IIS not serving page properly

The issue is related to:
http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=72&catid=602&threadid =1263709&highlight_key=y&keyword1=IIS
I have a master/detail spry section (using Spry 1.6) running
off of II6. Problem is some of the scripting on the site is running
inconsistently. I am using an HTM table as the data source in a
file with .htm extenstion.
The page loads fine, but none of the elements on the left
hand master side are clickable. I changed the mime type of the JS,
xml, etc, but the behavior has not change.

Similar Messages

My printer is not taking pages properly.

my printer is not taking pages properly and also the pages bend towards left side while taking initially.

Hello kgr1,
Welcome to the HP Forums.
I see that you are having some paper feed issues.
I do have a few suggestions that we can try in the attempt to resolve the issue.
First off, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
Please check the Paper Clear out door that is located on the bottom of the unit for any bits of paper that may have been torn off in the past.
Let me know how you made out and if you have any other questions or concerns, please feel free to ask.
Thanks for your time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Live View Not Rendering Page Properly

Can someone explain why the LIVE VIEW in DW5.5 wouldnt render the page properly? I have a site that I developed, and when I view it in every browser... FF, IE, Opera, Safari, etc there are no errors and the page renders properly. However, when I view a page in the Live View, my footer section (which is done by a server side include) renders skewed far to the right. It must have something to do with that SSI, because I have other SSI's on the page and they are fine. It's just that one single one (the footer).
As I said, the site renders perfectly in all browsers, just not in Design View. I am evaluating DW5.5 for use using the trial period, so perhaps there is some feature that's turned off? The code for the site is a bit too much to put here, but right now I'm just looking for reasons that there would be such a drastic difference.
Thanks.

To paste code, go to the web forum (email doesn't work for this).
Click on 'Use advanced editor'
>> (insert icon) > Syntax highlighting > plain.
Paste your CSS & HTML code into the box.
Code looks like this........
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

Template not updating pages properly

I have several pages, all started from the same template. The path to an image in the template is <img src="../index.php" width="140" height="200" alt="Balgonie Baptist Church Logo"> but on the pages that are updated from this template they are:
<img src="index.php" width="140" height="200" alt="Balgonie Baptist Church Logo"> . The 2 periods from the source path are not there on the pages. I think something like this happened before, what am I doing wrong? I'm a newbe.

#1 .PHP is not an image extension. It is an HTML page containing server-side code.
Images should have file names with .jpg or .png or .gif.
#2 template.dwt files reside inside a Templates folder. That's why links in templates contain the leading dots -- ../images/somefile.jpg
#3 When you create a new page from template and save it to the root of your site, DW correctly removes the leading dots for you -- images/somefile.jpg. At least that's how it should work.
Nancy O.

Safari not loading page properly

Hi all,
I have a fairly specific problem with Safari (8.0.3 on OS X 10.10.2) in that the Stripe login page does not load properly for me. All I see when I go here is basic HTML: http://dashboard.stripe.com/login
In terms of troubleshooting, I have tried the following
Disabled Extensions
Disabled plugins
Emptied Caches
Cleared cookies and other website data
I then decided to create a new user on my Mac to see what would happen. In the new user's Safari, the page loads exactly as it should.
So, my question is, what else can I do to troubleshoot this? Have I missed something?
Cheers,
Pete

