IIS to Weblogic Bridge

Hi,
          Does anyone know how to set up the bridge?
          Many Thanks.
          Hui

http://homepage.beasys.com/docs45/admindocs/isapi.html
          Hui Li wrote:
          > Hi,
          >
          > Does anyone know how to set up the bridge?
          >
          > Many Thanks.
          >
          > Hui

Similar Messages

Problem with IIS- WebLogic bridge

Hi!
We have configured the IIS-WebLogic bridge for WebLogic 6.0 (SP1), with IIS
4.0 on two separate machines. This works on URLs which directly refer to
pages lying on the same machine as WebLogic, but some links which refer to
WebLogic properties file and then determines the page to be displayed (e.g.
include files). These work when the exact URL (including the IP Address and
port no. of the WebLogic Server) is pasted in the browser address window,
but fail when the proxied hyperlink is clicked from another page, or the
proxied URL is pasted in the address window.
Can anyone help. This is slightly urgent.
thanks and regards,
Prajesh
Prajesh K. Verma
Eclaton eBDU India Pvt. Ltd.
Huis van Eclaton
25, Lavelle Road
Bangalore 560 001
Tel: +91 80 2996569
Email: [email protected]
http://www.eclaton.com

It looks like you have the sendRedirect() problem.
We will convert the relative uri into Absolute URL in the sendRedirect().
the logic looks something like:
if (url is an absolute url) { //i.e: http://host:port/dummy.jsp
response.setHeader("Location", url);
sendError("302");
} else if (url is an absolute uri) { //i.e: /dummy.jsp
//prepend protocol, host and port info
} else if (url is a relative uri) { //i.e: dummy.jsp
//cacluate the context path based on the current request
//i.e: you are request http://iis:7001/include/index.jsp
PathTrim=/weblogic is set in the iisproxy.ini
//so the Location header looks like:
//http://iis:7001/weblogic/include/dummy.jsp
As you can see you may need to specify the redirected uri
to fall into the rules of "proxy by path" or "proxy by mime type" if you want
the iis to proxy the request properly.
"Prajesh K. Verma" <[email protected]> wrote:
Hi!
We have configured the IIS-WebLogic bridge for WebLogic 6.0 (SP1), with
IIS
4.0 on two separate machines. This works on URLs which directly refer
to
pages lying on the same machine as WebLogic, but some links which refer
to
WebLogic properties file and then determines the page to be displayed
(e.g.
include files). These work when the exact URL (including the IP Address
and
port no. of the WebLogic Server) is pasted in the browser address window,
but fail when the proxied hyperlink is clicked from another page, or
the
proxied URL is pasted in the address window.
Can anyone help. This is slightly urgent.
thanks and regards,
Prajesh
Prajesh K. Verma
Eclaton eBDU India Pvt. Ltd.
Huis van Eclaton
25, Lavelle Road
Bangalore 560 001
Tel: +91 80 2996569
Email: [email protected]
http://www.eclaton.com

Weblogic Bridge "failed and will reconnect later"

The enterprise architecture is as follows:
1 Physical machine where I have 2 VMs on this machine, and each VM I have 1 domain, 1 Cluster and 1 managed server, and the second VM I have the replicated what I have in first VM.
In first domain I have the OSB, in the second domain I have SOA.
What I need ? Send information of queues (topics) of First Domain (OSB) to second domain(SOA).
At first the only thing I did was:
In the first domain I created OSB JMS Server, JMS Module, Connection Factory and Queue Topic.
In the second domain SOA I replied the same thing but with different names.
Then I created the bridge with configuration default between the first domain and the second domain, the bridge and when active it generates me a message Weblogic Bridge "failed and will reconnect later"
I did a test on my local machine windows where I created two domains, and the same procedures you did above, but the point was funcinou been activated now for the enterprise environment I'm not managing to make it work, you could tell me what is wrong . in both cases restarted the weblogic server as the machine itself the question that ran on my machine and machine company no.
If you can give me a light thank.

This is a bug (6973877, derby only) which has been fixed in 4.5 build14 and 4.4u2p1. Thanks for reporting. The problem is the missing "FOR BIT DATA" in LOG_RECORD column in derby table definition MQTMLRJMSBG41 in broker default.properties file
- LOG_RECORD VARCHAR(2048) NOT NULL,\
+ LOG_RECORD VARCHAR(2048) FOR BIT DATA NOT NULL,\

Apache-Weblogic Bridge does not work?

I've gone thru' the documentation regarding setting up of apache-weblogic bridge, but still it does not work. Does anyboday have any more details regarding this...EnvironmentOS - Solars 5.7Weblogic - 5.1 SP 8Apache 1.3.12

I've given up and had to go back to running "Double NAT" which also reports as a "problem" within the AEBS, but I just "ignore" it so the light will always be green.
It still ***** though, as "Double NAT" is also a reason for "Back to my Mac" not working properly, but how the ** am I supposed to avoid Double NAT when the wireless will not work in bridged mode?!

