Ihave downloaded iCloud to my new PC and am using windows 7 and office 2010. I cannot get iCloud to come up on Outlook with the choices for CalendCar and contacrts, my iMail account is there, but not the general coud choices. What am I doing wrong.

I have downloaded iCloud to my new PC and am using Windows 7 and Offie 2010. I cannot get iCloud to come up on Outlook with the choices for Calendar and Contacts, my iMail accnt is there***.me.com, but not the general Cloud choices for calendar and contacts? What am I doing wrong?

I have I cloud 2.0.2.187 loaded just downloaded yesterday.

Similar Messages

Firefox 14.0.1 is NO longer showing the Norton SAfe Web icon in seacch results. The toolbar is there but NOT the safe web icon next to the URL in search results

After updating to Firefox 14.0.1 my search results NO longer show the Norton WEB Safe Icon next to each result. It worked fine before the upgrade. The Norton tool bar is there and when you click on the site the safe web report is there but NOT the icon in the search results.

Norton released updates for Firefox 14 early the same morning as the release of Firefox 14. Norton usually releases updates on the same morning as new Firefox versions. Have you updated Norton through their LiveUpdate?
*See --> https://community.norton.com/t5/Norton-Toolbar-Norton-Identity/Firefox-14-Support-for-Norton-Toolbar/m-p/760924
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''

Hi, every time I attempt to purchase OXS Mountain Lion I get a message that says unable to complete your purchase because "The product distribution file could not be verified. It may be damaged or was not signed." Any idea what I am doing wrong, cheers.

Hi, every time I attempt to purchase OXS Mountain Lion I get a message that says unable to complete your purchase because "The product distribution file could not be verified. It may be damaged or was not signed." Any idea what I am doing wrong, cheers.

Welcome to Apple Support Communities
Press Shift key on boot and purchase OS X 10.8

I am trying to copy songs to an sd card for a digital photo frame. I changed my setting in iTunes to mp3 format before I downloaded the song but it didn't work. What am I doing wrong? Any suggestions? I would be very grateful!

I am trying to copy songs to an sd card for a digital photo frame. I changed my settings in iTunes to mp3 format before I downloaded them but it did not work. What am I doing wrong? When I play the sd card in my mac or on a lenovo laptop it works but not in the photo frame. I would be grateful for any ideas as to what I am doing wrong.

Unfortunately you've discovered too late how important it is to maintain an up-to-date backup of your iTunes library (and all other data of value). You could, before wiping the drive, have considered making use of a commercial data recovery service that could (albeit at considerable cost) have extracted your library from the hard disk, even if virus infected.
In the absence of that option, you will need to restore the content of your library from its original sources:
Depending on your location, you may be able to re-download any iTunes Store purchases that are still available on the Store
Likewise, most digital purchases from Amazon (including auto-rip copies of purchased CDs) should be available from the Amazon Cloud and via the Amazon Music application - the same may be true of other commercial sources for digital downloads
Content imported from your CDs will have to imported again
The specific situation that you describe regarding the music imported from your friend's external HDD suggests that either the source is badly organized and/or originates from a source other than iTunes (other media players may use alternative tags for information like artist, title, album, etc. that are not wholly consistent with how iTunes handle these). Without details of the issues you're seeing it is difficult to suggest a remedy other than going through the media album-by-album, track-by-track, and correcting the inconsistencies.
In the absence of a backup or access to the original library data there is no option other than painstakingly recreating your library as described above. As you do so, you'll now realize how important creating and maintaining backups are - in my case I have at all times three separate duplicates of my library, in two different locations, where none is ever more than a week old compared to the content of my master library.

HT4623 Hi, every body please help trying to update my I pad with new iOS but there is no soft wear update tab what I am doing wrong

Hi,
all trying to update my iPad with new iOS but when in the settings tab there is no software update tab
What I am doing wrong please or i,m going to throw it

The Settings > General > Software Update option only appears when you have iOS 5+ installed, if you have iOS 4 then you will need to do the update via your computer's iTunes as described half-way down the page that you posted from.
Connect the iPad to your computer's iTunes and copy any purchases off the iPad to your computer via File > Transfer Purchases (File > Devices > Transfer Purchases on iTunes 11). You may also want to copy photos and any important documents off the iPad as well e.g. via the file sharing section at the bottom of the device's apps tab when connected to iTunes, via wifi, email, dropbox etc - they should be included in the backup, but it's best to have a copy of them outside of the backup just in case. You can then force a backup of the iPad by right-clicking the iPad 'Device' on the left-hand sidebar of iTunes and selecting 'Backup' (on iTunes 11 you can enable the left-hand sidebar via option-command-S on a Mac, control-S on a PC)
Then start the update by selecting the iPad on the left-hand sidebar, and on the Summary tab on the right-hand side clicking the Check For Updates button
Updating to iOS 5+ : http://support.apple.com/kb/HT4972
A first gen iPad will be updated to iOS 5.1.1, and an iPad 2 and 3 to iOS 6.1.3

My serial number is not long enough to register, what am I doing wrong?

