Iirig mic- hear what you speak in the real time

Hi, i wonder if i can actualy hear what the person speakig in to the irig mic says
I tried it in camera app but it just doesnt work
iRig microphone u can connect with 3,5 jack and then you can plug in Headphones but i cant hear anything in camera app, is there a way or app what can do what i want? Thanks

hi matylda,
you need to use standard headphones (ie without a mic), not a headset. actually, this is mentioned in the instruction manual. but the photo on the packaging is quite misleading, since it depicts headphones that look like the iphone headset (which does not work). ;-)
btw - some adapters do not work either. see manual.

Similar Messages

Does the sound of your caller get reduced when you speak at the same time?

Hi everyone,
I'm noticing some strange behaviour of my iPhone 3G's audio on the O2 network here in the UK. Both O2 & the iPhone are new to me so I don't know which is the cause, but was wondering if anyone else has experienced this 'problem'? What happens is this:
When I'm on a call with my ear to the iPhone's earpiece (or using headphones) & I speak whilst the caller is speaking (or let's say I'm chatting to my wife in the same room as me whilst I'm listening to 'hold music'), I've noticed that *the volume & call-quality of the incoming line is often reduced*.
Initally this might not seem a problem, BUT, there have definitely been a view times when I've been in a noisy environment (such as street traffic, or my kids shouting & playing in the background) where I've missed things that the caller told me. In both these situations, I've noticed that the caller's voice has got quieter, sounded 'grainy' or even sometimes gone totally quiet until the sound from me (or my environment) has stopped. The 'problem' seems to right itself a minute or so of the call, but that's little consolation to the first 60 seconds of the call!
It's most noticeable on headphones by the way; As a test, I plugged in regular headphones to my iPhone (i.e. not the iPhone IEMs with the mic), called a landline phone-line with a pre-recorded message, then spoke into the iPhone's built-in microphone. Every time I did this, the incoming audio signal was 'turned down' &/or sounded gritty, then returns to normal when I (or my background noise) went quiet.
I don't think this is a fault with my phone. but more either an iPhone 3G hardware 'characteristic', v2 software bug, or network issue. (O2 said they've never heard of this before of course...)
If anyone else has the time to try this out please, I'd appreciate it
Thanks,
Jason

Hi Quickdraw,
Thanks for your reply.
I don't know this for sure, but I think it has EVERYTHING to do with bandwidth.
Yes, that makes a lot of sense... I was making calls on 2G/Edge at the time of my 'tests' rather than 3G, partly due to battery-saving but also that 2G still has much better coverage over here (just as you guys in the States seem to be experiencing).
I've done some more tryouts today, & noticed that if the 2G signal is really strong, OR if I switch to 3G & have a reasonable-to-good reception, the 'incoming-signal-dropping-out-when-I-talk' doesn't happen much at all...
So, the bandwidth thing does make sense, but it's interesting/annoying that it manifests itself as "one good-quality voice OR the other", rather than "full-duplex-but-not-so-great-for-both-voices" sound...
If anyone in the UK can feed back their experience with O2, I'd appreciate it please. (I never had this issue in the 10 years I was with Orange..)
Cheers,
Jason

When I'm playing games on my Mac, I want to my viewers (from YouTube) to hear whats going on in the game, as far as I know, I can only record my voice audio, and the screen. Is there anyway I can record game audio too?

When I'm playing games on my Mac, I want to my viewers (from YouTube) to hear whats going on in the game, as far as I know, I can only record my voice audio, and the screen. Is there anyway I can record game audio too?

When I'm playing games on my Mac, I want to my viewers (from YouTube) to hear whats going on in the game, as far as I know, I can only record my voice audio, and the screen. Is there anyway I can record game audio too?
You have two basic options. One is to use a commercial screen recording app with access to system audio built into the app and the other is to add a system extension like SoundFlower that allows the QT X screen recorder to access/record the system audio. I use the former so I am not that familiar with SoundFlower but there should be several posts to this forum covering this topic.

Several of us have a iPhone 6s and are having trouble with hearing and speaking at the same time when using the phone. ? The speakers seem to be too far apart? Are others having this issue? Solutions?

Several of us have a iPhone 6plus and are having trouble with hearing and speaking at the same time when using the phone. ? The speakers seem to be too far apart? Are others having this issue? Solutions?

Not having the problem, don't personally know anyone who is.

For the past month, I've had an echo of my voice while I'm talking on my phone. It's very annoying and sounds like multiple people are speaking at the same time and it's only me. Anyone know what's wrong?

For the past month, I've had an echo of my voice while I'm talking on my phone. It's very annoying and sounds like multiple people are speaking at the same time and it's only me. Anyone know what's wrong?

For the past month, I've had an echo of my voice while I'm talking on my phone. It's very annoying and sounds like multiple people are speaking at the same time and it's only me. Anyone know what's wrong?

