Ihome

I don't know if this is the right place for this, but this is for those with the Ihome. Just recently my system has been turning on with out making any contact wiht the remote or the system bottons. I have replaced the batteries in the remote and the system itself, and even moved the system to a different plug but it still randomly turns on. I was wondering if this has been happening to anyone else. It anoys (spelling) the S**t out of me. It is past the warrenty, and i dont feel like paying 100 dollars to have it fixed. Any suggestions??
Sony Vaio, Dell XPS   Windows XP  

so i'm the only one that this is happening to.......??!?!?!?!?!?!?

Similar Messages

  • IPod No Longer Works In iHomes H5

    Since I updated to the latest version of iTunes, my iPod doesn't work in my iHomes H5. I've tried three H5s, and it doesn't work in any. However, my wife's nano works fine in our H5. Also, I've taken my iPod to two different electronics stores for diagnostics, and both told me my iPod connects just fine. In fact, I tried it in several different speaker systems, and it works just fine--the only product it doesn't work with is the H5. It sounds like something in the update is blocking my iPod from working with the h5. Has anyone else run into this problem? Any suggestions? Thanks in advance.

    Just to close this out, I brought my iPod to the Apple store and confirmed that my connection and software seemed to be fine. It looks like the problem was actually with the radio. While my iPod still didn't work in the h5, it worked fine with the new h6 so I upgraded. Anyone else who is having trouble with the h5 might want to consider upgrading.
    Bill

  • How can you get your ipod to play music on your ihome?

    I can't get my ipod to play on my ihome is says this accesssory is not supported by ipod touch!

    If it started after updating to iOS 5 it may be that the dock is not compatible with iOS 5.  Somebody else recently posted with the same problem after iOS 5.

  • Can I use my new iphone 5 with the old iHome iD9SVC Speaker System if I get an apadter? or should i just buy new speaker system made specifically for the iphone5

    can I use my new iphone 5 with my old iHome iD9SVC speaker system if I get an adapter? or should i just buy a new speaker system made specifically for the iphone 5?

    Look iTunes>Preferences>Devices...is a backup listed for your iPhone 5 dated BEFORE you restored your iPhone 4 backup to your iPhone 5? If not, your data is gone. If there is a backup, on your iPhone 5: Settings>General>Reset>Erase All Content & Settings. You should now be able to restore that backup, if it exists, to your iPhone 5.

  • So my Ipod will no longer turn on. i leave it on my Ihome and nothing happens. whenever i try to turn it on i get the Apple logo and then it dies and says i should charge it, so i do and it does it again. What does this mean? is my battery totally dead?

    So my Ipod will no longer turn on. i leave it on my Ihome and nothing happens. whenever i try to turn it on i get the Apple logo and then it dies and says i should charge it, so i do and it does it again. What does this mean? is my battery totally dead? please i really need help

    Did you try to charge it using the adapter or your computer?
    If you can, let it charge for about 15min, then connect in recovery mode, described in this article:
    iOS: Unable to update or restore
    If still not luck, your battery might have to be replaced:
    Apple - Support - Service Answer Center

  • Ipod touch 1st generation won't play on ihome doc

    I have a 1st generation ipod touch, 32GB.  I received an iHome for Christmas last year that states it is compatible with the 1st generation ipod touch however when I put it in the cradle, it connects and disconnects over and over.  I looked and iTunes stated that there were no updates available for my ipod.  I thought the iHome was defective so I exchanged it for another one and it does the same thing.  The iHome does play with the 2nd generation iPod Nano so I don't think it is an issue with the iHome.  Anyone else have this problem and know how to remedy it?

    - What iOS is on the iPod?  The latest is 3.1.3 and yu get that here not via the iTunes update button.
    Purchasing iOS 3.1 Software Update for iPod touch (1st generation)
    - Have you tried the standard fixes:
    - Reset. Nothing will be lost.
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore to factory defaults.

  • HT1665 Why does my ihome no longer work properly since my iPod update

    My ihome no longer works properly since I updated my iPod to the most current software update. Is there a fix?

    Sometimes thisworks:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                                                                
    - Restore to factory settings/new iOS device.             
    However,sometimes an iOS update breaks compatibility and you have to wait for either an iOS update or and update to the iHome firmware. Go to iHome's support site

  • I have the iPhone4 and ever since I updated the phone, I can no longer connect it to my iHome (iD8)

    I have the iPhone4 and ever since I updated the phone, I can no longer connect it to my iHome (iD8)

    Yes, they told me I should contact apple, but apple hasn't helped me either! The iHome has worked perfectly all along and it still is working it has power just will not connect anymore to play my music.

  • IHome no longer works with iPhone 4s after iOS 6.1 update.

    My iHome no longer works with iPhone 4s after iOS 6.1 update.  Prompts message 'This accessory is not supported by iPhone'.  Has anyone come accross this and is there a fix?

    Ring up iHome and ask them for a fix... And if they cant supply you with a fix... Then you should be entitled to a replacement or a upgrade, as firmware upgrades on your ios device should not affect audio products......

  • Nano no longer charges on iHome

    So, my nano stopped charging on my iHome 5. I can dock it and play music on it, but it fails to charge. Any idea what I can do?
    Thanks.

