IIS App domain is automatically getting restarted (w3wp.exe) in WCF Solution
Hi
IIS App domain is automatically getting restarted (w3wp.exe) in WCF Solution reason stated as "Config File Change" in event log
My Config (both web and Machine config) files are not changed. Anti Virus is not scanning or changing these files.
Any suggestions??
Hello Aparna,
This forum talks about .NET install related questions. You issue may more related to IIS forum.
http://forums.iis.net/
You can consider refer to some blogs like:
http://www.treeloop.com/blog/iis-application-domain-and-pool-recycling
And consider post on IIS forum.
Regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.
Similar Messages
-
My iPad is automatically getting restarted
Ipad air getting restarted.. and audio doesn't work it gets muted all of sudden
Try some basic troubleshooting:
(A) Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
(B) Try reset all settings
Settings>General>Reset>Reset All Settings
(C) Setup as new (data will be lost if you do not have backup)
Settings>General>Reset>Erase all content and settings -
IIS Crash because of a Application Popup w3wp.exe
We have a report system that runs on a Win2003 Server with Crystal Reports for .NET Framewokr 4.0. We installed the Crystal Runtime 13.0.
Now, every 5 hours the IIS server crash. At the time of the crash we have the following Event in the Event Viewer:
Event Type: Information
Event Source: Application Popup
Event Category: None
Event ID: 26
Description:
Application popup: w3wp.exe - Unable To Locate component: This application has failed to start because SmAgentAPI.dll was not found. Reinstalling the application may fix this Problem.
After a restart of the IIS Service, everthing works fine for another about 5 hours.
Does anyone have a clue for me?Hello,
What is happening is IIS is running out of memory and the error is popping up in one of our dll's. I don't believe it is the actual cause, CR just can't load any more dll's and that's the one when the system resources run out.
Make sure you are closing and disposing of you report objects when they are done with and using/adding GC.Collect to tell Windows to free up it's freed memory also helps.
To get more info you may need to add logging to your app as well as adding try/catch around every functions and write the catch to a log file to get more info and to help follow the flow.
Thank you
Don -
IIS charsh with error: Faulting application name: w3wp.exe
Hi Team,Question
I am new to Window Azure. Recently I encounter a issue on my production server, where my application hosted on Azure server was automatically getting down in every 2 Hrs,when i have checked the error logs I got the error:
Faulting application name: w3wp.exe,version: 8.5.9600.16384,time stamp: 0X5215df96
Please help me out to solve the problem.
Thanks,
Ashwin
Thanks AshwinHi,
Thanks for Posting.
Please refer to the following thread which talks about the same error, and suggests analyzing the crash dump
https://social.msdn.microsoft.com/Forums/en-US/5df570d8-1f19-47b3-9d76-e737e858aa6d/iis-crash-with-faulting-application-w3wpexe-faulting-module-mscorwksdll-version-205072742?forum=clr
If this does not help, i would suggest to get a Support Ticket created so that an engineer from the TechSupport team can personally look into this issue. you can create a support ticket from within the management portal or using the following link.
http://azure.microsoft.com/en-us/support/options/
Regards,
Nithin.Rathnakar.
**There is Duplicate thread for this issue, which i will be closing marking the link for this thread.
-
How di I prevent an automatic computer restart after exe install?
How do I stop the msi installer from restarting the computer after installing an exe? I have built an installer package of an application using LabView Project. When running the SetUp.exe the msi installer is automatically restarting the computer after the completion of the installation. I have the following in the setup.ini file.
[MsiEngine]
WinNTPath=supportfiles\WindowsInstaller-KB893803-v2-x86.exe
RequiredVersion=3.0.0.0
CommandLine=/passive /norestart
I am using LabView version 8.5.
Any help would be appreciated.
BethVHi, BethV,
Run setup.exe with /? option:
setup.exe /?
Then you will see following dialog:
It seems to be option /r:n - is what you needed
best regards,
Andrey.
Message Edited by Andrey Dmitriev on 10-31-2008 06:19 PM
Attachments:
ScreenshotInstaller.png 20 KB -
CF 5 server getting restarted automatically.
Hi
In one my production servers we have ColdFsuion 5. From the
last week , its automatically getting restarted.
I have observed the Server logs i found this issue. due to
this all my users are getting frustated, as they are missing the
data in the middle.
Ex:
"Information","1","02/20/08","11:03:32",,"The ColdFusion
Application Server started."
