IH01Functional Location field NOT EDITABLE

Hi,
We are facing a problem when we enter IH01screen, it shows functional locationa field as NOT editable.
But with some other user ID its editable.
We have checked the roles and authorizations but its fine.
Kindly guide.
Regards
DM

Hi Deepak,
you must be using 4.7 or above versions.In that case you need to set the Parameter ID
PM_TREE_INACTIVE as X in your user settings through SAP easy access System>User Profile>Own Data
Try this and confirm if u still face problem
Regards
Manish

Similar Messages

How to make fields not editable in screen

Hi gurus,
I have a table and i need to make some fields not editable depending on the values of other fields of the table .
Example :
my table have these fields : begin_date, name.
If the begin_date < sy-datum --> then the field ' name' should not be editable.
Tankyou.

Hi,
OK. I did some code and was able to get the results as you want. Created a table YTESTHV with two fields YYDATE and NAME. Generated a two screen maintenence for the table. Screen 2 - Overview screen, screen 3 Detail screen.
Overview screen.
PBO.
PROCESS BEFORE OUTPUT.
MODULE LISTE_INITIALISIEREN.
LOOP AT EXTRACT WITH CONTROL
TCTRL_YTESTHV CURSOR NEXTLINE.
   MODULE LISTE_SHOW_LISTE.
   MODULE DISABLE_FIELDS.
ENDLOOP.
MODULE DISABLE_FIELDS
move extract to YTESTHV.
if YTESTHV-yydate > sy-datum.
   loop at screen.
    if screen-name = 'YTESTHV-NAME'.
     screen-input = '0'.
     modify screen.
     else.
     screen-input = 1.
     modify screen.
    endif.
    endloop.
endif.
Details screen PBO.
PROCESS BEFORE OUTPUT.
MODULE detail_init.
   module change_mode.
module change_mode
if YTESTHV-yydate > sy-datum.
   loop at screen.
     if screen-name = 'YTESTHV-NAME'.
       screen-input = 0.
       modify screen.
     endif.
   endloop.
endif.
When YYDATE is greater than sy-datum field NAME is display only.
Regards,
Himanshu

Adobe Interactive Form text field not editable

Hello,
I created an Adobe Form using transaction SFP and placed a textfield on the body page.
I then created a Web Dynpro application using SE80, placed Interactive Form container on the view. I also checked the flag 'Enabled' and provided the templateSource as my Adobe Form name.
When I test the WD application, the text field is not editable.
Can you please advise what needs to be done?
Thanks
Sagar

Hi...
Place the following code in domodifyview
data:
lr_interactive_form type ref to cl_wd_interactive_form,
lr_method_handler type ref to if_wd_iactive_form_method_hndl.
check first_time = abap_true.
lr_interactive_form ?= view->get_element( 'INTERACTIVE_FORM' ).
lr_method_handler ?= lr_interactive_form->_method_handler.
lr_method_handler->set_legacy_editing_enabled( abap_true ).
Thanks
Gopal.

Location field not displaying

Hi,
Frequently when a location field has a conference number and passcode listed in it you cannot see the full entry (and hence can't join the call!). When you get info on the field and maximise its width, its still not wide enough to show the full entry - is there no other way to get the contents of that field?
Eric

Without seeing the code and/or a sample PDF it's hard to say what's going on. It would probably be better to contact Datalogics to see what they have to say. It would be unusual to use a text field for this, but a button would make sense.

Field Not Editable

Dear All,
I got msg when i make manual change in my Order header level Goods recpt tabBATCH field.
I want to make it not editable then how can it be possible?

Hi Maulik,
That's what I had asked you in your earlier thread?And reply too regarding this query.
[Standard SAP Message|Standard SAP Message]
And if I am not wrong, you want to restrict that manual Batch creation, correct or nor?
If yes then there are some other ways by which you can control it.
- Transaction Variant
- User Exit
- Authorization control.
Regards,
Dhaval

AP Invoice Tax Amount Field not editable

Hi all,
The tax amount (LC) field on the AP Invoice field is not editable. What tax setup do I need to do to allow the tax amount to be editable. All of our sales transactions are tax exempt, however, we need to pay tax to some of our service vendors.
Thanks,
Jane

Hi,
It is Standard SAP B1 behavior, Tax Amount is editable in Purchase Documents and not editable in Sales Documents.
You have to frame the tax formula to match the amount correctly.
Do you want to enter in your own tax amount?
Did you check the form settings for Tax amount?
It is not a problem, its standard SAP B1 behaviour so you can click the link(Orange) button of row level Tax amount
and open the define tax amount distribution window. put the tax amount in the row level and update.
Thanks,
Madhan.

Storage Location field not appearing in Mat Doc.

