IHome and iphone compatability issue

We just received a nice ihome iH14, which I guess was produced back when the iPhone was not around yet since it doesn't mention anywhere whether it is compatible with the iPhone or not. So I just unboxed it and plugged in my iphone to the dock. A window pops up and it says "This device is not compatible with iphone, would you like to turn on airplane mode to reduce interference?"
Now it is odd that it says this because A) it appears to be charging properly and B) it plays the music out of the speaker and sounds fine.
Now the reason I am on here with this issue is to make sure that this is healthy for my iPhone. Is there anything wrong at all with using this ihome device, or can I just continue using it?
Also, it doesn't really fit well in the dock so it seems like it is just hanging on by the plug, which kind of scares me...are there any adapters made for the iphone also so that it is more snug?
Thanks!

This happens to me also, so far I have not seen any issues. So just say no, unless you don't want to take any calls etc. And enjoy

Similar Messages

Can someone provide HTML and CSS compatibility issues list in IE 12?

Hi There,
We recently come to know from our team members that Microsoft going to release Internet Explorer (IE) 12. But there are some compatibility issues with HTML and CSS which can break our web sites. Can someone provide us list of issues that we can face in IE
12, so that we can work on their resolution.
Regards,
Ankush

Hi,
http://status.modern.ie
or
f12>Console tab>
document.body.style
Rob^_^

Seagate ST9750420AS HDD and W700ds compatability issue

There seems to be a compatability issue with the Seagate 750GB drives (ST9750420AS) and the W700ds (and possibly other W series notebooks).
With the controller set to RAID in BIOS Windows 7 and possibly other OSs can not access the HDDs. This configuration results in a 7B "inaccessable boot device" error BSOD.
Testing revealed only the ST9750420AS with FW 0001SDM5 (the only FW avaible) results in the 7B BSOD regardless of the RAID driver version installed. I have not phiscally removed the Turbo memory device to see if it plays a role in the problem or not.
The W700ds (2757) system I have available to test is compatable with the following Seagate (drives with various FW versions):
ST9160823ASG
ST9500325AS
ST9500420ASG
ST9500420AS
ST9640320AS
These were tested with Widows XPP 32bit, Windows 7 64bit and Linux 64 bit, these were tested in both RAID and non RAID configurations.
And not compatable with:
ST9750420AS, tested with Windosw 7 x64 in RAID configuration.
Any comments, corrections or resolution welcom.
Thanks
JMG

Hi Jamessts,
Welcome to the HP Forums!
I have read your post on installing your HDD to your HP computer, and I would be happy to be of assistance!
To determine your product specifications, I will need to know what the Product and Model Number of your desktop is. The next piece of information I will need is the version of Windows you have on your computer.
Since you stated that the HDD works in another computer, I suggest following this resource: "Windows could not complete the installation..." solved by MarkBeacom. This should help in setting up your HDD for use on your computer.
Please post back with the results of your troubleshooting, and I will diligently follow up with you!
Cheers
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Vista "Problem Reports and Solutions" - Compatibility issues?

The Visa +Problem Reports and Solutions control panel+ is reporting three problems which I cannot seem to be able to find a resolution to.
( So far I've just installed Vista 32 business ed. on my iMac 20". Installed bootcamp drivers, updated bootcamp to 2.1 and applied Vista updates.)
*The Problem Reports and Solutions control panel reports the following:*
1. Download and install the driver for Apple performance counter
This problem was caused by Apple performance counter, which was created by Apple Inc..
2. Compatibility issue between Intel 82801GBM (ICH7-M) LPC Interface Controller - 27B9 and Windows. This problem was caused by a compatibility issue between Intel 82801GBM (ICH7-M) LPC Interface Controller - 27B9 and this version of Windows. Intel 82801GBM (ICH7-M) LPC Interface Controller - 27B9 was created by Intel Corporation and is distributed by Apple Inc..
3. Problem caused by Apple Desktop Null Driver.
This problem was caused by a compatibility issue between this version of Windows and Apple Desktop Null Driver. This product is usually distributed by the company that manufactured your device or computer. Note. If you bought Apple Desktop Null Driver from a retailer and installed it yourself, you will need to contact its manufacturer.
Are these genuine, and if so, is there a solution? No solutions are proposed by Vista itself.
Mac OS 10.5.5 , bootcamp 2.1
Message was edited by: noutram

