IHP F2210 all in one deskjet, need to print in black, but prints in color

My HP F2210 all in one deskjet, is having printing issues. When I set it to print in draft in black ink only, it then prints in color, I just don't understand WHY, can anyone offer assistance?
thank you
miricro

Hi there miricro,
This article should cover the issue you are experiencing. Give the steps outlined a shot and let us know if it helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Similar Messages

Need installation cd for a HPF335 all-in-one deskjet printer.

NEED INSTALLATION CD FOR AN HP F335 ALL-IN-ONE DESKJET PRINTER. WHERE CAN I GET A COPY?

Hi,
Yes, the installer is downloadable - just select your OS on the link below, open up 'Drivers - Product Installation Software' and download the Full Feature installer.
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&dlc=en&lang=en&lc=en&product=1153494&task=...
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

HP 4515 ALL IN ONE DESKJET PRINTER NOT SCANNING

I HAVE
OS:WINDOWS 8.1 32-BIT
PRINTER:HP 4515 ALL IN ONE DESKJET PRINTER
OVER THE PAST FEW DAYS MY PRINTER HAS STOPPED SCANNING DOCUMENTS
THE MESSAGE "NOW SCANNING" KEEPS ON COMING
EARLIER IT WAS SCANNING DOCUMENTS BUT NOW IT HAS STOPPED DOING SO
ANY SOLUTIONS?
This question was solved.
View Solution.

hI @ARYANPRINJHA ,
I see by your post that you are unable to scan. I can help you with this.
Download and run the Print and Scan Doctor. It will diagnose the issue and might automatically resolve it. Find and fix common printer problems using HP diagnostic tools for Windows?
How is the printer connected? (USB/Ethernet/Wireless)
What were the results when you ran the Print and Scan Doctor? (did it print or scan, any error messages)
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP Deskjet all-in-one F4440 will not print

My HP Deskjet all-in-one- F4440 will not print. I have put in a new color and a new black cartridge. It clanks loudly when it moves back and forth. Finally it stops and then pulls plain paper through as though printing on it - does this two or three times. then it pulls plain paper halfway through and stops. I have to tug and carefully pull halfway paper back out towards front to remove.

Hi there,
Could you provide the community with a little more information to help narrow troubleshooting? Are there any error messages or flashing lights? What operating system are you using?
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

I need to scan wirelessly from a MAC (OS 1.7 or higher) through Adobe Acrobat Pro X (or higher). Have discovered that all in one printers say they are MAC compatible but will only scan when connected with a USB cable. Would prefer a laser, color, all in

I need to scan wirelessly from a MAC (OS 1.7 or higher) through Adobe Acrobat Pro X (or higher). Have discovered that all in one printers say they are MAC compatible but will only scan when connected with a USB cable. Would prefer a laser, color, all in one. Does anyone have printer suggestions that you know will scan wirelessly?

Great information.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Paper jam all-in-one deskjet BUFFO

I am a real newbie - have never done this before - can someone tell me how they fixed what seems to be a common problem?
I have a HP All-in-One deskjet F4440 - it will not print anything on the first and sometimes second paper. It just quietly pulls them through and puts them out blank. Then the next paper gets stuck halfway as it is being pulled through and stops. I have to pull it firmly and gently out towards me to release it. I have new cartridges in the the machine. It worked just fine for a few years and now this!! It also makes some "noise" that it never made before - like a clanking when the cartridge carriage moves bak and forth. Your help will certainly be appreciated. Thanks Ardna Fox

Hi there ardna,
This article covers paper jams and should resolve you issue. Give the steps outlined a shot and let us know if it helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

My eprint on my all in one deskjet printer 3050 j611a is not lighting up help

My eprint on my all in one deskjet printer 3050 j611a is not lighting up help

HI Michele100,
Welcome back to the HP Support Forums. I understand the ePrint light on the front panel of your Deskjet 3050A J611 printer is not lit up.
To better assist you, would you please supply some further information:
How is the printer connected (USB cable or wireless)?
What operating system are you using on your computer? whatsmyos.com
Are you getting any error messages? If yes, what do they say?
Is the printer plugged directly into a wall outlet?
Thank you.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

