ILife '08, LP8, FCS 2 - issues & what is new in GB 08?

I have iLife 06 on my Mac along with LP8 and FCS 2. Would like to know:
1. What is the difference between GB 3 and GB 08?
2. Will installing iLife 08 mess up LP8 and/or FCS 2 samples?
Thanks, Rob.
Message was edited by: Rob A.

1. What is the difference between GB 3 and GB 08?
http://www.bulletsandbones.com/GB/GBFAQ.html#whatsnew08

Similar Messages

What's new with 8.0.2 any Tiger issues ?

I've just downloaded the new update without checking here first.
This is what I could find for what's new in the update;
+This Logic Pro 8.0.2 update addresses specific customer and compatibility issues of Logic Pro 8.0. It includes Waveburner 1.5.2 and Impulse Response Utility 1.0.2, which address issues for Waveburner 1.5.2 and Impulse Response Utility 1.0 respectively .+
+If you are using Logic Node you will need to update your Logic Node application on connected computers as well. After running the updater you will find an updated Logic Node installer called Logic Node 8.0.2.dmg in your Utilities folder.+
+This update is recommended for all Logic Pro 8.0 users.+
+New in Waveburner 1.5.2 (included with Logic Pro 8.0.2 update)+
+Waveburner 1.5.2 addresses specific customer issues and improves Leopard compatibility of Waveburner 1.5.+
+This update is recommended for all Waveburner 1.5 users.+
+New in Impulse Response Utility 1.0.2 (included with Logic Pro 8.0.2 update)+
+Impulse Response Utility 1.0.2 addresses specific customer and compatibility issues of Impulse Response Utility 1.0.+
+This update is recommended for all Impulse Response Utility 1.0 users.+
Does anybody have anything to add to this?
It seem like it's mainly for Leopard issues so now perhaps I'll try putting it in my Leopard macbook.
My main concern though is are there any issues with Tiger ?
One post was complaining that 2G wasn't enough ram. 2Gigs has been fine for me. Is there any reason the update would be more ram intensive?
Thanks for any help>I hope to give lots of helpful stars;)

synesthesian wrote:
always reluctant to update, but was wondering how update is working with tiger?
please tell me they fixed the core audio overload problem. is anyone having any issues with update or is there any improvements
thanks
They did, at least now my sessions open and play the first time you play them.
My caveat : I always have a little empty "preroll" of about 1 second where Logic starts up, before hitting any audio or MIDI. This seems to work best, rather than start right at region starts.
I have noticed it keeps working throughout the day, before, sometimes I would have to restart it, to get it to work... ie the audio drivers would conk out if I left the computer idle for more than 5 minutes.
Cheers

What is new in BI 7.0

I would appreciate if any of you could provide me with links to relevant documents or information on what is new for BI 7.0..
One of my main intentions is finding out information on the changes in Process Change Monitoring. As you all know the issue with the current tools in BW(3.5) is that the if the chain doesn't start. Well is hard to find out promptly, and similar situation when activations hang ..... I was thinking in creating a custom tool, but I was told that BW 7.0 do provide tools to better monitor chains. Well if anyone has information on this I would appreciate .
Thank you
Alfonso.

Hi ,
Check these links ,
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3604c604-0901-0010-f0aa-b37378495537">https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3604c604-0901-0010-f0aa-b37378495537</a>
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/a8/48c0417951d117e10000000a155106/content.htm">http://help.sap.com/saphelp_nw2004s/helpdata/en/a8/48c0417951d117e10000000a155106/content.htm</a>
<a href="/people/markus.kohler/blog/2006/06/07/welcome-to-my-new-netweaver-performance-blog:///people/markus.kohler/blog/2006/06/07/welcome-to-my-new-netweaver-performance-blog
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/6ce7b0a4-0b01-0010-52ac-a6e813c35a84">https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/6ce7b0a4-0b01-0010-52ac-a6e813c35a84</a>
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5ee3725b-0401-0010-e381-ac323362ce91">https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5ee3725b-0401-0010-e381-ac323362ce91</a>
Regards
Renjith Kumar

What is new in iOS 5.1

I was wondering, what is new in iOS 5.1? And does it fix the battery?

Updating iOS (The bottom section in the article explains what's new)
Features of the Latest Update: iOS 5.1
Network icon for AT&T now displays whether you are using 3G or 4G
Camera app shortcut now ALWAYS appears on the lock screen, no need to double tap the home button. Slide the screen upward to go to the camera app
Battery issues have been addressed
Siri now supports Japanese
More
To learn more about this update, go to Settings > General > Software Update > About this Update on your device.

Keeps coming up with "What's New" page everytime I open Firefox.

Everytime I open Firefox (5) it keeps checking whether my add-ons would work with it and then opens the "What's New" page. It's starting to get really irritating.
Is there a way to stop it from doing this?

I suspect a bad add-on. Since add-ons often are installed externally to Firefox, I suggest starting here:
Open the Windows '''Control Panel''', Uninstall a Program. After the list loads, click the "Installed on" column heading to group the infections, I mean, additions, by date. This can help in smoking out undisclosed bundle items that snuck in with some software you agreed to install. Take out as much trash as possible here.
Then, in Firefox, open the '''Add-ons page''' using either:
* Ctrl+Shift+a
* "3-bar" menu button (or Tools menu) > Add-ons
In the left column, click Extensions. Then, if in doubt, disable (or Remove, if possible) unrecognized and unwanted extensions.
Often a link will appear above at least one disabled extension to restart Firefox. You can complete your work on the tab and click one of the links as the last step.
Finally, you can "mop up" remaining issues with the scanning/cleaning tools suggested in this support article: [[Troubleshoot Firefox issues caused by malware]].
Does that clear it up?