Dear All,
While doing GR 105 for PO, the Storage Location Field is not appearing in Mat Doc. Moreover, the TO is not getting created immediately while saving the Mat Doc. I don't know why this is happening?
The material has both Qty/Value Updation ticked and all other related configuration is perfect like Mvt. Types/Ref. Mvt. Types etc.
Please help to resolve.
Regards
Samier Danish

Dear rksap7284,
Thanks for your inputs. As I already mentioned confirguartion is perfect yet there is no St. Loc. field being displayed while Mvt. type. 105. I'll provide more information as below:
- PO has Acct. ***. Cat as "P" as it has WBS element.
- Material Type is ERSA
- GR 103 has happened.
Awaiting your reply
Regards
Samier Danish

BROWSER BASED PI SHEET INPUT FIELDS NOT EDITABLE.

Hi Gurus,
I am working on browser based PI sheet. I am able to generate PI sheet but input fields for Browser based PI sheet are not editable. I can not post my entries in T. Code:CO60.
This is happening to all recipe Groups also.
Please give inputs. Thanks in advance.
Regards,
Pradeep

Hi Dhawal,
I am using process Instruction Type 0 (Universal Type) for Process Instruction Category.
I am using browser based PI sheet. It is getting generated but I am unable to Put information in Input
fields to post data.
When I see error logs I get following Error:
Data transfer to the server: data contains error.
I am not using PI category 7 in master Recipe.
Same settings I am using in another client and it is executing. But for this server I am facing Problem.
Can I have your contact no. so we can discuss in detail.
Pradeep
9820969465
Edited by: PRADEEP on Mar 20, 2009 4:54 PM
Edited by: PRADEEP on Mar 20, 2009 4:56 PM

How to make entriesinto table with out first field not edited

hi everyone,
I'm new to SAP ,the task provided to me is to display the data in the display fields when the particular cell in table is selected
at the same time a button is provided make new entries into the table by clicking a button
but when iclick the new entry button the row which is already selected getting erased temporarily
but when i update the new record and save it it is also shown along with new record
the code i used is here below
method onactioncreate .
DATA:
      node_expenseset                     TYPE REF TO if_wd_context_node,
      elem_expenseset                    TYPE REF TO if_wd_context_element,
      stru_expenseset                    TYPE if_exp_main=>element_expenseset .
*   navigate from <CONTEXT> to <EXPENSESET> via lead selection
    node_expenseset = wd_context->get_child_node( 'EXPENSESET' ).
*   @TODO handle not set lead selection
    IF ( node_expenseset IS INITIAL ).
    ENDIF.
*   get element via lead selection
    elem_expenseset = node_expenseset->get_element( ).
*   @TODO handle not set lead selection
    IF ( elem_expenseset IS INITIAL ).
    ENDIF.
clear stru_expenseset.
*   get all declared attributes
    elem_expenseset->set_static_attributes(
      exporting
        static_attributes = stru_expenseset ).
* data:
*    node_expenseset1                    type ref to if_wd_context_node,
*    elem_expenseset1                    type ref to if_wd_context_element,
*    stru_expenseset1                    type if_exp_main=>element_expenseset1 .
** navigate from <CONTEXT> to <EXPENSESET1> via lead selection
* node_expenseset1 = wd_context->get_child_node( name = if_exp_main=>wdctx_expenseset1 ).
** get element via lead selection
* elem_expenseset1 = node_expenseset1->get_element( ).
** alternative access via index
** Elem_Expenseset1 = Node_Expenseset1->get_Element( Index = 1 ).
** @TODO handle non existant child
** if ( Elem_Expenseset1 is initial ).
** endif.
*clear stru_expenseset1.
** get all declared attributes
* elem_expenseset1->get_static_attributes(
*    importing
*      static_attributes = stru_expenseset1   ).
endmethod.
here both table and drill down report are binded to same node
can any one send me the code to clear only drill down report contents
thanks & Regards
Madhu

Hi madhu,
Try the following code to create new entries in the table on action of the create button
DATA:
      node_expenseset                     TYPE REF TO if_wd_context_node,
      elem_expenseset                    TYPE REF TO if_wd_context_element,
      stru_expenseset                    TYPE if_exp_main=>element_expenseset .
navigate from <CONTEXT> to <EXPENSESET> via lead selection
    node_expenseset = wd_context->get_child_node( 'EXPENSESET' ).
@TODO handle not set lead selection
    IF ( node_expenseset IS INITIAL ).
    ENDIF.
create new element
    elem_expenseset = node_expenseset->create_element( ).
*Bind the element to the node
node_expenseset->bind_element(
               new_item = elem_expenseset
               set_initial_elements = abap_false
*set the created element as lead selected
node_expenseset->set_lead_selection( element = elem_expenseset ).
Edited by: krishna chandra on Nov 29, 2010 1:30 PM

