IIS ARR 3.0 does not have route to server farm options.

Hi Support,
I have downloaded IIS AAR 3.0 and install it on Windows 2008 server.
After that, I proceed to create server farm and added few CAS servers. 
Then I go to URL rewrite and under Action->Action Type on the dropdown box,  I can't seem to find "Route to server farm" option.
Can anyone help? Thanks

Hi,
About the IIS question please post to the IIS forum.
IIS support forum
http://forums.iis.net/
Thanks for your understanding and support
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

  • Remote Desktop Virtualization Host does not have a license server

    I'm receiving an error when attempting to connect to a virtual desktop that is part of a virtual desktop collection. The server that hosts the virtual desktop collection also hosts a session host collection and the RD licensing server. The event log of the
    server issues event 1156 "The Remote Desktop Virtualization Host server does not have a Remote Desktop license server specified. To specify a license server for the Remote Desktop Virtualization Host server, use the RDS module for Windows PowerShell."
    The RD Licensing Manager indicates that volume licenses have been installed and are available as seen below. The RD Licensing Diagnoser indicates no issues.
    I found a MS blog entry for Windows 2008 R2 that indicates the following: "Because there is no GUI interface for specifying licensing configuration on an RD Virtualization Host server, support has been provided in Windows PowerShell to enable this scenario.
    As a result, a VDI administrator who does not want the (RemoteFX-enabled) RD Virtualization Host server’s licensing settings to be
    centrally managed (from the RD Connection Broker server) can manually configure these settings on the RD Virtualization Host server(s) in the VDI deployment by using the following Windows PowerShell cmdlets:", but I'm not sure if this applies to Windows
    2012 as well.
    Thanks.
    Dale
    Dale Smith

    Hi Dale,
    Based on my research, please try to use this PowerShell command to set the RD licensing server.
    Set-RDLicenseConfiguration -LicenseServer
    Server FQDN -Mode PerUser
    Set-RDLicenseConfiguration
    http://technet.microsoft.com/en-us/library/jj215465.aspx
    Also, please note that the RDVH server must be a member of a VDI collection.
    Hope this helps.
    Jeremy Wu
    TechNet Community Support

  • HP Photosmart Premium c309g-m does not have a mirror image print option-hel​p please

    After twice being disconnected from HP chat help, I have landed here in this forum and need some help please...
    The option to print a mirror image is not anywhere in my printer tools/options. I need this to be able to print some iron
    images. I think the chat folks could not help me and just hung up on me, they seemed confused as to what the problem is. Does anyone have any idea how to fix this, it's not a matter on turning it on either, it's not there to turn on kwim.
    thanks
    Donna
    This question was solved.
    View Solution.

    Check the iron-on packaging for ink specs.   Make sure to use HP iron-on paper.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • TS1389 when i hit store in the menu bar as shown it does not have an authorize this computer option. how am i supposed to authorize my mac?

    it doesn't have a authorize this computer option.

    You have an up-to-date version of iTunes installed on your computer, and what options do you see on the Store menu ? You should see something like :

  • TC does not have "Access disks over WAN" option, how do I fix this?

    Hello,
    My time capsule has the lastest firmware installed as of 12/28/11. I have it setup with (bridge-mode). There is no option to use the TC over WAN. There is only the option to access TC over WAN using Bonjour. Can someone please explain why this option is not avavible and how to fix it? If anyone needs more information please fell free to ask me.
    Thanks,
    Brett

    If the TC is bridged.. there is no wan port. LOL!!
    So there is no need to access it over wan.. because it doesn't have one.
    You can fix it by using it in router mode.. so it has a wan port again.
    Or.. you can simply access it via port forwarding of port 548 on the existing router.
    You can only remotely access AFP. You cannot access it remotely any other way.. without using vpn that is.

  • HP Officejet Pro 8610 All-in-One Printing Preference does not have Print Last Page First option

    HP Officejet Pro 8610 All-in-One printer:  Printing Preference missing Print Last Page First option.  Print lots of multipage documents.  Spending enormous amount of time resorting pages. 
    Prior to this printer?  .... grab printed stack -  staple  -  DONE! 
    Now?   Have to resort every document!
    Anyone out there have a solution?