What is new in S227

Does anyone have an ideea what is new in the newly release of S227 for P780?

After installing S227 battery is getting drained out 50% faster rate!!!!!! No point to have 4000 mamp battery pack in this situation. Request Lenovo team to resolve the issue or share the process to go back in s226. My battery is getting discharge less than a day now.

HT201364 What is new about iOS 8.1.3?

I discovered a new iOS update (iOS 8 8.1.3), what is new or what did they change in this new update?

It reduces the amount of storage needed for future updates, fixes a bug where Spotlight might not display app results temporarily, fixes an issue where some people were unable to sign into iMessage or FaceTime, and includes other miscellaneous fixes.

HT4972 What's new in ios 5.1.1(9B208)

hi!
i searched on the internet but couldn't find anything..Do you know what's new in ios 5.1.1(9B208)???

Apple has, from time to time, found issues with iOS builds and re-released them for update to devices. That may be what triggered this update. But, as of this date, Apple has not commented.

What's new in BIOS 4.50 - Satellite P100-332

Hi, a
nyone know whats the new functions on the new BIOS 4.50 for Satellite P100-332? Cause i try to click on "Toshiba Bios information" and he just loop again to the same web page... Is there anyone that knows whats new? or in a log file?

Hi guys
I can tell you that this a old story and I read about such stuttering long time ago
Many people have reported that this issue could be solved by BIOS and nVidia driver update!
This is also mentioned here in this Toshiba FAQ:
[New video driver and BIOS eliminates video 'stutter' during game play (Windows Vista) |http://askiris.toshiba.com/ToshibaSupportSite/search.do?cmd=displayKC&docType=kc&externalId=1924 764xml&sliceId=&dialogID=69796173&stateId=1 0 69794207]
So there is a solution, definitely!