A performance counter is not something that is usually in use by any application except by the developers of the unit itself. nothing to be alarmed about (well, except perhaps that it should have been removed).
A null driver is (as the name indicates) null, there is no functionality assigned with it. MS error message is just brilliant "there is an error in your null driver", like what, there is no functionality in a null driver. So no problems there either.
I got the 2 above error messages on the very first generation 17" MBP for ages and so far not seen any impacts in it for my work.
The Intel issue is interesting, it might be a good idea to see if Intel has an updated driver for the problem.

Intel and IPhone Sync issues

Some forwarded this to me. It might be relevant to some users here.
"Senior Editor, iLounge
Published: Thursday, November 5, 2009
News Category: iPhone
Intel has issued a comment concerning the iPhone sync issues some users are experiencing with certain PCs containing a specific Intel chipset. “Our leading theory is a BIOS or system configuration issue, but we are still investigating,” Intel said. The basic input/output system (BIOS) is the boot firmware run by a PC on startup, which identifies, tests, and initializes core system devices such as the graphics card, hard disk, and other hardware. As we reported earlier this week, the syncing issue appears to linked to Intel’s P55 Express chipset and its USB controller, which leaves the afflicted machines able to recognize the iPhone but unable to sync. The problem has been most prevalent among PCs running 64-bit Windows 7, but the issue has also been reported on machines running both 32-bit and 64-bit versions of both Windows 7 and Vista."

Hi R@chel,
It sounds as if you are having difficulty making sure your iPhone only gets the music you want. In order to do this, you need to manually manage the data that gets synced to your iPhone. This article explains how to do so -
iOS: How to transfer or sync content to your computer
http://support.apple.com/kb/HT1296
Specifically -
Hi R@chel,
It sounds as if you are having difficulty making sure your iPhone only gets the music you want. In order to do this, you need to manually manage the data that gets synced to your iPhone. This article explains how to do so -
iOS: How to transfer or sync content to your computer
http://support.apple.com/kb/HT1296
Specifically -
Syncing manually
If you prefer not to automatically sync content to your device, you can set up manual syncing:
Connect your device to your computer and open iTunes.
Click the Devices button in the upper-right corner. (If you're viewing the iTunes Store, click the Library button in the upper-right corner. The Devices button will appear.)
In the main iTunes browser window, select the Summary tab.
Select the option to Manually manage music and videos or Manually manage music. This will deselect the automatic sync settings for the Music, Movies, and TV Shows tabs.
Click Apply.
And -
After following the steps above, you can add individual songs, videos, and playlists from iTunes to your device. To add content to your device:
Select your device.
Click On this Device.
Choose Add to in the upper-right corner. If you drag a song, video, TV show, or movie while viewing the media in your iTunes library, a sidebar will show up on the right. You can drag your content onto the device. You can also create and modify playlists directly on the device.
Thanks for using Apple Support Communities.
Best,
Brett L
Thanks for using Apple Support Communities.
Best,
Brett L

Car Receivers that play DVDs and iphone compatable which one?