Aborting uploads through Apache/Weblogic bridge

Hi,
I have an application to which people should be able to upload files,
however only of a certain size. So if I detect that the file is too
large (based on Content-Length), I return an errorpage and don't read
the data from the browser. This is allowed according to rfc 1867 (which,
though it is obsoleted, is the one the HTTP1.1 rfc refers to on the
matter - also the obsoleting rfc doesn't say anything on the matter) and
all browsers seems to handle this.
However, once I go through the Apache/Weblogic bridge the behaviour
changes. When the browser sends the POST request to the bridge, the
bridge relays it on to the Weblogic server and my code. I immediately
determine that the file is too large, and returns the previously
mentioned errorpage. But, the bridge doesn't stop recieving the file
from the browser until it has got the entire file and then it returns a
standard bridge POST timeout error (and the timeout has definately not
been reached).
Any ideas?
CAPUT A/S Morten Jensen Phone +45 70 12 24 42
Nygade 6 Senior Developer Fax +45 70 11 24 42
DK-1164 Kbh K [email protected] http://www.caput.com

Add the following attributes:
<Location /re >
WLProxySSL ON
EnforceBasicConstraints false
</Location>
Original example in [http://m-button.blogspot.com/2008/11/how-to-configure-weblogic-to-use-ssl.html]
I hope this helps.

VAJ3.5.3 Weblogic Bridge problems SP10?

Hi,
There seems to be some progressive memory leak in Visual-Age when looking up for
EJB on Weblogic, anybody faced such problems?
AND ...
In VAJ3.5.3 Weblogic Bridge documentation ... The docs/userguide.pdf says that
(In service-PAck for Integration-Kit) Import VAJ35weblogic510spX.zip where 'X'
is the service-pack number BUT...I don't find VAJ35weblogic510sp10.zip Anywhere
on BEA site. Please let me know where to get it from if it is ever available.
How do you upgrade the bridge to SP10?
Thanks, Harish.

Harish,
SP10 for the VAJ I-Kit is available at -
http://commerce.bea.com/downloads/weblogic_server_tools.jsp.
Thanks,
Nirav.
Harish SK wrote:
Hi,
There seems to be some progressive memory leak in Visual-Age when looking up for
EJB on Weblogic, anybody faced such problems?
AND ...
In VAJ3.5.3 Weblogic Bridge documentation ... The docs/userguide.pdf says that
(In service-PAck for Integration-Kit) Import VAJ35weblogic510spX.zip where 'X'
is the service-pack number BUT...I don't find VAJ35weblogic510sp10.zip Anywhere
on BEA site. Please let me know where to get it from if it is ever available.
How do you upgrade the bridge to SP10?
Thanks, Harish.--
Nirav Chanchani
BEA Systems, Inc.

Apache-weblogic bridge problems with virtual hosting

Hi,
Can we set apache-weblogic bridge where apache webserver is configured
as virtual hosts and each Virtual Host is mapped to a WebLogic server
instance running on separate port ?
Please provide doc or reference or your comments if you have solved this
problem
Thanks
Shriniwas

The above comments notwithstanding, there's one outstanding line in your post that seems crucial:
Also if I type on my browser the name of another secondary (or virtual) domain name in the form http://domain2.com it brings the website hosted under the primary domain which is domain1.com. In case I type http://www.domain2.com than it works as it should and displays the website hosted under this domain name.
As far as Apache is concerned, 'domain2.com' and 'www.domain2.com' are completely separate entities. They have to be otherwise if all domain2.com traffic went to this site you'd never be able to host different sites within the domain (e.g. blogs.domain2.com, wiki.domain2.com, blah.domain2.com, etc.). In other words, there is no automatic relationship between a hostname and sub-records of that hostname.
So what's happening here is Apache is seeing a request for 'domain2.com' which does not match any of its configured virtual hosts, so it handles the request via the default site. If you request www.domain2.com this matches your virtual host configuration so Apache serves the alternate content.
The fix is simple - trivial, even - you just need to tell Apache all the hostnames that match this site - in this case if you've configured the site's primary address as 'www.domain2.com' and you want it to also respond to requests to 'domain2.com' then add 'domain2.com' to the list of Server Aliases in Server Admin.

Overrding default Apache-Weblogic bridge error message

We are running WLS 5.1 sp5 with Apache as Webserver. I want to know how
could I display more user freindly error messages when
weblogic is down and apache is working. Currently we get the default
Weblogic-Apache down page.
I tried putting
ErrorPage http://www.mydomain.com/error.html
in apache conf file. Now I do not get the default message, but now it can
not find the above url.
I am able to this url directly in the browser. Please help ?

