IIe card in a LC/Performa 575 computer

Hi,
I just read this article in Apple database:
http://docs.info.apple.com/article.html?artnum=8458
Is there a way to make a 575 uses the IIe card and the COMM slot (with Ethernet) work together, or it is really incompatible all the way?
Thanks

Steve@Mac
Although the original Apple IIe Card Owner's Guide (030-4562-A) was all about the Mac LC and System 6.0.8, it became clear in due course that the card had wider support than that. Your link lists the possibilities. There are, however, caveats to consider when choosing a machine from that list. There are two at the foot of the Table in article 8458, one of which Jim cited to you.
You need to be aware that there are other hindrances than obligatory 32-bit operation in the 'host' computer. The LC 575 restriction is a hardware limitation. The Apple IIe Card is a 65C02 Apple IIe within a Mac, working analogously to a DOS compatibility card in a Mac. You will be best off with a 68030 LC machine: any one in the first seven listed; or a CC, or a Performa. Any suitable 680x0 machine is there to provide support for the Apple IIe Card's processor to be itself, but not to provide services that the 65C02 cannot use.
If you intended to have simultaneous use of the Apple IIe card and ethernet for transfer of ProDOS files, Jim's other suggestion (the use of AppleShare) for file transfer, by selecting a notional and optional card in 'Slot 7' from within the Macintosh environment, is the preferable choice, especially if you have previously partitioned the Mac's HDD with a ProDOS partition (up to 10MB) for the purpose.
Apple IIe; 68K: 11DT + 4PB; PPC: 5DT + 3PB; G3: 6DT System 6.0.8 to OS 10.4.x

Similar Messages

How do I get my PCI-CAN card to work in my Dell computer?

I am trying to get a PCI-CAN card working in a Dell GX110 computer. The computer quits right after the initial Dell spalsh screen goes away. After that point, I only get a flashing cursor in the top left corner. NI support suggested a bios upgrade, but the computer is already at the latest bios rev. When I remove the card, the computer boots fine. What do I try next?
Lars

The problem may be related to a specific chip ( MITE) on the PCI CAN card. Please call us at 512-795-8248 with the part no and the serial of the PCI CAN card, so that we can verify whether the CAN card may have a hardware problem and have you send the card back to us for repair or to get a replacement.

TS1292 do i have to have my ipod touch with me to redeem gift card or can i loan via computer to the ipod so it will be available on the ipod

do i have to have my ipod touch with me to redeem gift card or can i loan via computer to the ipod so it will be available on the ipod

All the music should be on the computer so you can just sync the music back to the iPod after you restore the iPod to factory defaults/new iPod. Regarding app data, just export (email/file sharing etc) as much as possible so you can import it back.

Ext SB card on notebook with XP need Computer speakers

?I have a SB0270 external SB card plugged into?my notebook computer's USB running Windows XP and using Audacity. I'd like to get sound from my computer speakers while recording music thru audacity. I do get sound from the earphone jack on the sound card. I've enabled sound output when recording in Audacity. I can see? via the vu meters in audacity, that the sound is being provided to the output, but ?I can't get sound from the speakers within the notebook computer. How do I turn the notebook speakers on. The minute I disconnect the USB cable to the external sound blaster card, the speakers in the computer work fine. I assume that the Sound Blaster software is turning off the speakers in the notebook. How do I turn them on?

And, you can be certain it's not a Li've! 24-bit. They didn't make them back then! It's either a Li've! 5. (probable) or a Li've! 4. (unlikely if the computer was really manufactured in 2000).
You can try removing anything that was possibly added by your using the cd, then letting XP install its nati've driver for it. I would download DriverCleaner from driverheaven.net. If there's nothing in Add/Remove Programs (as there probably isn't if your attempt to install the cd version of the driver (provided by Gateway?) failed before finishing), then go into device manager and remove anything related to the card and reboot to Safe Mode and run DriverCleaner. Delete the Creative Folder in Program Files that your cd probably made. Reboot and let XP install its driver. Reboot again.
That's probably the best your going to get if Gateway didn't update the Creative software for SP2. You could attempt to install the Li've Uni-Pack stuff from the download section here, but it might or might not work on the OEM card you have. If the software on your Gateway/Creative cd had problems then your probably going to just be able to use the nati've Windows XP driver. You will still be able to adjust your settings with the Windows audio controls, but won't be able to use Creative software.
You would need to contact Gateway to see if they really don't have a package for this. Did you check their website for updates for your model?

