IIS 6 Metabase and IIS 6 configuration compatibility install

I am trying to install IIS 6 Metabase and IIS 6 configuration compatibility to my Windows 7 ultimate machine. the install fails, and the following log entry is created
Update IIS-Metabase of package IIS-WebServer-Package failed to be turned on. Status: 0x80070bc9.

Install the IIS 6.0 Management Compatibility Components in Windows Server 2008 R2 or in Windows Server by using the Server Manager tool
Click Start, click Administrative Tools, and then click Server Manager.
In the navigation pane, expand Roles, right-click Web Server (IIS), and then click Add Role Services.
In the Select Role Services pane, scroll down to IIS 6 Management Compatibility.
Click to select the IIS 6 Metabase Compatibility and IIS 6 Management Console check boxes.
In the Select Role Services pane, click Next, and then click Install at the Confirm Installations Selectionspane.
Click Close to exit the Add Role Services wizard.
Install the IIS 6.0 Management Compatibility Components in Windows 7 or in Windows Vista from Control Panel
Click Start, click Control Panel, click Programs and Features, and then click Turn Windows features on or off.
Open Internet Information Services.
Open Web Management Tools.
Open IIS 6.0 Management Compatibility.
Select the check boxes for IIS 6 Metabase and IIS 6 configuration compatibility and IIS 6 Management Console.
Click OK.
source: http://technet.microsoft.com/en-us/library/bb397374(EXCHG.80).aspx

Similar Messages

Can I uninstall iis when sharepoint is installed but not configured

Hi Experts!!!
Just a small doubt. Will be gladful if any one can help.
Can we uninstall IIS and reinstall it again, when SharePoint is already installed but not configured.
The scenario is, I do not have the SharePoint Licence Key for SharePoint, that is why I do not want to uninstall Sharepoint.
Also I do not want to reach Admin Team for this, otherwise they will take their own time to uninstall and install SharePoint.
I feel somewhere that IIS was not properly installed that is why I want to do a reinstallation.
Can someone provide any quick help.
TIA
Thanks
Manish Upadhyay
Manish

Yep. You can uninstall IIS and leave SharePoint installed. It is only files at the disk. All sharepoint's XML config files will be deleted, also. Than You can instal IIS role again.
You should ask admin team to do a snapshot of a SharePoint server before start. I didn't do it, and can be mistaken.

Can I have Cube and Vxml Gateway configured on same Router box ?

Hi
I have one router Model #3900 Series Can I have Cube and Vxml Gateway configured on same router ? If yes, Can any one help me with sample configuration for same.
Thanks and Regards
Anil Kumar.

Here is an example of CVP hardware/software compatibility for CVP 10.0, similar doc exists for each version of CVP.
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cust_contact/contact_center/customer_voice_portal/cvp10_0/reference/guide/CCVP_BK_1ECCDBC7_00_1001-bom/CCVP_BK_1ECCDBC7_00_1001-bom_chapter_00.html

I want to set up the Time Machine and I would love to use the Time Capsule but since I already have a wireless router I need suggestions on what other external disks Apple could recommend to use with the Time Machine and how to configure that disk

I want to set up the Time Machine and I would love to use the Time
Capsule but since I already have a wireless router I need suggestions on
what other
external disks Apple could recommend to use with the Time Machine and
how to configure that disk.
A complication that I need to resolve is the fact that I am using Vmware
Fusion to be able to use Windows on my Mac. Now it seems that Time
Machine is not backing up my files
on that virtual Windows without additional configuration and my question
is whether you can advise me here or whether this is only a matter for
the Fusion virtual machine.