What you like about the BlackBerry 10.3.X OS update ?

Tell What you like about the update BBOS 10.3
For me it's the interactivity and the repsonse of the interface.

For me it's the Customizable Notifications Profiles, much like we had on OS7.
It's also BlackBerry Blend!
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

What is the real time use of implicit and explicit cursors in pl/sql

what is the real time use of implicit and explicit cursors in pl/sql.............please tell me

You can check the following link ->
http://www.smart-soft.co.uk/Oracle/oracle-plsql-tutorial-part5.htm
But, i've a question ->
Are you student?
Regards.
Satyaki De.

HT201210 i have 3G since 3,5 years now, what happened yesterday for the 1st time since ever - is that the phone has

Hi everybody!
I have 3G iphone since 3,5 years now, what happened yesterday for the 1st time since ever - is that the phone has switched off itself even when was charged n since then it refuses to reboot ! Indeed, application says - Enjoy your jailbroken phone ! What would that mean ? Any chanses to get that phone On ? (or does it mean the phone gone old n i should get a new version of iphone ?)
Thanks in advance !

That means your phone is jailbroken and you can not get help here.

What is the sql query for the real time reports Resource Stats?

Does anyone know what the query is that the real time report tool uses for the Resource Stats page? Trying to develop a custom report that displays similar information that is updated regularly.

Hi,
009 wrote:
Hi Frank,
Just wanted your opinion on the above given SQLI'm not sure I understand it.
I added some more formatting to help me read it:
SELECT      A
,     CASE WHEN LAG(A,1) OVER (ORDER BY A) IS NULL
          OR A=LAG(A,1) OVER (ORDER BY A)
          THEN LAG(B,1) OVER (ORDER BY A)
     END B_LAG
,     B
FROM     (
     SELECT A, B
     FROM
          SELECT '1'A,'Apple' B FROM DUAL UNION ALL
          SELECT '1'A,'cat'B FROM DUAL UNION ALL
          SELECT '2'A,'bat'B FROM DUAL UNION ALL
          SELECT '3'A,'rat'B FROM DUAL UNION ALL
          SELECT '2'A,'yellow'B FROM DUAL UNION ALL
          SELECT '1'A,'pin'B FROM DUAL
     CONNECT BY PRIOR A=B
     ORDER BY A
);What is the purpose of the CONNECT BY in what you have so far?
Is the idea that you will add another CONNECT BY query, using
CONNECT BY b_lag = PRIOR b?
Do you think that will be better than using ROW_NUMBER?
Will it work if (a, b) is not unique?

Satellite M30X-122: How to use headphone and speaker at the same time?

Hi,
is there any possiblity to use the headphone and the speaker at the same time?
When I plug the head phones in the socket, the speaker is swtiched off now.
Thanks
Peter

Hi Peter,
Unfortunately there is no way to use both the headphones and the speakers at the same time. This is because tghere is as physical disconnection of the current to the internal speakers when you plug in the headphones. It is not software controlled. The only way of bypassing this would be to dismantle the headphone socket and permanently solder the connections which are broken when you insert the headphone socket.
regards,

HT4437 can i play songs from my ipad to my airport express and Ihome speaker at the same time?

can i play songs from the ipad to both the airport express and ihome speaker at the same time?

Let's double-check your AX's settings...
To set up AirTunes on the AirPort Express Base Station (AX), using the AirPort Admin Utility, connect your computer directly (using an Ethernet cable) to the Ethernet port of the AX, and then, try these settings:
AirPort tab
- Base Station Name: <whatever you wish or use the default>
- Wireless Mode: Join an Existing Wireless Network (Wireless Client)
- Wireless Network: <select your Belkin wireless network>
Music tab
- Enable AirTunes on this base station (checked)
- Enable AirTunes over the Ethernet port (optional)
- iTunes Speaker Name: <whatever you wish>
- iTunes Speaker Password (optional)
In iTunes:
iTunes > Preferences... > Advanced > General
- Look for remote speakers connected with AirTunes (checked)

Error -1074384569; NI-XNET: (Hex 0xBFF63147) The database information on the real-time system has been created with an older NI-XNET version. This version is no longer supported. To correct this error, re-deploy your database to the real-time system.

