II installed iTunes 10 and now nothing will play

I have just installed iTunes update 10.2.2.12 for Windows 7, 64 bit. Now nothing will play. I uninstalled it, downloaded again and still nothing will play!

I have the same problem. Nothing works. The only thing that worked was a complete system recovery of Windows.

Similar Messages

  • I installed itunes 11 and now it will not open any help would be GREATLY appreciated!!!

    I installed itunes 11 and now it will not open any help would be GREATLY appreciated!!!

    Hi
    Can you use the mouse to access and start System Preferences?
    When you rest the mouse over a dock icon, does its name pop up?
    What happens if you open an application by ctrl-clicking on the icon then selecting Open?
    Bob

  • Accidentally changed scrub rate and now nothing will play

    I was listening to an audio book, and I went to change the time I was at in the bar and moved my finger the wrong way and changed the scrub rate and now nothing will play, no matter how fine or normal the scrub rate is. Seriously, how do i change it back so I can hear sound again!?

    And then I paused it to finish something and then when I went back to play, the sound wouldn't work again. What am I supposed to do? What's with this scrub rate nonesense? Help me please!!

  • I installed the latest itunes update and now nothing plays

    I installed the latest itunes update and now nothing plays.  No music, radio etc.  Have others experienced a similar problem?

    I just tested mine and my music and videos played without a problem. Suggest you re-download iTunes 10.4.

  • Installed new itunes update and now it will not sync with outlook

    installed new itunes update and now it will not sync with outlook. it says it will only do it through the Icloud. How can i change it

    Hello xtremejoe
    I find that changing some settings in your syncing options will get syncing working again, like enabling Manually manage music and videos.
    iTunes 11 for Windows: Set up syncing for iPod, iPhone, or iPad
    http://support.apple.com/kb/PH12313
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • I just installed itunes 12 and now when i plug my ipod into my computer it won't sync I have tried different ipods still nothing

    i just installed itunes 12 and now when i plug my ipod into my computer it won't sync I have tried different ipods still nothing

    Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities

  • A friend upgraded my flash player and now nothing will work.

    I am completely computer stupid. My friend said that my flash player needed to be upgraded. He upgraded it for me and now nothing will work. Youtube, games, etc. Can someone help me fix it. Like I said I am computer stupid so I will need step by step instructions if anyone can help.

    amhinton1 wrote:
    in Windows/system32/macromed/flash is a text document called FlashInstall.
    This means that Flash Player is not installed - the required files should be in this folder.
    Download this installer http://www.adobe.com/go/full_flashplayer_win_ie; save it to disk (e.g. your Desktop), then close all browser windows and run the downloaded installer.
    What do you now have in that folder?
    Is Flash Player now enabled, and is it working?  (Check it here http://www.adobe.com/software/flash/about/)

  • I installed 4.0 and now firefox will not open, though it is running, I have uninstalled and re-installed and it still will not open?

    I installed 4.0 and now firefox will not open, though it is running, I have uninstalled and re-installed and it still will not open. Not sure why this is happening

    If you use ZoneAlarm Extreme Security then try to disable Virtualization.
    *http://kb.mozillazine.org/Browser_will_not_start_up#XULRunner_error_after_an_update
    See also:
    *[[/questions/880050]]

  • Installed itunes 11 and now I get the following message 'The itunes library cannot be saved. An unknown error has occured (-50)

    Installed itunes 11 and now I get the following message 'The itunes library cannot be saved. An unknown error has occured (-50). How do I fix this problem?

    Same problem here since latest update.  As usual poor support from Apple with no answer or fix for this bug.

  • Sent email that was too big and now nothing will send

    I sent an email that was too big and now nothing will send.

    Delete the problem message from your outbox.

  • I did new itunes update and now it will not sync my phone

    I updated my itunes yesterday and now it will not sync our iphone  any ideas on how to fix this?

    Hello xtremejoe
    I find that changing some settings in your syncing options will get syncing working again, like enabling Manually manage music and videos.
    iTunes 11 for Windows: Set up syncing for iPod, iPhone, or iPad
    http://support.apple.com/kb/PH12313
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • Installed itunes 6 and now CD/DVD drive won't work at all

    I just bought a new ipod and installed the software and now my CD/DVD drive won't work at all. Here is my info: Could someone please help!!!
    Microsoft Windows XP Professional Service Pack 2 (Build 2600)
    Dell Computer Corporation Inspiron 5160
    iTunes 6.0.4.2
    CD Driver 2.0.4.3
    CD Driver DLL 2.0.3.2
    LowerFilters: ASAPIW2K (6.0.2.0),
    UpperFilters: GEARAspiWDM (2.0.4.3),
    Video Driver: NVIDIA GeForce FX Go5200 \GeForce FX Go5200
    IDE\DiskFUJITSUMHT2080AH_______________________006C___, Bus Type ATA, Bus Address [0,0]
    IDE\CdRomSONYDVD+-RW_DW-D56A____________________PDS7___, Bus Type ATA, Bus Address [0,0]
    SCSI\CdRomROXIO__DVD-ROM_EMULATOR___, Bus Type SCSI, Bus Address [0,0]
    If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
    Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
    Current user is administrator.
    D: SONY DVD+-RW DW-D56A, Rev PDS7
    Drive is empty.
    E: ROXIO DVD-ROM EMULATOR, Rev
    Drive is empty.
    If anyone has a solution for this stupid problem that would be great.
    Thanks