"Information","1","02/20/08","12:09:32",,"The ColdFusion
Application Server started."
how to overcome this? In what scenarios this issue will
happen?
could any one have an idea on this.
SrinivasHi
Check the Heap size. SAP Note:Note 723909
hope this helps
Rgards
-madhu -
BPEL instance getting restarted automatically
Hi All,
The BPEL instance is getting restarted automatically for every 10 minutes.
Below is the error found in the log.
Any help will be appareciated..
<2010-08-27 18:15:43,486> <INFO> <collaxa> <ConnectionFactoryImpl::init> Initialized connection factory jdbc/BPELServerDataSourceWorkflow
<2010-08-27 18:15:43,486> <INFO> <collaxa> <ConnectionFactoryImpl::init> Initialized connection factory jdbc/BPELServerDataSource
10/08/27 18:15:43 System.getProperty(dehydration.store)=null
<2010-08-27 18:15:44,044> <INFO> <collaxa> <ServerManager::__init> Detected datasource 'oracle'
<2010-08-27 18:15:44,061> <INFO> <collaxa> <gsServerSchemaManager::validateCompatibility> Detected database version '2.0.4'
<2010-08-27 18:15:44,062> <INFO> <collaxa> <ServerAdaptorManager::init> Initialized adaptors for platform 'ias_10g'
10/08/27 18:15:45
GMS: address is 10.90.188.91:11326
-------------------------------------------------------Hi,
Could some one please help me.
I suppose it could be of a below property?
Could some one please explain what this is all about?
<web-app application="jamagent" name="jamagent" load-on-startup="true" root="/jamagent" ohs-routing="false" /> -
Hi there,
I know there are a lot of posts about "Failed to Start" errors, but I have yet to see one that describes our problem.
We have workflows built with SharePoint Designer 2007
Normally these workflows start ok and work completely
Occasionally though they will all fail to start, instead showing "Failed on Start (retrying)" in the Workflow Status and the following exception in the SP Logs:
01/16/2015 15:43:27.28 w3wp.exe (0x15D4) 0x1A00 Windows SharePoint Services Workflow Infrastructure 936l High Engine RunWorkflow: System.Workflow.ComponentModel.Compiler.WorkflowValidationFailedException: The workflow failed validation. at System.Workflow.Runtime.WorkflowDefinitionDispenser.ValidateDefinition(Activity root, Boolean isNewType, ITypeProvider typeProvider) at System.Workflow.Runtime.WorkflowDefinitionDispenser.LoadRootActivity(Type workflowType, Boolean createDefinition, Boolean initForRuntime) at System.Workflow.Runtime.WorkflowDefinitionDispenser.GetRootActivity(Type workflowType, Boolean createNew, Boolean initForRuntime) at System.Workflow.Runtime.WorkflowRuntime.InitializeExecutor(Guid instanceId, CreationContext context, WorkflowExecutor executor, WorkflowInstance workflowInstance) at System.Workflow.Runtime.WorkflowRuntime.Load(Guid key, CreationContext con...
01/16/2015 15:43:27.28* w3wp.exe (0x15D4) 0x1A00 Windows SharePoint Services Workflow Infrastructure 936l High ...text, WorkflowInstance workflowInstance) at System.Workflow.Runtime.WorkflowRuntime.GetWorkflowExecutor(Guid instanceId, CreationContext context) at System.Workflow.Runtime.WorkflowRuntime.InternalCreateWorkflow(CreationContext context, Guid instanceId) at System.Workflow.Runtime.WorkflowRuntime.CreateWorkflow(Type workflowType, Dictionary`2 namedArgumentValues, Guid instanceId) at Microsoft.SharePoint.Workflow.SPWinOeHostServices.Send(SPWinOeWorkflow winoeworkflow, SPWorkflowEvent e) at Microsoft.SharePoint.Workflow.SPWinOeEngine.RunWorkflow(Guid trackingId, SPWorkflowHostService host, SPWorkflow workflow, Collection`1 events, TimeSpan timeOut)
What is strange, is that if I recycle the App Pool for the SharePoint site and then restart the workflows, they all work fine for a time. Until the next time they don't =)
The workflows must be configured ok since they do work complete at time, but I wonder if there is something with the memory usage of the app pool or something that is being re-compiled when the App Pool is recycled
The App Pool is set to recycle nightly, and when virtual memory > 1700MB or memory > 1000MB
Is anyone able to shed any light on this problem?? Or what steps I can take to debug the problem further.