    Reply to mkjohnson42. It doesn't matter what application I'm in. The option is NOT there. Just to confirm, I started from Word 2010, Excel 2010, a web page using Internet Explorer, Foxfire and Chrome. Plus, I did the old stand-by of going to Printers and Devices>Preferences. Under Preferences I have the choice to print on both sides of paper but NO Print Last Page First. I REALLY did check ALL of this before resorting to the Community. So, I really don't understand your question. Sorry.

  • HP Photosmart Premium c309g-m does not have a mirror image print option-help please

    After twice being dropped from HP chat support I have laned in this forum to get some help please.
    I need to be able to print mirror images from my printer and it simply is not a option-it's not a matter of turning on the
    option, it is not there at all.
    Thanks
    Donna

    Check the iron-on packaging for ink specs.   Make sure to use HP iron-on paper.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • I am using firefox 3.6.23 on my old computer, I have a new laptop that I would like to transfer the bookmarks from the old to the new, but the old computers firefox does not have the sync tab under options, what now?

    I have a tower running windows XP, using Firefox 3.6.23. I have a new laptop running windows 7. I have just downloaded firefox 7. Now I want to bring the bookmarks form my old tower computer using firefox 3.6.23 to the new laptop using firefox 7.0. I got the instruction on how to sync the two computers, but I cannot find the sync tab under options in the firefox 3.6.23 computer. Will upgrading the tower's firefox to a newer version give me the sync tab under options?

    With firefox 3.6 I think you may have had to use sync as a separate add-on. If so try finding and installing that. Alternativly export your bookmarks from Firefox 3.6, then move that file, using any suitable method (eg removable media, email atacchment, computer network) to somewhere the new laptop can access it and imprt the bookmarks. Remember
    * back up your bookmarks (on both machines) before doing anything
    * importing standard firefox bookmarks overwwrites existing bookmarks
    * (if you just have a few bookmarks on one machine, consider exporting as HTML, when you import those they will append, instead of overwriting the existing files)
    See
    * [[backing up and restoring bookmarks]]
    * [[backing up your information]]
    * [[importing bookmarks and other data from other browsers]]

  • HT201593 Itunes 12 does not have the "Manually manage music" option

    I have itunes 12 and the "manually manage music and videos" is not there. "Manually manage videos" is the only option. I use itunes for work and I NEED a fix. I am unable to drag and drop as well.

    Hello there, Jenks855.
    When wanting to manually manage content on your iOS device, the Knowledge Base article you were referred from provides some great information and practical steps for troubleshooting:
    Manage content manually on your iPhone, iPad, and iPod - Apple Support
    Manually add items to your device
    Connect your device to your computer.
    Open iTunes. Make sure that you have the latest version.
    Choose the content that you want to add to your device from your iTunes library.
    Drag the content to your iPhone, iPad, or iPod. A panel should appear. Locate your device.
    What if I can't manually add content to or remove content from my device?
    To manually manage your content, check to make sure that the "Manually manage music and videos" option is turned on. Then:
    Connect your device to your computer.
    Open iTunes. Make sure that you have the latest version.
    Locate and click on your device.
    Click the Summary tab.
    Click the box next to "Manually manage music and videos."
    Click Apply. If you see a message that your device is synced with another library:
    iPhone can only add music or video from a single iTunes Library.
    iPad and iPod can add music from multiple iTunes Libraries, but video from only one iTunes Library.
    If you choose to manually manage your movies and music with the new iTunes Library, the iTunes content currently on your device will be erased and replaced.
    You can’t manually manage music while using iTunes Match on your device.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • HT3625 My Macbook Air does not have this "Use audio for:" option, as it has been excluded from Airs for whatever reason. How do I change my audio output to input without this?

    If I have to buy an audio-usb converter let me know.
    Although if this is an option exclusive to Pros and I do, then this is a little ridiculous Mr. Ghost of Steve Jobs.
    Especially considering how Airs don't have their own section here on the forums
    Thank you for whoever responds! All the idiot "how to" links on Google have me a little frustrated

    Nevermind, posted this in Air section
    It didn't give me that option initially.

  • I have downloaded the latest Lightroom CC but it does not have the HDR and Panorama option. The version I have is 5.7 and CC tells me it's the latest.

    I'd like to download the latest version for these features but I can't seem to. What's happening?

