IIS service not showing when I use the get-exchangeCertificate | fl cmdlet

Hello All,
I just installed a 3rd party digital certificate to my Exchange 2010 via powershell then assigned the 4 services IIS, pop, smtp, imap but when I use the get-exchangecertificate | fl cmdlet the IIS service is not showing.The rest of the services were fine.
During the process of installing the certificate via powershell, I got a message that says: Do you want to enforce SSL communication on the root web
site? If not, rerun the cmdlet with the -DoNotRequireSSL parameter. I said No to all and the operation continued. By the way, I also invoke the iisreset /restart right after installing the digital
certificate. I then proceeded to install my root certificate and intermediate certificates. All were imported successfully via certificate snap-in. When I access the exchange 2010 EMC console, the status for the Exchange Certificate still says pending certificate
signing request. Not sure if that is related at all to the fact that IIS service is not showing amongst the assigned services listed. Any idea why IIS service is not in the list of assigned services for Exchange certificate?? Can I re-run my powershell and
repeat my steps, but this time just assigned IIS service alone? Or should I re-run powershell altogether and assign all 4 services again??? Also, what about the pending certificate signing request in the EMC console should I process and complete the request??
Any advise is appreciated. Let me know please.
Thanks!
Lotusmail1
Franz Garcia

Hi Lotusmail1,
Please run the following command to just assign IIS service to this third-party certificate (using certificate 5113ae0233a72fccb75b1d0198628675333d010e as a example), then run Get-ExchangeCertificate to check it again:
Enable-ExchangeCertificate -Thumbprint 5113ae0233a72fccb75b1d0198628675333d010e -Services IMAP,POP,IIS,SMTP
Regards,
Winnie Liang
TechNet Community Support

Similar Messages

Firefox 19.0 PDF data is not showing when we use the Preview in firefox option.

I am using FireFox 19.0 Version. In my application, I create the adobe PDF and it should shows on click on link button. On previous version it was working. but in 19.0 it is not working.
In Firefox option i am using preview in firefox option to show the PDF on browser tab.
Please suggest how can i resolve this problem.

These solutions to not help our viewers who also have this problem. All they know is the pdf is not displaying correctly and naturally assume there is something wrong with the pdf.
This function should be disabled until it reliably displays pdfs.

Why the subvi can not show,when i use call by reference node.

I used a call by reference node in function pallete,i follow the labview manuals and examples(dynamic load example), but i can not see the subvi show when the program running.
Attachments:
comshow.vi ‏75 KB
交流稳态频谱.vi ‏19 KB

Hi Sunny,
Open your subVI,
1. go to File->Vi Properties (or Ctrl+I)
2. choose Window Appearance category
3. choose Customize
4. check "Show Front Panel When Called" (and "Close Afterwards ..")
5. save the VI, close it and try again.
Let us know if it's OK ...

When I use maps, and search directions using the public transport, it only gives me one option.. Why cant I decide to use the train or the bus? because on this occasion its not showing me to use the tube despite this being the obvious and quickest way?

I am trying to get directions around london using the 'maps' on the homepage, however when I ask for the directions to use public transport it isn't using the london underground? why..?

hello, this sounds like an issue with adware present on your pc. please perform all these steps:
# [[Reset Firefox – easily fix most problems|reset firefox]] (this will keep your bookmarks and passwords)
# afterwards go to the firefox menu ≡ > addons > extensions and in case there are still extensions listed there, disable them.
# finally run a full scan of your system with different security tools like the [http://www.malwarebytes.org/products/malwarebytes_free free version of malwarebytes] and [http://www.bleepingcomputer.com/download/adwcleaner/ adwcleaner] to make sure that adware isn't present in other places of your system as well.
[[Troubleshoot Firefox issues caused by malware]]

I have been organizing my bookmarks into folders. There are a bunch of bookmarks that appear on the Bookmarks Menu that do not appear when I used the Organize Bookmarks option. Therefore I can't organize them. How do I get at them and move them to folders

I used Organize Bookmarks to put some bookmarks in folders. When I had done all the bookmarks that appeared outside of folders in the Organize Bookmarks window, I closed it and looked at my bookmarks menu. Under my folders were some other bookmarks that I hadn't seen in Organize Bookmarks and when I used it again, they still weren't visible. Therefore, I couldn't move them into folders.

Update - I discovered that the entire list of bookmarks can be accessed in the Organize Bookmarks window by clicking on the icon for Bookmarks Menu.
This seem like odd interface behaviour to me.
All the other software I use follows the pattern that an icon with a triangle to the left, which you click on to expand the menu tree downwards, shows the entire contents of the category when you click on the triangle. In other words, you don't get a different response by clicking on the icon from what you get by clicking on the triangle.
It also seems odd to me that when an unsorted bookmarks folder is automatically provided that unsorted bookmarks would not be placed there by default.
Anyway, by getting the list of bookmarks displayed this way I was able to simply right-click on items in the list and delete them, as I thought I should be able to do. Problem solved. Organize Bookmarks interface found to be somewhat unintuitive.