Thanks in advance
Miguel Clark =)Hi Sudip,
Thanks for the link.
The workflows in question are SharePoint Designer workflows using standard actions, so unsure exactly how to check the 'correlation tokens' and 'DLLs', plus the workflow works fine as soon as I recycle the IIS App Pool, so do not see how these could be the
problem
As to the 'lodctr' commands, we have tried these in the past, to no effect. Though may try them again next time the issue comes up just to see if it does the same thing as recycling the app pool.
My big question here is "why would it suddenly work after recycling the app pool??" I feel like it must be something memory related, since recycling the app pool releases the resources used by the IIS worker process.
Miguel =) -
user cannot change password option is automatically getting unchecked while giving domain admin rights
Greetings!
"Domain Admins" falls into the category of protected groups and it is included in ADminSDHolder process. It is normal and was designed in order to prevent the modification to these privileged groups. More information on the link below:
AdminSDHolder, Protected Groups and SDPROP
Regards.
Mahdi Tehrani |
|
www.mahditehrani.ir
Please click on Propose As Answer or to mark this post as
and helpful for other people.
This posting is provided AS-IS with no warranties, and confers no rights.
How to query members of 'Local Administrators' group in all computers? -
N95 gets restart automatically while video recordi...
Whenever I try to record video more than 4-5 min, my N95 gets restarted automatically while recording and doesnt even save the video. But when I record smaller video say 1-2 min everything is fine. I have Phone from O2 germany and Nokia website says that I have latest software version installed.
Please help me to fix this problem.
thank youI have reboot problems as well. I haven't had the chance to try long video but it will reboot on almost any application.
As soon as the battery load is too high (it does get warm). I think it has to do with not being able to supply the current draw so the voltage drops and the phone reboots.
For me it was Maps that caused the reboot, or if I'm in maps and I get a phone call it would reboot. I could even get it to reboot when I was scrolling through the contact list non-stop.
See my post for more info. /discussions/board/message?board.id=smartphones&thread.id=102019 -
Lenovo Vibe Z2 Pro getting restart automatically.
Hi
I am using Lenovo Vibe Z2 pro and i have observed from last couple of week this phone gets restart automatically and then it's shows one sign in the top up of the screen, this sign is with the phone and red bubble in the secure icon.
Can anybody help me to understand and fix this problem ?
ThanksThe phone is DSDS(Dual Sim/Dual Standby) not DSFA(Dual Sim/Full active).
''If one of your SIMs are in use, the other SIM will automatically be put on hold.'' Put on hold=not available
''Could you tell me how i can disable the secure zone ?'' It would be better to put that question HERE.
Hope this helps.
Regards
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as ''ACCEPT AS SOLUTION"!
Unsolicited PM's will not be answered! ....Please post your question/s in the appropriate forum board.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество -
How do I get Droid apps to quit automatically starting up?
I have an app killer, but my battery drains really fast, even when I'm not using apps or internet. When I go back in and look, I have a lot of unnecessary apps running when I didn't start them, like facebook and twitter and market, etc. I don't even have a twitter account. I understand the messenger and weather being open, but ei drains my battery faster when the other big apps start up automatically and I'm not sure how to get them not to. Does anyone know how to do this? Thanks
If you have 2.2 the the task killer makes your apps run in loops (draining your battery).
2.2 has optimized how apps run. Even if the apps show they are running they might not be using resources.
To make this short you should only use the task killer to kill frozen apps. Th new OS will take care of the rest. -
Cancelled messages getting restarted automatically
Hi all,
I am facing one issue in pi 7.0, we cancelled some messages in sxi_monitor, but after cancellation also these messages are getting restarted automatically. please help me to solve these issue.
Regards
Pradeep P NHi Raja
Yes we configured restart of failed messages, but after cancelling the messages i think it won't get restart automatically. if i am wrong please correct me.
Rgds
Pradeep P N -
SharePoint 2013 multi App domain issues
Hello,
All urls on purpose have a space character, this is because the forum didn't let me enter URLs.
We have a problem with the new feature of SharePoint 2013 March PU “New-SPWebApplicationAppDomain”.
We are implementing this feature for a client in Windows Azure. This lead to several technical issues to overcome and in previous LAB tests it seems that we have overcome these problems, using named binding instead of wildcard, and SNI.