Itunes STILL charged my card, but then told me the computer I was using couldn't be authorized. OK, fine...but, now, how and where do I go to get my downloaded music?

itunes STILL charged my card, but then told me the computer I was using couldn't be authorized. OK, fine...but, now, how and where do I go to get my downloaded music?

I'm sorry, but your data is gone & there is no way to get it back.

Must reseat My x-fi express card every time I restart my computer

AMust reseat My x-fi express card every time I restart my computerW I am forced to reseat my x-fi express notebook card every time I turn my computer on in order for it to work which is very frustrating since I do a lot of video recording by Firewire and need the card to work reliably. Once i reseat it into the express slot, it works fine, but not before then.
I have a Dell XPS M730 running XP sp3.
It is apparently a driver problem because if I forget to reseat during bootup, both Sony Sound Forge and Adobe Premiere Pro .5 freeze up when I try to load them at they are scanning for audio devices.
So far I've tried:
1) disabling the on-board sound card hoping to eliminate a possbile confilct.
2. Downloading the latest drivers, etc.
Does anyone have an idea of how to solve the problem?
Thanks

1. If you log in automatically, a bug in some versions of OS X will cause the desktop picture to revert to the default image at every startup. The only known workaround is to disable automatic login in the Users & Groups preference pane.
2. If the selected Desktop picture is stored in an iPhoto library on an external drive, export it from iPhoto and move it to a folder on the startup volume. (Credit for this solution to ASC member janay.)
3. If the desktop picture always reverts to a plain blue background, one of your login items may be causing the problem. The "TeamViewer" application can have this effect; see this thread. If it's not that in your case, rule out all other third-party login items as possible causes.
4. If you have a MacBook Pro with automatic graphics switching, disable it temporarily in the Energy Saver preference pane, set the Desktop picture, then restart the computer and re-enable graphics switching.
5. If none of the above applies to you, proceed as follows.
Back up all data.
In the Finder, hold down the option key and select
          Go ▹ Library
from the menu bar. From the Library folder, delete the following item, if it exists:
          Caches/com.apple.systempreferences
and move the following items to the Desktop, if they exist:
          Application Support/Dock/desktoppicture.db
          Preferences/com.apple.desktop.plist
Launch System Preferences and test. If you still have the issue, put the items you moved to the Desktop back where they came from and post again. Otherwise, delete the items.

Can I install a graphics card on a Touchsmart 610-1050f computer with intel HD graphics

Can I install a graphics card on a Touchsmart 610-1050f computer with intel HD graphics and if i can where
can i find a graphics card that will install in that computer.

There are many MANY threads on this, the answer is that it's not worth your time since you have to have a replacement card that the HP system BIOS already likes,, and this is not the same as replacing anything in a desktop, this is the equivalent of replacing the graphics in a laptop.
Since the graphics cards are not considered a user upgradable component there are no lists of "approved cards" nor guides to doing it, the closest you could do is the service or recycling disassembly sheets.

I need a PCI ethernet card driver for my Performa 6360...

Roughly a week ago, I decided to add yet another one of my classic Macs to my LAN, a classic gaming LAN of sorts, with that mac being a Performa 6360. With it's single empty (at the time) PCI slot, the solution for an ethernet card for the system was basically screaming at me. Unfortunately, I went to my local electronics store with the assumption that PCI ethernet cards are fairly generic devices that should work in nearly everything without a problem. That turned out not to be the case. Once I finally aquired the time to install it, the card itself appeared to work, with the outer LEDs indicating network activity and a 100mbps network speed, however, when I went into the Appletalk or TCP/IP control panels, I came to the terrible realization that I needed a driver. The included CD was, much to my dismay, Windows only, Google searches haven't been much help, and worst of all, I seem to have misplaced my reciept. The "card" I keep mentioning is a Linksys LNE100TX version 5.1. Here is what is shown in the apple system profiler:
==============================
PCI Slot
Card type: ethernet
Card name: pci1317,574
Card model: -1
Card Rom #: Not available
Card Revision: 17
Card Vendor ID: 1317
==============================
What I am wondering is where I could find a driver for this card, and if that answer is "nowhere", is there any way I could get this card functioning under Mac OS 8.1? Any help would be greatly appreciated. Thanks.