Back up all data before proceeding.
Quit Safari if it’s running. Then select
           ▹ Force Quit…
from the menu bar. A small window will open with a list of running applications. Safari may appear in that list, even though you quit it. If so, select it and press return. Close the window.
Step 1
Hold down the option key and select
          Go ▹ Library
from the Finder menu bar. Delete the following items from the Library folder (some may not exist):
          Caches/com.apple.Safari
          Caches/com.apple.Safari.SearchHelper
          Caches/com.apple.SafariServices
          Caches/com.apple.WebKit.PluginProcess
          Caches/com.apple.WebProcess
          Caches/Metadata/Safari
          Preferences/com.apple.WebKit.PluginHost.plist
          Preferences/com.apple.WebKit.PluginProcess.plist
          Saved Application State/com.apple.Safari.savedState
Leave the Library folder open. Try Safari again. If the problem is solved, stop here. Close the Library folder. If you still have a problem, continue.
Step 2
Restart the computer in safe mode. Certain caches maintained by the system will be rebuilt.
Safe mode is much slower to start up than normal.
When the login screen appears, restart as usual (not in safe mode) and test. There's no need to log in while in safe mode.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t start in safe mode. In that case, ask for instructions.
Step 3
If Safari still doesn’t work, quit, go back to the Finder, and move the following items from the open Library folder to the Desktop (again, some may not exist):
          Cookies/Cookies.binarycookies
          Internet Plug-Ins
          Preferences/ByHost/com.apple.Safari.*.plist
          Preferences/com.apple.Safari.Extensions.plist
          Preferences/com.apple.Safari.LSSharedFileList.plist
          Preferences/com.apple.Safari.plist
          Preferences/com.apple.WebFoundation.plist
          PubSub/Database
          Safari
          SyncedPreferences/com.apple.Safari.plist
Here, "*" stands for a long string of letters, numbers, and dashes.
Note 1: You are not moving the Safari application. You’re moving a folder named “Safari.”
Note 2: This step will remove your Safari extensions, if any, and their settings. If you choose to reinstall them, do so one at a time, testing each time to make sure you haven’t restored the problem.
Try again. Your settings and bookmarks will be lost. The default set of bookmarks will be restored. Delete them all.
If Safari is now working normally (apart from the lost settings), look inside the “Safari” folder on the Desktop for a file named “Bookmarks.plist”. Select
          File ▹ Import Bookmarks...
from the Safari menu bar. Import from that file. Recreate the rest of your Safari settings. You can then delete the items you moved to the Desktop.
If the issue is still not resolved, quit Safari again and put all the items you moved to the Desktop back where they were, overwriting the newer ones that may have been created in their place. You don’t need to replace the files you deleted in Step 1. Stop here and post again.
If you don’t like the results of the last step, you can undo it completely by quitting Safari and restoring the items you moved or deleted in that step from your backup, overwriting any that were created in their place.

Safari 5.1.5 not loading pages properly after Java install

Safari kept telling me I need to install a java runtime, so I finally let it, and now certain pages (like accuweather.com) take forever to load unless I turn off Java in preferences. The page background will appear but the "loading whatever # of #" hangs on the last number and just sits there until the page finally appears. Has anyone else had this problem, and if so, how can it be fixed?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

DNG from Pentax K5 IIs not importing/displaying properly

I am runing LR 5.3 and PS6 on Win 7 Ultimate with latest updates as of 2/17/2014. Some of my DNG from the Pentax K5 IIs are not importing or displaying correctly. I have attached screenshots from LR/PS and Silkypix (Pentax Util) for comparison. Please let me know how to correct the problem. I will send the DNG file if necessary.

If the JPGs are sidecars then they’d be deleted along with any DNGs you choose to delete, so you’ll have to be doubly not lazy to get the JPGs to replace the bad DNGs.
I think if this happened to me the basic procedure I’d follow is, pending some other idea that would be easier:
Make sure the setting to treat RAW+JPG as separate files is OFF.
Mark/flag/rate/keyword all the bad DNGs with some unique designation, andif the JPGs are still sidecars then they’ll also have the designation.
Filter by that unique designation.
Select and move all these images to some other new folder from within LR using LR commands (drag-and-drop, right-click move). If the JPGs are still sidecars then they’ll automatically be moved along with the DNGs.
Remove these images from LR but don’t delete from the hard-drive.
Use an OS-level command to delete all the DNGs from that folder, leaving the JPGs.
Use an OS-level command to move these JPGs back to their original folder.
Turn ON the setting to treat raws+jpgs as separate files.
Synchronize the original folder with the Import new files setting enabled.
Import these JPGs.
Turn OFF the setting to treat raws+jpgs as separate files if you want.
This process would reset any develop settings you’d applied to any of the images because you’re removing them from the catalog. I think there may be plug-in that will synchronize settings from raws to jpgs but I’m not sure if it works for hidden sidecar jpgs or not. If you were to use such a plug-in then you’d need to do it before removing the images from your catalog.
This process is would not be easy to do if the corrupted files are scattered throughout your photos rather than in a single folder because you’d likely want to do the steps above for each folder separately.

