Ihpone 5 Touch screen unresponsive when charging

I noticed my screen became Unresponsive and behaving erratically while it was charging. The charger is an Apple OEM charger. If I unplug it from the phone the screen begins to work normally again.

Hi guys. I was having the same problem. Found this one another thread.
"Update: after my second iPhone 5 immediately had the same problem, again only when charging, I called Apple back. I had been using a third party USB wall plug and they recommended using the factory wall plug. No issues what-so- ever after the switch. They even told me to stop into my local store and they'd swap my third party adapter out with another Apple adapter at no charge. I'm very satisfied."
I'm using a 3rd party plug in b/c I lost my one from Apple. Haven't swapped yet, but it sounds like this might be the problem.

Similar Messages

  • Touch screen unresponsive while charging

    The touch screen on my iPod touch 5 can be sluggish or unresponsive. I've isolated the problem to when I've got it plugged in to charge and the charge is complete but I've not unplugged it. I'm using apple charge cord. Has anyone else had this problem? Obviously when the problem occurs now, I unplugged the iPod. Just wondering if it points to some larger problem I need to have Apple look into.

    Other users have reported the same problem and I made the following suggestions but they nevery posted back:
    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Try another cable
    - Try another charging source
    - Restore from backup. See:                                                
    iOS: How to back up                                                                                     
    - Restore to factory settings/new iOS device.             
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
      Apple Retail Store - Genius Bar                              

  • E7 - screen unresponsive when charging

    The touchscreen on my E7 becomes unresponsive while charging. Essentially it seems to be losing it's accuracy. It stilll works somewhat but you have to tap all over the screen to get a response, and then it's not the one you want.
    I noticed the same on a friend's C7. Anyone else noticed the same.
    Nokia:
     Any help (though no one from Nokia will ever reply anyway...)
    P!
    My Nokia history:
    2110 => 6110 => 8110 => 6310 => 2300 => 2600 => 6070 => E71 => N97 Mini => E72 => C7 => E7 => E6 => 700
    Solved!
    Go to Solution.

    Does this occur when connected to a mains charger, a computer or both ? I tend to get a little slowing down (not innaccuracy) when connected to computer via usb, but no change when connected to mains, can only assume there is some processing going on whilst connected to computer ! It's not somethying I've noticed before, just tried it after reading your post, so I obviously don't see it as a major issue, and this is the first post I've seen on theis subject !
    If I have helped at all, a click on the White Star is always appreciated :
    you can also help others by marking 'accept as solution' 

  • Display touch dont works when charges*

    Display touch dont works when charges*

    Not Charge
    - See:     
    iPod touch: Hardware troubleshooting
    iPhone and iPod touch: Charging the battery
    - Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
    - Try another charging source
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar

  • HT4528 I am having trouble with the touch screen.  When I press - on the glass surface sometimes it doesn't respond back.  I updated my software.

    I am having trouble with the touch screen.  When I press - on the glass surface sometimes it doesn't respond back.  I updated my software.

    This Apple doc might help ya out -> iPhone, iPad, iPod touch: Troubleshooting touchscreen response

  • IPod touch stopped working when charging now won't turn on at all

    iPod touch stopped working when charging now won't turn on at all

    Try in order:
    - After charging or half an hour, reset the iPod:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Connect the iPod to the computer and if it shows in iTunes, restore the iPod via iTunes.
    - See if placing the iPod in recovory mode will allow iTunes to see the iPod so you can restore the iPod. For recovery mode see:
    iPhone and iPod touch: Unable to update or restore
    - Make an appointment at the Genius Bar of an Apple store since you likely have a hardware problem.

  • HP 8620 Touch Screen Unresponsive - Firmware Software Bug?

    Hello, I have the latest "firmware update" on the HP 8620. Can someone please confirm this bug? I don't know if it is just for the HP 8620 or if it applies to all HP touchscreens. Basically if you go into any setting option, then hit the "home" icon and right after you swipe either left or right, it ends up rendering your touch screen unresponsive to swiping left or right. Is this bug already a known issue? The only way to correct the touchscreen so it is responsive again is hit the question mark, or an icon on the bottom and hit the home button (without swiping left/right right after the home button).

    Hi , Welcome to the HP Support Forums! I see that you're experiencing issues with your touchscreen on your HP Officejet Pro 8620 e-All-in-One Printer. I will certainly do my best to help you. Please confirm you have the latest Firmware Version: FDP1CN1502AR. If you do not, please go to HP's download page by clicking here. As far as I know, this is not a known issue with the printer or with the printer's Firmware Update. This could be a glitch in the touchscreen, which a Reset should resolve. Let's start by performing a Hard Reset.Leave the printer on and unplug the power cable from the printer and wall outlet for 60 seconds.Then reconnect the power cable to the printer and wall outlet rather than a surge protector.This ensures the printer is receiving full power and may help this situation.Make sure the printer is connected directly to a wall outlet. (don't use a power bar or a surge protector) This ensures the printer is receiving full power and may help this situation.If you're still experiencing issues, we may need to perform a Semi-Full Reset. I can send you that information in a private message. In the forum beside your handle name just click on the envelope to view it. Please respond to this post with the result of your troubleshooting. I look forward to hearing from you. Good Luck!

