IHome speakers aren't working for radio!

I tried to plug my ihome speakers into my computer, and when they wouldnt work i read the manual, which says not to do that cause it will damage the equipment. And the speakers are really good! It still plays for my ipod, but when i try to play the am/fm radio, there is no sound. Did I completely ruin them or is there hope? If anyone can help i would really appreciate it! thanks!!!

Apple doesn't make iHome. You might try their website for help:
http://www.ihomeaudio.com/

Similar Messages

  • My iPod touch 4g has ruined 3 pairs of my headphones and my speakers aren't working, can I get it replaced for free? Or do I have to pay for it to be replaced?

    My iPod touch 4g has ruined 3 pairs of my headphones and my speakers aren't working, can I get it replaced for free? Or do I have to pay for it to be replaced?

    As I said in my previous reply:
    If defective, Apple will exchange the iPod at no cost unless they have been abused. That applies to Apple earphones too.
    Apple Retail Store - Genius Bar        

  • HP HP 15-r006la speakers aren't working

    I recieved my new laptop but the speakers aren't working. Volume mixer shows activity even though I can't hear anything. When I plug-in my headphones, they work just fine.

    Hi there @Fabmoral 
    Welcome to the HP Support Forums!
    I understand that you are getting no sound from your speakers, but that headphones work fine. I am happy to help.
    I assume you are referring to the internal speakers on the notebook, if I am wrong let me know. With that in mind please take a look at this page:
    No Sound from Speakers (Windows 8)
    Let me know if that fixes it.
    Malygris1
    I work on behalf of HP
    Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
    Click Kudos Thumbs Up on the right to say “Thanks” for helping!

  • Audigy 2 ZS - Rear Speakers Aren't Working

    *Audigy 2 ZS - Rear Speakers Aren't Working-Well, before on XP, just restarting, and re-installing my drivers worked flawlessly.
    Since XP, I've installed W7 x64 Bit, and the rear never worked, but I didn't mind, as I was always using my headset for gaming, but now that I've stopped gaming so much, and listen to music much more, I've been wanting my rear speakers back!
    Anyways, I've tried the nati've, original Creative drivers, no go.
    I'm using Daniel K's right now, no go.
    Any help would be greatly appreciated.
    Here's my rig-
    Windows 7 x64 Bit - Ultimate
    AMD Athlon II X4 620 @ 2.6GHZ
    Biostar A770E3 Motherboard
    Corsair DDR3 333mhz 4GB - Two sticks - Dual Channel
    BFG Tech GTS 250
    Creative Audigy 2 ZS
    600W Power Supply

    I got this problem when I updated to the new drivers, so that might be your problem since you recently updated. Check to make sure that your speakers settings are for 5. and not stereo. Also make sure that the speaker system is set to receive 6 channel input instead of stereo -- I know my Logitech 5500 system can set to stereo even if it is receiving 6 channels in.

  • My sleep/wake button is now not working and than I faced problems with my sound, now my iphone speakers aren't working? What shall I do?

    My sleep/wake button is now not working and than I faced problems with my sound, now my iphone speakers aren't working? What shall I do?

    The problem isn't solved after the restore, shall I bring my phone to the AppStore? Will they give me a new one? Or I should pay for that. Warranty is until December 2013;)

  • HT5278 i did this update and now the volume on my phone doesn't appear when i push the buttons on the side of the phone. occasionally i see them, but my speakers won't work for playing videos or music either. it does ring when i receive a call though! ne1

    i did the ios5.1.1 update and now the volume on my phone doesn't appear when i push the buttons on the side of the phone. occasionally i see them, but my speakers won't work for playing videos or music either. it does ring when i receive a call though, and for my alarm. ne1 else had these problems?

    I have had this happen to me on 3GS, 4 and 4s.   Usually the solution is one of the following:
    1-  If  your volume indicator says  headphones even though they are not plugged in, then:
    Stick your headphones into the headphone jack and then remove quickly.
    2. If that does not work Power your phone off. Then when restarting Reset the phone by pressing the home button and the power button at the same time until the apple logo appears.
    3. Make sure you have not chosen to send audio to an Airplay device such as Apple Tv.
    Hope one of these works for you

  • Can't use audiobooks AND Genius? And VoiceOver not working for radio?

    Anyone know how to resolve this? In order to transfer audiobooks, I have to disable the automatic syncing from my nano. But it seems that this means that I lose the ability to transfer the Genius mixes that are created in iTunes.
    Also, after much hassle, finally got VoiceOver to work, but it only works when I"m playing music that I already have stored and it won't work for songs on the radio... any ideas?

    I'm not sure about the Genius working with audio books, but from what I understand, when you say that you want VoiceOver, iTunes goes through your music list and makes that voiceover prompt for each song thats in their. It can't do that with the radio because the songs aren't preinstalled on the ipod.