Goal:
1 Webapplication with three zones:
Default zone: https: //portal-ntlm.contoso.com
Intranet zone: https: //portal-adfs.contoso.com
Extranet zone: https: //portal-fba.contoso.com
Default zone in NTLM of course is to make Search work.
With the new feature described in http ://technet.microsoft.com/en-us/library/dn144963.aspx we should be able to get App Domains working on all three (or at least two out of three zones).
In my LAB (Single server farm, running SP2013 SP1) I currently configured two zones, both NTLM to test the basics.
Default zone: https: //portal.contoso.com Intranet zone: https: //portal-ta.contoso.com
I have enabled the feature using these commands:
$contentService = [Microsoft.SharePoint.Administration.SPWebService]::ContentService
$contentService.SupportMultipleAppDomains = $true
$contentService.Update()
Iisreset
Then I do this:
New-SPWebApplicationAppDomain -AppDomain app1.fabrikam.com -WebApplication https: //portal.contoso.com -zone default -port 443 –SecureSocketsLayer (This command works)
and then:
New-SPWebApplicationAppDomain -AppDomain app2.fabrikam.com -WebApplication https: //portal-ta.contoso.com -zone intranet -port 443 –SecureSocketsLayer (This one doesn’t)
Then we get this powershell error in RED:
New-SPWebApplicationAppDomain : The IIS Web Site you have selected is in use
by SharePoint. You must select another port or hostname.
At line:1 char:1
+ New-SPWebApplicationAppDomain -AppDomain apps2-ta.talentenik.nl
-WebApplication ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~
+ CategoryInfo : InvalidData: (Microsoft.Share...cationAppDomain:
SPCmdletNewWebApplicationAppDomain) [New-SPWebApplicationAppDomain], Argum
entException
+ FullyQualifiedErrorId : Microsoft.SharePoint.Administration.SPAppCmdlets
.SPCmdletNewWebApplicationAppDomain
Extra info:
I have tried using a single IP, multi IP, remove current IIS Binding, add the binding already etc. Nothing seems to work.
When I change the PORT number of the second command to anything else it binds to the expected IIS Site but on the wrong port nr.
The most strange thing also: I have a working set of VMs that actually works. I created a snapshot of the working situation. Reverted back to the before snapshot and tried to replay my steps but I keep running into issues when I try to add the second app-domain.
Can anyone help me set this up.
Thx
Stefan Peters
I was in the same situation with my on-premises environment. I did a little bit more investigation and checked the code behind New-SPWebApplicationAppDomain. I wrote a full article about this issue
http://www.vioreliftode.com/index.php/new-spwebapplicationappdomain-the-iis-web-site-you-have-selected-is-in-use-by-sharepoint-you-must-select-another-port-or-hostname/
I also provided a way to bypass the limitation and be able to reuse the 80 and 443 ports for multiple app domains. -
I am having troubles deselecting calanders, When i deselect a calendar, it automatically gets selected again?
I skimmed through this very long post but from what I read, this sounds much more like a coverage issue with your network than a device issue. I have not seen or heard of this issue before and I do not have this issue personnally and & I use the music app quite frequently while working in the yard.
The DND feature should not be a factor at all if you're sure it's turned off. I always recommend restarting your phone by holding down the home button + the lock button for 10-12 seconds until the Apple logo appears. Once the phone reboots, do a test to see if this has helped to resolve the issue.
If not, go to Settings > General > Reset > Reset Network Settings. Then, test it out again. Post back if neither of these solutions solve your issue.
Maybe you are looking for
-
Can someone help me upload my backup on my computer to my new iphone 4?
-
Put created filename into variable
using oracle 11.2.0.3.0 I have a procedure that creates a csv file on my server. It works flawlessly. My question is how after the file is created, can I get the filename and put it into a variable in the same procedure. create or replace PROCEDURE "
-
TV Shows by episode only?
Wonder why it is that we can no longer download entire seasons of many popular TV shows at a discount? I won't be paying $46 for a 23-episide season of anything!
-
So frustrated. For 6 months I have been able to export my iMovie videos to YouTube, no problem. I have also been able to export my iMovie videos into QuickTime format so they can be viewed on PCs without having to import them into iDVD. Now all of a
-
Simple but frustrating question
When I pressed f6, it used to create a keyframe duplicate of the most recent keyframe on that layer. For some reason, today I got on and f6 is making blank keyframes! even when I go to modify>timeline>convert to keyframes --- still blank! What happen