HP all in one J4550-won't print blue

I have a 5 month old printer, HP all in one J4550. Last month we put in a new color cartridge (from Rapid Refill, a very reputable place for re-manufactured ink cartridges) & now we are totally missing one color, blue. I have gotten a replacement thinking it was the cartridge and am having the same problem. I have done all of the cleanings and I've even swabbed the contacts with alcohol. Any other suggestions? Is it possible that the remanufactered cartridge ruined something? Help!!
Thanks everyone

When you say commands what do you mean about that? Like it wont print? Or wont scan?
Please let us know.
I do work for HP. But i speak for myself.
Click the Kudos star as a way to say "thank you" for helpful posts.
Be sure to come back and click the 'Accept as Solution' button on the post that solved your issue - it may help someone else.
For more information you can always check the RULES FOR PARTICIPATION

Error code B81AA24C on my officejet pro L680 all-in-one ... can printer be fixed? how??? thanks..

error code B81AA24C on my officejet pro L680 all-in-one ... can printer be fixed? how??? seems to not power up ...thanks..

Hello
Is it possible to do a reset on the unit? Via: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00841912&cc=us&dlc=en&lc=en&product=2512009&tmp...
To try to get it in default mode
Kind regards
Best regards,
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"
Although I work for HP my posts and replies are my own .....

Any suggestions for an all-in-one "cable modem router print server" (N)

any suggestions for an all-in-one "cable modem router print server" (N)?

If that's a problem with your cable company, change the company.
If your cable company is not able to provide you with a cable modem which gets you full performance for their service why would you bother with that company or try to make it better than them?
If you subscribe to a 100 Mbit/s service they must be able to provide you with a modem that does 100 Mbit/s and be able to demonstrate you 100 Mbit/s on your cable.
If they are unable to provide you with a modem which does 100 Mbit/s and thus cannot demonstrate that the service they have installed in fact can do 100 Mbit/s but only give you a 50 Mbit/s because that's the best they have, why bother buying yourself a better modem to find out whether or not their service does what it promises or not??
In addition, an integrated device won't get you better performance. On the contrary, consumer devices are generally single CPU (and core) devices. It's usually running some Linux or similar. If a single process gets overloaded it can drag down the performance of the whole device. For instance, let's say there is a bug in the print server software of the router. You print something and it hangs and the print server process on the router runs wild. Now the CPU is fully loaded and the routing performance will go down. If there is a bug in the routing software it will bring down the whole device and you can't even print.
You'll get the best performance if you use dedicated devices because then one device cannot overload another. Get a modem. Get a wireless ethernet router. Get a printer with integrated print server. That's far better.
It's like the all-purpose audio device compared to components...

F2210 all-in-one question

I need to clean the inside of the glass on my F2210, and I need a Torx scredwriver to get into it. I currently do not have any, will have to buy one. Does anyone know what size Torx it takes?