Hi I am looking to get a car receiver installed with dvd and iphone playing enabled to the max but would also like GPS even if I could get the tom tom app and google maps playing on this receiver is fine.
But what sort of DVD car receiver do people really reccomend for iphone I think I have an iphone 3gs or one of the earlier ones that I hope will last until the iphone 6 comes out, in the meantime I will need a receiver that also charges this old dying iphone.
The receivers I have looked at and sort of like are: Eclipse AVN827GA for around $2499 at the darer scale. And double din A/V receiver Sony XAV-63 around $399 but I don't think this cheaper one has gps can my iphone gps be displayed on this model. Or the pioneer AVH-2450BT with a smaller screen and priced around $899 I also don't think this has GPS and again can my iphone's tom tom and google maps and TVNZ ondemand (now on my iphone in New Zealand) and you tube be played on these cheaper receivers.
But people out there might know of better receivers for iphone in general.
Thanks
Shona

if it have hdmi in then one can use the hdmi adator for iphones

AX and WinXP compatibility issue

Hello,
i got my secondary WinXP Pro C2D SP2 Laptop to work with AX without problems. I can see Loudspeakers in iTunes and also my iPod Touch is seen as a remote controller.
This works both with WLAN and Ethernet cable connected to my ADSL Router.
AX light is green and it doesn't give any errors.
Problem:
With my primary PC, WinXP P4 SP2, AX doesn't work at all. AirPort Utility doesn't recognize AX to the list. Neither i can see my IPod Touch Remote controller in this primary PC. I wonder if this could be a common problem for both ?
Equipment and connections:
TeleWell ADSL Modem Router with WLAN 802.11 b/g
Airport Express with 802.11n, ver. 7.3.2
AirPort Utility, ver. 5.3.2 in both WinXP PCs
iTunes 8.0.20 in both WinXP PCs
AX working as a client in existing wireless network
With primary PC i have tried following combinations to get AX to Airport Utility list without success:
1. PC connected to ADSL Router with Ethernet cable and AX connected to ADSL Router with Ethernet cable
2. PC connected to ADSL Router with Ethernet cable and AX connected to ADSL Router with WLAN
3. PC connected to ADSL Router with WLAN and AX connected to ADSL Router with WLAN
Both Windows and my Zonealarm Firewalls are off.
No Firewall active in ADSL router.
WLAN security is off (no WEB/WPA used).
AX gets its IP address and AX is also seen in ARP table. This can be seen in ADSL Router. Ping works normally to AX from both PCs.
After these tryouts i'm thinking if this is somekind of compatibility or 3rd party program issue that i have on my PC. Specially because both iPod Touch Remote controller and AX doesn't work in this primary PC, but they work in a another one ?
I have read already quite a many of threads from this forum but haven't found a similar case.
Does anybody have an idea what this problem could be ? Could some other installed programs disturb iTunes/iPod Touch/AX usage ?
One clear difference there is between the PCs, primary PC (that who's having problems) has German OS and secondary English OS. I doubt anyhow that this could be a problem.
Greetings from snowy Scandinavia and thank you for your support,
Petri
Message was edited by: easterson

Hello,
i got my secondary WinXP Pro C2D SP2 Laptop to work with AX without problems. I can see Loudspeakers in iTunes and also my iPod Touch is seen as a remote controller.
This works both with WLAN and Ethernet cable connected to my ADSL Router.
AX light is green and it doesn't give any errors.
Problem:
With my primary PC, WinXP P4 SP2, AX doesn't work at all. AirPort Utility doesn't recognize AX to the list. Neither i can see my IPod Touch Remote controller in this primary PC. I wonder if this could be a common problem for both ?
Equipment and connections:
TeleWell ADSL Modem Router with WLAN 802.11 b/g
Airport Express with 802.11n, ver. 7.3.2
AirPort Utility, ver. 5.3.2 in both WinXP PCs
iTunes 8.0.20 in both WinXP PCs
AX working as a client in existing wireless network
With primary PC i have tried following combinations to get AX to Airport Utility list without success:
1. PC connected to ADSL Router with Ethernet cable and AX connected to ADSL Router with Ethernet cable
2. PC connected to ADSL Router with Ethernet cable and AX connected to ADSL Router with WLAN
3. PC connected to ADSL Router with WLAN and AX connected to ADSL Router with WLAN
Both Windows and my Zonealarm Firewalls are off.
No Firewall active in ADSL router.
WLAN security is off (no WEB/WPA used).
AX gets its IP address and AX is also seen in ARP table. This can be seen in ADSL Router. Ping works normally to AX from both PCs.
After these tryouts i'm thinking if this is somekind of compatibility or 3rd party program issue that i have on my PC. Specially because both iPod Touch Remote controller and AX doesn't work in this primary PC, but they work in a another one ?
I have read already quite a many of threads from this forum but haven't found a similar case.
Does anybody have an idea what this problem could be ? Could some other installed programs disturb iTunes/iPod Touch/AX usage ?
One clear difference there is between the PCs, primary PC (that who's having problems) has German OS and secondary English OS. I doubt anyhow that this could be a problem.
Greetings from snowy Scandinavia and thank you for your support,
Petri
Message was edited by: easterson