  • Speakers are only working for a few seconds at a time

    Hi,
    My hard drive crashed had it replaced by apple.  They did that and put the lion operating system on it....... now i have speakers that work for only a few minutes or sometimes not at all.... when I go into settings it is telling me that i have no outputs to select.... i am not overly computer savoy any help is appreciated.
    thanks

    If this MB was just recently serviced by Apple, I would take it right back and make them aware. Also, read this Apple troubleshooting article: http://support.apple.com/kb/TS1574

  • HP ENVY 17 Notebook My speakers aren't working

    Hi. Can anyone help me? I have recently updated my hp to windows 8.1 64 bits but I hadn't any problem till yesterday. I often hear music on my laptop and yesterday I plugged (for the first time since I have the laptop - it has a month or two) my headphones. The music was sounding different from the way I was used to hear on the laptop and so I disconnected them. After that I pressed the play again but I didn't hear any sound from the speakers. Aparently the are on, the drivers are updated, I don't undestand. My serie number is 5CG3260W51

    Hi,
    Can you post back with the full Model No. and Product No. of your Envy 17 series notebook - see Here for a guide on locating this information.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • My Macbook Pro speakers aren't working and the headphone jack is emitting a red light when I try to play something with sound. HELP!

    The question says it all. It worked perfectly last night and stopped working this morning. A whole day has gone by and the speakers still don't work. I've plugged in headphones and that works.
    When I try to increase volume or decrease volume, it shows me the mute sign which makes no sense at all. When I try to unmute, it stays muted.
    HELP I'M ON THE VERGE OF BREAKING THIS P.O.S. LAPTOP

    SO I just now had the same problem. A million threads online suggested to try inserting headphones, toothpicks, or even qtips to try and switch the "switch" inside the headphone jack. Everyone had great results from using the toothpick method. Well that didn't work for me. here's what FINALLY WORKED!!--> I wrapped a toothpick in fashion tape (fashion tape is basically stretchy double sided tape. If you don't have any ask some girls and someone will have). My thought was that maybe this "switch" didn't need to be flicked or pushed like a button. Maybe it was stuck in like a button that has been pushed in. I used the sticky toothpick to pull up the button/switch. Basically, take the toothpick and pressdown on the switch (supposedly the botton is inside the jack at the 6 or 7-0clock position) and then press the toothpick away (so that you are pushing in the opposite direction [1-oclock]). do this multiple times so you're flicking the toothpick back and forth. Just make sure you press firmly enough in the 6-oclock position so the tape can get stuck to the button.
    Two tips for this method:
    1) I had tried a manicure q-tip first, which in hindsight could've cleaned out the headphone jack, facilitating a surface that can get stuck to the fashion tape effectively.
    2) You can see in the photo attached that I wrapped the tape on the toothpick a little past the edge so that there was extra tape on the end of the toothpick. That was (and this is just my theory) to make up for the fact that toothpicks have a tapered end. I figured that having this extra loose bit of tape at the end would allow me to reacch into any nook or crany of the headphone jack where this mysterious "button" might be lurking.

  • Previous replies here that solved the "dll initialization routine failed" problem for others aren't working for me.

    Hello everyone,
    I place the DLL, LVLIB and all the VI files from a VXIPnP LabVIEW instrument driver folder-tree under the "instr.lib" folder under the LabVIEW 8.2 installation folder, like I've always done before with no issues.
    But because this particular Windows XP lab-PC has a strong level of file-system lock-down, only the administrator is able to drop driver-function icons from that driver VI set into a LV 8.2 block diagram without "dll initialization routine failed" pop-ups, which is what always happens for all "domain users" who log on this system.
    If I go to another XP PC (my laptop) with the same LV8.2 and driver-folder configuration under instr.lib, there is no problem with attaching to this driver DLL at all when building VI's with those driver functions. That system allows "everyone" permission to all file and folder write operations, all the way down the NI folder tree (scary, I know, but the same IT guy set it up that way, perhaps because this is a laptop).
    I see there are two other threads in this forum giving possible solutions to this by setting the permissions on the \Program files\National Instruments\ folder (only) to allow all domain users write-permission on that folder (even though no files are apparently written to that folder). But this isn't working for me, or perhaps I'm doing it wrong. My IT guy will not allow me to open up all the permissions under the NI installation folder for domain users or everyone (like the laptop has), so I don't know if this would solve it, or if certain branches of the NI folder tree are the specific ones that need this done to them instead of others.
    Does anyone out there have a solution for this? Is there something specific in this NI folder-tree that has to have specific permissions opened up in order to make this work?
    I am burning way too many hours trying to solve this...
    (I wonder if this would get worse once Vista is prevalent)
    JB
    To whom it may concern: My alias is also my nickname, I've had it since I was a (very) skinny basketball-playing teen. OK, so I've got a 38 inch waist now, but my hometown friends haven't shaken that appellation for me. I trust that you will someday be OK with that alias, as I have been with that nickname.