[email protected] (srinivasa reddy) wrote in
<39bb039e$[email protected]>:
>
hi,
I have a basic question, does webloigc support apache-weblogic
bridge with mod_ssl/any ssl installed on apache.
thanks & regards
[email protected]
There is a mod_wl_ssl.so in sp4 (i believe). mod_ssl extends Apaches API
and thereby breaks the WebLogic bridge. For raven installations you need
mod_wl_ssl_rave.so because raven extends the API even further.
Joel
E-Mail: (jbf (at) proceedo dot com)

Overriding default errror page for Apache-Weblogic bridge

I am writing this problem again as nobody has replied me with any solution.
I want to overide the default error page that comes up when weblogic is down
for some reason in apache-weblogic bridge. I looked into the weblogic
documentation and specfied the following in the apache configuration file
ErrorPage http://www.domain.com/systemerror.html
But for some reason it is not able to locate the domain as well as the page.
But if try the same url in the browser, it works. Please help.
Rakesh

I am using the plugin and using the error page successfully. Apache and WL
use the same document root, and the error page is located within the
document root:
Within the httpd.conf, I have:
<IfModule mod_weblogic.c>
# Config file for WebLogic which defines parameters for plugin
Include conf/weblogic.conf
</IfModule>
Within the weblogic.conf, I have:
ErrorPage unavailable.html
Provide your configuration settings.
"Rakesh Gupta" <[email protected]> wrote in message
news:39d3bcd3$[email protected]..
Well, we are using weblogic supplied apache plugin and I am following all
the steps that is specified in setting up apache plugins in weblogic
documentation. I do not think it is apache network problem as apache is
working fine.
The think the problem is somewhere in the weblogic-apache plugin module.
"Jesse E Tilly" <[email protected]> wrote in message
news:[email protected]..
[email protected] (Rakesh Gupta) wrote in <[email protected]>:
I am writing this problem again as nobody has replied me with any
solution.
I want to overide the default error page that comes up when weblogic is
down for some reason in apache-weblogic bridge. I looked into the
weblogic documentation and specfied the following in the apache
configuration file
ErrorPage http://www.domain.com/systemerror.html
But for some reason it is not able to locate the domain as well as the
page. But if try the same url in the browser, it works. Please help.
Rakesh
as worded, that sounds like a network setup problem on the apache server
side.
however, it seems that you want a server-connection-timeout error toreturn
an specific error page via the plug-in. This all depends on how theplugin
works. If it is how I think it works, there needs to be an INI
setting
to sepcify a page. Why? Because the plug-in effectively has control of
the response. It either needs a way hand control back to the web serveror
needs to have error pages of its own.
BEA?
Jesse

RMI Through Apache-Weblogic Bridge

Hi,
How to use RMI in apache-weblogic bridge
Thanks,
Siva E.

[email protected] (srinivasa reddy) wrote in
<39bb039e$[email protected]>:
>
hi,
I have a basic question, does webloigc support apache-weblogic
bridge with mod_ssl/any ssl installed on apache.
thanks & regards
[email protected]
There is a mod_wl_ssl.so in sp4 (i believe). mod_ssl extends Apaches API
and thereby breaks the WebLogic bridge. For raven installations you need
mod_wl_ssl_rave.so because raven extends the API even further.
Joel
E-Mail: (jbf (at) proceedo dot com)

WL 9.2 - IIS plugin - WebLogic Realm

We are upgrading from WebLogic 8.1 to WebLogic 9.2. We use IIS 6.0 as a proxy. IIS has an ISAPI plugin that authenticates our users using SPENGO and then forwards the request to WL.
In 8.1, the request was authenticated by our ISAPI plugin, before the request was forwarded to our application running in WL.
In 9.2, logs show that the request gets authenticated by our ISAPI plugin, but when the request is forwarded to WL, WL sends back another authentication prompt to login to WebLogic. I am using the default WebLogic security realm without any changes.
HTTP header
WWW-Authenticate: Basic realm="WebLogic Server"
If I access our application directly on WebLogic (bypassing IIS), I can access the application without being prompted to login by WL. The ear does not have any security configured in it. I believe having an authenticated header in the request to WL is causing the additional request. I would like to disable WL from asking to login to its security because we already have our security mechanism in place on IIS.
Is there a way to disable WL security?
Thanks.

In case anyone else gets this error, it is a known issue that WebLogic support provided the resolution.
In config.xml, I had to add the following tag before the end of the </security-configuration> section:
<enforce-valid-basic-auth-credentials>false</enforce-valid-basic-auth-credentials>
After this tag was added and the server restarted, WebLogic did not prompt to login to the WebLogic realm.