Ical and iphone syncing issues

I'll pile on with my own iphone/ical sync issue, to add to all the others i see.
my iphone and ical synched just fine from the start, but since installing software updates, suddenly the calendar on iphone will not accept any new information.
originally, i'd set up my entourage to sync to ical, and in turn 'sync' to iphone, but to test if this runaround was the problem, i've followed some of the other instructions laid out elswhere on this board to set up a test calendar on ical.
this hasn't worked either. nor will the iphone calendar accept any new info when i explicitly direct the itunes software to replace info.
i've also tried resetting everything, but those stubborn pre-software update calendar items remain on my iphone, completely unchanged.
anyone have any ideas?

The same thing happened to me. As of today's update (11/16) I got to the root of the problem. go into itunes with iphone connected. select information, and if your problem is mine, you will see that all ical and mailbox synching options are now strangely unchecked. check the boxes for what you want to synch. click apply. for an unknown reason, the software update then reveals that it thinks your phone is synching to another account. just keep clicking through, selecting synching with your computer and "new" account. ditto for the keychain issues. presto! it all synchs correctly again.
hope this helps!

MacBook (iTunes) and iPhone 5 Issues

This is not an actual question, though a complaint for Apple to know how dull their products can become over time. I've purchased my iPhone 5 (and then replaced it over the screen issues one year ago) and my MacBook Pro (13', late 2011, 2,8 Ghz) is just getting worse and worse in its overall performance (with Mavericks in particular).
One of my biggest complains is that music doesn't sync to my iPhone properly over WiFi. Since we live in 2014 for me it is very inconvenient to sync music via cable. Therefore I sync my music rarely (although I'd do it on the daily basis if not the issues I experienced so far) using a very inconvenient method of deleting all music from last sync and syncing the new music onto iPhone.
Macbook is another story. Since it was purchased three years ago I can't believe how such expensive laptop can't stand by its name. Everything became much more slower with Mavericks (start up of the system, app loading and etc.) Particularly iTunes is a nightmare - sometimes it can't see the device over the internet and always cancelling the sync when I'm uploading my music.
This is general complaint, not a question. I'm sorry for my english.

if this phone has never been jailbroken or hacked, try these steps as needed:
1. Settings > General > Reset > Reset All Settings
2. Get new SIM card from AT&T
3. Get new cable and charger from Apple
4. Restore iOS using iTunes, also restoring a backup
5. Restore iOS using iTunes as a new phone, without restoring a backup
Use iTunes to restore your iOS device to factory settings
iOS: Back up and restore your iOS device with iCloud or iTunes
If restoring as new doesn't help, there's a hardware problem that needs evaluation by Apple or an Apple authorized service provider.

WAP2000 and iPhone connectivity issues?

