IIS7 and CF9 Installation
Can anyone point me in the right direction for set-up information regarding IIS7 and CF9? I can't seem to get CF9 working. I am running IIS7 on a Windows 2008 Standard x64 server and a fresh install of CF9. The install documentation seems sparse and unspecific. Any guidance is greatly appreciated.
See the CF9 documentation.
http://help.adobe.com/en_US/ColdFusion/9.0/Admin/WSc3ff6d0ea77859461172e0811cbf363a5d-7fef .html
http://help.adobe.com/en_US/ColdFusion/9.0/Admin/WSc3ff6d0ea77859461172e0811cbf364104-7fc3 .html
Message was edited by: JR "Bob" Dobbs, added second URL.
Similar Messages
-
Having an issue with CF9 installation
Hello,
I'm trying to install CF9 on my computer but I'm having a problem once the installation has completed and it gets to the Administrator and Migration part (the part where it opens a browser). I enter in the admin password and click ok and then it goes on to the page that says the server is being configured. There's a note that says this may take a few minutes but after waiting 10-15, I get a timeout error that says the request is exceeding the allowable time limit. I'm not sure what to do at this point. I've tried re-installing and changing installation options but nothing works.
On a separate note, after the installation completes I get a Jrun4 process in the Windows Task Manager and it completely hogs my computers memory. After a few minutes it will be using around 500mb of memory and the computer is unusable because of how long it takes to respond to every click.
Please help!
Here are my computer's stats:
(All system requirements filled)
Windows Vista Home Premium
AMD Athlon(tm) 64 X2 Dual-Core Processor TK-57 1.9 GHz
959 MB RAM
32 - bit operation system
My default browser is Google Chrome and that's what it uses when it goes through this problem. I've tried manually running the Administrator link with IE and firefox and I get the same problems.
My computer is a HP Compaq Presario F700 Notebook PC and its about 2 years old although running well, maybe its just not up to running CF9?
Thanks for any help,
AlexOk, I edited the config file so that line now reads:
java.args=-server -Xmx240m ......
and that worked so now Jrun is manageable for my computer. Thanks!
Once I got the CF server started, I ran the Administrator page and once I entered my password it just stayed on that page until it timed out. It never went to the next page where it says please wait while the server is configured. Here is the time out error:
and the command window shows:
Did I limit the heap size too much?
I also noticed one other thing that I thought might be important when I first ran cfstart.bat. It says "warning Unable to open ......". I have no idea if this means anything but just in case, I'm posting a screenshot of it. Its the 3rd line in the command window:
Any more ideas? -
I have installed the agent 10 or 15 times and one installation has failed, no error appeared during the installation but I am having inconsistent issues with my ethernet card not working here and there. We rebooted and can log into Novell client but the login prompt did not appear for ESM client or the icon was not in the systray. Everything seems to work, besides at times (a couple times today) it terminates his ethernet card/connection. I would re-image his computer but he has several applications and it would take several hours, so I am hoping someone has an idea to fix this issue. So I was trying to figure out why he did not get the prompt to login and why it's not in the systray and it appears to not have completed the install? I checked the add/remove programs, its not listed within their, I also checked the registry and found nothing for endpoint within their, but the files are within c:\program files\novell\zenworks endpoint security.
I have also tried uninstalling it but that fails due to it "not being installed", and it will not reinstall over itself either.
I did notice that stuninstdrv.exe is running in task manager. Any help would be great...
Windows xp sp3
ESM 3.5.154
Thanks,
AndyIf you are searching the registry, check for the "Senforce" string. It should be at HKLM\Software\Senforce
Try running the install program for the ZSC with the following command line:
setup.exe /V"STUNINSTALL=1"
If you've specified an uninstall password, try this one instead:
setup.exe /V"STUNINSTALL=1 STUIP=password"" (please note the double quote at the end)
Let me know if that helped you.
Daniel
>>>
From: Andy_DeWees<[email protected] du>
To:novell.support.zenworks.endpoint-security-management
Date: 2/5/2009 12:52 PM
Subject: I have installed the agent 10 or 15 times and one installation hasfailed, no error appeared during the installation but I am havinginconsistent issues with my ethernet card not working here and there. Werebooted and can log into Novell client but the login prompt did not appearfor ESM client or the icon was not in the systray. Everything seems towork, besides at times (a couple times today) it terminates his ethernetcard/connection. I would re-image his computer but he has severalapplications and
I have installed the agent 10 or 15 times and one installation has failed, no error appeared during the installation but I am having inconsistent issues with my ethernet card not working here and there. We rebooted and can log into Novell client but the login prompt did not appear for ESM client or the icon was not in the systray. Everything seems to work, besides at times (a couple times today) it terminates his ethernet card/connection. I would re-image his computer but he has several applications and it would take several hours, so I am hoping someone has an idea to fix this issue. So I was trying to figure out why he did not get the prompt to login and why it's not in the systray and it appears to not have completed the install? I checked the add/remove programs, its not listed within their, I also checked the registry and found nothing for endpoint within their, but the files are within c:\program files\novell\zenworks endpoint security.