What's New and What's Fixed in 2014.1

First, here are links to the two main documents about new features in the 2014.1 release:
Product Manager Al Mooney's blog: Premiere Pro CC 2014.1 Release
The What's New page in the Help: Adobe Premiere Pro Help | New features summary
(I'll review both of those documents ASAP to see if any little goodies got skipped.)
And now, the bugs that were fixed in this release:
Import
Import of CinemaDNG clip fails if the file has been renamed.
Gamma shift in some re-imported QuickTime IMX clips
Some QuickTime Reference files import without timecode.
Indexing of XDCAM clips can take an excessively long time, footage shows Media Pending until indexing completes.
XAVC-S files import without Timecode
Unable to import certain XDCAMHD 422 Long-GOP clips with Pixel Aspect Ratio of 0.7500 MXF
Spanned XDCAM HD422 clips not handled correctly if the clip names do not follow the normal convention
When a sequence is loaded from Media Browser to the Source Monitor and then inserted to a sequence without explicitly importing, two copies of the sequence are added to project.
Scaling values are not properly handled for clips/sequences imported via an XML file written by some shot management and conforming programs
If the reported duration of an XDCAM HD MXF clip shorter than the actual length in the file, then frames outside the stated duration can be accessed.
Some XAVC and XDCAM-IMX-MXF clips have audio noise introduced on playback
Some .mp4 have green frames and 'static' garbage when played in Source Monitor
Canon XF300 Footage has unacceptable performance for playback
.mp4 clips generated by certain transcoding programs exhibit poor playback performance
PPro no longer recognizes timecode from a .qtc file, referenced from within a QuickTime reference movie.
Some XDCAM422 clips fail to import with generic error
Occasional crash on opening Source Settings for DNG footage, with 2nd monitor enabled
Overexposed white areas in some CinemaDNG footage display magenta artifacts.
When scrubbing C300 clips in Project panel’s Icon view, red frames sometimes show and Event panel reports error decoding frame.
If SpeedGrade was installed before Premiere, then double-clicking a prproj file launches SpeedGrade (Mac Only)
Growing Files
The last frames of some growing file are green. Must relaunch Premiere to correct the problem.
Importing a growing file can take an exceedingly long time, with footage showing as Media Pending
When a growing file refreshes, it stops voiceover recording
The incorrect timecode is shown in the Timecode Panel for growing files.
Timeline playback of growing files drops audio for about 1 second each time the growing file refreshes.
QuickTime reference files for growing files fail to import.
Export
When source is 120fps, export fails if Match Sequence Settings enabled
The Advanced XDCAM Settings section in Export Settings is blank for imported XDCAM presets
In QuickTime encodes, audio exported as uncompressed stereo imports into FCP as dual mono.
When you export to 5.1 AAC with the “Import into Project” option enabled, the resulting clip fails to import, throwing
“File import failure”
Image flicker is introduced in some constant-bitrate MPEG2 encodes
When the only variable blocking smart rendering is an adjustment layer, the effect(s) thereon are ignored and the segment is smart rendered.
ProRes media encoded by Premiere causes are not compatible with certain video QC programs.
AAF export: 88.2kHz and 96kHz audio clips exported to AAF do not appear in some audio production programs.
Audio EDL gets wrong source timecode if clip is nested or part of a multicam source sequence
EDL does not give correct Source In and Out for clips with speed reversed.
EDL does not give correct source in and out on reversed clips.
OMF export fails with some multicam sequences, reporting Audio Export Failure.
Hang during OMF export when the sequence contains a 5.1 audio track/clip.
Smart rendering can introduce black and red frames
Playback
Playback of IMX 50 clip freezes after 12 seconds.
With XDCAMHD and DVCProHD footage, frames are sometimes dropped though the render bar is green.
Audio for some mp4 files plays back at double speed
When pre-roll is set to 1 frame, timecode and video of XDCAM .mxf files are out of sync
Some DNxHD do not decode properly, resulting in frames being played out of order
Performance of playback for some QuickTime is poor because they are unnecessarily falling back to QT32
Dropped frames when playing R3D clips with RocketX enabled and Playback Resolution at ¼
Audio
With Maintain Pitch enabled, no audio when playing at slower than real-time
Solo buttons in Audio Meters do not work for clips loaded into the Source Monitor
Mono and Standard track puck and tray panner routing for Ls, Rs, C and LFE channels do not adhere to ITU-R BR.1384 standard.
Occasional crash on switching a clip from mono to stereo via Modify>Audio Channels
5.1 channels are not properly mapped for some Dolby content.
5.1 clip changes to a 6 mono channel clip when “Extract Audio” or “Edit in Adobe Audition>Clip” is performed on a project item or track item.
Changes to Frame Rate via Interpret Footage are sometimes not applied to saved for all audio streams, causing most audio channels to be out of sync after closing/reloading project.
Constant Power audio transitions introduce buzz if either track item has zero channels (generally limited to multicam clips)
Crash on applying changes in Modify Audio Channels dialog [Mac Only]
Project Panel
Sorting by Duration is broken if the column has been moved during the current session
If the Project panel is filtered via Rapid Find when a bin is created, the edit control for naming the new bin does not become active automatically, and it cannot be activated manually until Rapid Find is cleared.
Project items cannot be deleted or renamed if the list view is scrolled to the right.
Project panel does not autoscroll to the left when a column is dragged to the right side of the Name column
When a timecode value is typed in the Video Out control for a clip in the Project panel, the value gets reduced by 2 frames upon committing the change
Subclip
When a soft subclip with only an Out Point set is edited into a sequence, the Subclip Start is ignored; the resulting track item extends all the way to Media Start.
The Media Start/End and Subclip Start/End times for subclips from a merged clip are incorrect
Editing/Timeline
3-Point edit: If the source is a sequence and only an Out Point is set for the source, the wrong segment gets inserted when KEM Roll is set to Insert as Individual Clips
Keyboard trim commands do not affect clips on targeted tracks that are outside of visible area of in the Timeline
Switching between sequences can turn the render bar red.
Frame Hold option doesn't generate the freeze frame when speed change is in effect
In the Timeline, the FX badge gets hidden when the clip is not wide enough to show the full clip name.
If the Left/Right Balance control is displayed in Timeline header, the balance will change if the mouse strays over the Header region during click-and-drag operations in the Timeline (such as trimming out)
'Select In to Out' selects clips on locked tracks.
Multicam
If time-remapping is used on a Multicam Source Sequence, the Program Monitor's multicam view continues to play at 100%; if source sequence was slowed, the Composite view goes black after the original end point.
When a multicam source sequence has been slowed down via speed change or time remapping, the extended of the clip goes black—no video
If the audio in a multicam sequence is selected when it is flattened, the audio is sometimes deleted.
Disabled multicam source clips are sometimes rendered to the composite output
The camera can be changed for a multicam clip on a locked track.
The overlay displays timecode in audio time units for part of a multicam sequence if the source clips are stereo and the MC sequence is mapped to mono
If a nested multicam sequence's duration has been increased via Time Remapping, then upon reaching the original end point during an editing pass, the composite view restarts from beginning
Flattening
If a multicam sequence’s audio is 5.1 or adaptive, then flattening deletes the audio.
Crash on flattening multicam clip with keyframed scale when using a camera angle that does not start at time zero.
Flattening multicam can remove some audio clips from the sequence.
Flattening a multicam sequence with reverse speed applied results in incorrect frames being used
Effects
AE Text Template] When text fields are active for editing, they’re not being visually highlighted
Adding mask points very close to each can result in the ordering of the points being incorrect
Incorrect scaling of 1920x1080 adjustment layers in 720 sequences
Unexpected behavior with Cross Dissolves between Adjustments Layers.
Applying both Echo & Levels effects to an adjustment layer causes video playback to freeze
Crash on rendering previews for a Lumetri filter in Software-Only mode.
Crash on deleting a clip from a sequence after pasting an effect mask to the clip.
JPG frame sequence gets scaled down if an adjustment layers is in effect above it [OpenCL only]
Rename GoPro lens distortion presets to include the camera name
Clip name effect doesn't work correctly if Source Track is set to a different track.
Crash on using Clip effect or Timecode effect on a transparent video.
Crash on loading or applying VST Effects (Mac only)
Intermittent Crash with Warp Stabilizer applied (AEVideoFilter)
The Clip Name effect does not work when applied to a transparent video track item, with Source Track set to a video clip.
Crash on applying audio transition to clips with overlapping timecode
Previewing fails when an adjustment layer has an animated mask applied to Opacity and any other video effect.
In Software-Only mode, rendering previews of the new Cross Dissolve is slower than the old one.
Masking and Tracking
Shift-dragging a control point for an effect mask sometimes yields unexpected results
If a clip has an effect with a mask applied, moving the clip in the Timeline cause rendered preview files to be lost.
Previews rendered to a P2 codec are incorrect for the first 10-30 frames of an Opacity effect with mask applied
If a mask is applied to a GPU accelerated effect on an adjustment layer, the Program Monitor shows a cropped frame with Playback Resolution at Half and goes completely black at Quarter.
Opacity effect on Adjustment Layers fails to render within the mask with tracking.
After rendering an adjustment layer with multiple effects with masks applied, some of the effects are no longer confined within the mask [Mac only]
Crash on opening some projects with masking and tracking applied to effects
Direct Manipulation control fails to switch between multiple masks that are applied to the Opacity intrinsic effect.
3rd Party
Certain audio filters cannot be applied to a clip in a sequence that is imported via XML
PPro reports audio filter missing when opening a saved project with certain audio filters applied to the clips in a sequence that was imported via XML
Artifacts are introduced when using certain 3rd party transitions.
Certain 3rd party stabilizer plug-in are not working
Markers
On mouse-up after adjusting the Out point of a marker with duration, the playhead jumps to the marker's In point.
Video in Program Monitor strobes when dragging the In or Out point of a sequence marker
GPU
With GPU acceleration enabled, Gamma is being applied to some RAW media when it shouldn’t be.
Basic 3D effect can result in Program Monitor’s video overlay to become corrupted on some GPUs
Performance (Note: Most of these fixes are also listed under a product area)
Locking all Audio Tracks can significantly impair performance.
Performance of playback for some QuickTime is poor because they are unnecessarily falling back to QT32
Dropped frames when playing R3D clips with RocketX enabled and Playback Resolution at ¼
Navigating through projects in multiple Media Browser panels impairs performance and can culminate in a crash
In Software-Only mode, rendering previews of the new Cross Dissolve is slower than the old one.
Canon XF300 Footage has unacceptable performance for playback
.mp4 clips generated by certain transcoding programs exhibit poor playback performance
Interop
Crash on selecting Edit>Edit in Adobe Audition>Sequence...
When a 5.1 clip is sent to Audition via Edit Clip In Adobe Audition, the first channel is used for all channels.
Exporting from Audition to Premiere Pro opens Premiere, but the file fails to import
After grading a sequence in SpeedGrade, Premiere regenerates index & pek files
Miscellaneous
With some capture card hardware, captured uncompressed clips have the wrong field order
In the Overlay Settings dialog, the Track control is not properly constrained by the Property control.
A single preference flag is used for the "Import into Project" setting in the Export Settings dialog and the Export Frame dialog; they should be managed independently.
Custom scratch disk location for Video and Audio Preview folders get’s reset to default, “Same as Project File"
Changes to the label color cannot be undone.
In the Usage lists, all instance are ordered by track item start time; should sort by Sequence Name first, then by track item start
Automatic relinking fails in certain cases when the name of a folder in the relative paths are too similar. [Mac only]
With OpenCL GPU acceleration and Transmit enabled with some 3rd party I/O cards, the video on the output monitor is corrupted
Newly created projects sometimes have multiple Project Panels open.
And in closing, a request: If this post prompts you to think "Great, but what about..." or "Thanks, but I just found this new bug in 2014.1," please start a new thread--after, of course searching to see if there's already a topic on that issue.
[And Shooter, I apologize in advance if the foregoing contains any typos ;-)]