    Yes, I suspect that it's the virtual drive emulator software you have there. I know nothing about that software and it doesn't look like the Roxio support page even mentions it, so it's probably software old enough that they're not supporting it anymore.
    To uninstall any software, I would start with the "Add and Remove Programs" Control Panel. Uninstall it there, and then use the Microsoft Installer Cleanup Utility —
    http://support.microsoft.com/default.aspx?kbid=290301
    Download and install that. Run it and find the drive emulator software on the list and remove it there. And reboot and see if that has successfully removed it.
    There is a work around that if we just remove the iTunes CD driver, you'll probably get your drive back, but you'll only be able to rip CDs, you won't be able to burn them without the iTunes CD driver installed. You do have some Pinnacle CD burning software installed. Are you currently using that or is that leftover cruft as well?

  • Downloaded itunes 10 and now it will not open on my pc

    I have downloaded the latest version of iTunes and now it will not open on my pc. Help!

    Hey, try this uninstall all the apple application S/w from your pc,
    Reboot it
    Now download a fresh itunes from apple and try installing
    Reboot it

  • I updated my iPod touch yesterday and now it will play my music.

    I updated my ipod touch yesterday to the new os and now it will not play music that is loaded on the the ipod.
    The music shows that it is present, but it will not play. HELP!!!

    Try here:
    iOS: Not responding or does not turn on
    If the logo remains one, let the battery fully drain. After charging for an hour try again.

  • Updated to iTunes 10 and now iPad will not sync on PC Windows XP Pro

    I updated to iTunes 10 earlier today and now my iPad does not register at all in iTunes Devices pane when I try to sync it. The iPhone 4 syncs perfectly. Do I just wait for Apple to sort out the problem with iTunes 10 or what do I do please.
    THANK YOU.

    I had the same problem after upgrading to iTunes 10, but I'm running Windows 7. The iPad was being detected by Windows but not by iTunes. My iPod would sync with iTunes OK. Uninstalling and reinstalling iTunes alone did not fix it. I fixed it by performing the following steps:
    1. Uninstalled the Apple Mobile Device USB Driver from the Universal Serial Bus controllers section in Windows Device Manager (this will only be displayed if the iPad is connected to the PC). I also selected the option to 'delete the driver software for this device' - this may be different in XP, I cannot remember.
    2. Uninstalled iTunes, Apple Application Support, Apple Mobile Device Support, Apple Software Update, Bonjour and Quicktime (basically, ANYTHING Apple related) using Windows Add/Remove Programs. Your iTunes library files and media SHOULD be unaffected by uninstalling but I made a backup of mine first JUST IN CASE. They are usually located in your 'My Music\iTunes' folder.
    3. Made sure 'C:\Program Files\Common Files\Apple' and 'C:\Program Files\iTunes' had been deleted by the uninstall routines. I also deleted the Apple related folders in my local profile. On XP these will be in 'C:\Documents and Settings\<your username>\Local Settings\Application Data' (you may have to enable to option to view hidden files and folders). The folders I deleted were called 'Apple' and 'Apple Computer'. Renaming them will have the same effect if you are nervous about deleting them.
    4. Rebooted the PC (why not, eh?).
    5. Downloaded the iTunes installation file (iTunesSetup.exe) from the Apple website. Installed it.
    6. Launched iTunes, all my music, podcast subscriptions etc were preserved so I did not have to use my backup from Step 2. Connected my iPad. The device driver was installed by Windows, the iPad appeared in iTunes and I was able to sync OK.
    I can't say for sure which of the steps above was key to fixing the problem, but hopefully if you do the same it will resolve your problem. Good luck!

Maybe you are looking for

  • API TO MIGRATE PERSON  FROM ONE BUSINESS GROUP TO THE OTHER

    Good afternoon guys, Please can I have a sample API to move a person from a business group to another. Thanks for your response. Warmest regards, Olivet

  • Remote  Cube back ground processing

    Hi gurus, Is it possible to execute a Query which is on a remote cube in Back ground. In my situation: I am loaded the data into the regular cube and then reconciling this cube data with the remote cube data ( which picks the data from R/3 tables usi

  • Excecution plan Area  + Sort area

    Dear Friends, Some selects of our application is relatively slow in some location (When database is slow) . But same selects shown good performance in most of the time. Database is always not slow in peak hours. I feel there would be insufficient spa

  • How to fetch the SAP Standard Prog. built internal table into my_z_prog.?

    Hi Experts, Pls. let me know that, How to fetch the SAP Standard Prog. built internal table into my_z_prog.? For more explannation, pls. see my other thread with name of yestrday, SUBMIT RFGLBALANCE WITH selection criteria, then How to get resulted i

  • MAC no longer using iPhoto and using Photo

    Is there going to be an update so when importing photo's to Elements Organizer we can select Photo instead of iPhoto? Otherwise I cannot find the pictures on the MAC where they are kept for the new Photo program. Any suggestions?