    No suggestions. Sorry. But to share the pain. 4 must be the Vista of Apple. Since upgrading my 3gs gets physically very warm, which never happened before. I can't leave the phone charging connected to my notebook via a USB cable, which I could always do before: the phone actually drains. The multitasking feature is lousy: every app I run stays on, I can't control what is running unless I physically turn off the app, which is a design defect. How do I return the phone to the old OS unless and until Apple gets its act together?

  • Pandora no longer works on my ihome, but it is playing on my ipad.  What gives?

    Pandora no longer works on my ihome dock although it is playing on my iPad.  What gives?

    Liz,
    I'm new to this device.  I determned that I merely needed to reset my iHome.  Thanks for your response.
    Gordon

  • IPod Touch 4 will not play music through iHome iP37

    My new iHome works with my iPod Touch 1st gen but when I plug in my 4th gen everything works but the sound comes out of the internal speaker and not the iHome speakers. I would love any ideas.
    Thanks,
    ipodkidspokane

    I'm having the same problem on 2 different ihome clock radios. My classic ipod works fine, but the ipod touch music comes out the ipod touch speakers only. What gives?
    Eric

  • Ipod Nano video and Ihome to go(26)/ unable to wake to music???

    Have a new nano video and the Ihome 2 go model 26. Have it set up correctly and all functions work on the Ihome except wake to music, it buzzes. You can go to sleep with music but can not set it to wake to music. Contacted Ihome support and they say a fireware update is needed from Apple. Anyone know anything about this? Thanks.

    Hi, Plugged in nano, checked software and it said no update needed. I just want to clarify iHome customer service said this is a current known problem with my iHome guess I will be emailing Apple to see if I can track down an answer. Thanks

  • Does the ipod video work with the original ihome?

    does the ipod video work with the original ihome?

    Welcome to Apple Discussions!
    If you mean this one...
    http://www.ihomeaudio.com/products.asp?productid=10015&deptid=1003
    Them yes. I am using one myself. You may want to purcahse these if it does not come with them (depending on how old it is)
    http://www.ihomeaudio.com/products.asp?productid=10016&deptid=1000
    btabz

  • My ipod wont work with my ihome anymore plz help

    my ipod sounds fine with the headphones and with other speakers, but as soon as i put it on my ihome it wont work, yet it still will charge on there it just wont play music. plz help!

    do you have the conncetion right..because i have a ipod and iwake so the speakers might of gone bad..i am not sure but try plugging a cd player or something in the back of the ihome

  • IHome iP92 no longer works

    I received an iHome iP92 alarm clock for Christmas in 2011.  It has worked great until today.  This moring instead of waking up to music from my iPhone 4 I woke up to beeping.     Now I get a message when I plug the iPhone into the device "This accessory is not supported by iPhone".
    I talked with a Verizon rep and they said I should dail *228 to update the programming as it had not been done for awhile.  So, I did that, still have same problem.
    I have powered the phone off, multiple times.  I have also reset the iHome iP92 by unplugging it and removing the batteries as the documentation says.
    When I plugged the iPhone into my car stereo, I was able to charge the iPhone, control it, and listen to music so I am pretty sure there is nothing wrong with the phone.  Not sure if the update to i/OS 5.1.1 would have caused any issues or not.
    Anybody have any ideas as to why this would be happening?

    Thanks for the idea, I will be trying that tonight when I get home from work.  I must say I was pleasently surprised by SDI Tech (maker of iHome).  I sent them a customer service email and I received a reply within an hour stating I should send the unit in for service.  I will be trying the toothbrush idea before I send it in though.  Hoping I only have to pay for shipping and not for servicing the device.

Maybe you are looking for

  • Automatic Deployment Rule - One ADR for Two Different Collection for Two Different time Intervals

    I have a scenario where two collection of Windows 8.1 is made based on geographical location. One collection is for all the windows 8.1 machines in India and one collection is for all windows 8.1 machines in US. Now I have created one ADR to be deplo

  • How to save precious memories to edit later in iMovie'09?

    Here is a site to help others who want to save their own family memories in iMovie'09 form - Events, Camera archives in AVCHD codec form, so that they can be edited later, as well as creating photos from stills. The-Archiving-Grammy.com Take a look.

  • Dubug In Jdeveloper 10.1.3

    Hi , Does anybody knows how to debug in JDeveloper 10.1.3 because, i tried to put breakpoint in the .java files its showing me breakpoint mark, but while debugging the code , it execution not halt at the breakpoint. Is there any setting that i should

  • Adopt Toolbarfunction in PDF-Viewer

    By using the Methods of Class CL_GUI_PDFVIEWER it was possible to exclude some funtkions from the Toolbar of Acrobat Reader, for e.g. to prevent User from printing the document. Since an upgrade of the SapGui Software the Class internally automatical

  • Error while connect SAP from Home

    Hi all Experts, I want to connect my SAP from HOME. When I connect from OFFICE, it got connected, then Why it should not connect from Home. Is there any particular settings to get connect from Home. & I'm getting an error while Logging to SAP System.