Lots to be excited about. BUT...Just updated to 8.1 on one of my computers to test it out...
Sadly, the following issue is NOT fixed for me. Is it with new projects only? I haven't started a new project on 8.1 I've only opened an old project but the issue that I'm referring to which involves also a delay/freeze of anywhere from a few seconds to a MINUTE while the render bar goes from yellow to red and then back to yellow is still there. Boo.
On the list above...
Switching between sequences can turn the render bar red.
This issue is incredibly easy to replicate. I really do hope it gets fixed. Here are the steps:
1) Create two sequences with multiple short clips (the more clips the better)
2) Make sure GPU acceleration is enabled.
3) Add warp stabilizer to the clips in both sequences. Again, the more clips the longer the delay/freeze will be as the render bar goes from YELLOW to RED and then eventually back to YELLOW again.
4) Hit SAVE.
5) Now, toggle between sequences. You'll hit a short delay with a few clips stabilized and a LONG delay with lots stabilized. In my case this delay is around a full minute. The render bar will go from YELLOW to RED and then back to yellow...eventually.
6) Toggle back to the original sequence and the delay occurs again.
7) Once you've toggled between sequences and have gone through this delay, that's it, there is no longer a delay...UNTIL...(and here's the big kicker)...until the project is SAVED again. After that the issue returns when you toggle between sequences. Both saving manually and AUTOSAVING cause this issue. No way around it except not editing with GPU acceleration.
Not sure what the issue is...caching issue when saving maybe? Either way, it stinks and it's still there in 8.1. Big bummer.
Again, lots to be excited about with this release but I really was hopefully this specific issue was resolved.
Sigh.

What's new in Font Folio 11.1?