Niteshooter wrote:
Well the good news is there was one,
http://www.welovemacs.com/net-cs2-fe.html
finding one, is a good question. Oddly enough the link you posted to the 10T version is the same company as above.
Yes, I have tried searching a number of places for it, and haven't come up with much. Here is what a google shopping search pulled up (eBay came up empty), the first being "unavailable" for purchase once you add it to your shopping cart and the second costing only $150! I could easily buy a new (used) mac with the card installed in it for that much!
As for the PCI slot cards you are trying, keep in mind that you are trying to use current cards which didn't exist back in the day your Mac and OS were made...... I have Asante 10/100 PCI cards in some of that generation mac and they work fine but then they were supported by the OS.
Good point. Even back when I purchased it, the card seemed a bit of a long-shot to me, too. However, being on sale for $15, I thought, "why not at least try?". Unfortunately, I came up with the results above. However, you have given me a good idea. I realize from reading a few posts around here on the issue that it is a good idea to keep the pci slot of the computer open on this computer until there is a need to upgrade, let's say, for a graphics card. However, what if I have no future plans to add anything (as is currently)? Is it really that necessary that I keep the slot open? I'm sure it would be exponentially easier to find a card for that.
A long shot might be to try loading OS 9.0.4 and see if you get lucky as 8 is pretty old plus there's a part of me that wonders with such a slow bus and cpu that 100T is going to make a big difference.
Kevin
Thank you for the suggestion, but that's how I collected the information for the card in the first place. The Performa 6360 didn't seem to take the card, so I popped it in to my Beige G3 running Mac OS 9.2.2 and hoped it might work on that. Same problem, however, the Apple System Profiler is much more thorough on that OS, so I was able to acquire the card's information. The reason for the 100-BaseT Ethernet, again, is not solely based on that one computer; It's the fact that I would prefer the network to run at the faster speed and with four macs currently on it, with a few more modern ones such as the iBook G3 shown below, the speed is a nice thing to have.
So, on that note, any suggestions for a PCI equivalent? Has Apple ever made any? If so, where could I find them at a reasonable (Read: Not $150) price?
Thanks again.

I bought a iphone 3gs from a friend and I was told to put in my sim card and connect it to the computer and it stays on the recovery screen, does anyone know the reason why this is happening?

I dont know if its my computer because it says that the device is unknown and doesnt come up as apple mobile device but I've watched youtube videos that seemed like they had similiar problems but they didnt work for me. I've tried the whole home button thing,updating itunes and everything but the recovery screen still wouldnt go away. This is the first time I'm using an iphone so I'm totally clueless about whats happening.

Installing a SIM card will never rectify the device being in recovery mode.
Put the device in DFU mode and attempt to restore it as new via iTunes. Google "DFU mode" for instructions.

I have a new hp 6520 and want to upload from sd card to hp photosmart in my computer.

I have a new Photosmart 6520 all in one and want to import photos from an SD card into HP Photosmart on my desktop. It is not recognizing the card, only the scan feature. The instructions show nothing about importing photos

Hi debpayr7 -
Was your issue resolved by the first post made above? When you insert a photo card into the Photosmart 6520, it should be recognized as a mass storage device by your computer and accessable via Windows explorer (or appear as a drive on the desktop for Mac).
You should be able to double click that drive and access the 'DCIM' folder where your photos are located. From there, you can copy and paste them anywhere you'd like
Hope that helps...
-Brandon
***I am an HP employee***
The comments above represent myself and do not reflect the opinions of HP.

I can't download photos from my canon 350d to my apple mac - even using i-photo (what's image capture). The card doesn't fit in the computer and I don't ave a card reader. Is there a simple solution?

Can anyone help? I'm trying to get the pictures off my canon 350d onto my i-mac (I've tried through i-photo).

