IHave an update that has been stuck for a month. Others have come in and been okay. It's stuck on installing. Have pressed and pressed but nothing happens. Any help.
Can anybody tell me how to unstick an update which has been like that for a month. It's says installing but won't budge.
Have you tried any of these things?
Tap the "installing" icon and see if you can pause it. If it does pause, then tap it again and see if it will resume.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. That might start the download again.
Make sure that you do not have a stalled download in iTunes. That could prevent the app from installing.
You can also try deleting the installing app - tap and hold down on the icon until it wiggles - the tap the X on the icon to delete it. Then try to download again. Apps may also be able to be deleted in Settings>General>Usage>Storage if you cannot get the X to pop up on the icon.
If none of those things work for you, download the update in iTunes on your computer and then sync the app to your iPad.
Similar Messages
-
its been 1 day since i reset "erase all contents" my ipad4 but nothing happens, what will i do now?please help me..thanks
Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430http://support.apple.com/kb/ht1430
Cheers, Tom -
iTunes will not install on my computer (Windows 8) and i tried everything in "Issues installing iTunes or QuickTime for Windows" but nothing worked. any help?
Many thanks.
Error 7 (Windows error 127)
Try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
My ipod has received error code (9). I have tried to restore, but failed. Any idea how to restore back to original settings?
Error 9
This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if the device is manually disconnected during the restore process. This issue can be resolved by performing USB troubleshooting, using a different USB dock-connector cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.
http://support.apple.com/kb/TS3694#error9 -
I found out that an 06 mac pro cannot be updated to anything more recent than lion. They guys at the local shop told me this after they tried to update it for me so I could run logic pro 9 in 64 bit mode. I bought lion. Waited two days for the emails. Spent hours following the instructions which sounded so simple until you try them. Finally I found the "redeem" button that was hidden because the size of my safari window was too small to show it and there was no bar at the bottom to scroll over. Without googling "how do you find the app store" and "how do you find quick links" I never would have figured it out. I only mention this so that others may learn from my mistakes. Finally I downloaded lion, supposedly, but nothing happened. There is no indication that anything downloaded, other than the fact that when I try to download it again, it says it's already been downloaded. I spent four hundred bucks at the shop updating, plus whatever they charged me for lion, and I've still got snow leopard and logic pro running at 32 bits. I'm pretty sure nobody can help me, but could you please arrange for the return of my time?
You can go to "Purchases" tab and check again.
If OS X Lion is still not downloading, try at a different network environment.
By the way, Mac Pro (2006) with a newer graphics card runs Mavericks perfectly with modifications in the installer.
It's not allowed to be discussed here, but you can simply google how to do it. -
HT4623 I just tried updating my Iphone 4 and I accepted the terms and conditions but nothing happens
I just tried updating my Iphone 4 and I accepted the terms and conditions but nothing happens
Hello e6ebxsb,
You may need to restart your iPhone. If still unable to accept the terms and conditions, try resetting it.
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/HT1430
Cheers,
Allen -
Premiere Elements 9 asking for a driver update that has been done-not displaying video
I have Premier elements 9 that has worked perfectly well for years, which recently has been giving me a message pop-up box saying that the Intel series 4 expresschipset display driver needs to be updated. I have gone to Intel's site and run their update diagnostic tool and updated this driver, and vefified that it was updated. I restarted the computer, un-installed and re-installed Premier - it still asks for the update and doesn't display any video, rendering it essentially useless. Any suggestions? I only heaviely use the program about once, twice a year...I don't want to be forced to update just because it is mis-behaving, please & thank you
Debra888
Yes the BadDrivers.txt file does exist for Premiere Elements 9.0/9.0.1 running on Windows 7 64 bit when you use the following instructions specific to what you have
Local Disk C
Program Data
Adobe
Premiere Elements
9.0
and in the 9.0 Folder is the BadDrivers.txt file that you delete. Please be sure to have Folder Option Show Hidden Files, Folders, and Drives active so that you can see the complete path cited. After you open a Premiere Elements project, the program will generate at new BadDrivers.txt file and hopefully your issue is gone.
The rationale behind the delete of the BadDrivers.txt file can be found in post 10 of this older thread.
http://forums.adobe.com/thread/732067
That file has been a life saver for many - even those with versions later than 9.
Please let us know if that worked for you.
Thank you.
ATR -
My wife's iPad, on returning from holiday has an onscreen message saying that it is two weeks since last backup. Backup happens when this iPad is plugged in, locked and connected to Wi-Fi. When she presses the ok button nothing happens and it is impossible to go to settings or any other onscreen app. Switching off makes no difference and we have no idea what to do! Any ideas?
Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected. -
I went through all the steps to try to resolve getting the message in a box every time i try to send an e-mail. What next ?
Message is " A copy has been placed in your
Outbox. Sending the message content to the server failed."