  • IPad 4 touch screen unresponsive

    Touch screen unresponsive, cannot unlock device. Replaced touch screen, now I get nothing from LCD display. Triple checked ribbon connectors. Where should I begin looking for solutions: battery, logic board, LCD display? Tries to connect to iTunes, but without display working, I cannot enter passcode.

    I'm sorry, but if you took your own device apart there's nothing anyone here can do to help you. Your issues are a level of technical support that's beyond what's covered here.
    Maybe an unofficial forum would serve your needs better.

  • Ive got an iphone 3gs and im having a trouble with its touch screen because when you sometimes tap it doesent respond?

    i ve got an iphone 3gs and im having a trouble with its touch screen because when you sometimes tap it doesent respond?

    Often a Restart and a Reset will resolve these issues...
    iPhone Reset
    http://support.apple.com/kb/ht1430
    Try this First... You will Not Lose Any Data...
    Turn the Phone Off... ( if it isn’t already )
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear and then Disappear...
    Usually takes about 15 - 20 Seconds... (But can take Longer...)
    Release the Buttons...
    Turn the Phone On...

  • Iphone 6 plus Touch Screen is Unresponsive When Charging

    I just replaced my iPhone 4s with the iPhone 6 plus.  I had several issues with the first 6plus and Apple has already replaced the phone once figuring it was a hardware issue.  (Actually they couldn't figure out the cause of the issues so as a last resort they replaced the phone.)  The second iPhone 6 plus still has an issue with the touch screen becoming unresponsive or erratic while charging.  By erratic, I mean that if the phone is unlocked, I try to open my photos but the phone opens facetime.  Or I try to open the app store and the phone actually opens the settings.  The longer the phone is connected to a power source the more unresponsive or erratic the touch screen becomes.  If the phone is locked, I can't even answer an incoming call or unlock the phone.  Also, it doesn't matter if the phone is connected to my computer or to an outlet.  All connectors (plug and cord) are the ones I received in the box with my iPhone.   The only constant is that the phone is connected to a power source.  It happens both when the phone is charging and if it has a full 100% charge. 
    The problem is solved immediately when I disconnect from the power source.  If anyone has any ideas on what is causing the issue, I'd appreciate the advice.

    Thank you for the advice.  Unfortunately, this did not solve the issue.  In the weeks since my original post, I've tried three different apple cords and a charging cord made by Duracell.  I've tried two different apple wall bases and a generic brand wall base.  I've tried different different power sources too.  Plugging into different wall outlets, different computers, the USB connection in my car and used an adapter to plug into the 12v connection in my car.  I had thought maybe the computer could contribute to the issue so I even tried the computer when I simply turned it on but did not log on.  While the phone was charging, it still didn't fix the issue.

  • IPod Touch 3G unresponsive when not charging

    When i plug my ipod touch 3g into my computer or my charger, i can use the touch screen, home buttons, volume controls, and launch apps fine. When i unplug it, all of the buttons and the touch screen become unresponsive. If i touch on an app while it is unplugged and then plug it in, the app will open as soon as it is plugged in. If i hit the lock button then plug it in, the ipod will lock then instantly unlock.
    Ive tried restoring several times, started as new ipod, restored from backup, reset all settings, deleted all data, the whole shabang. I got the ipod today and it was doing this out of the box. Firmware is 3.1.1
    Message was edited by: Tsb123

    Yes, the battery charges when it is plugged in and i tried letting it completely charge, go dead, then charge again and it still doesnt work.
    I mainly posted it here because i really dont want to have to return it. I ordered it from the apple store online and the closest retail store is almost 200miles away . But its not lookin like i have much of a choice.

  • Touch Screen unresponsive after iOS 8 update

    My 1 year old 64GB iPhone 5 touch screen started to become unresponsive after iOS 8 update
    It's not consistent. Touch screen functionality will seize whilst phone is being used for either answering calls, typing messges, surfing, gaming etc and won't become responsive until it is turned off and on again (via power button). Home button is functioning with no problems.
    As the phone is now out of its warranty period I want to verify if it's the OS that's causing this or do I actually have a hardware issue.