I have also tried uninstalling it but that fails due to it "not being installed", and it will not reinstall over itself either.
I did notice that stuninstdrv.exe is running in task manager. Any help would be great...
Windows xp sp3
ESM 3.5.154
Thanks,
Andy -
Serenityvalley wrote:
You need to go to This Page and download just about everything on it -espeically the System Update Deployment Guide and start reading. It'll take you a few hours to learn what you need to do and implement it if you are familar with editing system registeries and you have some luck and everything goes well.
You do NOT need to edit registry, just use Thin Installer instead of System Update on the clients. And there is no need to wade thru the deployment guide if you are setting this up in a home environment for just one or two clients.
Edit: Note that Thin Installer does not run on Vista SP2 (neither does System Update.)
Here are the few simple things you have to do:
1. Download Update Retriever (UR) and Thin Installer (TI) from here.
2. Install UR on one pc and TI on all clients you want to keep updated. UR installs into the Start -- All Programs -- Thinkvantage folder, TI installs into c:\program files\thininstaller.
3. To initialize Update Retriever:
a) specify the download folder, pick a place all clients can access. Create a new folder, TI will be confused if there is other stuff in it.
b) change the settings to Severity -- Optional (assuming you want to see critical, recommended and optional downloads in the list), License -- Do not display and Status -- Active. After clicking next you enter the machine type, the op system and its language for each client you need to keep updated. Note that unless you change status to active everything will download as "test" and thus not be installed by the Thin Installer.
4. Run the download, about 1 - 1.5GB for the first type, opsys and language combination and an additional 0.5 - 1GB for each additional type depending on amount of overlap. You can be selective what you download but if you are an average home user -- just download all the items for your type/opsys/language combination(s) -- Thin Installer is a stripped down version of System Update and will decide what to install on the individual client. This is a one-time download, next time you run Update Retriever it will just download new drivers.
5. To initialize TI on each client, copy the program from the Program Files directory and paste a shortcut to the desktop. Then rightclick on the shortcut and choose Properties, and in the target field of the shortcut tab after "C:\Program Files\ThinInstaller\ThinInstaller.exe" add the following: -repository your_UR_download_directory.
6. Run the Thin installer on each client, it will perform exactly as System Update did, down to making the same mistakes that System Update did.
7. As the date is getting close when Windows Update will start distributing Vista SP2 you may want to consider using Microsoft's SPBlockerTools preventing SP2 installation for up to 12 months.
8. Debugging Tips
TI ending with message An error occurred while gathering user information is reported when running under Vista SP2 -- TI will not run in SP2.
Getting TI to "see" the database downloaded by UR is the main problem. If TI ends with a message saying corrupt or not found database you probably made a spelling mistake in the directory specified in the -repository parameter. If TI ends with a message saying no applicable packages to install it can mean a number of things:
a) If you are unused to modifying the parameters in a shortcut you may have added -repository to the second field in the shortcut tab instead of the top field labeled Target, the two fields look very similar or you just made a typo in "-repository".
b) Open UR again and first choose Modify settings on the left and double check that the directory there is the same directory you specified in -repository. Then choose Manage repository -- Update view and double check that all packages have status Active. If they don't it's not necessary to download again, just select all and hit the modify button to change status from Test to Active.
c) In C:\Program Files\ThinInstaller\logs there are update logs from TI. Open one using Notepad and in edit menu search for the string
Message: 'Share name' to use:
This will tell you in which directory TI is searching for the updates. If it can't find a -repository parameter it uses an empty default databse
d) If you used System Update regularly up to when it stopped working on April 1 and if you have an older model with not so many new driver updates it may actually happen that there are no new updates for your machine (even though you downloaded a lot.) Go to here and enter all fields except model to see what Lenovo shipped after April 1. (Don't click on driver matrices, staying on the downloads and drivers pages will give you a list in chronological order with the ones after April 1 at the top.) Also be aware that the database UR downloads from is at least 2 weeks behind when the drivers first become available on the web. Right now, the only new download in the database applicable to most notebooks after April 1 is the Access Connections 5.22 driver. To check what release you have installed open Access Connections and go to help.