If you want to use Time Capsule you can.. you simply bridge it and plug it into the existing router.. wireless can be either turned off or used to reinforce the existing wireless.. eg use 5ghz in the TC which is much faster than your 2.4ghz.
You can also use a NAS.. many brands available but the top brands are synology, qnap and netgear readynas series. These will all do Time Machine backups although how well always depends on Apple sticking to a standard. There are cheaper ones.. I bought a single disk zyxel which was rebadged and sold through my local supermarket. It actually works very well for TM at least on Snow Leopard. Major changes were made in Lion and again ML so do not instantly think it will work on later versions. I haven't tried it yet with those versions.
Any external drive can be plugged into the mac. Use the one with the fastest connection or cheapest price according to your budget. USB2 drives are cheap and plentiful. But no where near as fast as USB3 or FW800. So just pick whichever suits the ports on your Mac. Interesting Apple finally moved to USB3 on their latest computers.
TM should exclude the VM partition file.. it is useless backing it up from Mac OS side.. and will slow TM as it needs to backup that partition everyday for no purpose.. TM cannot see the files inside it to backup just the changes.
You need to backup windows from windows. Use MSbackup to external drive.. if you have pro or ultimate versions you can backup to network drive. But MSbackup is a dog.. at least until the latest version it cannot restore the partition without first loading windows. There are about a zillion backup software versions for windows.. look up reviews and buy one which works for you. I use a free one Macrium Reflect which does full disk backups and is easy to restore.. to do incremental backups though you have to pay for it.

What are some of the best iOS apps can remotely played videos, audios, photos and text files from a NAS hdd connected to Airport Extreme USB port? And how to configure this setup?

I have already set up NAS hdd as connecting it at USB port of Airport Extreme, i also want to remotely access it from iPhone, so what's the next step? What are some of the best iOS apps can remotely played videos, audios, photos and text files from the NAS hdd and how to configure this setup?

*Edit - I am not able to connect to the NAS when hardwired to the airport extreme.

I have lightroom 5 and after I just tried to upload my wacom tablet 3 on laptop and, it's not compatable. The only thing a window box keeps apearing when I open lightroom it say tablet version mismatched.

I have lightroom 5 and after I just tried to upload my wacom tablet 3 on laptop and, it's not compatable. I've tried to remove the Wacom program. Awindow box keeps apearing when I open lightroom it say tablet version mismatched and it completely closes my lightroom on me. What do I do??? I need my lightroom

Hi,
/Users/sarahschadek/Desktop/Safari.app/Contents/MacOS/Safari
Move the Safari app from the Desktop to the Applications folder.
Restart your Mac.
That's why you see this:
When I try to do the updates my computer says it has ready it goes through like it is downloading them then at the end it says some of the files could not be saved to "/" files.
After your restart your Mac, click the Apple  menu (top left in your screen) then click: Software Update ...
Carolyn

FCE 4 and 4.0.1 compatibility issue:

FCE 4 and 4.0.1 compatibility issue:
While using Final Cut Express 4.0.1 on one machine I save (saves as .fcp) and now when I try to open the same file to continue editing, on a machine running Yosemite, and FCE 4 it gives an error message saying "This project is unreadable or may be too new for this version of Final Cut". I have worked this way before (not ideal), I am wondering if the 4.0.1 update is still available and if so where?
Any Help would be great.
Yosemite (10.10.01) and Os X (10.5.8)

https://app.box.com/s/tc7hfpryamd3n0htdr9f

What's the implicit joins and how to configure it?

Hello guys
what's the implicit joins and how to configure it? What's the purpose of implicit and explicit joins?
Please help
Thank you

Thus, on my side, I think that :
Explicit join define the join condition between the key column from the table.
(table1.di = table2.id)
While
Implicit Join define :
* the type of join outer, inner, ...
http://gerardnico.com/wiki/dw/join/start
* And the relationship (one-to-many, cardinality)
http://gerardnico.com/wiki/dw/data_quality/relationships
And all this information are used to generate the statement (query).
And I don't really know why you have two type of key :
* Physical Foreign Keys
* Logical Foreign Keys
Regards
Nico

HT3546 I have been unsuccessfully trying to extend the wifi of my Time 2T Capsule with an Airport Extreme 2nd Gen. It works for a while and then loses configuration. I have done everything possible, disconnected it, reset it but it keeps failing, what to

I have been unsuccessfully trying to extend the wifi of my Time 2T Capsule with an Airport Extreme 2nd Gen. It works for a while and then loses configuration. I have done everything possible, disconnected it, reset it but it keeps failing, what to do?