Looks like Font Folio 11.1 released today, per http://adobe.com/products/fontfolio.
Can anyone tell us what is new in the past 5 years? I had hoped for some better glyph coverage in fonts like Utopia, but I don't see any evidence of that in the documentation, but I'm still hopeful?
The list of 80 additional fonts does not seem all that exciting for Western users, but perhaps much more so for users of other Arabic, Hebrew, Devanagari, etc.
Comparing the PDF font listings, here's what the new faces are:
HypatiaPro-ExtraLight.otfHypatiaPro-ExtraLightIt.otfHypatiaPro-Light.otfHypatiaPro-LightIt.otfHypatiaPro-Regular.otfHypatiaPro-It.otfHypatiaPro-Semibold.otfHypatiaPro-SemiboldIt.otfHypatiaPro-Bold.otfHypatiaPro-BoldIt.otfHypatiaPro-Black.otfHypatiaPro-BlackIt.otfKinesisPro3-Light.otfKinesisPro3-LightItalic.otfKinesisPro3-Regular.otfKinesisPro3-Italic.otfKinesisPro3-Semibold.otfKinesisPro3-SemiboldItalic.otfKinesisPro3-Bold.otfKinesisPro3-BoldItalic.otfKinesisPro3-Black.otfKinesisPro3-BlackItalic.otfAdobeTextPro-Regular.otfAdobeTextPro-It.otfAdobeTextPro-Semibold.otfAdobeTextPro-SemiboldIt.otfAdobeTextPro-Bold.otfAdobeTextPro-BoldIt.otfTrajanPro3-ExtraLight.otfTrajanPro3-Light.otfTrajanPro3-Regular.otfTrajanPro3-Semibold.otfTrajanPro3-Bold.otfTrajanPro3-Black.otfTrajanSansPro-ExtraLight.otfTrajanSansPro-Light.otfTrajanSansPro-Regular.otfTrajanSansPro-Semibold.otfTrajanSansPro-Bold.otfTrajanSansPro-Black.otfMyriadArabic-Light.otfMyriadArabic-LightIt.otfMyriadArabic-Regular.otfMyriadArabic-Italic.otfMyriadArabic-Semibold.otfMyriadArabic-SemiboldIt.otfMyriadArabic-Bold.otfMyriadArabic-BoldIt.otfMyriadArabic-Black.otfMyriadArabic-BlackIt.otfAdobeDevanagari-Regular.otfAdobeDevanagari-Italic.otfAdobeDevanagari-Bold.otfAdobeDevanagari-BoldItalic.otfMyriadHebrew-Light.otfMyriadHebrew-LightIt.otfMyriadHebrew-LightItAlt.otfMyriadHebrew-Regular.otfMyriadHebrew-It.otfMyriadHebrew-ItAlt.otfMyriadHebrew-Semibold.otfMyriadHebrew-SemiboldIt.otfMyriadHebrew-SemiboldItAlt.otfMyriadHebrew-Bold.otfMyriadHebrew-BoldIt.otfMyriadHebrew-BoldItAlt.otfMyriadHebrewCursive-Light.otfMyriadHebrewCursive-LightIt.otfMyriadHebrewCursive-Regular.otfMyriadHebrewCursive-It.otfMyriadHebrewCursive-Semibold.otfMyriadHebrewCursive-SemiboldIt.otfMyriadHebrewCursive-Light.otfMyriadHebrewCursive-BoldIt.otfKazurakiSP2NLight.otfRyoDispPlusN-Medium.otfRyoDispPlusN-Semibold.otfRyoDispPlusN-Bold.otfRyoDispPlusN-ExtraBold.otfRyoDispPlusN-Heavy.otf
I suppose one answer is just "upgrade and find out." Looking at the case of Utopia, can I assume that the latest version from UtopiaStdReadMe.html is available? For instance, it reads:
    The following faces have version 2.096:
     UtopiaStd-BlackHeadline created Fri Dec 17 18:01:27 2010.     UtopiaStd-BoldCapt created Fri Dec 17 18:01:28 2010.     UtopiaStd-BoldCaptIt created Fri Dec 17 18:01:28 2010.     UtopiaStd-BoldDisp created Fri Dec 17 18:01:28 2010.
     UtopiaStd-BoldDispIt created Fri Dec 17 18:01:28 2010.     UtopiaStd-BoldSubh created Fri Dec 17 18:01:29 2010.     UtopiaStd-BoldSubhIt created Fri Dec 17 18:01:29 2010.     UtopiaStd-Capt created Fri Dec 17 18:01:30 2010.     UtopiaStd-CaptIt created Fri Dec 17 18:01:30 2010.     UtopiaStd-Disp created Fri Dec 17 18:01:30 2010.
     UtopiaStd-DispIt created Fri Dec 17 18:01:31 2010.     UtopiaStd-SemiboldCapt created Fri Dec 17 18:01:32 2010.     UtopiaStd-SemiboldCaptIt created Fri Dec 17 18:01:32 2010.     UtopiaStd-SemiboldDisp created Fri Dec 17 18:01:32 2010.     UtopiaStd-SemiboldDispIt created Fri Dec 17 18:01:33 2010.     UtopiaStd-SemiboldSubh created Fri Dec 17 18:01:33 2010.
     UtopiaStd-SemiboldSubhIt created Fri Dec 17 18:01:34 2010.     UtopiaStd-Subh created Fri Dec 17 18:01:34 2010.     UtopiaStd-SubhIt created Fri Dec 17 18:01:34 2010.
The following faces have version 2.097:
     UtopiaStd-Bold created Wed Mar 16 14:24:26 2011.     UtopiaStd-Bold created Wed Mar 16 14:24:26 2011.
     UtopiaStd-BoldIt created Wed Mar 16 14:24:24 2011.     UtopiaStd-BoldIt created Wed Mar 16 14:24:24 2011.     UtopiaStd-Italic created Wed Mar 16 14:24:25 2011.     UtopiaStd-Italic created Wed Mar 16 14:24:25 2011.     UtopiaStd-Regular created Wed Mar 16 14:24:26 2011.     UtopiaStd-Regular created Wed Mar 16 14:24:26 2011.
     UtopiaStd-Semibold created Wed Mar 16 14:24:27 2011.     UtopiaStd-Semibold created Wed Mar 16 14:24:27 2011.     UtopiaStd-SemiboldIt created Wed Mar 16 14:24:25 2011.     UtopiaStd-SemiboldIt created Wed Mar 16 14:24:25 2011.
version 2.097 created 2011/03/16
     Utopia Std
     Utopia Std
version 2.096 created 2010/12/17
     Added code at end of name ID 3 'Unique Name' to indicate licensing foundry.
     Remove deprecated ForceBold keyword from CFF table.
     Update OS/2 table to version 4: add WPF names name ID 21 and 22 to name table, if needed.
version 2.076 created 2009/11/23
     Corrected font menu names in name table for Mac platform names. Name
     ID's 1,2 16 and 17 are now written following the same rules as the
     Windows platform names. Previous releases put the Preferred Name
     and Style in Mac platform name ID 1 and 2, and did not write name ID
     16 and 17, for legacy issues with old Mac OS versions.
version 2.066 created 2009/08/11
     Added Windows platform name ID 8- Manufacturer.
version 2.050 created 2007/08/16
     Release for FontFolio 11... [actually a lot of bullets here!]
So can I assume FF11.1 will have Utopia 2.097? I can't really see anything in the above that looks like a user-visible change of significance...
On the other hand, FF11.1 upgrades seem to be extremely reasonably priced. List price of the upgrade is $29.95/seat (20-pack), so really that's chump-change. So I suppose I can't really go wrong. But it's hard to get excited about, especially when I already have Adobe Text and Hypatia Pro from giveaway incentives (though I guess having them in FF clarifies some potentially thorny licensing questions...)
Thanks!