    I have the same issue. iPhone 5, 1 year-old, not even a scratch.
    Sometimes my touch screen works, sometimes not. When it works, it is just for some seconds, then some phantom touches start to happen all over the screen, but specially, when i'm typing, it types z or m, when I try to type something in, and it receives it, it will act as z or m again....
    If I switch off my screen and switch on again... sometimes it will work, sometimes it wont... veeery unstable.
    I considered downgrading to 7.1.2 but since I heard it is ilegal I decided to wait for a new iOS release.... any suggestions? (already wiped it and the issue continued...)
    Is it really not recommended to downgrade it and have my phone funcionalities back?

  • PRS-T1 rapid page turns / touch screen unresponsive

    I'm having problem with my new PRS-T1.
    At least once a day, when using the touch screen swipe to turn pages, the pages will start turning very rapidly and does not stop. The only way to stop it is to go back to the home screen by using the button. From this point, the touch screen is unresponsive, but the hardware buttons work correctly.
    After a few minutes, touch screen starts working again normally again.
    If I use just the page turn buttons instead of swipe gesture to turn pages, this problem never happens. Using swipe it happens often, but not easily reproducible so not sure what is causing it.

    Thank you for your post and welcome to the forum.
    If the Reader is consistently unresponsive or oversensitive with a variety of books and you have reset the Reader to no effect it may need service. Give Sony product support a call and they can arrange this for you:
    http://esupport.sony.com/US/perl/suppor ... ?mdl=PRST1

  • IOS 7 making touch screen unresponsive

    Since updating to iOS 7 my iPhone 5 touch screen has become intermittently unresponsive. It was fine and normal in iOS 6 and was refurbished less than a month ago (my lock screen wasn't working and I got the phone replaced). How do i solve this problem? The phone will often times not respond to any sort of touch making swiping, typing, and holding something down impossible. It has been like this since updating to iOS 7 when it came out more than a week ago.

    Basic Troubleshooting Steps when all else fails
    - Quit the App by opening multi-tasking bar, and swiping the App upward to make it disappear.  (For iOS 6, holding down the icon for the App for about 3-5 seconds, and then tap the red circle with the white minus sign.)
    - Relaunch the App and try again.
    - Restart the device. http://support.apple.com/kb/ht1430
    - Reset the device. (Same article as above.)
    - Reset All Settings (Settings > General > Reset > Reset All Settings)
    - Restore from backup. http://support.apple.com/kb/ht1766 (If you don't have a backup, make one now, then skip to the next step.)
    - Restore as new device. http://support.apple.com/kb/HT4137  For this step, do not re-download ANYTHING, and do not sign into your Apple ID.
    - Test the issue after each step.  If the last one does not resolve the issue, it is likely a hardware problem.

  • Section Of Touch Screen Unresponsive

    Hello, I bought an Ipod touch 8GB and when lately I have noticed that there is about a 5 cm section that goes across the middle of the screen that is unresponsive to touch.
    This is really a problem because there are a lot of important buttons in that unresponsive section of the screen such as the G and V buttons on the keyboard when I have the Ipod sideways and the play and pause button doesn't work for youtube and when I watch videos. My question is has anyone else had this issue and is there a solution? I'd really rather not buy a new one, but I'm willing to erase all data just to fix this issue. Thanks.
    Message was edited by: B-Ry
    Message was edited by: B-Ry

    I read a while back were the iPhone had sensitivity issues with there displays, in the first generation of iPhones, and that all of the affected iPhones had to be recalled and replaced.
    You should contact your local Apple store or call Apple support and get the iPT replaced, this is not how it should respond. The entire surface should be sensitive to touch. Mine is and it is an 8GB iPT.

Maybe you are looking for

  • Inserting multiple records in to database table using webdynpro abap

    Hi all, I have created a username inputfield,a button and a table with one coloumn. If i enter  names in the input field then the values should be displayed in that table. Even i have got the answer i am not able to insert the values in to database(z

  • Problem writing Serial Number programatically and printing report

    Labview 8.5 TS 4.0 I modified the my PreUUT sequnece to call a VI which enters a new Serial Number via a string control. This works fine. The problem is this new SerialNumber does not seem to be accepted by TestStand and therefore does not print the

  • Replication of enhanced Sales Order to R3

    Hi, We have extended sales order on CRM using EEW. This has extended corresponding BDocs. Now when we create the order the additional fields are being replicated to mobile however we want to map them to 'Z' fields in R/3 as well. The R/3 sales order

  • Newly imported thumbnails not showing previews

    Today when I was importing images off a memory card I noticed the thumbnails in library mode were not showing any previews, they were blank (gray) for only the recently imported items.  My other folders' thumbnails are showing previews with no issue.

  • Update java server from 7.00 SP17 to 7.05 SP05 with EHPI

    hi all i' m upgrading a java server from version 7.00 SP17 to version 7.01 SP05 (ehp1) with the EHPI installer during the phase  PREPARE_JSPM_QUEUE i get the error that the jspm has already been started any ideas regards tom file: TroubleTicket_01.tx