HP Pavilion 23-1027c All-in-One Desktop PC :: Support Page
http://h10025.www1.hp.com/ewfrf/wc/product?cc=us&lc=en&product=5293048
Achilles -
FIRST, a bit of Situational Awareness (SA) and Future Vision (from the hardware mfg.).
PURPOSE Built Computer Appliances ---- Like Laptops, Tablets, Smartphones, are here Today and Extensive Tomorrow.
They are NOT Upgradable. The All-In-One Form Factor is like a BIG SCREEN Laptop or Tablet.
SECOND, READ this Gigabyte All-IN-One (AIO) How To DIY Build Guide
http://www.gigabyte.com/MicroSite/324/images/AIO_howe_to_guide.pdf
WATCH the You Tube Video -- Gigabyte AIO Build
http://www.youtube.com/watch?v=eNL6DuBtFNg
The All-In-One Form factor (Thin ITX, Femto ATX, or Custom Motherboards) present a Special Challenge for Graphics Upgrades
Intel's Thin Mini-ITX Design Component Catalog (PDF)
http://www.intel.com/content/dam/www/public/us/en/documents/catalogs/thin-mini-itx-catalog.pdf
FUTURE (2015 and Beyond)
NEW Processors (CPU) to be released, starting with Intel "Skylake" (mid-2015), that will be INTEGRATED into the motherboard (System on a Chip), these motherboard/CPU are NOT UPGRADABLE.
Intel "Tick-Tock" Strategy / Roadmap, started in 2007 for their CPU (and integrated graphics)
http://en.m.wikipedia.org/wiki/Intel_Tick-Tock
The Graphics Processor Unit (GPU) led by NVIDIA and AMD (old ATI) have their own roadmaps
for the Entertainment and Gaming Industries.
I would expect that they will have their Own Purpose Built Gaming AIO .... with their GPU.
WATCH Consumer Electronics Show, Las Vegas (January 2015) for any announcements.
====

Hp Deskjet Ink Advantage 2060 All-in-One K110 series Bad Print Quality

Hi! I am an avid fan of Hp printers since I was a kid. It is the family's most trusted brand for printers. Our printer worked just fine until I printed a colored page. When printing an all black page, the print is ok. For the colored output, the picture has some shadow/3D effect in it that I can't understand. It makes the picture unrecognizable. I tried troubleshooting but doesn't work. I am using Windows 8 and have been searching the net for solutions and etc but could not find one. I wanted to print an alignment page, clean the cartridges and stuff but could not find the Solution Center just like in Windows 7. Please help me. I badly need it. I have an important document that needs to be printed. My future depends on this one, literally. So please help me. I am begging you. T_T

Hello I_Am_Lost, Welcome to the HP Forums. I see that you are having an issue when attempting to print due to bad print quality. I do have a few suggestions that we can try in the attempt to resolve this issue. First off, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector. I have also located a troubleshooting document that deals with HP Deskjet Ink Advantage 2060 (K110a) All-in-One Printer - Troubleshooting Print Quality Issues. If the troubleshooting does not help resolve your issue, I would then suggest contacting HP's Technical Support to see about further options for you. , : click here. Thanks for your time. Cheers,

HP Deskjet All in ONe L7650 will not print black only --

Started doing this with previously working black cartridge, updated software--prints, but blank page comes out when set to black ink only; prints other colors.
Changed black print cartridge and still will not print black. Diagnostic page prints other colors.
Printhead health shows good for all colors.

What brand of printer cartridges (not printhead) did you use the last time you changed them? I don't know if it was because one or both of my printer cartrdiges went dry, but I put new cartridges in (not printhead) and it improved somewhat--I kept trying to clean the printheads but it seemed to never get resolved.
I refuse to have to buy new printheads. I tried several cycles of "align printheads" "clean printheads" and never got a decent print out, but I did get to the point of all the colors printing although magenta printhead makes printing errors and so I never know what I am going to get with color anymore.
It seems to be at its worst when printing in "draft" but in normal or best (with more ink coming through) it seems better--the higher ink volume seems to cover some of the problems with the printheads.
So, I am justing using it "as is" and not replacing the printheads--because it is a waste and yes, could almost get a new printer for this cost.
I wish I had never gotten this All in One and just stuck with the old 970 csi and the old UMAX scanner, which was a better scanner, but thought I would "save some space" by getting this since it scans legal, which I needed.
Just keep trying to reseat the printheads (also trying to reclean them, which seems to make it worse) and keep printing out those "tools" alignment and cleaning procedures.
But no help from HP.