The serial number on my receipt and on my box are too short for the registration site. does anyone know what I am doing wrong?

Hello, what program are you talking about? Are you look at the correct number?
http://helpx.adobe.com/x-productkb/global/find-serial-number.html

My computer crashed - I set it back to when It was bought, downloaded everything with the back up hard drive I had, Itunes account is there, but none of my music, no purchase music or anything, how do I find it

my computer had a virus, so I set it back to it's orginal state. I used the backup hard drive to download everything back on. ITunes: account shows up let's me log in, says all my files are there, but nothing is showing up, no music at all, none of my purchased music nothing. I thought it was always in ITunes, but it's gone, where is it

check out this post by Zevoneer.

I saved google tasks as a bookmark & the "space" is there but not the tasks

I saved google tasks as a bookmark and then dragged them into the bar above my tabs. The Gmail envelope logo and the word Tasks appear nicely. However, when I click on it, I get a blank rectangle on the left side of my screen, with none of my Google tasks listed. It does say "Tasks" at the top - but no list.
I would really like to be able to pop out google tasks and have them show at my option no matter what tab I'm on. (I can view them any time by going to Gmail or GCalendar, but if those tabs are closed, tasks are closed).
Barring this, is there a different task and calendar I could use that is more compatible w/ firefox. I use an awful lot of gmail but don't use the integration features, so might just be able to use a different set of tools that I could keep "popped out" and viewable as I do my other work.
Thanks
Jeanne

'''Opening in the side bar is the default for bookmarks that are created via a link or button on a website.'''
Ok. I guess when I use the dragging technique, that is creating via a link?
'''You can check the Properties of a bookmark via the right-click context menu in the side bar (Ctrl+B).
In the Bookmarks Manager (Bookmarks > Organize Bookmarks) you can click the More button in the Details pane at the bottom right.'''
Yes, I can do that, but I have no idea what the significance is of what I am seeing in Properties.
'''Make sure that "Load this bookmark in the side bar" is not selected.'''
It was not selected.
May I ask this question another way, please. How DO I add the Google task list to Firefox, step-by-step?
Sorry I am just not getting it. I appreciate your help. This one is just not intuitive for me and I can't extrapolate.
Thank you
Jeanne

Request for advice: TM/TC fails on one Macbook Pro, but not the other?

Dear All- looking for some advice.
Background: I installed a 1TB TC about 3 months ago to improve the wireless connectivity around the home/small business and to act as 1 stop backup- primarily for 2 main Macbook Pro’s. Everything seems to work fine, with the exception that the time machine will only successfully back up one Macbook Pro (my wife's) and not the other (mine). In fact I have NEVER been able to get a full successful backup for my machine since I bought my TC.
Scenario: My wireless router from my TC services 2 Macbook Pro’s, 1 iMac, iPhone, Sony PSP, Sony PS3 etc. All successfully and at a good speed. The TC also runs time machine for backups on the 2 Macbook Pros. One MBPro (my wife’s), has worked like a charm and flawless (pre Oct 2008 model 4.1, 2.5Ghz Intel core 2 Duo, 4GB (667MHz)DDR2 SDRAM, OSX 10.5.8, 250GB HD, 512MB video). TM Backup over wireless to my TC works great. While the other (mine) I have NEVER been able to get a successful backup once (MBPro post Nov 2008 model 5.1, 2.8GHz Intel Core 2 Duo, 4GB (1067MHz) DDR3 RAM, OSX 10.5.8, 300GB HD, 768MB Video).
Problem: I have tried a number different combinations of backup without success. I have diligently read numerous posts before coming here. My attempts include, preferences resets, full disk erases (re-named the disk several times), wireless connectivity, hardwired connectivity (i.e no other devices connected), some software running/ no software running, in sleep mode/without sleep mode, all at once backup or intermittent backups.
All provide me with the same message that it is not able to complete a full backup due to a writing error ‘Backup Failed’. At this stage I would not be convinced that the TC is actually working properly, with the exception that it works flawlessly with my wife’s Macbook Pro (yes every time I erase the drive) and that the wireless connectivity is great. My account preferences and setup/access for the TC/TM are identical to the machine that works. The volume I am trying to backup on my machine is ~258GB, while my wife’s machine that works is only around 78GB. I thought this may still be the source of the failure, but cannot see a work around or why.
Considering I bought the TC to allow a solid reliable backup, I am still unhappy and would like to continue to work for a resolve. Does anyone have any suggestions?
Thanks in advance.
SDP

