Ihave synced my IPAD to my IMAC and the password on my IPAD no longer works. Can anybody help?
I synced my IPAD 2 to my IMAC and my password on my IPAD no longer works. My IPAD is disabled for longer and longer after each password I try. I have tried my IMAC password and also my APple ID password. Can anybody help?
If you can't remember the passcode that you set on it (which won't be the same as your iTunes or Mac passwords unless you set it the same), then you will need to connect the iPad to the computer that you normally sync to and you should then be able to reset the iPad and re-sync your content to it (http://support.apple.com/kb/HT1212) - you may need to put the iPad into recovery mode : http://support.apple.com/kb/ht1808
Similar Messages
-
My iPad won't charge after plugging into my computer and after holding down the power and home button at same time for 10 seconds… Can anybody help? Has IOS7.0 but not the most up-to-date version
It's just the battery sign - nothing else. I've tried to reboot by holding down both power and home key for 10+ seconds, waiting for the apple logo - but nothing happens. It's plugged into the imac at the moment. I tried to recharge it overnight using the normal charger - but no luck. It went dead during a Skype call with a friend - even though it was powered into the mains - albeit at a low battery level at the time
-
my password
i have another account and my ipad with this account and the password i forget it and the reset question help me my ipad need active to open and i know my account name
-
I bought a book and cannot downloaded it to my Sony E-book, can anybody help????
Read the manual for the Sony E-book... does it actually support ebooks from iTunes?
If you purchased an iBook, it will only work on an iOS device.
iTunes only syncs with iOS devices. -
Hi my icloud is telling me to verify my account - check my e-mail on how to verify but I havent had an e-mail to verify and i seem to keep going round in circles can anybody help please?
Perhaps that email you're waiting for was blocked as spam or is in your junk folder. Something like that.
-
I have added an iPhone 4 to my household and the wifi in our home no longer works for my iPhone 4S or the new iPhone 4. Both will connect to the wifi, but we are not able to view anything i.e. google just runs circles, app store just runs loading, gps on maps not found just runs? I have check all wifi issues with ATT&T, Verizon network all believe that it is the phones? I am confused as my 4S worked fine before adding the 4 to the mix....any thoughts are hits to what to do
Have you rebooted your home router?
-
I have a new iphone 5 and although I had a little trouble downloading all my apps and music, I did this successfully but now when I connect to my itunes, itunes doesn't see it and also bluetooth doesn't seem to be working.Can Anyone help?
Hey leafxxx,
Thanks for the question, and welcome to Apple Support Communities.
The following resource provides troubleshooting steps if your iPhone is not displayed in iTunes when connected:
Apple - Support - iPhone - iTunes Troubleshooting Assistant
http://www.apple.com/support/iphone/assistant/itunes/
For more detailed instructions, see this article:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Enjoy your new iPhone 5!
Matt M. -
Hi, I have an iCloud account with a different iCloud username and password then my Apple ID. I forgot my iCloud password and the email I used is no longer in use. How do I change my iCloud Username and password to match my Apple ID one? Thanks in advance
Hi Cplantin!
Here is an article for you that will help you with this question:
iOS 7: If you're asked for the password to your previous Apple ID when signing out of iCloud
http://support.apple.com/kb/TS5223
Take care, and thanks for visiting the Apple Support Communities.
-Braden -
My ipad just won't let me sign in with my apple password on FaceTime or iMessage since updating to ios7 it says check my network connection, even though my iPhone works fine with the same password, can anybody help please, I have tried numerous things but nothing works. Will I have to wait for a bug fix to sort this? I hear they are working on one a the minute, I hate ios7
Try a Restart.
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
Resetting your settings
You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
Or if this doesn't work and nobody else on the blog doesn't have a better idea you can contact Apple.
Here is a link to their contacts with most of the information below.
http://www.apple.com/contact/ -
I have a 3rd genartion ipod and and the new update is not there please please can someone help
I have a 3rd genartion ipod and and the new update is not there please please can someone help
You posted in the iPad forum instead of the iPod forum. To get answers to your question, next time post in the proper forum. See https://discussions.apple.com/index.jspa I'll request that Apple relocate your post.