I have several WAP2000 (Firmware 2.0.0.5), and while they work fine for PC's, iPhones, iPod touches cannot connect to them.
Well, they connect briefly, get an IP address from the router, and immediately drop the connection to re-connect again.
I have tried changing channels, eliminating all but one of the AP's, and so forth.
Has anyone else had issues with this firmware? I see posts where people are saying their iPhones connect up fine. This happens on versions 3.x and 4.x of the iphone O.S. It's not limited to one iphone or ipod touch; we've tried several.
If anyone else is running 2.0.0.5 of the firmware and they are having success with an iphone, can you please tell me your settings?
Thanks in advance!
--Greg

Greg,
I think I have the same problem but with a Blackberry Storm 2. (I posted in the last two days--Look for WAP2000 and Storm 2) I see the Storm 2 connect successfully to the WAP2000 but then never establish a connection to the Blackberry Enterprise Server (BES)...Necessary to do anything useful with a Blackberry device. A few months aga (Before I had my Storm 2) I had borrowed an iPhone for a week. During that time I tried to use my WiFi but it never seemed to work (ie Established a WiFi link but then couldn't do anything else with it.). Since I didn't have it long and WiFi wasn't the object of my testing I ignored the problem. Now troubleshooting my Storm 2 problem and realizing that other WiFi devices on my network have been experiencing issues (the Storm 2 appears to have been most impacted) it is very likely that the iPhone I borrowed was experiencing the same problem.
You can read my previous post but a quick summary--> When I used a packet analyzer (Wireshark) I saw that my router was issuing ARP address discovery broadcasts to the Storm 2's IP address but the Storm 2 was not responding. I had tested the same setup with a different wireless access point (Linksys WAP54G) and saw the Storm 2 properly respond (and the Storm 2 worked perfectly when connected to the WAP54G). I concluded that the WAP2000 was either not forwarding the ARP broadcast to the Storm 2 or it was not forwarding the Storm 2's response back to the LAN.
I created a work around the now allows my Storm 2 (and multiple other devices) to function successfully on the network. I have a Cisco ASA5505 firewall that has a ststic ARP table and is capable or proxy-arp (ie. It can respond to ARP requests on behalf of devices on the network). I simply created an entry for my Storm 2 and now it functions properly. I also had a laptop and an IP security camera that had intermittent connectivity issues. When I added static ARP entries for these items their problems disappeared as well.
I don't think this is a settings issues so I am hoping Cisco confirms this as a bug and issues a firmware update.
I hope this helps.
--Gerhard Wittreich

Windows 7 and Director - compatibility issues?

I have the old Macromedia Director 7 and Lingo which worked great on XP and Vista - unfortunately it won't work at all on my Windows 7 Home Premium! I also have Adobe PageMaker 6.5 which also does not like Windows 7 (but as it worked well on the previous Windows versions I was loathe to purchase an upgrade).
I have tried to download the trial versions of the newer Director but nothing happens after you press the 'download' button - frustrating! I have removed the pop up bocker - I have even turned off my anti-virus software incase that was the issue - nothing works!
Is there ANYTHING happening in the future which will allow these products or their newer versions to run effectively on Windows 7?? This is 2012 for goodness sake - surely an update/upgrade would have been on the drawing board to keep pace with Microsoft?
If someone can assist me I would gratefully appreciate it!
Sahra K

I was just wondering, did you ever get any answers to this. I'm having the same problems with both Director 8.5 and DirectorMX 2004
[email protected]
Bruce

Itunes and Iphone sync issues

Hi There,
So I have a slight problem and would be grateful if someone would shed some light as to how I can overcome this.
I have an iPhone 5 and iTunes for windows, however, I have not downloaded the current software for the iPhone 5 as I do no have any storage space for it. I have recently tried to update my iPhone's music playlist but the playlist I want to sync is not, however, my old music and playlists keep syncing instead, and it keeps adding albums.In my new playlist I have approx 200ish songs whereas my iTunes is syncing over 700ish (and I've made sure I have not clicked and synced my library- my library has over 1000 so not sure where its syncing 700) I have tried several times to fix this by;
switching off phone
closing iTunes and opening it again
creating a different playlist and re-syncing music
de-selecting albums and artists manually
de-selecting all music then syncing
created a different playlist
and none of the above have worked at all
It would be much appreciated if anyone has any advice or guidance as to how I can fix this, as I have new music I want to listen to, and with this new music I'll have more storage space!
Thanks in advance!