    See TS1538: iOS: Device not recognized in iTunes for Windows.
    tt2

  • I upgrade my iPhone 4 to iOS 6 and if I'm close to my router the signal indicator comes on and the phone connects to the wifi just fine, but if I step away from the router my phone does not have signal and cannot connect to Internet

    i upgrade my iPhone 4 to iOS 6 and if I'm close to my router the signal indicator comes on and the phone connects to the wifi just fine, but if I step away from the router my phone does not have signal and cannot connect to Internet 

    I can use my iPhone only with wifi .
    I don't get any signal and I can not connect to
    The Internet without wifi.
    When I don't use my wifi from home I have lost all connection to the net
    My iPhone is on and working it does not shut down

  • SSL VPN message "This (client) machine does not have the web access privilege."

    Hello!
    I am trying to configure the SSL VPN (WebVPN) and I am almost done but when clicking on the URL's I configured in the bookmarks, I get the message "This (client) machine does not have the web access privilege. Please contact your SSLVPN provider for assistance." I looked through the many tutorials and guides in existence and none talks about such error and the fix for it. In fact, if I search the net for this error message I get only one match, in the Cisco website, where is say that "The client computer does not meet the security criteria of having web access functionality through the SSL VPN gateway." and as fix it gave this tip "Check the URL to the gateway or contact the administrator if it persists." So, nothing on the website about what this issue is and how to fix it. I will provide my IOS configuration and hopefully someone will spot the issue. Here it goes:
    version 12.4
    service timestamps debug datetime msec
    service timestamps log datetime msec
    no service password-encryption
    hostname R1
    boot-start-marker
    boot-end-marker
    logging message-counter syslog
    no logging buffered
    enable secret 5 $1$1LLX$u7aTc8XfNqPZhPVGwEF/J0
    enable password xxxxxxxx
    aaa new-model
    aaa authentication login userAuthen local
    aaa authentication login sdm_vpn_xauth_ml_1 local
    aaa authorization network groupauthor local
    aaa session-id common
    crypto pki trustpoint TP-self-signed-1279712955
    enrollment selfsigned
    subject-name cn=IOS-Self-Signed-Certificate-1279712955
    revocation-check none
    rsakeypair TP-self-signed-1279712955
    crypto pki certificate chain TP-self-signed-1279712955
    certificate self-signed 01
      3082023A 308201A3 A0030201 02020101 300D0609 2A864886 F70D0101 04050030
      31312F30 2D060355 04031326 494F532D 53656C66 2D536967 6E65642D 43657274
      69666963 6174652D 31323739 37313239 3535301E 170D3130 30333233 31313030
      33375A17 0D323030 31303130 30303030 305A3031 312F302D 06035504 03132649
      4F532D53 656C662D 5369676E 65642D43 65727469 66696361 74652D31 32373937
      31323935 3530819F 300D0609 2A864886 F70D0101 01050003 818D0030 81890281
      8100A8EF 34E3E792 36660498 9801F934 E8A41865 3599EA35 B073AC91 D7A53AF4
      A4390D2F CB3DB2DE 936B28F0 A25F3CE1 6F40FD9E E79096F2 F89620E0 B31A7B34
      649BBA22 AE44CB55 9F38BF0C 2F2770CF 8380C167 C17D760C 380E28E4 FF7D6874
      9EFC310A 2AA60835 F1AA384F CD1A0173 19C98192 EBFBD531 24CB9203 EA9E7D54
      B2C30203 010001A3 62306030 0F060355 1D130101 FF040530 030101FF 300D0603
      551D1104 06300482 02523130 1F060355 1D230418 30168014 0D9D62EC DA77EAF3
      11ABF64D 933633F9 2BA362DC 301D0603 551D0E04 1604140D 9D62ECDA 77EAF311
      ABF64D93 3633F92B A362DC30 0D06092A 864886F7 0D010104 05000381 81006853
      48ED4E3E 5721C653 D9A2547C 36E4F0CB A6764B29 9AFFD30A 1B382C8C C6FDAA55
      265BCF6C 51023F5D 4AF6E177 C76C4560 57DE5259 40DE4254 E79B3E13 ABD0A78D
      7E0B623A 0F2D9C01 E72EF37D 5BAB72FF 65A176A1 E3709758 0229A66B 510F9AA2
      495CBB4B 2CD721A7 D6F6EB43 65538BE6 B45550D7 A80A4504 E529D092 73CD
       quit
    dot11 syslog
    ip source-route
    ip dhcp excluded-address 192.168.0.1 192.168.0.10
    ip dhcp pool myPOOL
       network 192.168.0.0 255.255.255.0
       default-router 192.168.0.1
       dns-server 87.216.1.65 87.216.1.66
    ip cef
    ip name-server 87.216.1.65
    ip name-server 87.216.1.66
    ip ddns update method mydyndnsupdate
    HTTP
      add http://username:[email protected]/nic/update?system=dyndns&hostname=<h>&myip=<a>
    interval maximum 1 0 0 0
    no ipv6 cef