Encountered errors in Weblogic Bridge

Hello All,
I am trying to create a bridge between OTM AQ and Weblogic JMS Queue. For that i have done folloing steps:
OTM Queue Details:
URL : jdbc:oracle:thin:@dtmdvtm1.lk.nl:1539:dtmdvtm1
Username : glogowner
Pass : xxxx
Queue Name : NB_AQ_INBOUND_QUEUE
1. I have created a Weblogic Queue with folloing Details :
Queue Name : ODITestQueue
Queue JNDI : weblogic.jms.poc.TestQueue
Connection Factory for Above queue:
Connection Factory Name : TestWLSConnectionFactory
Connection Factory Name : wls.test.XAconnectionFactory
Targeted to : Admin Server
2. After that i created DataSource for OTM AQ with following Details:
DS Name : OTMAQDS
JNDI : jdbc/OTMAQDS
Driver Class Name : oracle.jdbc.xa.client.OracleXADataSource
URL : jdbc:oracle:thin:@dtmdvtm1.lk.nl:1539:dtmdvtm1
properties: glogowner
pass : xxxx
3. After that created the foreign server for the OTM AQ
Foreign Server Name : AQJMSForeignServer
JNDI Initial Context Factory: oracle.jms.AQjmsInitialContextFactory
JNDI Properties: datasource=jdbc/OTMAQDS
Connection Factory for Foreign Server
Name : OTMAQConnectionFactory
Local JNDI Name : aqjms.odi.OTMAQQueue
Remote JNDI Name : XAQueueConnectionFactory
Destination for Foreign Server:
Name : NB_AQ_ORDER_INBOUND
Local JNDI Name : NBAQORDERINBOUNDLocal
Remote JNDI Name : Queues/NB_AQ_ORDER_INBOUND
4. After this created the JMS Bridge Destinations
A. InboundODIQueue
1. Connection Factory JNDI Name: wls.test.XAconnectionFactory
     2. Destination JNDI Name: weblogic.jms.poc.TestQueue
     3. Initial Context Factory: weblogic.jndi.WLInitialContextFactory
B. OutboundQueue
1. Connection Factory JNDI Name: aqjms.odi.OTMAQQueue
     2. Destination JNDI Name: NBAQORDERINBOUNDLocal
     3. Initial Context Factory: weblogic.jndi.WLInitialContextFactory
5. After that created a bridge "JOINBRIDGE" , source as "InboundODIQueue" and target as "OutboundQueue"
But in the monitoring tab of Bridge when we restart the server one error displays for some time "WARN: Failed to connect and will reconnect later" also in the logs i am observing below error's:
####<Apr 15, 2013 4:26:00 PM CEST> <Info> <MessagingBridge> <ahl060.ah.nl> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <2f939325acf7729b:76241a93:13e0e15d685:-8000-0000000000000010> <1366035960235> <BEA-200032> <Bridge "OTMAQBridge" is configured to disallow degradation of its quality of service in cases where the configured quality of service is unreachable.>
####<Apr 15, 2013 4:26:00 PM CEST> <Error> <MessagingBridge> <ahl060.ah.nl> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <2f939325acf7729b:76241a93:13e0e15d685:-8000-0000000000000010> <1366035960238> <BEA-200025> <Bridge "OTMAQBridge" failed to start, because the quality of service configured (Exactly-once) is unreachable. This is likely due to an invalid configuration or adapter limitations.>
####<Apr 15, 2013 4:26:00 PM CEST> <Info> <MessagingBridge> <ahl060.ah.nl> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <2f939325acf7729b:76241a93:13e0e15d685:-8000-0000000000000010> <1366035960316> <BEA-200034> <Bridge "OTMAQBridge" is shut down.>
But in my JNDI Tree of admin server evrythings seems ok i mean no error mark with my queue or OTM foreign server.
Could you guys please help me out in this issue i want to forward the messages from my normal queue to OTM AQ.
Also Note that i can directly post message to OTM AQ that why i am creating a bridge to first post the message in normal queue and from there via bridge transfer to OTM AQ.
Thanks in Advance
Regards...