Err, so I thought this would be an easy question...not so?

FF 29 What's New/Committed to privacy page keeps opening

The What's New/Committed to privacy page keeps opening. Windows 7 for the OS. Things I have tried:
Delete user.js and prefs.js. Didn't fix the issue.
Set browser.startup.homepage_override.mstone to ignore both via about:config and directly editing prefs.js (one at a time, and both at the same time). Didn't fix the issue. It just overwrote that when FF opened the next time.
Set prefs.js to read only after changing the mstone setting. Same thing, it still opened even though the file was read only and said ignore.
This is not a home page issue. I don't have multiple home pages, the what's new page is not in my home page, I'm not saving open tabs, etc.
Here is my support info:
Application Basics
Name: Firefox
Version: 29.0.1
User Agent: Mozilla/5.0 (Windows NT 6.1; WOW64; rv:29.0) Gecko/20100101 Firefox/29.0
Crash Reports for the Last 3 Days
All Crash Reports
Extensions
Name: Adblock Plus
Version: 2.6.3
Enabled: true
ID: {d10d0bf8-f5b5-c8b4-a8b2-2b9879e08c5d}
Name: Adblock Plus Pop-up Addon
Version: 0.9.2
Enabled: true
ID: [email protected]
Name: CS Lite Mod
Version: 1.4.9
Enabled: true
ID: [email protected]
Name: Download Status Bar
Version: 10.0.0
Enabled: true
ID: {6c28e999-e900-4635-a39d-b1ec90ba0c0f}
Name: Element Hiding Helper for Adblock Plus
Version: 1.3
Enabled: true
ID: [email protected]
Name: external IP
Version: 0.9.9.6
Enabled: true
ID: [email protected]
Name: FireFTP
Version: 2.0.19
Enabled: true
ID: {a7c6cf7f-112c-4500-a7ea-39801a327e5f}
Name: Forecastfox
Version: 2.2.4
Enabled: true
ID: {0538E3E3-7E9B-4d49-8831-A227C80A7AD3}
Name: IE Tab
Version: 4.0.20130422
Enabled: true
ID: {77b819fa-95ad-4f2c-ac7c-486b356188a9}
Name: IE View
Version: 1.5.6
Enabled: true
ID: {6e84150a-d526-41f1-a480-a67d3fed910d}
Name: Logitech SetPoint
Version: 6.5
Enabled: true
ID: {F003DA68-8256-4b37-A6C4-350FA04494DF}
Name: LogMeIn, Inc. Remote Access Plugin
Version: 1.0.0.1082
Enabled: true
ID: [email protected]
Name: NoScript
Version: 2.6.8.28
Enabled: true
ID: {73a6fe31-595d-460b-a920-fcc0f8843232}
Name: OpenDownload²
Version: 3.5.1
Enabled: true
ID: {210249CE-F888-11DD-B868-4CB456D89593}
Name: Password Exporter
Version: 1.2.1
Enabled: true
ID: {B17C1C5A-04B1-11DB-9804-B622A1EF5492}
Name: The Addon Bar (restored)
Version: 3.2
Enabled: true
ID: the-addon-bar@GeekInTraining-GiT
Name: WebEx Productivity Tools
Version: 2.0
Enabled: true
ID: [email protected]
Name: Windows Media Player Extension for Firefox
Version: 1.1
Enabled: true
ID: jid0-nRwp7VvCqZcSRTppwWz2npqGEKw@jetpack
Name: Xmarks
Version: 4.2.1
Enabled: true
ID: [email protected]
Name: YouTube High Definition
Version: 8.8
Enabled: true
ID: {7b1bf0b6-a1b9-42b0-b75d-252036438bdc}
Name: Download Statusbar
Version: 0.9.10
Enabled: false
ID: {D4DD63FA-01E4-46a7-B6B1-EDAB7D6AD389}
Name: Winamp Toolbar
Version: 5.6.20.9397
Enabled: false
ID: {0b38152b-1b20-484d-a11f-5e04a9b0661f}
Important Modified Preferences
accessibility.typeaheadfind.flashBar: 0
browser.cache.disk.capacity: 1048576
browser.cache.disk.smart_size_cached_value: 665600
browser.cache.disk.smart_size.first_run: false
browser.cache.disk.smart_size.use_old_max: false
browser.places.importBookmarksHTML: false
browser.places.smartBookmarksVersion: 6
browser.search.openintab: true
browser.search.useDBForOrder: true
browser.sessionstore.upgradeBackup.latestBuildID: 20140506152807
browser.startup.homepage: http://www.google.com
browser.startup.homepage_override.buildID: 20140506152807
browser.startup.homepage_override.mstone: 29.0.1
dom.max_chrome_script_run_time: 40
dom.max_script_run_time: 40
dom.mozApps.used: true
extensions.lastAppVersion: 29.0.1
font.internaluseonly.changed: false
gfx.direct3d.last_used_feature_level_idx: 0
gfx.direct3d.prefer_10_1: true
network.cookie.cookieBehavior: 2
network.cookie.prefsMigrated: true
network.protocol-handler.warn-external.dnupdate: false
places.database.lastMaintenance: 1402068187
places.history.expiration.transient_current_max_pages: 104858
plugin.disable_full_page_plugin_for_types: application/pdf
plugin.importedState: true
print.printer_HP_LJ300-400_color_MFP_M375-M475_PCL_6.print_bgcolor: false
print.printer_HP_LJ300-400_color_MFP_M375-M475_PCL_6.print_bgimages: false
print.printer_HP_LJ300-400_color_MFP_M375-M475_PCL_6.print_colorspace:
print.printer_HP_LJ300-400_color_MFP_M375-M475_PCL_6.print_command:
print.printer_HP_LJ300-400_color_MFP_M375-M475_PCL_6.print_downloadfonts: false
print.printer_HP_LJ300-400_color_MFP_M375-M475_PCL_6.print_duplex: 4390961
print.printer_HP_LJ300-400_color_MFP_M375-M475_PCL_6.print_edge_bottom: 0