Any assistance would be greatly appreciated. My internet works fine as I can send e-mails from my Yahoo account on my MAC no problem.
Address is fine etc.How long has it been going on? I've had my yahoo mess up and if i wait a bit it resolves itself. Yahoo is doing something with their servers and it messes with your mail if your mail happens to be on one of those servers.
-
Hi - I'm trying to register for an iCloud account (I've just had a baby and am terrified I'm going to lose all my photos of him!) but when I try and register, it tells me it needs an email address so I go to edit my username and try and amend it so my email address and username are the same thing but nothing is happening. I keep going round in circles - can someone help?!
Where are you trying to amend your username?
It should be done at http://appleid.apple.com/ -
Hi I try to pay for one year membership LR and PH but nothing happens.
Hi
I try to pay for one year membership LR and PH but get message"wait some minutes. Don not renew or go back to avoid a double payment." when finished payment by VISA. What must I do. A new order and risk a double payment. In my account I cannot see anything for Adobe Creative account.
Company Fotografie Kees Laurijsen
<Removed by Moderator>Moving this discussion to the Adobe Creative Cloud forum.
Kltd if you are facing problems placing your order then please contact our support team at Contact Customer Care. -
My daughter's iPod touch 5 first crashed when listening to iTunes Radio, then it started losing my wifi connection, especially if We went to safari to search. The screen continues to crash, by turning dim then black very suddenly, or green with lines then black. I've rebooted. I've reset. I've tried backing up onto iTunes for a restoration, but have lost many pictures and some apps. One other strange occurrence is that the time has changed on its own. It's like it's possessed. Please help.
It states the iOS 7.0.2 is up to date. Also continues to lose wifi while trying to check this.
The crashing is what is slowing time down, I think. It's a half hour off already -
Ok, so I transferred some songs using my USB cable. Then, I checked my iPod, and it had spaces where there would be songs (ones that I had transferred from my laptop when I first got my iPod, so not bought from iTunes) but they were blank, so I completely turned off my iPod and turned it back on, that's when all of those songs disappeared, but they were still on my computer. Only the ones I had purchased iTunes on my iPod remained. I got some other songs to transfer after that, then it started saying "preparing to update files on iPod" "finishing updates" then it doesn't say anything and the songs still aren't on my iPod. Please explain and tell me if there is a way to fix it!
Maybe here:
iCloud: Troubleshooting creating backups -
please help
You could start by telling us your operating system, and version of Lightroom.
If you are on Windows, it is possible that the drive is assigned a different letter than before. If that's the case, then you simply need to change the drive letter back to whatever it was before.
Otherwise, you would have to reconnect the photos in Lightroom using this method: Adobe Lightroom - Find moved or missing files and folders -
I have the "open new windows in new tab instead" marked in Firefox 3.6.10 and it used to work for me just fine, but now it has stopped working and I don't know if it has something to do with some extension or update that has been done or not.
You can also check for plugins.<br />
See [[Troubleshooting plugins]]
Your above posted system details show multiple Java Console extensions.
You can uninstall (remove) the Java Console extensions and disable the Java Quick Starter extension as you do not need them to run Java applets.
See http://kb.mozillazine.org/Java#Multiple_Java_Console_extensions
See also http://www.java.com/en/download/help/quickstarter.xml - What is Java Quick Starter (JQS)? What is the benefit of running JQS? - 6.0
Disable the Java Quick Starter extension: Tools -> Addons -> Extensions<br />
Control Panel -> Java -> Advanced tab -> Miscellaneous -> Java Quick Starter (disable)
Maybe you are looking for
-
Computer crash with Photoshop Elements 4 with Reader 9
I've gotten by just fine with Elements 4 for editing my photos, so I've never upgraded to the newest one. I've found that every time my system has BOTH Reader 9 AND Elements 4, Windows XP freezes the next time I reboot. I thought it was Reader 9 by
-
Form not displayed when run- a large gray block
I am trying to debug an existing form (which I know runs in our production enviroment). I need to debug to see what is happening to investigate the scope of a potential modification. My problem is that when I startup the OC4J container (no errors) an
-
How to extract CRM Install Base's serial # to BW?
Hello Gurus, I'm working on CRM services area. Now the questions is I have a requirement to extract Install Base's equipment serial number to BW. In a service order I can get Component number. With that component number I can go to IB53 tcode and
-
RDS trouble with CF plugin for eclipse 3.3
This is probably not new, I have installed the plug-in from Adobe and from cfreport.org. I have done a manual install, followed the directions for both sites, read all available forums , but cannot get this to work. I am working my way through some p
-
Htmlb elements do not render anymore
Just upgraded my miniWAS to SP38; all of a sudden, my htmlb elements do not render anymore, neither in Firefox nor IE6... I have basically a table within a form, with a range of buttons; these now just show as underlined "links", with no action taken