Hi Dongbo,
Thanks for the help ..
But now i am getting following errors:
####<Apr 16, 2013 10:02:19 AM CEST> <Info> <Common> <ahl060.ah.nl> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <2f939325acf7729b:-43339555:13e11d57511:-8000-0000000000000262> <1366099339125> <BEA-000628> <Created "1" resources for pool "eis/jms/WLSConnectionFactoryJNDIXA", out of which "1" are available and "0" are unavailable.>
####<Apr 16, 2013 10:02:19 AM CEST> <Info> <MessagingBridge> <ahl060.ah.nl> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <2f939325acf7729b:-43339555:13e11d57511:-8000-0000000000000262> <1366099339126> <BEA-200032> <Bridge "OTMAQBridge" is configured to disallow degradation of its quality of service in cases where the configured quality of service is unreachable.>
####<Apr 16, 2013 10:02:19 AM CEST> <Info> <MessagingBridge> <ahl060.ah.nl> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <2f939325acf7729b:-43339555:13e11d57511:-8000-0000000000000262> <1366099339126> <BEA-200030> <Bridge "OTMAQBridge" is configured to work in "Exactly-once" mode, and it is actually working in "Exactly-once" mode.>
####<Apr 16, 2013 10:02:19 AM CEST> <Info> <MessagingBridge> <ahl060.ah.nl> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <2f939325acf7729b:-43339555:13e11d57511:-8000-0000000000000262> <1366099339126> <BEA-200028> <The bridge "OTMAQBridge" has started transferring messages.>
####<Apr 16, 2013 10:02:19 AM CEST> <Warning> <MessagingBridge> <ahl060.ah.nl> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <2f939325acf7729b:-43339555:13e11d57511:-8000-0000000000000264> <1366099339131> <BEA-200026> <Bridge "OTMAQBridge" encountered some problems in one of its adapters or underlying systems. It stopped transferring messages and will try to reconnect to the adapters shortly. (The exception caught was javax.resource.ResourceException: Error sending message.)>
####<Apr 16, 2013 10:02:19 AM CEST> <Info> <MessagingBridge> <ahl060.ah.nl> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <2f939325acf7729b:-43339555:13e11d57511:-8000-0000000000000264> <1366099339131> <BEA-200024> <Bridge "OTMAQBridge" refused to obtain connections and transfer any messages, because it has been stopped or suspended, or is shutting down.>
####<Apr 16, 2013 10:02:19 AM CEST> <Info> <MessagingBridge> <ahl060.ah.nl> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <2f939325acf7729b:-43339555:13e11d57511:-8000-0000000000000266> <1366099339131> <BEA-200024> <Bridge "OTMAQBridge" refused to obtain connections and transfer any messages, because it has been stopped or suspended, or is shutting down.>
####<Apr 16, 2013 10:02:19 AM CEST> <Info> <MessagingBridge> <ahl060.ah.nl> <AdminServer> <[ACTIVE] ExecuteThread: '6' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <2f939325acf7729b:-43339555:13e11d57511:-8000-0000000000000267> <1366099339132> <BEA-200024> <Bridge "OTMAQBridge" refused to obtain connections and transfer any messages, because it has been stopped or suspended, or is shutting down.>
####<Apr 16, 2013 10:02:19 AM CEST> <Info> <MessagingBridge> <ahl060.ah.nl> <AdminServer> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <2f939325acf7729b:-43339555:13e11d57511:-8000-0000000000000265> <1366099339136> <BEA-200020> <Bridge "OTMAQBridge" is stopped.>
Can you please help me in this regards.
Regards,

Cache doesn't work with Apace-WebLogic bridge

Hi.We noticed a problem with the download performance of our Java applet with Netscape. It's a tiny applet of 300K that takes only 2 seconds to load using IE, because it is already cached, and with Netscape it is always reloaded and the cache doesn't work.The applet is located on a WebLogic server, and we access it through an Apache server that redirects all requests to the WebLogic server. We noticed that when we access the WebLogic server directly, Netscape cache works fine. However when using the bridge, Netscape ignores the cache, while in IE the cache still works.The Apache server is installed on RedHat Linux 7.1. The bridge is a WebLogic module developed by BEA (the makers of WebLogic) that extends the Apache functionality and enables it to act as a proxy and leave the client (browser) totally unaware of the redirection. The requests are sent to the Apache server and the responses appear to be coming back from it as well.We need to understand why the cache doesn't work when using the bridge. Can you please tell us if you know of this problem or not, and if not -- point us in some direction to check for the problem.Thanks.

You have to modify the password manually in OEM's target.xml.

