IK Bone Tool - How to change the picture of a bodypart in animation?

I don't know how to word this any better. I have a puppet and all ready for animation. Now the question is how can I change the picture of a body part? Example on how I thought it would work: I have a walking puppet, and I can change the picture of the foot for example, when it steps on the ground. Or I can change the picture of the hand, by adding another keyframe and select that one. I could for example change the weapon the character has in his hand while walking, or the picture of the eyes from open to closed, for just 2 frames of the animation. How do I do that? I can't find a way. Simply adding another keyframe to the hand-movieclip doesn't work, it just plays both of these back all the time then.

But swapping it through the properties windows swaps it for the whole animation. That is good for getting animations with different objects in the characters hands, but its not exactly how I want it. I only want it to be swapped for the frames in which I set it to something else, and then it goes back to normal.
Like the character runs and closes his eyes while running, so I wanna switch the picture of the eyes for those few frames. I don't exactly understand how you mean that.
I'm not sure how you mean that with the adding frames in the timeline, maybe that is exactly what I mean but I dont understand it. Do you mean in the main timeline? I don't get it. If I put another frame in one of the movie clips (for the hand for example) it plays the whole time, so it changes between the two hand versions all the time while he is walking.
And to the video link above, that only seems to explain the basic bone thing, not my question. I already have a skeleton set up.

Similar Messages

How to change the picture frame size in Lightroom 5 Book

I would like to control the actual picture frame size when making a Book in Lightroom 5. Or else know the sizes of the different picture frames provided by choosing the different page layouts. That way I can either change the picture frame dimensions to accomodate each photo or change the image size to fit in the offered picture frame. I find that using the software as is winds up cropping the images in unwanted ways. Modifying the picture frame would be my preferred alternative. Appreciate any ideas

Hi again Tony,
I have been using Adobe Photoshop 7, Photoshop Elements, Perfect Photo Suite, Photo Studio, etc., changing Image size, placing a picture on a page and then, do a simple last minute size adjustment by using the arrows to stretch or shrink it in place. Things would be a lot simpler if I could do the same thing with the cells in Lightroom 5. Cell pad adjustments do not fill the bill.
I think we’ve pretty much concluded this exchange. Thanks again for your effort.
david
ay [email protected]
Sent: Wednesday, March 12, 2014 11:27 PM
To: dgbrow
Subject: How to change the picture frame size in Lightroom 5 Book
Re: How to change the picture frame size in Lightroom 5 Book
created by Tony Jay <http://forums.adobe.com/people/Tony+Jay> in Photoshop Lightroom - View the full discussion <http://forums.adobe.com/message/6205206#6205206

How to change the picture for guest account that was created by "find my mac"? Is it possible to change the photo?

I want to change the picture to my guest account that was created by "find my mac." I tried using the workspace type program but it did not recognize my guest account. I am not sure what to do and need some help. Thanks!

I don't think there is a straight-forward way to do this. However, if the guest account is bothering you, you can disable it from within the System Preferences.

HT5361 maybe this is stupid, but i really don't know how to change the picture on the mail

I have been trying and I cant find where to change that picture anywhere
if one of you guys could help me I would be gratefull

It's the picture set for your user in the Users & Groups system preference for your user account.
Click the image and you can change it if you wish. But it just appears on your own computer. It's not sent with email messages, so it's not something you really need to worry about unless you just don't like seeing that particular picture.
Regards.

How to change the size of the titel of a picture in a diashow

please answer the question.
how to change the size and the possition of the titel of a picture in a diashow

You need to select it. Copy that selection to a new layer, and use Free Transform to resize it.
http://www.youtube.com/watch?v=qWpAGmwhllQ
http://www.youtube.com/watch?v=Bi4jJnYLkUA

How to change the size of a particular object in the picture?

How to change the size of a particular object in the picture?

You need to select it. Copy that selection to a new layer, and use Free Transform to resize it.
http://www.youtube.com/watch?v=qWpAGmwhllQ
http://www.youtube.com/watch?v=Bi4jJnYLkUA

How do I change the picture in the face bar?

How do I change the picture or colors in the top bar on the screen. It is where the file, edit, view, etc commands are written. It is to dark and I would like to customize it to something lighter.

The easiest way might be to install a lightweight theme (formerly known as a persona). You can "shop" for one on the Add-ons site. The following link is for solid colors, but some of the pictorial ones might work, too.
https://addons.mozilla.org/en-US/firefox/themes/solid
You can hover your mouse over the little image tile to see how it would look if you installed it. Can you find one that looks good to you?
Much of Firefox's interface also can be modified with style rules. However, that requires a lot more experimentation, so let's come back to that only if needed.