Welcome to the discussions, xSDP!
Apologies if you have already tried this, but I couldn't find it in your detailed list of prior actions.
Note the exact name of your hard drive on your computer. If you haven't changed this, it will be named Macintosh HD
Open Hard Drive > Applications > Utilities > Disk Utility
Click on the icon on the left side of the window that has the exact same name as your hard drive on the desktop
Click Repair Disk Permissions
It will probably take several hours to do this, so allow plenty of time.
Once the process is complete, see if you can backup now.

My motor receives data via a serial connection, but it won't move. What am I doing wrong?

Hello everyone,
as the title says, I am trying to use a motor called "MP285" by Sutter Instruments via LabView. The control unit of this motor only has a RS232-output, but I use a Serial-to-Usb-Adapter to connect the device to the PC.
My problem is the following:
I tried to perform a basic Input/Output test by using the Ni MAX an sending ASCII strings to the control unit (after configuring it according to the reference manual), which worked fine. I also used the "jabber"-function of the control unit to send an output string to the PC and was also able to read that string from the buffer. Besides, when I used a LabView-VI to send a command via VISA Write, it also appears on the display of the control (at least the ASCII letters).
Accordingly, I assume that the Serial-to-USB-adapter does work. Is that for sure, or can the adapter evoke any other problems?
However, when I try to use the shipped controlling software, the motor won't work. Furthermore, I contacted the customer support and they sent me some VIs and a LabView-Project, which was tested by the company. Unfortunately, it did not work for me. The motor wouldn't move, when I sent the command, although the LabView-interface indicates that there the connection between PC and controller has been established. As the program has many features and I only need a command to move the motor, read the position and set the origin, I tried to build my own VI. I had a look at some basic VIs for motor control and referred to the manual.
As it seems, the controller uses data streams of full bytes (8 bits, not ASCII) in Big Endian for its strings (I copied the information at the bottom of this text). Thus, I tried to concatenate particular strings to send it via VISA in the correct form (see attached). Do I have to convert the "m" into hexadecimal explcitly? I looked up "Convert ASCII to Hexadecimal", but when I try this, the output string does not change.
However, when I send this string to the controller in normal mode, nothing happens . When I activate the Input/Ouput test (see above), there is a m displayed on the controller unit. So I guess, I am messing up the command structure. Can anybody help me please?
Kind regards
PS: Sorry for cleaning up the diagramm..
PPS: For some reason, I could not attach the VI because " The contents of the attachment doesn't match its file type". So, I changed the name in "-vi" instead of ".vi" as suggested by a forum user. Hope this works for you!
Excerpt form the reference manual:
General Information:
"Command requests are single bytes followed by optional parameters and terminated by a
carriage return (CR, 0Dh). The data stream consists of full bytes (all 8 bits — not ASCII.
The lowest order byte (for example, of the four bytes encoding the X coordinate) is the first
into the controller and is the first out. The default Baud rate is 9600. Commands are
processed bytewise by interrupt and executed only after the terminating CR is received.
There are no delimiters within command strings. The controller will reply with carriage
return (CR, 0Dh) at the completion of normal command processing."
Command structure:
Get Current Position      command ‘c’CR 063h + 0Dh
                                           returns xxxxyyyyzzzzCR three signed long (32-bit) integers + 0Dh
Go To Position                 command ‘m’xxxxyyyyzzzzCR 06Dh + three signed long (32-bit) integers + 0Dh
                                            returns CR 0Dh
Setting up for Serial Communication:
First, use the 9-pin serial port cable provided with the MP-285 to connect the “serial port” of
your computer to that of the MP-285 controller. Next configure your terminal emulator (e.g.,
HyperTerminal in Microsoft Windows (9X and above) to the following settings (or their
equivalent):
• TTY mode
• Echo typed characters locally only (do not echo input to the computer serial port back to
the controller)
• Baud rate to 9600
• 8 data bits, no parity, 1 stop bit
• COM port - set to the port to which you have connected the MP-285 controller
Solved!
Go to Solution.
Attachments:
MotorTestVI-vi ‏17 KB