A picture that was saved in a word document is not showing when I open the document in Pages. Is there a way to recover the image, or a specific type of file that Pages only recognizes?

My professor posted the course syllabus online and at the time, I was using OpenOffice. Whenever I opened the document the image would show perfectly fine, but I switched over to Pages because it had a template I know one of my professors wants a project to be done in. When I opened the same document in Pages to see if it would look the same, the error box popped up and said the image could not be imported and there was a blank box where the picture should have been. My question is, is there any way that I could somehow get the image to show or was it saved in a format that Pages doesn't recognize?

Open the document with Open Office. Select and Copy the image. Paste it into Pages.
If that doesn't work,
Open the document with Open Office. Select and Copy the image. Launch Preview. Press command-N (New document from Clipboard). Save the Preview file as a PDF or JPEG, as appropriate. Insert that in Pages.
Regards,
Barry

My ipod touch will not charge when I use the FM transmitter.

I have a FM ransmitter that will play music when I attach my 3rd generation ipod touch but it will not charge it. But I receive an error message that my ipod doesn't support this device. I use an adapter but it doesn't work. I've used this adapter in the past with other FM transmitters and it would charge my ipod. Thank you.

I have the same problem, my ipod connects to various wifi networs supplying internet to other devices but I cannot use safari... pages connect/ download endlessly. However Map app works fine. Wifi signals strong.
I have reset network setting but all this has done is to wipe all my passwords and networks, and I still cannot connect to the internet. Frustrating!

Help: Records not showing when cube is placed under the Multiporivider

Hi Experts,
I have a Cube called Bcube with char Plant,calm year/month, material and Key Figure, Pqty
When I generate a report on this Cube, everything looks fine and I see plants, year, etc in the report
There are 2 other cubes:
MCube also has char Plant,calyear/month, material and Key Figure: Pqty, Sqty, TQty, AQty
DCube also has same as BCube: with char Plant,calyear/month, material and Key Figure Pqty
When I place all three cubes under the multiprovider, the values from the BCube does not show up in reports
e.g. in a simple report such as
Row : Plant
Columns: Pqty, Sqty, TQty, AQty
In the Multiprovider, under the Indentification of Characteristics, I checked the boxes for all three cubes whenever the same charactertic in all cubes showed up for identification: e.g..
InfoProvider InfoObject
Bcube----
Plant
MCube-------Plant
DCube -
Plant
and same for. e.g. 0Calyear
and same for Key Figures, e.g. I checked all 3 boxes for PQty which exists in each of the cubes
1. Why is my data for BCube not showing when reporting against the multiprovider?
2. what does it mean by checking the 3 boxes for Plant? and checking the 3 boxes for 0Calyear.
Thanks

Hi,
regarding your questions:
1. When I run listcube against the multiprovider, I only went to the output list to select the fields I needed in the output; then entered the particular cube e.g. BCube in the infoprovider field. That was it (NO other selection) and I got the described results I explained earlier. If you have a specific test for me to try, please let me know.
2. Please find the settings in both characteristics and key figures for all cubes in the MULTIPROVIDER maintenance screen:
Characteristic Assighment:
0calyear -- 3 boxes checked for BCube, DCube & MCube
Plant -- 3 boxes checked for BCube, DCube & MCube
0Material-- 3 boxes checked for BCube, DCube & MCube
Key Figure selection
PQty-- 3 boxes checked for BCube, DCube & MCube
Sqty --checked for DCube, this key fig is ONLY in DCube
TQty--checked for DCube, this key fig is ONLY in DCube
AQty--checked for DCube, this key fig is ONLY in DCube
I hope this helps you to guide me.
Or, were you referring to mappings in the transformations?
Thanks

I am looking for a specific photo in my event folder, it does not show up, yet when I use the search feature, the photo is there. Why doesn't it show up in the folder?

I am looking for a specific photo in my event folder, it does not show up, yet when I use the search feature the picture is there. Why doesn't it show up in the folder?

What system and iPhoto version are you running?
If your're using iPhoto 9 or later Command (right) - click on the photo in the search window and select Show Event in the Contextual menu.
That will take you to the event where the photo is.
OT

I hit Forget Network and now cannot get back onto my wireless home network. All of my other computers and iphones are fine. How do I get the network back? It shows in my list of networks but when I use the password and try to join it says not connected.