I just did a clean install of a Vista64 system on my T500 and after installing the first few drivers manually (including drivers for harddisk and ethernet) let Thin Installer install the remaining 36 items for me. The only item left to fix was the known bug in the Ricoh 4 in 1 card driver SU installation. (For a clean install you need to run TI or SU more than once, it doesn't find all drivers the first time.)
Message Edited by JaneL on 05-08-2009 10:30 PM
Message Edited by zilla on 2009-05-28 12:48 PM
T500: Vista 32, 2.8GHz, 4GB RAM, 15.4" 1680x1050, 500GB 7200rpm, ATI Radeon HD3650 + Intel 4500MHD. T42: XP, 1.7GHz, 2GB RAM, 14.1" 1024x768, 250GB PATA, ATI Radeon 7500.koolzero wrote:
When I start TI after I pointed it to my repository I get a message that no packages applicable were found. I did not download all the updates just a few to test it, will it not work unless all updates are downloaded?
Did you change status from test to active in UR before downloading? If not you can change the downloaded items in the manage repository menu.
Assuming the items you did download were not already installed on your client with TI it should work.
Message Edited by zilla on 2009-05-06 10:23 PM
T500: Vista 32, 2.8GHz, 4GB RAM, 15.4" 1680x1050, 500GB 7200rpm, ATI Radeon HD3650 + Intel 4500MHD. T42: XP, 1.7GHz, 2GB RAM, 14.1" 1024x768, 250GB PATA, ATI Radeon 7500. -
can someone please help .. my ipod is not recognized by itunes in windows XP .. i've uninstalled and re-installe i tunes about 10 times now to no avail ?? thank you .. dave
Start here:
iOS: Device not recognized in iTunes for Windows -
I still get the message to download the app, but I did, and the installation was allegedly successful. This even happens after a reboot
I guess that was a bit cryptic. I'm trying to update iPhoto from system 10.5.6, a PowerPC system, to 10.8. The app I downloaded is iPhotoLibraryUpgrader.dmg. I open that and I see Iphoto Library Upgrader.pkg. Igo through the install, which says it completes successfully. However, when I double-click on the iPhoto icon on the dock, I get the oroginal message that the upgrade must be installed. I hope this gives enough information to diagnose the problem. I apologize for the first message's laack of detail.
-
Every time I try to install Adobe Digital Reader 3.0 I get an error message "migration has stopped working" and the installation fails. Is there a solution to this?
Trying to install. Installation fails and I am unable to open it to migrate
epub books to transfer to ereader
In a message dated 8/31/2014 9:50:51 A.M. Eastern Daylight Time,
[email protected] writes:
Unable to install Adobe Digital Reader 3.0. Keep receiving error message
"migration has stopped working" and then installation fails.
created by kglad (https://forums.adobe.com/people/kglad) in
Downloading, Installing, Setting Up - View the full discussion
(https://forums.adobe.com/message/6688648#6688648) -
Something happened and your installation of Windows 8.1 couldn't be completed
I have a brand new Acer with Win 8 installed. I've removed McAfee. Other than that the machine is as delivered.
Trying to download 8.1 and install it from the store. It sits there for a couple of minutes then says:
Your Windows 8.1 installation couldn't be completed
Something happened and the installation of Windows 8.1 can't be completed.
Now apart from this being really annoying could anyone have come up with a less useful message?
I have tried it several times. I've run the compatibility util and it passes. I've tried the store without logging in, then tried the store with logging in.
I've tried it in Firefox, tried it in IE.
Same result every time.OK, so I posted 2 days ago about this issue, and I resolved it yesterday. I essentially performed a "refresh" under Windows 8, which removed a lot of the updates and applications that could be potential issues.
I then had to go to the Sony website to re-install the latest drivers, SW and driver patches related to my Vaio Duo (I had already updated the firmware and Bios -- necessary to install Windows 8.1--). I then had to re-install all Windows 8 updates,
and magically, the Windows 8.1 update started to download when I clicked on it in the Windows Marketplace. I do not know what was the source of the problem, but the refresh definitely got rid of it. It is a long process however as a lot has to
be reinstalled to bring the refreshed system to its full functionality with the latest manufacturer and Microsoft updates for Windows 8.
I can't see how a non-technical user could perform all these steps to upgrade a recent tablet to Windows 8.1!