Option 1: Download Canon's software. Attach the camera to the computer (USB A to mini B) and the software will ask where to download your photos.
Option 2: Buy a CF card reader. I recently purchased a PIXELFLASH card reader for $16US.

Card Reader not showing up in Computer (PC - Vista) but does in LR 3

I've been using Lightroom 3 for about a week and noticed last night that my card reader is no longer showing up in Computer (listing of internal & external drives) but I can find it in the Computer Management screen. I can access it through the Computer Management screen and it can be accessed through Lighroom. Has some default setting been changed and my card reader hijacked by Lightroom. Any help or ideas would by appreciated. It works fine one another computer (desktop with Lightroom 3 installed) but not on my laptop.
I'm running it on a PC with Vista OS

Try using System Restore to restore a previous restore point from before this became an issue.
- Peter

Need to know what graphic card I should get for my computer

didn't know where to post, budget 170 or less, not sure if I should just bring my computer to the store, or to post here, I don't even know if this is the right place, but I'll try !
here's some specs. http://i45.tinypic.com/2j0b66c.png
must be able to run Diablo 3.
please help!

Allllrighty. Per the specs here : http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01949110&tmp_task=prodinfoCategory&cc=us&dlc=en...
Your computer has a 250 power supply. This will also need to be upgraded.
Here are my recommendations
Power Supply : http://www.bestbuy.com/site/Thermaltake+-+600W+TR2+ATX+Power+Supply/9827268.p?id=1218179699692&skuId... I personally have the 750watt version of this in my gaming machine, and it's solid.
For graphics, I know you said 170, but this is a good card for the price. :
http://www.bestbuy.com/site/EVGA+-+01G-P3-1351-KR+GeForce+GTS+450+Graphic+Card+-+783+MHz+Core+-+1+GB...
If you like my post, or solution to your issue/question, go ahead and click on the little star by my name and/or accept the post as the Solution. It makes me happy.
I'm NOT an employee of Best Buy, or Geek Squad, though I did work as an Agent for a year 5 years ago. None of my posts are to be taken as the official stance that Best Buy will take on your situation. My advice is just that, advice.
Unfortunately, that's the bad luck of any electronic, there's going to be bad Apples... wait that's a horrible pun.

My SD-card reader don´t takes SDHC Computer Pavilion zd8180ea Win-7

I tryed to uninstall the reader and start the computer with the card. No result
What can i do is the computer to old?

Your zd8180ea appears to be from 2004 or 2005, which is before the widespread introduction and use of SDHC compatible card readers. It is very likely that the computer is too old to use with SDHC cards.
Please send KUDOs
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

ESata Card is Force Shutting Down My Computer!

I have a 4 port eSata Card, plugged into one of my PCI slots. I recently had to reformat my computer and now have 10.5.7. Whenever I plug in my 5 HD enclosure (NORCO), it will work for a little bit then the gray screen of death will come up saying I have to restart my computer by holding the power button.
I contacted the company that makes the eSata card (EZQuest) but they had no solution other than to replace the driver. I have tried everything and am now out of options. Any suggestions? Is it my card or computer?

I have a 4 port eSata Card, plugged into one of my PCI slots. I recently had to reformat my computer and now have 10.5.7. Whenever I plug in my 5 HD enclosure (NORCO), it will work for a little bit then the gray screen of death will come up saying I have to restart my computer by holding the power button.
Hi,
If it is this card it is a SiI-3124 based controller.
http://www.ezq.com/product/productspec.php?id=23
It is not unusual to find that this type of card will not work on the Macintosh if the BASE BIOS is not installed. The other possible problem is if conflicting drivers have been installed on the boot disk.
What I would do is install a fresh copy of Mac OS X on a spare empty hard disk and then install the SiI3124 32-bit universal Mac OS X 10.4.9, 10.4.10, & 10.5.1 BASE Driver v2.0.3 found here.
http://www.siliconimage.com/support/searchresults.aspx?pid=27&cat=3
If it works you will know the original boot drive has a driver conflict. If this fails to work then you either have a defective card or the BASE BIOS may not be installed on the controller.
Have fun!

IIe card in a LC/Performa 575 computer

Similar Messages

Maybe you are looking for