Thank you for your feedback!
To make this clear: I dont know if the motor MOVES when sending the appropriate command via MAX. That is because I dont know how to enter the binary? command. I only tried to send some string like "dear moto please move" to see if this ASCII string can be displayed on the control unit while running the input-mode (which I described above).
This works for both, MAX and my Labview-Vi.
However, these are the I/O traces:
1. MAX: I sent the string: "Test"
NI I/O trace:
viWrite (ASRL25::INSTR (0x026B41E8), "Test", 4, 4) Process ID: 0x0000123C         Thread ID: 0x00001434 Start Time: 16:18:31.599       Call Duration 00:00:00.000 Status: 0 (VI_SUCCESS)
2. LabView-Vi (I removed everything that followed the first "Visa Write" and added the recommended property node to check if my termination char is correct). I sent string "TEST".
14. viOpenDefaultRM (0x065171F0) Process ID: 0x0000154C         Thread ID: 0x00000678 Start Time: 16:24:34.918       Call Duration 00:00:00.000 Status: 0 (VI_SUCCESS)
15. viParseRsrc (0x065171F0, "COM25", 4, 25) Process ID: 0x0000154C         Thread ID: 0x00000678 Start Time: 16:24:34.918       Call Duration 00:00:00.002 Status: 0 (VI_SUCCESS)
16. VISA Set Attribute ("COM25", 0x3FFF001A, 3000) Process ID: 0x0000154C         Thread ID: 0x00000678 Start Time: 16:24:34.920       Call Duration 00:00:00.020 Status: 0 (VI_SUCCESS)
17. VISA Set Attribute ("COM25", 0x3FFF0021, 1200) Process ID: 0x0000154C         Thread ID: 0x00000678 Start Time: 16:24:34.940       Call Duration 00:00:00.000 Status: 0 (VI_SUCCESS)
18. VISA Set Attribute ("COM25", 0x3FFF0022, 8) Process ID: 0x0000154C         Thread ID: 0x00000678 Start Time: 16:24:34.940       Call Duration 00:00:00.001 Status: 0 (VI_SUCCESS)
19. VISA Set Attribute ("COM25", 0x3FFF0024, 10) Process ID: 0x0000154C         Thread ID: 0x00000678 Start Time: 16:24:34.941       Call Duration 00:00:00.000 Status: 0 (VI_SUCCESS)
20. VISA Set Attribute ("COM25", 0x3FFF0023, 0) Process ID: 0x0000154C         Thread ID: 0x00000678 Start Time: 16:24:34.941       Call Duration 00:00:00.000 Status: 0 (VI_SUCCESS)
21. VISA Set Attribute ("COM25", 0x3FFF0038, 1) Process ID: 0x0000154C         Thread ID: 0x00000678 Start Time: 16:24:34.941       Call Duration 00:00:00.000 Status: 0 (VI_SUCCESS)
22. VISA Set Attribute ("COM25", 0x3FFF0018, 13) Process ID: 0x0000154C         Thread ID: 0x00000678 Start Time: 16:24:34.941       Call Duration 00:00:00.000 Status: 0 (VI_SUCCESS)
23. VISA Set Attribute ("COM25", 0x3FFF0025, 0) Process ID: 0x0000154C         Thread ID: 0x00000678 Start Time: 16:24:34.941       Call Duration 00:00:00.000 Status: 0 (VI_SUCCESS)
24. VISA Set Attribute ("COM25", 0x3FFF00B3, 2) Process ID: 0x0000154C         Thread ID: 0x00000678 Start Time: 16:24:34.941       Call Duration 00:00:00.000 Status: 0 (VI_SUCCESS)
25. VISA Get Attribute ("COM25", 0x3FFF0018, 13) Process ID: 0x0000154C         Thread ID: 0x00000678 Start Time: 16:24:34.941       Call Duration 00:00:00.000 Status: 0 (VI_SUCCESS)
26. VISA Get Attribute ("COM25", 0x3FFF0038, True) Process ID: 0x0000154C         Thread ID: 0x00000678 Start Time: 16:24:34.941       Call Duration 00:00:00.000 Status: 0 (VI_SUCCESS)
27. VISA Write ("COM25", "TEST", 4) Process ID: 0x0000154C         Thread ID: 0x00000678 Start Time: 16:24:34.941       Call Duration 00:00:00.001 Status: 0 (VI_SUCCESS)
28. VISA Close ("COM25") Process ID: 0x0000154C         Thread ID: 0x00000678 Start Time: 16:24:34.942       Call Duration 00:00:00.110 Status: 0 (VI_SUCCESS)
Both strings are correctly displayed.

Text wrap not working... What am I doing wrong?