Problems with Safari not loading pages properly, Problems with Safari not loading pages properly

I updates to the newest version of Safari via apple and now none of my pages load correctly. Most of the times I have to reload the page several times to get everything loaded. When I first load a page there are little question marks where images should be, sometimes it doesn't load at all and says it can't find the server or something. Some sites just load super funny. All I did was load the newest version of Safari. Anyone have any idea on how to fix this?

http://support.apple.com/kb/TS3408
http://docs.info.apple.com/article.html?path=Safari/5.0/en/9313.html
http://docs.info.apple.com/article.html?path=Safari/5.0/en/9274.html

New MacBook Air does not read Pages properly

I migrated my old MacBook Air (2 years old) to my new MacBook Air (one month old) transferring Pages application and many documents in Pages, which I use to edit a magazine.
At first my new MBA refused to open any Pages documents, so I re-installed iWork from CD (using Remote Disc from my iMac). Now my new MBA does open Pages documents, but with disrespect for fonts:
- what was in bold appears in regular font
- what was in italics appears either in regular font or bold+italics
This is a complete disaster as it means I cannot work in the magazine when I travel with my MBA. Plus, I have already given away my old MBA to a friend!
Can anybody help?
Thank you !
Isabel

Lelel wrote:
I migrated my old MacBook Air (2 years old) to my new MacBook Air (one month old) transferring Pages application and many documents in Pages, which I use to edit a magazine.
Did you moved the folder
Macintosh HD:Library:Application Support:iWork '09:
from the old machine to the new one ?
This folder contain a lot of required items.
Without them, iWork's applications can't work.
Don't forget that the license clearly state that *_you must remove the app from the old machine_*
Yvan KOENIG (VALLAURIS, France) mardi 15 février 2011 11:04:24

HTTP error 0 testing not serving php pages please help

Hello everyone,
I am using DWCS3, the free version of MAMP on my MacBook Pro Leopard 10.5.6.
I have built a customer registration form with a Transitional <!DOCTYPE>. I have been following the instructions from The Essential Guide to Dreamweaver CS3, using a wizard to build a registration form, in chapter 15.
When I try to preview the form in the web browser, I get a white screen.
When I click the live data button I get an; HTTP error 0 message occured while attempting to request the file http://localhost:8888/mywebsite/page_S9INUKZB.php from the testing server.
possible reasons:
1. Files in MacHD/Applications/MAMP/htdocs/mywebsite with .php extension are not being executed by the testing server.
2. The MacHD/Applications/MAMP/htdocs/mywebsite does not map to http://localhost:8888/mywebsite URL on the testing server.
I've gone over the site definitions several times and have configured MAMP differently twice, using ports 80 and 3306 and also 8888 and 8889. The same problem has happened in both instances here is my site definition info:
Local info:
Site name: mywebsite
Local root folder: MacHD:Users:myname:Desktop:mywebsite
links relative to document: http://localhost/
Remote info:
Access: Local/Network
Remote folder: MacHD:Applications:MAMP:htdocs:mywebsite
Testing server:
Server model: PHP/MySQL
Access: Local/Network
Testing server folder: MacHD:Applications:MAMP:htdocs
URL prefix: http://localhost:8888/mywebsite/
Web sharing is turned off.
Dreamweaver/Preferences/Preview in browser/preview using temporary files is turned off, yet in my HTTP error 0 message there is a string of characters after the page name, suggesting that dreamweaver is using temporary files.
I have attached a compressed copy of the customer registration form maybe the problem is the page. I have gone round and round in circles with this and I can't seem to sort it out can somebody please help me.
Thankyou.

Hello David,
Thanks for getting back to me, sorry for the late reply, I've been away for a few days.
I have done what you suggested, and altered the links relative to document: http://localhost:8888/mywebsite/
I have also restarted dreamweaver and mamp.
Nothing has changed when I try to view the page through the browser I get a white screen and the HTTP error 0 is still displaying, With the same message as before.
I have since created a new form, connected it to my user table, and populated the table with info, and that worked.
I then added the php validating code as suggested in chapter 15, pages 481 through to 485. I've also checked the code against your example page register_user_03.php.
However when I put the page on the testing server and try to view it, all I get is a white screen, and an HTTP error 0 the testing server is not executing pages with a .php extension. Or the URL prefix isn't mapped properly.
I have also checked all my settings in MAMP and left a question on the forum but they haven't answered.
Is there a setting or connection that I need to enable in Apache? I'm stumped.
I'm hoping you might have some tricks up your sleeve.
Thanks

Iphone 4 error message while in wifi "safari can not open page because server stopped responding" after iOS6 update

I am currently using my Iphone 4 in wifi networks only after canceling my cell phone plan. Over the weekend I did the IOS6 update on the iphone as well as updated my macbooks itunes and OS X operating systems updates that were available. Since that my iphone's safara app won't connect. After it trys to connect for a minute or 2 I recieve the message: "safari can not open page because server stopped responding". However ALL other apps that require the phone to be connected to wifi for use work properly, i.e app store, imessage, pinger, facebook, etc. I have checked all network setting and they looked right to me. Anything I'm missing, ideas to try, or am I sol (lol)? Safari worked perfectly before the update so I thought I might have done something wrong or forgot to change some type of setting.
Thank you!