6310 All In One - Crashes IE7 when printing, (hpzui054.dll?)

I am calling on all you HP experts out there to assist me with a problem I’ve been experiencing with an HP Officejet 6310 All-in-One printer. What happens is the employee will be printing web based reports from Internet Explorer. She will click Print from the file menu and make some preference settings (draft mode, BW printing, fast printing). The print dialogue box appears fine and she can make those preference changes, however, it is when she presses the print button that she witnesses the error. What happens is, IE7 will crash (IE has experienced an error and must close…). Her IE windows will close and the printer will not print the page. She commented that she “knows” when the crash is about to occur because after pressing the print button, nothing happens for a few seconds, then IE crashes. This is not every time she tries to print. She may print (the exact same website) 5 or 6 times in succession and it will print fine. Then, out of the blue, it crashes. In one instance, she received an IE crash when she clicked the “Preferences” button in the print dialogue box.
Printing in Word and Excel has not appeared to cause this problem.
System Specs:
The laptop experiencing the problem is a Dell E6400 32bit system running Windows XP SP3 with 2GB of ram and an 80gb hard drive and Internet Explorer 7.0. It has all critical updates as of the week of the 23rd (Februrary). .Net frameworks include: 1.0, 1.1, 2.0, 2.0 SP2, 3.0 and 3.5. The laptop is a fresh install, and the employee commented that this problem happened on her original laptop before it was recently upgraded.
Driver version is the latest (7.0.1), right from HP’s support website. Connection method is USB.
What I have tried so far:
Uninstalled and reinstalled the printer using the included factory driver CD.
Uninstalled and reinstalled the printer using the FULL driver package from HP’s website
Uninstalled and reinstalled the printer using JUST THE DRIVER from HP’s website.
Attempted to print without selecting advanced preferences (Fast draft, BW printing, etc)
Errors details obtained during the times the crash occurred:
AppName: iexplore.exe        AppVer: 7.0.6000.16791       ModName: ntdll.dll
ModVer: 5.1.2600.5512         Offset: 000429fa
I hit properties, then features, and error came before I could select fast draft.
AppName: iexplore.exe      AppVer: 7.0.6000.16791     AppStamp:4949c35a
ModName: ntdll.dll      ModVer: 5.1.2600.5512      ModStamp:4802a12cf
Debug: 0       Offset: 000429fa
AppName: iexplore.exe      AppVer: 7.0.6000.16791     AppStamp:4949c35a
ModName: hpzui054.dll      ModVer: 60.54.45.0      ModStamp:443a1824f
Debug: 0       Offset: 000d3a9e
Our corporate issued laptops contain a “core” base group of programs (Office 2003, Adobe Reader, Vipre Antivirus, Sun Java, Google Toolbar). We try to keep them clean of any unnecessary programs that may conflict.
*Mention*, I have “Data Execution Prevention” on for Explorer.exe file. I understand there was a bug a while ago that caused certain HP printers to print blank pages if this was enabled. Not sure if it’s the same here.
Hopefully the information I provided helps lead towards a fix for this rather annoying bug. Reinstalling the operating system and/or reverting back to IE 6.0 is not an option. The employee was reporting this problem with an older corporate laptop she was issued and I wanted to wait and see if the problem carried over onto the new laptop, which it did. Let me know if you need any additional information from me and I thank you in advance.