How do I change the picture that shows up when I airdrop something (profile picture?)

I am wondering how I change the little circle picture that would show up on the device that I airdrop to. It's the one that's has your name under it when someone want to airdrop something to you. I guess it's like my profile picture.

If it's the photo you used in contacts you change it there. Tap edit, then tap edit under your photo.

How to change the font size of Text box tool ?

How to change the font size of Text box tool ?
I am using Acrobat PDF 6.0
Tools > Advanced Commenting > Text Box Tool
I need to know how to change the font size. The default font size is too big.
let me know
Thanks

I do not have AA6 available right now (I can check at home this evening). I am also using AA Pro, not Std. In AA7, there is a text box tool that is a commenting tool. When I started typing, a properties toolbar came up that had the font size and such. I haven't figured out how to get the toolbar after the fact. In AA8, I selected the text box tool and then went to view and selected the properties bar (the font size and all showed then), or use Ctrl-E when editing the text. I have not been able to figure out how to edit the text in a text box after you have created it - think it is a mental block right now. Bill

How do you change the picture when logging in

I want to change the picture / Icon when I log in. How do I do that?

Changing your user account icon
Your user account icon appears in the Login window when you log in (if your Mac isn't set to automatically log you in), and is used as your contact portrait unless you change it. When you first set up your user account, you have the opportunity to select a picture to use as your icon. You can also change the icon whenever you want, as described below.
You can use one of the included icons, drag in a custom image, or take a snapshot with your Mac's camera
From the Apple menu, choose System Preferences.
Click Users & Groups (click Accounts in Mac OS X v10.6).
To the left of the "Change Password" button is a pop-up menu that shows your current account icon. Click it to choose a different icon, or to use your Mac's camera to take a snapshot to use as an icon. You can also simply drag a picture to the menu
If desired, crop and reposition the new icon.
When satisfied, click Done to make the change.
http://support.apple.com/kb/ht2493

HT5622 How do I change the picture that other iphone users see?

How do I change the picture that other iphone users see?

Thanks for your help! Is it chilly for a kilt there?

How to change the format of a picture?

I've saved a picture that I got from Twitter. The end of the picture file says ".jpg-large".
This file will not open in Preview, nor in iPhoto which are the two apps where I knew how to change the format.
Could anybody help me out in another method of changing this picture format?
Thank you

Rename it to end in .jpg.
(77789)

How to change the menu button picture?

Hi,
How can I change the picture (or the 'movie frame') that appears in the sub-chapter menu buttons (those that link directly to different movies) in Encore CS5? By dedfault there appears the first frame from the sequence which in my case is black as I start my sequences with 'dip to black' dissolves. So, all of my sub-chapter menu buttons have black pictures as a result of that. I don't want to animate them, I just want to learn how to pick a frame from the sequence and turn it into a menu button picture.
Thanks

Dear Ann and Bill,
Thanks a lot for your help!
Unfortunately, I can mark only one answer as correct and I decided to give advantage to Ann as her reply was first and she is a lady.
I know Bill will not mind.
Regards,
Igor

I cannot figure out how to change the photo size on my iPhone 5s. I was given the choice of small, medium or large the first time I took a picture. Now I have no idea how to change it to medium. Can anyone help?

I cannot figure out how to change the photo size on my iPhone 5s. The first time I took a pic it asked if I wanted smalll, medium or large and listed the pixels. I chose small but am now finding that is too small. Can anyone help me set it to medium now? I can't find any setting for that. I'm a newby to iPhones and have no idea what I'm doing. Thanks for any help you can offer.

By "sending" do you mean sending email?
If so, what app are you using to take the photos on your iPhone 5? Or are the photos from a different source (saved to your Camera Roll from somewhere else, like a web page or Messages)?
My guess is that Mail gives you the option to send different file sizes when it detects you are trying to Mail a really large photo file. The size of photos on the iPhone 5 is really big and some email providers may stop your mail from being delivered if attachments are too large. Thus, Mail tries to help you by offering to resize the photo.
I suspect that if you are sending smaller files, Mail does not bother giving you options to save a smaller version. In fact, I have seen this behavior. So, if the photo is already "small enough", it gets sent as-is.
To my knowledge, there is no global iOS setting for this. Some apps may have different rules, of course.

How to change the storage location in Lightroom 3.6.?