Cheers, Tom -
Everytime I turn on iTunes it say it wasn't installed properly and can't burn CD's. However all my music is there for me to listen to on my iPod Nano.
I want to unistall iTunes and it allows me to go through the process until about 2% is waiting for uninstall and then I get an error message that says it couldn't complete the uninstall and gives me an error code of 2330.
Can anybody please help me. iTunes wants to charge $19.
Thank you.ive never had any problems with ap[ple products in the past... this is a first and a stupid problem if you ask me
-
I am facing problem regarding graphical user interface. I am using text box for editing files. I want to show the line numbers and graphical breakpoints along with text box. Can anybody help me in this? Thanks.
Thanks for you reply.
But actually I don't want to show the \ (backslashes) to the user in my text box.
Ok let me elaborate this problem little more.
I want to show my text box as it is in normal editors e.g. In Matlab editor. There is a text box and on left side the gray bar shows the line numbers corresponding to the text. Further more i want that the user should be able to click on any line number to mark specific line as breakpoint (red circle or any graphical indication for mark).
Regards,
Waqas Ahmad -
When I try to send email from my iPad and iPhone it says that I have the wrong username and/or password, but I know they are correct. Can someone help me?
"Your email account" means to tap on the name of your email account. Whatever it is listed as in the settings.
In my mail settings, one of my email accounts is a Comcast account. I tap on the Comcast name and it brings up this window.
Then I tap on the arrow under the Outgoing mail server smtp setting to get to the next window.
In the resulting window, I then tap on the arrow next to the smtp server under the Primary Server setting.
That brings up this window in which I check to make sure that my user name and password have been entered correctly. If those items are missing, enter them in the appropriate fields and then tap done. -
I was using Firefox ESR 10.0.11 and was forced to upgrade to 17.0.7 yesterday, even though my cfg file is set to not allow updates. Since the upgrade, the Search by Name function has stopped working, i.e.: I used to be able to type "yahoo" into the address bar and go straight to yahoo; now, when I type anything that is not a complete URL into the address bar, it goes to allied.com. I have already gone into about:config and changed keyword:URL to http://www.google.com/search?ie=UTF-8&oe=UTF-8&sourceid=navclient&gfns=1&q= and have also installed the Search By Name add-on. Neither of these work. Please help me.
Thank you for your reply. However, had you read my issue in full, you'd have noticed that I have ALREADY downloaded and installed the "Browse By Name" add-on, and it DID NOT work.
-
All I'm wanting to do is unlock this so I can use it in a foreign country rather than buying a cheap phone when I get there. Because it has the lock I can't get past that screen. If I can Sprint will factory unlock for me. Is this a lost cause?
You need to contact him and get the password.
Sorry.
Maybe you are looking for
-
Hi I tried to do an update on my Iphone 4 hardware but it failed (dont knoyw why) I followed instructions to restore my Iphone unfortunatel all im left with is an image of itunes with a usb and a dead phone can someone help???
-
I have a Mac OS X ver. 10.5.8 and I've used Firefox on it since I got it 3 years (?) ago. The most recent update for both Firefox and Thunderbird keeps prompting me, but when I say "yes" to update, a bar appears with lines moving through it and it sa
-
Clicking on a link opens a maximized window.
I have links that opens a child window. I am using window.open without height and width(as per the requirement). In firefox 30, it always opens the pop up with the size of the parent window. Is there anything that we can restrict Firefox from taking
-
How can I apply a timestretch to different null objects and then use them to parent layers?
I am using several hundred stills which are held on screen for different lengths of time. Is there a way to create null objects with various timestretch values and then use them to parent my stills? I'm trying to find an equivalent to the 'paste attr
-
Old mail in Yahoo account missing
It may be a Yahoo problem but ... My Yahoo! account is many years old. For some reason it all screwed up last night. I deleted the account in MacMail and recreated it. All my old mail is not available! AND the iMac/MacMail account will not connect bu