What model and firmware is the 2TB TC?
What firmware is the AE?
Does the AE get good signal from the TC in its current location?
Signal can only be extended that is received intact.
Is it extending on 5ghz? As I remember it a Gen2 AE is only single band, although you can choose either 2.4ghz or 5ghz.
I am fairly sure you are going to tell me your TC is AC model..
I would do a couple of things..
1. Fix the wireless name, make it short, no spaces and pure alphanumeric.
2. Fix the wireless channel for 2.4ghz so it is not going to jump around.
3. Get real results from the AE in its current location for signal strength.. this is really only possible on v5 utility. And that is a double pain with Mavericks because you cannot use it.
Apple have removed all the useful diagnostics from the airport utility. There is next to nothing left. So you need to use the computer and its diagnostics to find signal levels in the location.
http://support.apple.com/kb/HT5606

Getting problem while installing Snow Leopard (10.6.3) on my Mac Mini. The following issue is showing : "mac os x snow leopard cannot be installed on this computer" And My Mac Configuration details: Model Name: Mac Mini Model Identifier: Macmini2,1

Getting problem while installing Snow Leopard (10.6.3) on my Mac Mini. The following issue is showing :
"mac os x snow leopard cannot be installed on this computer"
And My Mac Configuration details: Model Name: Mac Mini Model Identifier: Macmini2,1
Intel Core 2 Duo
1.83Ghz
l2Cache: 2mb
Memory : 2GB
Bus Speed: 667MHz
Please help me......
Thanks

Actually i have Mac OS X 10.5.4 DVD, I need to upgrade it to Snow Loepard(OS X 10.6)...
Please suggest me what to do???
Thanks

Class-Map and Policy-Map Configuration in CM Confusion

Hi,
I'm implementing a green field WAAS deployment for a customer. We currently have a Proof-of-Concept up and running.
I've got some questions regarding custom class-map and policy-map configuration in the CM. I'd like to nail-down the custom class-map and policy-map configuration (and understanding) in the PoC before cutting over the PoC branches to the production WAAS environment.
Assuming a typical WAAS Deployment using WCCP for off-path interception, branch to DC.
==> 61 in LAN (BRANCH ROUTER) <== 62 in WAN (WAN CLOUD) ==> 61 in WAN (DC ROUTER) <== 62 in LAN
We are using two distinct device groups, BRANCH and DATA CENTER.
If the customer has traffic that we need to classify in order to provide TFO only optimisation, should the single class-map include the traffic in both directions? Ie., (assume the SERVER is 10.1.1.1 TCP Port 443). Should the class-map be configured as:
Class-Map
Line 1: DST IP 10.1.1.1 DST Port 443
Line 2: SRC IP 10.1.1.1 SRC Port 443
Or in this case is only the DST line required? And in which Device Group should the custom policy be applied? Or should it be applied to both Device Groups? If it should be applied to both Device Groups, then would it make more sense to have the policy-map in the Branch DG configured to match the DST traffic, and on the Data Center DG have a different class-map match the SRC traffic?
My confusion is how to classify the traffic (SRC or DST or Both - Separate classes for each or different lines within the same class-map), and where to apply the appropriate policy (both Device Groups, just Branch, just DC) and why...
I tried to apply a custom policy and the impact in the PoC was that the TCP Summary report stopped reporting the individual traffic classes showed 'other traffic' only. Can anyone explain why this may have occurred?
I hope this makes sense.

for instance like this:
policy-map police-in
class class-default
police rate 10 mpbs <optionally set burst>
policy-map shape-out-parent
class class-default
shape 10 mpbs <optional burst config>
service-policy shape-out-child
policy-map shape-out-child
class class-default
queue-limit 10 packets
int g 0/0/0/0
service-policy police-in in
service-policy shape-out-parent out
also have a look at CL 2013/2014 (orlando/sanfran) ID 2904 for more QOS details
and the support forum article of "asr9000 quality of service architecture"
xander