How to change the storage location in Lightroom 3.6.?
I use my internal hard drive NTFS of my MacBook Pro as my storage location of Lightroom 3.6. being installed in Snow Leopard now but the data of my photos get too big now. I have two fast and big external hard drives eSATA now which I want to use for my data/photos. I know how to copy the data from one hard drive to another but I don't know how to change the settings in connection with Lightroom easily. I still want to watch all fotos on my MacBook Pro but don't want to save any fotos on my internal harddrive any more. Isn't it possible to have the programm Lightroom on my internal harddrive but the data on two times on two different extermal hard drives? If I look at Lightroom - settings of catalogue - I see that the internal harddrive location is my storage location now but I my two external harddrives don't appear as folders. Why? How to change that so that the external hard drives appear in Lightroom and I can watch all my fotos immediately (sometimes using external hard drive 1 and sometimes using external hard drive 2)?
My external hard drives are in HFS+ but I use the software of Paragon so that there shouldn't be any problem to read and write the data (I use also Final Cut Express so my external hard drives are HFS+ and not NTFS).
I want to impert many data from CDs - should I copy the fotos first to my external hard drive and then import it into Lightroom or is it easier to import the data directly from the CD in Lightroom so that I don't have to name the folders two times?
I see that I have to sort the fotos from the CDs in new different folders and an used to do that in Finder of my MacBookPro. In Lightroom I don't want have to click each of hundreds of fotos to be able to put it into the right folders ... But how to import only a part of a CDs quickly into the right (newly created) folders?
Kind regards, Karin

Would you really leave the names of photos like DSC05271.ARW and DSC05271.jpeg etc.?
What if I name them f.i. like ...
2013-09-11_Austria_1_mountain.jpeg
2013-09-11_Austria_2_mountain.jpeg
2013-09-11_Austria_3_valley.jpeg
I would NOT do this. I would not change the file name.
I would add keywords and other metadata to the photos to identify the content of the photos, and from that point on, I would use keywords and other metdata to search for these photos.
However, let's look at the big picture. I think there are three different methods of organizing
Organize via keywords and other metadata, and not via operating system constructs such as file name and folder name
Organize via operating system constructs such as file name and folder name, and not via keywords and other metadata
Some combination of 1 and 2
You can choose any one of the three methods above, the choice is yours. I am a very strong believer that for most people (and it sounds like you are one of those people), method 1 is the best method. However, not everyone agrees.
There are drawbacks to using file names to identify your photos. One big drawback is that you must type the information into each photo's name, and this is more tedious than if you wanted to assign the keyword "mountain" to the photos, you can assign the keyword to multiple photos at once. Also, if you mis-spell the information in the file name on any photo, you have just made the photo much harder to find; whereas in Lightroom, the keyword can be assigned via a mouse click (so you can't mis-spell it), or by typing the first few letters and Lightroom (auto-fill) will find the correct keyword name. So using keywords is a much simpler way to go.
.. is this much too complicated to do that in Lightroom or even dangerous to got lost of photos?
It is very simple to add keywords, as I explained for this case. Create keywords "Austria", "Mountain", "Valley"; then select the desired photos, and then click on the check box next to the keyword name. It is much more complicated in my opinion to rename the photos in this manner.
There is less danger in doing this via keywords than the danger doing this via file names, because of potential mis-spellings.
If I spend a lot of time in editing photos (in Lightroom or Photoshop) I don't want that I loose those photos f.i. later if Lightroom won't be the software I use regarding the photos (in 10, 20 years?!)
Lightroom will OPTIONALLY write your keywords and other metadata to the files (or sidecar files in the case of RAW). Every photographic application I know of (and I'm sure those in the future) can read the keywords and other metadata. So if you ever want to switch to some other software, your keywords and other metadata are available. you can turn this option on via Edit->Catalog Settings->Metadata, check Automatically Write Changes to XMP.
So I have to create two folders - one with the originals and one with the edited exported photos?
No, you do not have to create two folders. You don't have to export everything, but if you do, you can put the exports wherever you want, including putting them in the same folder as the originals, with different name.
Why not edit them in Photoshop and save them in the second folder which I import later in Lightroom? Because it takes longer?
Wow, you really need to think about: Why are you using Lightroom?
Could you explain this to me? Why are you using Lightroom?
If your goal is to edit the photos in Photoshop, and then put them in folders with whatever custom name you want to give them, then what is the benefit of using Lightroom? You can do all of this WITHOUT Lightroom. You keep explaining that your intended goal is to use Photoshop and folders/file names, and this is a goal which AVOIDs all benefits of Lightroom. I can't understand what you think the benefits of using Lightroom are for you.
It is starting to sound to me like Lightroom is not the right software for you.
Some people want to see a movie on their TV and are able to watch a DVD (not all!). Flickr seems to be a solution for movies in a big size (many GBs) to share them with friends (?)
You haven't mentioned this before, and you should check the rules on Flickr regarding how long a video you can upload.

IK Bone Tool - How to change the picture of a bodypart in animation?

Similar Messages

Maybe you are looking for