData>
</Event>

Jcontrol.exe is not starting

Hi All,
We have 4 intance on 1 big server (64 GB Ram, 6 TB Hardisk) on windows 2008 server. We have installed EP 7.01 Portal, SRM 7.0, CE7.2, MDM.. installed. All these instance were running fine.
Friday We tried installingPI 7.1 EHP1 and it gotfailed at step Starting instance.(in mmc disp+work.EXE is not starting)
Today we installing CE7.1 EHP1 and it was running in Phase 23 install java engine for about 4 hours.
Now just noticed jcontrol.exe of EP7.01 is stopped. I tried restarting, but still its not starting.
Can anyone plz help what could be issue. Below is the log
[Thr 3008] Mon Jul 04 19:41:56 2011
[Thr 3008] *** ERROR => invalid return code of process [bootstrap] (exitcode = -1073741819) [jstartxx.c 1642]
[Thr 3008] JControlExecuteBootstrap: error executing bootstrap node [bootstrap] (rc = -1073741819)
[Thr 3008] JControlCloseProgram: started (exitcode = -1073741819)
[Thr 3008] JControlCloseProgram: good bye... (exitcode = -1073741819)
Regards
Ponnusamy

Hi,
Ask yourself the following questions:
At the OS level, please check CPU utilizations as well as rate of I/O on the disks at the time when things seem stuck. How much CPU do you have? Are these local disks or SAN mounted?
Also, please check the individual hardware requirements of each of these systems as per their installation guides and see if your server exceeds all of them put together or not.
Also, when you installed the previous systems, did you allow all of them 100% of main memory (sapinst asks you this during installation) or did you divide the main memory allotment and gave them only like 25% of available? Better check profiles for each system and see how much RAM you are allowing for each system. None of the systems alone should be allotted too large a share of the RAM on the server as this can cause issues for the other systems.
Regards,
Shitij

PI7.11(PI7.1 EHP1) sapcpe.exe can not start after upgrade to kenerl patch65

Hi,
When I upgrade PI7.11 kernel (On Operator system WIN2003 server x64 64BIT) from patch level 62 to patch level 65
or higher level 67 or71 with JSPM,
after deploy SAP can't be started with error that sapcpe.exe can not start and in 'RED' status.
It's worked before patch level 62.
Did anybody occur the same problem?
Can you give me some advice?
In my WIN2003 server x64, I have the follow DLL libraries:
Microsoft redistributable runtime DLLs VS2005 SP1(X86)
Microsoft redistributable runtime DLLs VS2005 SP1(X86_X64)
Microsoft redistributable runtime DLLs VS2005(X86)
Microsoft Visual C++ 2005 redistributable
Microsoft Visual C++ 2005 redistributable(X64)
Microsoft Visual C++ 2008 redistributable SP1(X64)
Edited by: IBM China on Feb 4, 2010 12:55 PM

Hello
Please do not cross post the same issue on different SDN forums.
Rules of Engagement
https://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement
-> - Please do not Cross post.
Regards
Mark Smyth
XI/PI Moderator

PI7.11(PI7.1 EHP1) sapcpe.exe can not start after upgrade tokenerl patch65

Hi,
When I upgrade PI7.11 kernel (On Operator system WIN2003 server x64 64BIT) from patch level 62 to patch level 65
or higher level 67 or71 with JSPM,
after deploy SAP can't be started with error that sapcpe.exe can not start and in 'RED' status.
It's worked before patch level 62.
Did anybody occur the same problem?
Can you give me some advice?
In my WIN2003 server x64, I have the follow DLL libraries:
Microsoft redistributable runtime DLLs VS2005 SP1(X86)
Microsoft redistributable runtime DLLs VS2005 SP1(X86_X64)
Microsoft redistributable runtime DLLs VS2005(X86)
Microsoft Visual C++ 2005 redistributable
Microsoft Visual C++ 2005 redistributable(X64)
Microsoft Visual C++ 2008 redistributable SP1(X64)
Edited by: IBM China on Feb 4, 2010 12:56 PM

> after deploy SAP can't be started with error that sapcpe.exe can not start and in 'RED' status.
Please check your event log and see if you use the current runtime. A new runtime library is necessary to fix an ATL security issue, see
Note 1375494 - SAP system does not start after applying SAP kernel patch
Markus

Fix for Apple Mobile Device Services not starting

Finally a fix for Apple Mobile Device Services not starting. Basically I got this from someone else in these forums and it worked. Go to C:\Documents and Settings\AllUsers\Application Data\Apple and delete any file in there that says Apple Mobile Device Services (I understand these are cached files...I had about 8 files to delete). Next go to your control panel, click on Add/Delete programs, find Apple Mobile Device Support and delete (remove) it. Once this is all done do not reboot, rather open itunes and go to Help menu /Check for Updates and update to the latest version. This will install the latest version of iTunes and also a new version of Apple Mobile Device Services. Next reboot and it should work for many of you...it did for me. Open iTunes and plug in your device...good luck. I wrote this from memory so if some of the phrases don't match exactly what you see I apologize. Also, this worked for me on a Windows XP computer.

Thanks for posting this, my iTunes randomly started saying the Apple Mobile Device was stopped, and apple's solutions didn't help. I hope this one will, but what do I do if I have the latest iTunes, so it doesn't update? Wait till they come out with an update? It says I need to run the iTunes installer, but I can't find that. Please help, this is really annoying me...=(

IGSWD.exe Service not started

Similar Messages

Maybe you are looking for