    multilink bundle-name authenticated
    vpdn enable
    vpdn-group pppoe
    request-dialin
      protocol pppoe
    username cisco privilege 15 password 0 xxxxxxxx
    crypto isakmp policy 3
    encr 3des
    authentication pre-share
    group 2
    crypto isakmp fragmentation
    crypto isakmp client configuration group vpnclient
    key cisco123
    domain selfip.net
    pool ippool
    acl 110
    crypto ipsec transform-set myset esp-3des esp-md5-hmac
    crypto dynamic-map dynmap 10
    set transform-set myset
    reverse-route
    crypto map clientmap client authentication list userAuthen
    crypto map clientmap isakmp authorization list groupauthor
    crypto map clientmap client configuration address respond
    crypto map clientmap 10 ipsec-isakmp dynamic dynmap
    archive
    log config
      hidekeys
    interface Loopback0
    ip address 10.11.0.1 255.255.255.0
    ip nat inside
    ip virtual-reassembly
    interface Loopback2
    description SSL VPN Website IP address
    ip address 10.10.10.1 255.255.255.0
    interface Loopback1
    description SSL DHCP Pool Gateway Address
    ip address 192.168.250.1 255.255.255.0
    interface FastEthernet0
    description $ES_LAN$
    ip address 192.168.0.1 255.255.255.0
    ip nat inside
    ip virtual-reassembly
    duplex auto
    speed auto
    interface BRI0
    no ip address
    encapsulation hdlc
    shutdown
    interface FastEthernet1
    interface FastEthernet2
    switchport access vlan 2
    interface FastEthernet3
    interface FastEthernet4
    interface FastEthernet5
    interface FastEthernet6
    interface FastEthernet7
    interface FastEthernet8
    interface ATM0
    no ip address
    no atm ilmi-keepalive
    pvc 8/35
      encapsulation aal5mux ppp dialer
      dialer pool-member 1
    bundle-enable
    dsl operating-mode auto
    interface Vlan1
    no ip address
    interface Dialer1
    ip ddns update hostname myserver.selfip.net
    ip ddns update mydyndnsupdate host members.dyndns.org
    ip address negotiated
    ip nat outside
    ip virtual-reassembly
    encapsulation ppp
    ip policy route-map VPN-Client
    dialer pool 1
    ppp chap hostname xxx
    ppp chap password 0 xxxx
    ppp pap sent-username xxx password 0 xxxx
    crypto map clientmap
    ip local pool ippool 192.168.50.100 192.168.50.200
    ip local pool sslvpnpool 192.168.250.2 192.168.250.100
    ip forward-protocol nd
    ip route 0.0.0.0 0.0.0.0 Dialer1
    ip http server
    ip http authentication local
    ip http secure-server
    ip nat inside source static tcp 192.168.0.2 21 interface Dialer1 790
    ip nat inside source static tcp 192.168.0.15 21 interface Dialer1 789
    ip nat inside source list 102 interface Dialer1 overload
    ip nat inside source static tcp 10.10.10.1 443 interface Dialer1 443
    ip nat inside source static tcp 10.10.10.1 80 interface Dialer1 80
    access-list 102 deny   ip 192.168.0.0 0.0.0.255 192.168.50.0 0.0.0.255
    access-list 102 permit ip 192.168.0.0 0.0.0.255 any
    access-list 110 permit ip 192.168.0.0 0.0.0.255 192.168.50.0 0.0.0.255
    access-list 144 permit ip 192.168.50.0 0.0.0.255 any
    route-map VPN-Client permit 10
    match ip address 144
    set ip next-hop 10.11.0.2
    control-plane
    banner motd ^C
    ================================================================
                    UNAUTHORISED ACCESS IS PROHIBITED!!!
    =================================================================
    ^C
    line con 0
    line aux 0
    line vty 0 4
    password mypassword
    transport input telnet ssh
    webvpn gateway MyGateway
    ip address 10.10.10.1 port 443 
    http-redirect port 80
    ssl trustpoint TP-self-signed-1279712955
    inservice
    webvpn install svc flash:/webvpn/svc_1.pkg sequence 1
    webvpn install csd flash:/webvpn/sdesktop.pkg
    webvpn context SecureMeContext
    title "My SSL VPN Service"
    secondary-color #C0C0C0
    title-color #808080
    ssl authenticate verify all
    url-list "MyServers"
       heading "My Intranet"
       url-text "Cisco" url-value "http://192.168.0.2"
       url-text "NetGear" url-value "http://192.168.0.3"
    login-message "Welcome to My VPN"
    policy group MyDefaultPolicy
       url-list "MyServers"
       functions svc-enabled
       svc address-pool "sslvpnpool"
       svc keep-client-installed
    default-group-policy MyDefaultPolicy
    aaa authentication list userAuthen
    gateway MyGateway domain testvpn
    max-users 100
    csd enable
    inservice
    end
    Thank you!