    No, just tried that, didn't fix it, thanks for the advice though. I though it might have been DEP (Data Execution Prevention) which was turned on for this machine. But it wasn't.
    I did discover that some drivers do it, and some don't. It must have something to do with the way the DLL is linked into the LVLIB file.
    Is there a white paper or a location in the help file that explains how the DLL shared libraries should ideally be arranged in the *.lib folders in order to work properly?
    JB
    To whom it may concern: My alias is also my nickname, I've had it since I was a (very) skinny basketball-playing teen. OK, so I've got a 38 inch waist now, but my hometown friends haven't shaken that appellation for me. I trust that you will someday be OK with that alias, as I have been with that nickname.

  • Speakers don't work for some apps (eg Orange TV)

    when runing some TV Apps on my iPAD2, no sound comes for the speakers. I need to use my earphones.
    It used to work until this morning......but I cannot get it working anymore.
    Any suggestions ?

    Have you got notifications muted, either by the switch on the right-hand side or via the taskbar, depending on what you've got Settings > General > Use Side Switch set to ? More info here http://support.apple.com/kb/HT4085

  • Notifications aren't working for Mail on iPad mini

    Notifications is working fine on my new iPad mini, except for Mail.  Mail on my iPhone 4 running iOS 6 works great but not on my new iPad mini running iOS 7.
    When an email comes in on my iPhone while it is OFF I get notified with an Alert.  On my iPad I get nothing.  On my iPhone while I'm using an app I get an email Alert pop up that either has to be Read or DISMISSed.  On my iPad I get nothing.  On my iPhone the Badge App Icon works to show the number of Unread messages as soon as I turn it on and look at the Home Screen.  On the iPad I get nothing until I open Mail and wait for the mail to come in.  THEN the Alerts start popping up and the Badge App Icon starts working.
    On both devices I have three POP email accounts with my ISP, and one IMAP Gmail account.  I've compared Notification settings between the two devices and they are the same.  Settings > Notification Center > Notification View is ON (Green).  In Mail each account is set ON for Alerts, Badge App Icon, Show in Notification Center, Show on Lock Screen, and Show Preview.  In "Mail, Contacts, Calendars" I have Fetch New Data to Push and the next screen I have Push ON and each account set to Fetch.
    I got the iPad mini a couple of days ago and was running iOS 6.  After I added my email accounts I noticed that I was getting email Alerts on my iPhone but not on the iPad.  I checked all the settings and finally I upgraded yesterday to iOS 7 thinking that would fix it the problem.  It didn't.
    I've tried rebooting (holding the On/Off button until I get the "Slide to power off"), and even did a Reset All Settings.  Those didn't work either.
    What am I missing?

    While waiting for someone to offer help I continued with my own troubleshooting, feeble as that may have been.
    I thought I had done the basic stuff already with no success, like rebooting and resetting, so I tried deleting accounts, one at a time, to see if maybe notifications were stuck in one and affecting the others.  That didn't work.
    After deleting all accounts, I waited an hour or so, and added one account back, starting with my Gmail account.  Notifications began working!  I added another account and that one worked also.
    Finally, with all accounts back in the iPad notifications are working like they should!

  • Airtunes speakers don't work for tv shows or movies

    I am disappointed that I can't figure out how to play movies or tv shows through via air tunes ad speakers connected to my airport extreme. Am I missing something? Works with music, just not video. Duplicated problem with itunes on both mac and windows.
    Seems there are some utilities like airfoil that allow me to make this work, but the video is not in sync and the airfoil video player doesn't recognize itunes video.
    Ideas?

    No, you're not missing anything. Because of the inherent lag between audio and video, apparently, Apple made the choice simply to disable the possibility. Sorry.

  • Reset  Button is Not Working For Radio Buttons In Expand to fit Forms

    Dear All,
    I have a dynamic form in which text fields height is set to expand to fit.The functionality of the reset button is working fine if none of the field expand during filling the form but during filling the form if any fields height expands and then we want to reset the form, all fields are getting refreshed but the radio buttons are not getting refreshed.
    I have also tried by writing script on the click event of the reset button to make the rawvalue of the radio buttons as null.Even though it is not working.
    I am usuing Reader 7.0 to open the form.Is there anything wrong in this reader version or is there any other problem?
    If any body can please help me.
    Thanks a lot in advance
    Regards
    Rakesh

    Check on the Property Palette of the radio_group the Navigation->Keyboard Navigate atribute.It must be Yes.

Maybe you are looking for