Weblogic bridge error

Hello!
Please, can some one help me with my problem?
I want to connect from our WebLogic server to OpenMQ JMS Server via bridge. But when i start server, i see this in my console:
<Warning> <Connector> <BEA-190032> << eis/jms/WLSConnectionFactoryJNDINoTX > ResourceAllocationException thrown by resource adapter on call to ManagedConnectionFactory.createManagedConnection(): "javax.resource.ResourceException: Failed to start the connection ">
And i find this in server logs:
Bridge "Bridge-0" failed to connect to the target destination and will try again in 60 seconds. This could be a temporary condition unless the messages repeat several times. (java.lang.Exception: javax.resource.ResourceException: Failed to start the connection at weblogic.jms.adapter.JMSBaseConnection.throwResourceException(JMSBaseConnection.java:1695) at weblogic.jms.adapter.JMSBaseConnection.throwResourceException(JMSBaseConnection.java:1675) at weblogic.jms.adapter.JMSBaseConnection.startInternal(JMSBaseConnection.java:523) at weblogic.jms.adapter.JMSBaseConnection.start(JMSBaseConnection.java:249) at weblogic.jms.adapter.JMSManagedConnectionFactory.createManagedConnection(JMSManagedConnectionFactory.java:190) at weblogic.connector.security.layer.AdapterLayer.createManagedConnection(AdapterLayer.java:803) at weblogic.connector.outbound.ConnectionFactory.createResource(ConnectionFactory.java:91) at weblogic.common.resourcepool.ResourcePoolImpl.makeResources(ResourcePoolImpl.java:1249) at weblogic.common.resourcepool.ResourcePoolImpl.reserveResourceInternal(ResourcePoolImpl.java:418) at weblogic.common.resourcepool.ResourcePoolImpl.reserveResource(ResourcePoolImpl.java:342) at weblogic.common.resourcepool.ResourcePoolImpl.reserveResource(ResourcePoolImpl.java:322) at weblogic.connector.outbound.ConnectionPool.reserveResource(ConnectionPool.java:620) at weblogic.common.resourcepool.ResourcePoolImpl.reserveResource(ResourcePoolImpl.java:316) at weblogic.connector.outbound.ConnectionManagerImpl.getConnectionInfo(ConnectionManagerImpl.java:380) at weblogic.connector.outbound.ConnectionManagerImpl.getConnection(ConnectionManagerImpl.java:320) at weblogic.connector.outbound.ConnectionManagerImpl.allocateConnection(ConnectionManagerImpl.java:129) at weblogic.jms.adapter.JMSBaseConnectionFactory.getTargetConnection(JMSBaseConnectionFactory.java:123) at weblogic.jms.bridge.internal.MessagingBridge.getConnections(MessagingBridge.java:864) at weblogic.jms.bridge.internal.MessagingBridge.run(MessagingBridge.java:1055) at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528) at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209) at weblogic.work.ExecuteThread.run(ExecuteThread.java:178) -------------- Linked Exception ------------ java.lang.NullPointerException at com.sun.enterprise.naming.SerialContext.lookup(SerialContext.java:385) at javax.naming.InitialContext.lookup(InitialContext.java:392) at weblogic.jms.adapter.JMSBaseConnection$2.run(JMSBaseConnection.java:284) at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363) at weblogic.jms.adapter.JMSBaseConnection.startInternal(JMSBaseConnection.java:282) at weblogic.jms.adapter.JMSBaseConnection.start(JMSBaseConnection.java:249) at weblogic.jms.adapter.JMSManagedConnectionFactory.createManagedConnection(JMSManagedConnectionFactory.java:190) at weblogic.connector.security.layer.AdapterLayer.createManagedConnection(AdapterLayer.java:803) at weblogic.connector.outbound.ConnectionFactory.createResource(ConnectionFactory.java:91) at weblogic.common.resourcepool.ResourcePoolImpl.makeResources(ResourcePoolImpl.java:1249) at weblogic.common.resourcepool.ResourcePoolImpl.reserveResourceInternal(ResourcePoolImpl.java:418) at weblogic.common.resourcepool.ResourcePoolImpl.reserveResource(ResourcePoolImpl.java:342) at weblogic.common.resourcepool.ResourcePoolImpl.reserveResource(ResourcePoolImpl.java:322) at weblogic.connector.outbound.ConnectionPool.reserveResource(ConnectionPool.java:620) at weblogic.common.resourcepool.ResourcePoolImpl.reserveResource(ResourcePoolImpl.java:316) at weblogic.connector.outbound.ConnectionManagerImpl.getConnectionInfo(ConnectionManagerImpl.java:380) at weblogic.connector.outbound.ConnectionManagerImpl.getConnection(ConnectionManagerImpl.java:320) at weblogic.connector.outbound.ConnectionManagerImpl.allocateConnection(ConnectionManagerImpl.java:129) at weblogic.jms.adapter.JMSBaseConnectionFactory.getTargetConnection(JMSBaseConnectionFactory.java:123) at weblogic.jms.bridge.internal.MessagingBridge.getConnections(MessagingBridge.java:864) at weblogic.jms.bridge.internal.MessagingBridge.run(MessagingBridge.java:1055) at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528) at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209) at weblogic.work.ExecuteThread.run(ExecuteThread.java:178) )
And connect failed.
Help please!
Edited by: 988900 on 19.02.2013 2:35

Hi,
This happens when the max number of connections in the jms_xa_adp\weblogic-ra.xml gets exhausted. During heavy load the message starts flow.
In general, the value of the max-capacity attribute should be at least two times the number of bridge instances. For example, if your environment has up to ten message bridge instances targeted, a max-capacity attribute setting of 20 in the default configuration is adequate. But if you increase the number of bridge instances to 15, increase the max-capacity attribute to 30.
Use the following steps to modify the weblogic-ra.xml descriptor file:
1.Using the editor of your choice, update the attribute with the desired value.
2.Deploy the updated adapter.
3.Stop and restart any bridge instance that requires the new values.
Example weblogic-ra.xml Descriptor File:
<weblogic-connection-factory-dd>
<connection-factory-name>WLSJMSConnectionFactoryLocal</connection-factory-name>
<jndi-name>eis/jms/WLSConnectionFactoryJNDILocal</jndi-name>
<pool-params>
<initial-capacity>0</initial-capacity>
<max-capacity>20</max-capacity>
</pool-params>
</weblogic-connection-factory-dd>
Mark if this helps.
Regards,
Kishore