Hi... I guess I do not know how to set up the text wrap in reflow to follow the size of the container that it is in...
I have created a text box with the text the size I want and the width and hight of the box is correct... While editing the text it wraps correctly... But the moment I un-select the the text it ignores its container and overflows... Basically goes from being vertical text back to horizontal... I tried the different overflow options in the layout tab but no luck...
Here are some images for reference... This one is correct and following the wrap (but only happens when i am editing the text)
But then when I deselect the text... The wrap goes away and this happens... Even though you can see the container is still the same width...
My plan is to have it be vertical for desktop browser sizes and then be horizontal for mobile and tablet... I was really hoping it was as easy as setting the size of text box... But it is not seeming to work...
Thank you for any help!!!

Just tried adobe direct support via chat to get help on this.... OMG I wanted to blow my brains out... So very very unhelpful and a complete waste of time.... They had no idea and said moderators on the forums would be better support... I explained that I had asked this question on there several days ago.... Getting so over adobe... WOW!

Cannot get sound to come through my iPad it keeps coming up airplay dock connector and I can't switch it off ?, Cannot get sound to come through my iPad it keeps coming up airplay dock connector and I can't switch it off ?

The sound on my iPad sound doesn't always work, it will work without headphones for less than 3 minutes when I'm playing music but will work for longer when I'm not. It will work for an hour maybe with head phones in but then stop, in which time I have to take them out and put them back in to get the sound to work again. When the sound isn't working airplay says the sound is coming out of a dock connector, and the option, 'iPad' goes.

- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
Try the following to rule out a software problem
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack or other problem
Apple Retail Store - Genius Bar

Sync 622 songs from Itunes to Iphone but Iphone shows 986 songs. What am I doing wrong?

I want to sync 622 songs from my Itunes on iMAC to my Iphone but everytime I sync my Iphone shows 986 songs.
Where are the extra songs coming from?
The extra songs listed under "music on my device" are grayed out with a dashed circle on the Itunes program.
Yes, I clicked on "sync only clicked on music and videos" and "sync selected music, artists"
Is there a simple fix so that when I sync my song from mac to iphone, it is a WYSIWYG process?
I have the Iphone 5 iOS 8.1.3, Mac mid 2007 OSX 10.7.5, Itunes 12.1.0.50
Thanks!

Try the following:
Attach your iPhone to iTunes on your computer and sync as usual.
When the iPhone's summary page is open in iTunes, click on the "Music" tab under "Settings" on the left side (2 rows below "Summary").
Uncheck the "Sync Music" box. Accept the "Are You Sure ...". That will remove all synced music from your iPhone once you click "Apply" in the lower right. (Of course, that music remains in iTunes).
Once that is complete, your iPhone should contain only the extra 364 songs. Do what you like with them.
Then recheck the "Sync Music" box and apply. That will restore the 622 songs to your iPhone.

I was charged for a book in the istore but it did not download. The free sample of the book is there but not the complete book.

I was charged for a book that I tried to download to my new iPad, which I guess is the iPad 3. I downloaded the free sample first. Then I tried to buy the complete book, but it did not download. Only the free sample is there. How can I get the full book?

FOR ASSISTANCE WITH ORDERS - iTUNES STORE CUSTOMER SERVICE
For assistance with billing questions or other order inquiries, please refer to our online support page by clicking here: http://www.apple.com/support/itunes/store/. If you cannot find the answers you are seeking in our robust knowledge base, you can contact us by visiting the following URL http://www.apple.com/support/itunes/store/, clicking on the appropriate Customer Service topic, then using the contact button or email form at the bottom of the page. Responses to emails will be provided as soon as possible.
Phone: 800-275-2273 How to reach a live person: Press 0 four times
Hours of Operation: Mon-Fri: 9am-5pm ET
Email: [email protected]
How to report an issue with Your iTunes Store purchase
http://support.apple.com/kb/HT1933
How to Get a Refund from the App Store
http://gizmodo.com/5886683/how-to-get-a-refund-from-the-app-store
Canceling a Digital Subscription
http://gadgetwise.blogs.nytimes.com/2011/10/14/qa-canceling-a-digital-subscripti on/
 Cheers, Tom

I'm having issues with text layers in photoshop. Text layers show it's there but not visible on the canvas.

I'm having issues with text layers in photoshop. They aren't visible. I've checked font size, alignment, layer order and color. And the layer list shows that it's there. All seems well but I still can't see the text that I write. Need help trouble shooting. (I asked this question about a month ago but I got sidetracked and never circled back.) Thanks.

Please refer to your original topic (Text Layer not Visible.) instead of posting a new topic.

Ihave downloaded iCloud to my new PC and am using windows 7 and office 2010. I cannot get iCloud to come up on Outlook with the choices for CalendCar and contacrts, my iMail account is there, but not the general coud choices. What am I doing wrong.

Similar Messages

Maybe you are looking for