Hello
I have a VeriStand-Project (VSP) created with my Laptop-Host (LTH) which works with my PXI, while
deploying it from my LTH. Then I have installed the whole NI enviroment for PXI and VeriStand use on a
industrial PC (iPC). I have tried to deploy my VSP from the iPC to the PXI but the following error
message arose on my iPC:
The VeriStand Gateway encountered an error while deploying the System Definition file.
Details: Error -1074384569 occurred at Project Window.lvlibroject Window.vi >> Project
Window.lvlib:Command Loop.vi >> NI_VS Workspace ExecutionAPI.lvlib:NI VeriStand - Connect to System.vi
Possible reason(s):
NI-XNET: (Hex 0xBFF63147) The database information on the real-time system has been created with an
older NI-XNET version. This version is no longer supported. To correct this error, re-deploy your
database to the real-time system. ========================= NI VeriStand: NI VeriStand
Engine.lvlib:VeriStand Engine Wrapper (RT).vi >> NI VeriStand Engine.lvlib:VeriStand Engine.vi >> NI
VeriStand Engine.lvlib:VeriStand Engine State Machine.vi >> NI VeriStand Engine.lvlib:Initialize
Inline Custom Devices.vi >> Custom Devices Storage.lvlib:Initialize Device (HW Interface).vi
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * • Unloading System
Definition file... • Connection with target Controller has been lost.
The software versions of the NI products (MAX/My System/Software) between my LTH and the iPC are
almost the same. The only differences are:
1. LabView Run-Time 2009 SP1 (64-bit); is installed on LTH but missing on iPC. The iPC has a 32-bit system.
2. LabView Run-Time 2012 f3; is installed on LTH but missing on iPC.
3. NI-DAQmx ADE Support 9.3.5; something strage on the LTH, because normally I am using NI-DAQmx 9.5.5 and all other DAQmx products on my LTH are 9.5.5. That means NI-DAQmx Device Driver 9.5.5 and NI-DAQmx Configuration 9.5.5.. On the iPC side all three products are 9.5.5.. That means NI-DAQmx ADE Support 9.5.5, NI-DAQmx Device Driver 9.5.5 and NI-DAQmx Configuration 9.5.5..
4. Traditional NI-DAQ 7.4.4; The iPC has this SW installed. On the LTH this SW is missing.
In order to fix this problem I have formatted my PXI and I have installed the following SW from the iPC:
1. LabVIEW Real-Time 11.0.1
2. NI-488.2 RT 3.0.0
3. NI_CAN 2.7.3
Unfortunately the above stated problem still arose.
What can I do to fix this problem?
I found a hint on http://www.labviewforum.de/Thread-XNET-CAN-die-ersten-Gehversuche.
There it is written to deploy the dbc file againt.
If this is a good hint, so how do I deploy a dbc file?
I would feel very pleased if somebody could help me! :-)
Best regards
Lukas Nowak

Hi Lukas,
I think the problem is caused by differenet drivers for the CAN communication.
NI provides two driver for CAN: NI-CAN and NI-XNET.
NI-CAN is the outdated driver which is not longer used by new hardware. NI replaced the NI-CAN driver with NI-XNET some years ago, which supports CAN, LIN and the FLEXRAY communication protocol.
You wrote:
In order to fix this problem I have formatted my PXI and I have installed the following SW from the iPC:
3. NI_CAN 2.7.3
NI CAN is the outdated driver. I think that you should try to install NI-XNET instead of NI-CAN on your PXI-System, to get rid of the error message.
Regards, stephan

Creation of Daemon for the DTO for the real time data aquisition

Hi i need help how to create a daemon for the DTP in the real time data aquisition.i'm learning now Sap and practicing a lot to be professional but i need a bit of hel.Can you please give me some details how to create it?
I have to access the RSRDA T-code and what i need to do after?

Hi First of all you need to create a real time DTP once that is done go to RSRDA T-code and click on the Create Daemon
and right click assign DTP , here you can assign the DTP once that is done save and execute . your Daemon will run
Thanks
Santosh

When I send messages off-line, they enter in the addressed mailbox with the date and hour which I've clicked "Send later". How could I set up to the real time?

When I send messages off-line, they enter in the addressed mailbox with the date and hour which I've clicked “Send later”. How could I set up to the real time?

What you say about Send Later timestamp is correct.
When you click Send or Send Later a time is set regardless of when you actually sent the Send Later email.
Please voice your vote at this link:
https://bugzilla.mozilla.org/show_bug.cgi?id=560901
You will need to logon/register.

Inserting Data from Oracle to SQL Server on the Real Time Basis.

Hi Everyone,
I need to insert data from Oracle to SQL Server on the Real Time basis, we have to fetch data from oracle approx 20 tables, and each table has more than 30 Fields. I need to fetch data in every 15 mins.
I have created a job using SQL SERVER Agent by writing insert queries for all the tables with conditions that no rows will be inserted which is already in SQL. note that this job is taking only 1 min to execute.
But in this way our SQL Server getting hanged and it giving problems to other application running in the SQL SERVER.
So i m requesting all of you that what is the best way to insert huge amount of data on the real time basis.
Thanx in Advance.

1) Create Linked server
2) insert data using openquery and set job in sql agent
3) run job after 15 minutes

Iirig mic- hear what you speak in the real time

Similar Messages

Maybe you are looking for