    Hi,
    Please check SAP note:
    2004579 - You cannot create a FR company from a Package
    Thanks & Regards,
    Nagarajan

  • I have an older Power Mac and it does not have the ability/hardware to connect to my wireless network.It is on 2nd floor which has no ethernet connections available. How can I get connected wirelessly?

    I have an older Power Mac desktop computer. I do not believe it has the hardware to connect wirelessly to my wireless network. The computer is located on the 2nd floor of my house where there are no ethernet network connections so I would have to use wireless to connect to the internet. I have a wireless LinkSys router downstairs that I use to create my wireless network. I also have a Time Capsule upstairs but without the ability to plug an ethernet network cable into it, I cannot use it to get internet access t the computer.
    What hardware can I add to give me the abiity to connect the Power Mac to my wireless network?
    Is there a way perhaps to link routers? IE. Can I somehow have my existing wireless router downstairs connect wirelessly with the Time Capsule upstairs that i could then plug the Power Mac into for connectivity?
    Not sure what version of OS this computer is currently using but do know it does not have the newer dual Intel processors. As such I am unable to update to newer OS versions.

    While uselessSABOTAGE's advice is great, in case of future issues, it would helps us in the future if you would post accurate tech specs of your model iMac.
    You info states you have an older IMac PowerMac, but is also says your OS X version is OS X 10.7.2.
    This is not possible. OS X 10.7.2 Lion only runs on Intel CPU Macs.
    Please, go up to the Apple symbol in the upper top left of OS X main menu bar. Click the symbol. Then click About this Mac. A popup window appears that gives some basic info. Then, click the More Info button and both post your iMacs complete specs by selecting/highlighting all of the info and copy paste this into a reply to this post, editing out your iMac's serial number. Then update the info you posted in your user profile with some of this new found data for future postings.

  • Internet Connection - Your Apple wireless device does not have a valid IP.

    I just bought an Apple TimeCapsule and set it up normally, following instructions to my Arris cable network on the Videotron provider here in Quebec, Canada. The TimeCapsule did appear as a wireless device on my MacBook Pro (after updating the AirPort software from the provided CD - as was instructed). I went through the whole installation process to obtain at the end this error:
    Internet Connection - Your Apple wireless device does not have a valid IP.
    The only provided instructions were to check the cable and then contact your Internet provider. Well it seems clear to me that if I contact my provider and say that the internet connection works fine directly on my computer, also fine through my "normal" wireless router but not with my new TimeCapsule, I won't get much of a response.
    After a lot of research, a friend indicated the solution in my case.
    You have to really reset the cable modem to convince it to start giving out IPs again.
    To do this:
    1. Unplug your TimeCapsule (possibly you might have to reset to factory defaults - see the documentation)
    2. Unplug your cable modem
    3. Reset your cable modem by pressing the reset button with a pen (or something) for several seconds.
    4. Plug your cable modem back in and let it reboot/restart - until the lights are back on.
    5. Plug in your TimeCapsule
    Everything should now work and you can restart your AirPort set-up on your Mac.
    Good luck!

    My ISP is AOL.  The service is DSL via a broadband modem.  Somewhere during the setup process there appears to be a communicatiosn issue between the Airport Extreme Base Station and the DSL modem.  When I hook the DSL modem directly to my iMac I can connect to the internet without any issues. 
    I tried the factory reset and the DSL modem reboot process described in other posts and seemed very close to success...until the internet setup step.  That is where this issue first presented itself.

Maybe you are looking for