Weblogic Bridge to ActiveMQ

I am currently trying to connect to an activeMQ using a Bridge.
I have the activemq-all-5.6.0.jar in my class path on the start-up of weblogic.
CLASSPATH=/weblogic/Oracle/Middleware/patch_wls1035/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/weblogic/JDK/jdk1.6.0_29/lib/tools.jar:/weblogic/Oracle/Middleware/wlserver_10.3/server/lib/weblogic_sp.jar:/weblogic/Oracle/Middleware/wlserver_10.3/server/lib/weblogic.jar:/weblogic/Oracle/Middleware/modules/features/weblogic.server.modules_10.3.5.0.jar:/weblogic/Oracle/Middleware/wlserver_10.3/server/lib/webservices.jar:/weblogic/Oracle/Middleware/modules/org.apache.ant_1.7.1/lib/ant-all.jar:/weblogic/Oracle/Middleware/modules/net.sf.antcontrib_1.1.0.0_1-0b2/lib/ant-contrib.jar:/opt/ActiveMQ/activemq-all-5.6.0.jar:/weblogic/Oracle/Middleware/wlserver_10.3/common/derby/lib/derbyclient.jar:/weblogic/Oracle/Middleware/wlserver_10.3/server/lib/xqrl.jar
This is the definition of my Bridge from the server log
####<Dec 14, 2012 10:50:29 AM GMT> <Debug> <MessagingBridgeStartup> <vsl000i031.vspref.adidom.com> <AdminServer> <[ACTIVE] ExecuteThread: '5' for queue: 'weblogic.kerne
l.Default (self-tuning)'> <weblogic> <> <> <1355482229704> <BEA-000000> <Bridge IIPToGSDEM's source configurations are:
AdapterJNDIName=eis.jms.WLSConnectionFactoryJNDIXA
Classpath=null
ConnectionURL = tcp://localhost:61616
DestinationType = Queue
DestinationJNDIName = CITOUTBOUND
InitialContextFactory = org.apache.activemq.jndi.ActiveMQInitialContextFactory
ConnectionFactoryJNDIName = QueueConnectionFactory
>
####<Dec 14, 2012 10:50:29 AM GMT> <Debug> <MessagingBridgeStartup> <vsl000i031.vspref.adidom.com> <AdminServer> <[ACTIVE] ExecuteThread: '5' for queue: 'weblogic.kerne
l.Default (self-tuning)'> <weblogic> <> <> <1355482229704> <BEA-000000> <Bridge IIPToGSDEM's target configurations are:
AdapterJNDIName=eis.jms.WLSConnectionFactoryJNDIXA
Classpath=
ConnectionURL = t3://localhost:7001
DestinationType = Queue
DestinationJNDIName = INCIDENT_IN_Q_AT_GSD
InitialContextFactory = weblogic.jndi.WLInitialContextFactory
ConnectionFactoryJNDIName = BridgeCF
>
But my connection fails to find the activeMQ name CITOUTBOUND
####<Dec 14, 2012 10:50:29 AM GMT> <Debug> <MessagingBridgeRuntimeVerbose> <vsl000i031.vspref.adidom.com> <AdminServer> <[STANDBY] ExecuteThread: '3' for queue: 'weblog
ic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1355482229710> <BEA-000000> <Exception:
javax.naming.NameNotFoundException: CITOUTBOUND
at org.apache.activemq.jndi.ReadOnlyContext.lookup(ReadOnlyContext.java:235)
at javax.naming.InitialContext.lookup(InitialContext.java:392)
at weblogic.jms.adapter.JMSBaseConnection$3.run(JMSBaseConnection.java:299)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.jms.adapter.JMSBaseConnection.startInternal(JMSBaseConnection.java:297)
at weblogic.jms.adapter.JMSBaseConnection.start(JMSBaseConnection.java:249)
I think this has something to do with the activemq jndi properties
java.naming.factory.initial = org.apache.activemq.jndi.ActiveMQInitialContextFactory
# use the following property to configure the default connector
java.naming.provider.url = tcp://localhost:61616
# use the following property to specify the JNDI name the connection factory
# should appear as.
connectionFactoryNames = connectionFactory, QueueConnectionFactory, topicConnectionFactry
# register some queues in JNDI using the form
# queue.[jndiName] = [physicalName]
queue.CITOUTBOUND = CIT.OUTBOUND
queue.EMINBOUND = EM.INBOUND
queue.EMOUTBOUND = EM.OUTBOUND
This file has been places in
[root@vsl000i031 /]# find . -name jndi.properties -print
./weblogic/Oracle/Middleware/user_projects/domains/base_domain/jndi.properties
./weblogic/Oracle/Middleware/wlserver_10.3/server/jndi.properties
If I write java code to establish the connection is successfully connects using the above jndi properties.
I have tried placing the above file into a jar and including it on the weblogic class path, but when I do that the server fails to start.
Hopefully someone can help me with my problem.
Thanks.