print.printer_HP_LJ300-400_color_MFP_M375-M475_PCL_6.print_edge_left: 0
print.printer_HP_LJ300-400_color_MFP_M375-M475_PCL_6.print_edge_right: 0
print.printer_HP_LJ300-400_color_MFP_M375-M475_PCL_6.print_edge_top: 0
print.printer_HP_LJ300-400_color_MFP_M375-M475_PCL_6.print_evenpages: true
print.printer_HP_LJ300-400_color_MFP_M375-M475_PCL_6.print_footercenter:
print.printer_HP_LJ300-400_color_MFP_M375-M475_PCL_6.print_footerleft: &PT
print.printer_HP_LJ300-400_color_MFP_M375-M475_PCL_6.print_footerright: &D
print.printer_HP_LJ300-400_color_MFP_M375-M475_PCL_6.print_headercenter:
print.printer_HP_LJ300-400_color_MFP_M375-M475_PCL_6.print_headerleft: &T
print.printer_HP_LJ300-400_color_MFP_M375-M475_PCL_6.print_headerright: &U
print.printer_HP_LJ300-400_color_MFP_M375-M475_PCL_6.print_in_color: true
print.printer_HP_LJ300-400_color_MFP_M375-M475_PCL_6.print_margin_bottom: 0.5
print.printer_HP_LJ300-400_color_MFP_M375-M475_PCL_6.print_margin_left: 0.5
print.printer_HP_LJ300-400_color_MFP_M375-M475_PCL_6.print_margin_right: 0.5
print.printer_HP_LJ300-400_color_MFP_M375-M475_PCL_6.print_margin_top: 0.5
print.printer_HP_LJ300-400_color_MFP_M375-M475_PCL_6.print_oddpages: true
print.printer_HP_LJ300-400_color_MFP_M375-M475_PCL_6.print_orientation: 0
print.printer_HP_LJ300-400_color_MFP_M375-M475_PCL_6.print_page_delay: 50
print.printer_HP_LJ300-400_color_MFP_M375-M475_PCL_6.print_paper_data: 1
print.printer_HP_LJ300-400_color_MFP_M375-M475_PCL_6.print_paper_height: 11.00
print.printer_HP_LJ300-400_color_MFP_M375-M475_PCL_6.print_paper_name:
print.printer_HP_LJ300-400_color_MFP_M375-M475_PCL_6.print_paper_size_type: 0
print.printer_HP_LJ300-400_color_MFP_M375-M475_PCL_6.print_paper_size_unit: 0
print.printer_HP_LJ300-400_color_MFP_M375-M475_PCL_6.print_paper_width: 8.50
print.printer_HP_LJ300-400_color_MFP_M375-M475_PCL_6.print_plex_name:
print.printer_HP_LJ300-400_color_MFP_M375-M475_PCL_6.print_resolution: 4522037
print.printer_HP_LJ300-400_color_MFP_M375-M475_PCL_6.print_resolution_name:
print.printer_HP_LJ300-400_color_MFP_M375-M475_PCL_6.print_reversed: false
print.printer_HP_LJ300-400_color_MFP_M375-M475_PCL_6.print_scaling: 1.00
print.printer_HP_LJ300-400_color_MFP_M375-M475_PCL_6.print_shrink_to_fit: true
print.printer_HP_LJ300-400_color_MFP_M375-M475_PCL_6.print_to_file: false
print.printer_HP_LJ300-400_color_MFP_M375-M475_PCL_6.print_unwriteable_margin_bottom: 0
print.printer_HP_LJ300-400_color_MFP_M375-M475_PCL_6.print_unwriteable_margin_left: 0
print.printer_HP_LJ300-400_color_MFP_M375-M475_PCL_6.print_unwriteable_margin_right: 0
print.printer_HP_LJ300-400_color_MFP_M375-M475_PCL_6.print_unwriteable_margin_top: 0
privacy.sanitize.migrateFx3Prefs: true
security.mixed_content.block_active_content: false
security.warn_viewing_mixed: false
storage.vacuum.last.index: 1
storage.vacuum.last.places.sqlite: 1399787036
user.js Preferences
Your profile folder contains a user.js file, which includes preferences that were not created by Firefox.
Graphics
Adapter Description: NVIDIA Quadro K1000M
Adapter Description (GPU #2): Intel(R) HD Graphics 4000
Adapter Drivers: nvd3dumx,nvwgf2umx,nvwgf2umx nvd3dum,nvwgf2um,nvwgf2um
Adapter Drivers (GPU #2): igdumd64 igd10umd64 igd10umd64 igdumd32 igd10umd32 igd10umd32
Adapter RAM: 2048
Adapter RAM (GPU #2): Unknown
ClearType Parameters: D [ Gamma: 2200 Pixel Structure: R ClearType Level: 100 Enhanced Contrast: 50 ] D [ Gamma: 2200 Pixel Structure: R ClearType Level: 100 Enhanced Contrast: 50 ] D [ Gamma: 2200 Pixel Structure: R ClearType Level: 100 Enhanced Contrast: 50 ]
Device ID: 0x0ffc
Device ID (GPU #2): 0x0166
Direct2D Enabled: true
DirectWrite Enabled: true (6.2.9200.16571)
Driver Date: 11-11-2013
Driver Date (GPU #2): 8-21-2012
Driver Version: 9.18.13.3182
Driver Version (GPU #2): 9.17.10.2843
GPU #2 Active: false
GPU Accelerated Windows: 1/1 Direct3D 10
Vendor ID: 0x10de
Vendor ID (GPU #2): 0x8086
WebGL Renderer: Google Inc. -- ANGLE (NVIDIA Quadro K1000M Direct3D9Ex vs_3_0 ps_3_0)
windowLayerManagerRemote: false
AzureCanvasBackend: direct2d
AzureContentBackend: direct2d
AzureFallbackCanvasBackend: cairo
AzureSkiaAccelerated: 0
JavaScript
Incremental GC: true
Accessibility
Activated: false
Prevent Accessibility: 0
Library Versions
NSPR
Expected minimum version: 4.10.3
Version in use: 4.10.3
NSS
Expected minimum version: 3.16 Basic ECC
Version in use: 3.16 Basic ECC
NSSSMIME
Expected minimum version: 3.16 Basic ECC
Version in use: 3.16 Basic ECC
NSSSSL
Expected minimum version: 3.16 Basic ECC
Version in use: 3.16 Basic ECC
NSSUTIL
Expected minimum version: 3.16
Version in use: 3.16