Hi R@chel,
It sounds as if you are having difficulty making sure your iPhone only gets the music you want. In order to do this, you need to manually manage the data that gets synced to your iPhone. This article explains how to do so -
iOS: How to transfer or sync content to your computer
http://support.apple.com/kb/HT1296
Specifically -
Hi R@chel,
It sounds as if you are having difficulty making sure your iPhone only gets the music you want. In order to do this, you need to manually manage the data that gets synced to your iPhone. This article explains how to do so -
iOS: How to transfer or sync content to your computer
http://support.apple.com/kb/HT1296
Specifically -
Syncing manually
If you prefer not to automatically sync content to your device, you can set up manual syncing:
Connect your device to your computer and open iTunes.
Click the Devices button in the upper-right corner. (If you're viewing the iTunes Store, click the Library button in the upper-right corner. The Devices button will appear.)
In the main iTunes browser window, select the Summary tab.
Select the option to Manually manage music and videos or Manually manage music. This will deselect the automatic sync settings for the Music, Movies, and TV Shows tabs.
Click Apply.
And -
After following the steps above, you can add individual songs, videos, and playlists from iTunes to your device. To add content to your device:
Select your device.
Click On this Device.
Choose Add to in the upper-right corner. If you drag a song, video, TV show, or movie while viewing the media in your iTunes library, a sidebar will show up on the right. You can drag your content onto the device. You can also create and modify playlists directly on the device.
Thanks for using Apple Support Communities.
Best,
Brett L
Thanks for using Apple Support Communities.
Best,
Brett L

IPad and iPhone Bluetooth issues

Help!
I have an iPad2 and an iPhone4s and neither of them will discover the other.
In addition they won't discover any other Bluetooth items, although my iPhone will pair with my car Bluetooth for some reason and will find other car Bluetooth devicesIt's all very odd!
I have a Bluetooth keyboard but my iPad won't discover that either. I've tried turning off but make no difference.

4. Once you do this, your keyboard will show up under Devices and say Not Paired. - See more at: http://www.tech-recipes.com/rx/5772/ipad-how-to-pair-connect-any-bluetooth-keybo ard/#sthash.FZlCTbkx.dpuf
Hhi,
I have 2 Ipad 4th Gen tablets.. neither will discover anything. I turn on Bluetooth and it just searches forever, but never discovers anything. I can turn both tablets Bluetooth on and neither one even finds the other.
I tried turning off the airdrop thing, and still nothing.
Is there a config file or something? Im actually an experienced Windows/Linux developer, never used Apple products before now and am suprised there is really nothing that can be done to anything. I feel like Apple is treating us like untrusted kids lol

TS2972 apple tv and iPhone library issue

hi,
I have an apple tv set up and I can see my computers library on the list on the tv, my question is how / can I set apple tv up so that I can see my wife's music from her iPhone on apple tv?

Welcome to the Apple Community.
You can't.
Use your wife's phone to AirPlay the music to the Apple TV.

Itunes and AIM6 compatability issue

so my problem is that itunes opens but it freezes when i try to play a song i just recently installed AIM6 this happened before when i installed it so i removed AIM6. also i have itunes 7.6. can someone help me with this?
Message was edited by: Zachg

Hey there
smrt.neha31,
It sounds like you want to disable the Automatic Downloads from the iTunes Store and App Store on your iPhone. Take a look at the article linked below, it provides information that should help you both enable and disable the feature.
Enable Automatic Downloads - Apple Support
So long,
-Jason

IHome and iphone compatability issue

Similar Messages

Maybe you are looking for