If you can access Facebook while on Wifi at home, but you are unable to access it while away running on your carrier's 2G network, I could phone your carrier. You have already completed the Cellular Data troubleshooting for the iPhone, so any limitations keeping your from connecting to Facebook over cellular will have to be answered by your carrier.

Adding Server Behavior Call Virtual() but I am on IIS not Apache

When I add a new server behavior I get "virtual('parts%tracker/Connections/PartsTrackerDB.php')" at the top of the page, but my server is IIS not apache, so I am thinking the virtual() function is incorrect. As it is now I get a HTTP 500 error when trying to load the page.
How do I fix this? Isn't there somewhere to tell DW to us IIS functions not Apache?
I'm on DW CS5.5.

Ben, thank you for your reply. I have php interpretation on the server. In fact, if I change virtual() to require() it works just fine. It is my understanding that virtual() is an apache specific call. I have googled this and i have found several articles that detail this problem. They say, I should be able to select between an apache and IIS call but I havent found one that details the steps to do that. I can make it work by manually adjusting the code, but I know there is a setting Im missing that will make it automatic.

Can not refresh page after save properly(When not saving master record)

I am using jdeveloper 11g R2 (11.1.2.3) JSF Facelet
In some use case I have Address as master table and Person as detail table
For some business reason I need to don't save same addresses
eg:
If +1 Test St+ is in database already and new user coming and adding this address with new person
I need to use the row in database not creating a new address
I do saving in doDML method of Address with some hashing algorithm and it is fine
My problem is that I can not refresh page after save properly
User coming to page think Adding a new address and a new person but in fact no new
address added because of business I describe above
Any ideas how I can implement this?
Appreciate that
Regards
Mohsen

Hi,
from your description it is not clear why the page doesn't refresh. It could be a problem in your implementation code - who knows. What if you perform the address check on a command button that actually submits the new address? If the check returns true (address exists) you would call row.refresh(forget new row); and re-query the view object so the address coming from the database is displayed. If you wanted to use the doDML then yuou need to be aware that doDML doesn't help removing the row the user created. It just ignores the database update but the entity is still around, which in my suggested solution wont be the case.
Frank

The Report Server page comes up on local server, but the page does not open from clients

Hello,
The Report Server Page opens up just fine on the local server, but page does not open up from desktops and client PCs. SSRS is installed on a Windows Server 2008 R2 server and with SQL Server 2008 R2 SP2
Clients are using IE 11 and they see:
Oops! Internet Explorer could not connect to tumdv-fsql01
How can make this site accessible from clients?
Thanks
Paul

That did not work.
What port numbers specifically does SSRS use? I will check the firewall.
http://100.100.100.100/CengeaReports/Pages/Folder.aspx
When I add the IP Address and try the link again, IE says "This page can not be displayed". When I try the Fix connection problems, IE says:
"The website is online, but it is not responding to connection attempts."
Paul

TS1398 my problem is my iphone 4s is connected to the internet(wi-fi) with full signal strength but freezes when browsing and says "Cannot Open Page, Safari could not open page because the server stopped responding".

my problem is my iphone 4s is connected to wi-fi with full signal(3 bars) strength but freezes when browsing and says
"Cannot Open Page"
"Safari could not open page because the server stopped responding"
I already reset the iphone to its factory settings and erase all contents but still the browsing speed freezes or not searching at all. Sometimes it will work and fast but then the problem uccors every now and then. Iv'e been using iphone 4 for two years and I still have it and works fine compared to this IPHONE 4S.

Settings → scroll down to Safari → in Safari settings, I selected both Clear History and Clear Cookies and Data.
IF that does not work -
Restart or reset your iPhone, iPad, or iPod touch - Apple Support
Finally - if problem still present -
Go to Settings>General>Reset
Reset the network settings - you will need to add the password of your home WiFi in your phone once more
The device should turn itself off & back on then go into Settings>Wifi and join your network

IIS not serving page properly

Similar Messages

Maybe you are looking for