I hit Forget Network and now cannot get back onto my wireless home network. All of my other computers and iphones are fine. How do I get the network back? It shows in my list of networks but when I use the password and try to join it says not connected.

See if the iPad will accept the password after you restart it. It's worth a try.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
You could also try a reset as well.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

I created a website with iWeb but use GoDady for hosting it rather than MobileMe. The images on my Gallery page do not show at all on the external domain but they DO show when seen on MobileMe. Has anyone encountered this problem before? Many thanks!

Hello al!
I created a website with iWeb but use GoDady for hosting it rather than MobileMe. The images on my Gallery page do not show at all on the external domain but they DO show when seen on MobileMe. Has anyone encountered this problem before? Many thanks!

Just create a new page (or use the existing photo page) on your external site and use html to add an iframe sized to the page and link it to the mobilme gallery page. Works for me just fine when showing my gallery from a yahoo site.
like this
<iframe scrolling="off" allowTransparency="true" frameborder="0" scrolling="yes" style="width:100%;height:100%;border:none" src="http://gallery.me.com/your_account_name"></iframe>

I have a folder with 10 folders inside it, 8 of the folders will not function when I use "show view options".

I have a Folder with 10 Folders inside it, 8 of the Folders will not function when I use "show view options", they always default back the default. The "show view options" works on all my other Folders in my system, even on the first two of the Folder in question. How can I correct it? I have tried every thing I can think of, even deleting the Folders & reintalling them. For some strange reason the "show view options" only does not work on the last 8 Folders in the Folder in question.

Instead GarageBand recognize my keyboard and i can play normally, also, if it can help, those are the Audio and Midi Logic Preferences and the Controller Surfaces Setup with the keyboard connected :

I sent in my iPhone 6 for repair. I used restore on the loaner phone I was given, and the contacts, texts, reminders, and Safari pages all showed up. My phone is back, and when I used the restore function again, those items are missing.

I sent in my iPhone 6 for repair. I used restore on the loaner phone I was given, and the contacts, texts, reminders, and Safari pages all showed up. My phone is back, and when I used the restore function again, those items are missing. I do not use iCloud because I have no wifi at home, limited data available for regularly backing up, and I have a 64GB phone and don't wish to pay to upgrade from the 5GB iCloud storage. Am I doing something wrong? It worked so seamlessly on my loaner phone that I am completely stumped as to why it will not restore those items to my original phone again.

The iphone is designed to be synced to your computer or cloud service. Your contacts should be in whatever program/service you have chosen to sync.
If you have failed to do this, then they are likely gone.

Hundreds of my iPhoto pictures will not be copied and will not show when I double-click on them. When I do in iPhoto an exclamation surrounded by a triangle appears. Though I can see the picture in the small tiles below it will not expand.

Hundreds of my iPhoto pictures will not be copied and will not show when I double-click on them. When I do in iPhoto an exclamation surrounded by a triangle appears. Though I can see the picture in the small tiles below it will not expand. I also cannot attach any of these pics into an e-mail or into any other file. I have already went through all 3 Repair options and when that did not solve it went through a complete Rebuild. Any Help?! Any Suggestions on how to fix this?! I have spent almost 2 days now going through all of the published help.
I have backups going back 6 months - I have not had the real need to check every album before - but - all of my backups also have this same problem.

The triangle with the ! indicates that the connection between the thumbnail and the orginal is missing - this can be caused by many things including database corruption and user action emoving the originals photos on urpose or by accident
If the database is corrupted then rebuilding is the solution - backup and depress the option and command keys, launch iPhoto and rebuild your database -- if the iPhoto rebuild does not cure the problem then download iPhoto Library manager and use its rebuild command which creates a totally new library leaving the existing one untouched
If you have deleted the photos then you need to start over with a new library and import the photos you have not deleted into it
You can select one of the problem photos and use the reveal original in finder commander (file menu) to see if the original is there - if it is a finder window will open showing it
LN

I have an apple ID which I use to sign into icloud for my iPad and iPhone.But when I use the same ID for setting up iCloud on my Macbook it says INCORRECT ID or password, try again. I tried changing my passwords but it does not work for the macbook.

I have an apple ID which I use to sign into icloud for my iPad and iPhone.But when I use the same ID for setting up iCloud on my Macbook it says INCORRECT ID or password, try again. I tried changing my passwords several times but it does not work for the macbook.

You will have to provide the correct password to delete the existing account, if you have tried but are not getting the password reset email, contact Apple for assistance by going to https://expresslane.apple.com, then click More Products and Services>Apple ID>Other Apple ID Topics>Lost or forgotten Apple ID password.

IIS service not showing when I use the get-exchangeCertificate | fl cmdlet

Similar Messages

Maybe you are looking for