I have had no luck in troubleshooting the problem with the HP 6310 driver. After doing some reading on the forums, I was pointed in the direction of using an alternative driver. The forum poster recommended using the HP DeskJet 990c or HP DeskJet 5940 driver. I tested both of these alternate drivers out and they sent print jobs just fine. Below are instructions on how to setup an alternate print driver (using the 990c driver). Those wanting to use the 5940 driver must download and install that driver first, then follow the steps. The 5940 driver offers some advance features (such as "Fast Draft"), that the 990c driver does not.
Step 1: Install an alternate printer driver
To install an alternate printer driver for a HP DeskJet 990C printer, follow these steps:
1. Click Start, Printer and Faxes.
2. Double-click the Add Printer icon. Click Next.
3. When prompted, choose Local, and then click Next.
4. In the Manufacturers list, choose HP.
5. In the Printer list, choose the HP DeskJet 990C printer, and then click Next.
6. Choose LPT1 as the port, and then click Next.
7. The printer name should be listed as HP DeskJet 990C Printer.
8. Click No when the "Do you want your Windows based programs to use this printer as your default printer?" message appears. Then click Next.
9. Click No when the "Would you like to print a test page (recommended)" message appears. Then, click Finish.
Step 2: Configure the alternate printer driver
1. In the Printers Window, right-click the icon for HP DeskJet 990C printer.
2. Click Properties.
3. Click the Ports tab.
4. Click the down-arrow where it says "Print to the Following Port." Select DOT4_00x port that the all-in-one software created. The all-in-one's model number should appear as part of the port destination.
5. Leave the HP DeskJet 990C printer identified as using the following driver, and click Apply.
6. Close the Printer Properties window.
It is still too early to tell if this drive will be a suitable substitute. However the tests so far have appeared promising.

Can't get HP Officejet J6450 All-in-One to scan or print

Hello!
I have an HP Officejet J6450 All-in-One which I would like to use with my Macbook Pro running OS X 10.6.4. I would prefer a wireless setup. It printed wirelessly up until I tried installing the HP Full Feature Software & Drivers from their website (http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-74787-1 &lc=en&dlc=en&cc=us&os=219&product=3635399&sw_lang=)and subsequently deleted them once I realized it did not work. I also did not want to install a bulky and unnecessary set of programs that I do not need.
I went to the System Preferences/Print & Fax and deleted the HP printers that had been added, then I went to Applications/HewlettPackard and clicked on HP uninstall, and uninstalled the program. Since I have experience with Windows (lol), I decided to take the safe route and make sure my HD & permissions had not been corrupted. I put in my OS X install disk that came with my Macbook Pro, rebooted to the disk, went to Disk Utility and Repaired the Permissions (it only had one that it could not fix), repaired the HD (it found a few issues), and then went one more round of Repair Permissions and then HD just to be sure. I rebooted to the HD and ejected the boot disk. I connected the printer via the USB cable.
Then I found this: (http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&dlc=en&cc=us&softwareitem=mp-7 4787-1&os=219&product=3635399&sw_lang=&docname=c01910186) It says on there that Snow Leopard should have everything I need to scan and print with this printer. However, upon trying the three methods, none worked. Here are the results:
Method One: I get to step 2, select Import from Scanner, and nothing happens. The list that is supposed to be displayed in step 3 never comes.
Method Two: I open the Image Capture app in step 1, but when it comes up, it says "No camera or scanner connected."
Method Three: I get the Print & Fax printer browser opened as in step 3, but cannot move on to step 4 because there is no scan tab.
What can I do to get this to work? I tried contacting HP online chat, but they told me they do not offer support to Mac users on there. I sent them an email through their contact page but you know how that will probably go...
I'm an intermediate computer user, although I'm relatively new to Mac, so be easy on me! I'm scared to break this laptop I've fallen in love with. Many thanks to you all in advance, and my apologies if this has already been answered elsewhere - I was unable to find anything with this particular HP model and situation. I noticed HP does not seem very Mac-friendly!

Is this scanning from the PC and/or from the printer? Did it ever scan previously? Is this connected by USB/wired/wireless?
As far as the software, it would be a good idea to update your software, and I would recommend downloading the latest software at this location:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=1153494&lc=en&cc=us&dlc=en&lang=en&cc=us
Just pick the right operating system, and get the download and run it. That may fix the scanning issue you are having.
007OHMSS
I was a support engineer for HP.
If the advice resolved the situation, please mark it as a solution. Thank you.

IHP F2210 all in one deskjet, need to print in black, but prints in color

Similar Messages

Maybe you are looking for