I am currently trying to connect to an activeMQ using a Bridge.
I have the activemq-all-5.6.0.jar in my class path on the start-up of weblogic.
CLASSPATH=/weblogic/Oracle/Middleware/patch_wls1035/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/weblogic/JDK/jdk1.6.0_29/lib/tools.jar:/weblogic/Oracle/Middleware/wlserver_10.3/server/lib/weblogic_sp.jar:/weblogic/Oracle/Middleware/wlserver_10.3/server/lib/weblogic.jar:/weblogic/Oracle/Middleware/modules/features/weblogic.server.modules_10.3.5.0.jar:/weblogic/Oracle/Middleware/wlserver_10.3/server/lib/webservices.jar:/weblogic/Oracle/Middleware/modules/org.apache.ant_1.7.1/lib/ant-all.jar:/weblogic/Oracle/Middleware/modules/net.sf.antcontrib_1.1.0.0_1-0b2/lib/ant-contrib.jar:/opt/ActiveMQ/activemq-all-5.6.0.jar:/weblogic/Oracle/Middleware/wlserver_10.3/common/derby/lib/derbyclient.jar:/weblogic/Oracle/Middleware/wlserver_10.3/server/lib/xqrl.jar
This is the definition of my Bridge from the server log
####<Dec 14, 2012 10:50:29 AM GMT> <Debug> <MessagingBridgeStartup> <vsl000i031.vspref.adidom.com> <AdminServer> <[ACTIVE] ExecuteThread: '5' for queue: 'weblogic.kerne
l.Default (self-tuning)'> <weblogic> <> <> <1355482229704> <BEA-000000> <Bridge IIPToGSDEM's source configurations are:
AdapterJNDIName=eis.jms.WLSConnectionFactoryJNDIXA
Classpath=null
ConnectionURL = tcp://localhost:61616
DestinationType = Queue
DestinationJNDIName = CITOUTBOUND
InitialContextFactory = org.apache.activemq.jndi.ActiveMQInitialContextFactory
ConnectionFactoryJNDIName = QueueConnectionFactory
>
####<Dec 14, 2012 10:50:29 AM GMT> <Debug> <MessagingBridgeStartup> <vsl000i031.vspref.adidom.com> <AdminServer> <[ACTIVE] ExecuteThread: '5' for queue: 'weblogic.kerne
l.Default (self-tuning)'> <weblogic> <> <> <1355482229704> <BEA-000000> <Bridge IIPToGSDEM's target configurations are:
AdapterJNDIName=eis.jms.WLSConnectionFactoryJNDIXA
Classpath=
ConnectionURL = t3://localhost:7001
DestinationType = Queue
DestinationJNDIName = INCIDENT_IN_Q_AT_GSD
InitialContextFactory = weblogic.jndi.WLInitialContextFactory
ConnectionFactoryJNDIName = BridgeCF
>
But my connection fails to find the activeMQ name CITOUTBOUND
####<Dec 14, 2012 10:50:29 AM GMT> <Debug> <MessagingBridgeRuntimeVerbose> <vsl000i031.vspref.adidom.com> <AdminServer> <[STANDBY] ExecuteThread: '3' for queue: 'weblog
ic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1355482229710> <BEA-000000> <Exception:
javax.naming.NameNotFoundException: CITOUTBOUND
at org.apache.activemq.jndi.ReadOnlyContext.lookup(ReadOnlyContext.java:235)
at javax.naming.InitialContext.lookup(InitialContext.java:392)
at weblogic.jms.adapter.JMSBaseConnection$3.run(JMSBaseConnection.java:299)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.jms.adapter.JMSBaseConnection.startInternal(JMSBaseConnection.java:297)
at weblogic.jms.adapter.JMSBaseConnection.start(JMSBaseConnection.java:249)
I think this has something to do with the activemq jndi properties
java.naming.factory.initial = org.apache.activemq.jndi.ActiveMQInitialContextFactory
# use the following property to configure the default connector
java.naming.provider.url = tcp://localhost:61616
# use the following property to specify the JNDI name the connection factory
# should appear as.
connectionFactoryNames = connectionFactory, QueueConnectionFactory, topicConnectionFactry
# register some queues in JNDI using the form
# queue.[jndiName] = [physicalName]
queue.CITOUTBOUND = CIT.OUTBOUND
queue.EMINBOUND = EM.INBOUND
queue.EMOUTBOUND = EM.OUTBOUND
This file has been places in
[root@vsl000i031 /]# find . -name jndi.properties -print
./weblogic/Oracle/Middleware/user_projects/domains/base_domain/jndi.properties
./weblogic/Oracle/Middleware/wlserver_10.3/server/jndi.properties
If I write java code to establish the connection is successfully connects using the above jndi properties.
I have tried placing the above file into a jar and including it on the weblogic class path, but when I do that the server fails to start.
Hopefully someone can help me with my problem.
Thanks.

IIS to Weblogic Bridge

Similar Messages

Maybe you are looking for