CRM Fiori Apps - My Leads, My Opportunity - some fields not editable

Hi,
In CRM MyLeads and My Opportunities, display part is working fine. We are able to get the list of Opportunities and Leads. But when I try to Edit a Lead or an Opportunity, I am not able to type in anything to the "Name " field and in Leads even when I select a date it doesn't get displayed in the date field. And the "Name" field is marked mandatory as well.
We have the below note to be applied only for SPS04 right? We have CRM EHP2 SP06. Is the problem becasue we havent applied this note??
Back-end server (SPS04)
1997580
Employee responsible set as blank
Thanks
Vishnupriya

Hi Vishnupriya,
It seems that mandatory notes are missing. It is better you to apply the SP02 and notes.
UIX02CRM SP02:
2077150 - Corrections for Fiori App: My Leads
2076439 - Corrections for Fiori App: My Opportunities
2075836 - Corrections for Fiori App: My Tasks
2073429 - Corrections for Fiori App: My Appointments
2069769 - Corrections for Fiori App: My Appointments
GBX02CRM SP02:
2081930 - CRM Fiori: Unable to delete a participant in My Opportunities or My Leads app
Regards, Masa
SAP Customer Experience Group - CEG

Incoming Payment Check No. field not editable directly

SBO 2007A, PL 42
Banking >> Incoming Payments >> Payment Means
When I am entering an incoming check from a customer, on the Payment Means window, I can't click in the Check No. field and enter data, but if I tab over it to it from the amount field, I can.
Is this by design or a bug? What's the point of it?

Hi Cindy
It works fine on mine .Is that you are having problem when you enter incoming payment at first time or when you are trying to edit .
It is working fine on mine .I can put check number .
What patch level you are in ? which SBO version
Thank you
Bishal

Po tax field not editable..

Hi, SAP Gurus,
field PO OINV.CURCOURCE is locked... how to unlock that particular Screen Field...
i appreciate your help..
Thanks and Regards,
kaviprashu

Hi,
Thanks Gordon, i am facing this problem in PO, in PO after selecting particular Vendor from Choose From List (F4 Help), field CurSource is disabled.., and its default CurSource value is INR.
i think that if the vendor is not foreign, Field CurSource is disabled by SAP with that country's default Currency , here INR.
Thanks and Regards,
kaviprashu..

Fields not editable - Catch 22

*Never mind - issue solved....
Edited by: Cote Adams on Feb 27, 2009 8:15 PM

Hi,
Sounds interesting, but i need some clarification .
All this happens in PAI in 'user commad module '.
This is actuall code .
      if gv_user_from is not initial and
         gv_user_to   is not initial.
*check if FROM exist
        read table i_lrf_wkqu with key bname = gv_user_from.
        if sy-subrc = 0.
          message e105(5a) with gv_user_from.
        else.
          gv_tabix_from = sy-tabix.
        endif.
Edited by: Krsto Gjergja on Jun 1, 2010 1:00 PM
Edited by: Krsto Gjergja on Jun 1, 2010 1:05 PM

Release Date in Get Info always 6/5/1905 and not editable?

In Get Info, in the new iTunes, the Release Date is not editable. However, when downloading books and importing into iTunes, the Release date is always 6/5/1905. Now I don't think either music or books or anything likely to be downloaded was released in 1905, so, why is the field not editable?
Thank you,
Laura

Actually I never noticed a field called "Release Date" in Get Info of previous versions, only Year. And there is no Release Date field shown in any of my music Get Info. If I try to access Get Info for albums, it asks me if I want to "edit information for multiple items." If I click on Edit Items, there is still no Release Date field - just Year.
However, not one of the Release Dates are correct in any of the books, i.e. those imported into iTunes both before and after the latest "upgrade." AND the Release Date column is blank for them all. So what is it for, anyway?
It is a pity that, if it isn't editable, it should be able to be removed or added depending on the need.
Just found out another weirdness. In the Audiobook List Genre is no longer there. It is in the Playlists, thank heaven, but not in the master list where it really should be. It IS in Music, but not in books. How weird. I hope that is an oversight and will be fixed.
Thank you for your response.

Batch number field in Handling Unit detail (VT01N) is not editable

Hi, Does anyone know how to turn the batch number field (screen field HUMV4-CHARG in program SAPLV51G screen 6410) editable?
Right now, it is not allow us to specify the batch for delivery line item if there are multiple batches for the same line item when the item is packed into a handling unit.
The batch number is in the delivery table but it will not come into the shipment table when the delivery is added to the shipment, nor the field is editable for user input.
Please help!
Thank you,
Minami

HI,
If you are doing online check for userexits/customer exits....
For userexits u can check in the subroutines node in se80(Program->SAPMV50A)....Please check the same.
for customer exits ->SMOD->F4 help->Specify the package as 'VL' and see the ehnacements and then the funtion exits.
Regards,
Nagaraj

IH01Functional Location field NOT EDITABLE

Similar Messages

Maybe you are looking for