Export and Import of Configuration Data

Hi All,
I have created a number of custom properties, structures, groups, renderers, layout sets etc and would like to move them from Dev to Test system.
I have found the following in the help doco:
"Export and Import of Configuration Data"
http://help.sap.com/saphelp_nw04/helpdata/en/e1/029c414c79b25fe10000000a1550b0/content.htm
However I am unable to see its functionality in our portal systems (namely the Actions->Export and Actions->Import functions).
Our version of Portal is: 6.0.9.6.0
KM: 6.0.9.3.0 (NW04 SPS09 Patch3)
Therefore we should be able to see it? no?
Are there any special settings to see these buttons?
Cheers,
Vic

Thanks for your replies.
OK, so in otherwords, it is not available in SP09 and only in SP12+.
So, to "transport" this information I will have to manually reapply thes settings in the Test system!
Message was edited by: Victor Yeoh

HT203175 Running Windows 7 64, when installing, I get the error, 'itunes encountered an error and could not configure'. Ideas?

Running Windows 7 64, when installing, I get the error, 'itunes encountered an error and could not configure'. Ideas?

iTunes unknown error 13010

How we create custom infotype and how to configure with its subtypes.

hai abap-hr gurus,
how to create custom infotype and how to configure with its subtypes. when i am creating infotypes i am not getting how to configure subtypes.
plz help me for this with an example code.
thanks..
kiran kumar

Hi Kiran,
Please fallow the below steps to create the custom infotype. If you have any quires let me know.
For Creation of Infotype first Go to Transaction PM01, Enter the custom Infotype number which you want to create, it should be a 4 digit number and have to start with 9xxx.
then select the `Employee Infotype' radio button
after that select the `PS Structure Infotype'
then click on Create A separate table maintenance window appears
then Create a PS structure with all the fields you want on the infotype
Save and Activate the PS structure
now Go back to the initial screen of PM01
Click on `All' push button. It takes a few moments
Click on `Technical Characteristics. Infotype list screen appears
Click on `Change'(pencil) button
Now select your Infotype and click on `Detail' (magnifying glass) button
Give `T591A' as subtype table & also Give `T591S' as subtype txt tab
Give your subtype field as subtype field & Save and come back to PM01 initial screen
Click on `Infotype Characteristics' Infotype list screen appears
Click on `Change' (pencil) button & on New Entries
and then Enter your Infotype number and short text Here we have to set different Infotype Characteristics as per the requirement. (Better open another session with some standard Infotype's infotype characteristics screen and use as the reference
to fill yours). Now save ur entries
Now the Infotype is created and ready to use.
If you want to change the layout of the Infotype as per your
requirement
In the PM01 initial screenSelect `Screen' radio button and give
2000 as the screen name, then click on edit.
In the next screen.. Select `Layout Editor' and click `Change'.
Screen default layout appearshere you can design/modify the
screen..change the attributes of the fields..etc.
Save and activate. (Don't forget to `Activate at every level)
Regards,
Ramakrishna kotha.

Tool like PathPing that can pinpoint packet loss and can be configured to run for 24 hours

Does anybody know if there is a simple tool like PathPing that can pinpoint packet loss and can be configured to run for eg. 24 hours. I need it for windows XP preferable a cmd line tool like PathPing. Thanks Simon.

Thanks for your answer. I already downloaded winmtr.
Regards
Simon
From:
namohamm
To:
Simon Vyrdal/Sweden/Contr/IBM@IBMSE
Date:
2010-12-30 08:29
Subject:
New message: "Tool like PathPing that can pinpoint
packet loss and can be configured to run for 24 hours"
simonvyrdal,
A new message was posted in the Discussion thread "Tool like PathPing that
can pinpoint packet loss and can be configured to run for 24 hours":
https://supportforums.cisco.com/message/3258861#3258861
Author : Nael Mohammad
Profile : https://supportforums.cisco.com/people/namohamm
Message:

IIS 6 Metabase and IIS 6 configuration compatibility install

Similar Messages

Maybe you are looking for