Good luck!
Olivier -
I need help with deactivation.
I want to do a clean install of Windows 7 Pro on my computer and my installation of Adobe Design Premium CS3 is not functioning. I cannot start it to get in and deactivate the Creative Suite installation.if you're using the same computer hardware to reinstall your cs3, you don't need to deactivate first.
but if there's a significant hardware change you can ask adobe support for an activation count reset. contact adobe support by clicking here and, when available, click 'still need help', https://helpx.adobe.com/contact.html -
Lr and Ps installation problems.
i just uninstalled my photoshop cc and lightroom 5 app after i purchased the creative cloud for photography and i am trying to reinstall the apps but i am unable too, can someone help me?
I had possibly the same error...
Windows installer looking for the LR 1.3 msi but could not find it (msi is extracted to a temp location on drive). The dialog box appeared asking for it to be manually located. Win Installer refered to an unavailable network resource. Install failed with an error, 1714(?) unable to remove older version.
I ran a search on C drive and located the extracted msi and directed installer to this location but still would not install.
Thought that there may be a problem left by a previous LR install so ran MS Windows Installer Clean Up Utility, selecting "Adobe Photoshop Lightroom" only and click remove. (Warning: this can toast the app's install and require a total reinstall--I was luck).
Ran LR 1.3 installer and upgrade completed fine. Did have to tell LR 1.3 where my image folder on the ext. hard drive was and LR ran a check - catalog vs folder to ensure integrity.
All fine now. -
Some of my applications have been saying I need the latest version of Adoebe Flash Player. When I try to download it I get the following error message: 'Frame Load interrupted' and the installation stops. Any suggestions?
You can only use apps downloaded from the App store, not via a browser. There is no Flash for any iOS device including the iPod.
-
I can't upgrade my iPhone 4 to iOS 5.1.1 from the iPhone using wifi!! the installation start but before finishing an error occurred and the installation stop! help
I will try, and what happen is that after it is intall and start "Preparing upgrade" the installation stop and a message occure: An error occure download the iOS 5.1.1" thas all.
But now it is too late because the iOS 6 is now availabel, is it recommendet to donwload iOS 6 on iPhone 4 or not? -
I get a message "In order to continue installation, please close the following application. I closed the application, but the message does not close and the installation is "frozen" ... how do I reset?
Try posting in the Mountain Lion forum. Here is the link below. This forum is for old software circa 2003.
https://discussions.apple.com/community/mac_os/os_x_mountain_lion -
DATE and TIME installation of MIDlet
Can we know DATE and TIME installation of a MIDlet on a device?
I mean, I want to know when a MIDlet was installed on a device. Can we do
it by coding?
Any explanations would be appreciated.
Thanks.No...
At least, not the easy way. What you could do is put a timestap into the application jar file, that indicates when the midlet was downloaded. You have to make a servlet or script that updates the application jar file with a new timestap every time a user want's to download it. -
Hi, I upgraded my iPad to version 5.0, I had a message on my Setting to upgrade the software to version 5.0.1, I select install and during installation my iPad2 star rebooting and now doing it non stop. I have no time to restore or do anything. My ipad rebooting every 2 or three minutes
See Here
iPad Unable to Update or Restore
http://support.apple.com/kb/ht4097
Maybe you are looking for
-
GRE tunnel could not be used by the hosts connected to the router
Hi, I am using cisco ASR1013 (RP2) and a Mikrotik Router for setting up a GRE tunnel for LAN to LAN routing over a broadband link. The tunnel works fine (able to ping tunnel end points and also all the connected interfaces on both the Mikrotik and Ci
-
Transferring library from old PC to new MAC...problems
Hi, this is my first post as I am new to mac. I am trying to transfer my itunes library from my PC to my new mac, and I followed the instructions posted here to use your ipod to transfer music from one computer to another. At the very last step it sa
-
Possible to block a contact on iPad without blocking on iPhone?
I Want to prevent some contacts from reaching me on my iPad, but I don't want to block them from my iPhone. Is this possible, or will blocking them on my iPad block them across all my devices?
-
well i was trying to kill the process that is preventing my macbook pro sleep firsst u do pmset -g asserations then find PreventSystemSleep 1 PreventUserIdleSystemSleep 1 so i can disable it and kill it but it tel
-
Verification of AppleCare registration?
Hi, I purchased an AppleCare protection plan at the same time as I purchased my MacBook Pro. I believe I auto-enrolled, but when I log in under my AppleID and look for my registered AppleCare agreements, I am told I don't have any products registere