HI prospero63,
Thank you for your question, there is a new update going out today, version 30. IF the privacy page is set for your homepage you can change this, however in the new version this campaign is no longer on the start up. You can click do not show again as well.

Issues with the New Cloud

Missing options in Media Encoder, Premiere, and After Effects.
Just got done with this chat with Richa.
It appears that there are some issues with your new version of several of your flagship programs. No way to create SMALL size video files for use on slower networks (yes, they still exist out there, I deal with them every day). And the video files have to have alpha channels so they can be overlayed on top of graphics. I am still using flash because it can do things that just cant be done with HTML 5, javascript, css. And it is compatible across almost all browsers. I don't really care what Apple says it is still a very viable program. And if you want to play it on an iOS platform all you need is a browser app to do so. (people have safari, firefox, internet explorer, google etc. so get over the fact that it doesn't work with safari on iOS for iPads and iPhones and download another browser).
But now Adobe has started pulling some real stupid mistakes on purpose or by accident. Not everyone using your production suite is working on the next blockbuster movie for Hollywood. We use these programs for other applications as well. And you have opted to leave some of those tools out of your latest release of flagship programs. What are you thinking!
We in the industry need to make video files that are small in size, that contain alpha channels, and will download over slow networks at a reasonable rate. I don't have any use for a Quicktime mov the size of the Titanic (1.2Gig) when I can compress it to a reasonable size. BUT I NEED THE ABILITY TO INCLUDE THE ALPHA CHANNEL.
And if you read in the chat session below, I would like to be able to do this without having two copies of After Effects loaded on my system. Or any of the other programs as I come across issues.
You have 2.3 million people paying you a monthly subscription. Put down the champagne and start really looking at these new versions of software for your omissions.
I will climb down off my soapbox now and hope, no pray these issues get taken care of very soon. I use your software to make a living. I am not just playing with it as a hobby. Time is money, especially when you can't deliver something to a client after you upgrade your software because you have this wonderful subscription thing that is supposed to make the world better.
You are now chatting with Richa.
Richa: We appreciate your patience and regret the inconvenience due to high wait time.
Richa: Hello. Welcome to Adobe Technical Support.
Richa: Please allow me a moment while I look into your account & verify the details.
Richa: which application are you using?
Richa: We have not heard from you for some time. Do you wish to continue to chat?
david young: After Effects, Premiere, Media Encoder. Any of these. I have downloaded CC 2014 and you have done away with several options when creating video that I use to create interactive pieces for Flash presentations. I can no longer create flvs with alpha. I cannot create H.264 with alpha.
david young: Are you still there?
Richa: yes, please wait a moment
Richa: Open the preferences of After Effects and in the output tab, click on show depriciated formats
david young: Opened prefrences/output but dont see depricated formats.
Richa: I am sorry that option is available in CC as of now, so you need to save this project as AFter effects cc version and open in the previous version and work on it
david young: Well that Sucks. I removed the previous version of the program when I upgraded. How do I get to a previous version from the app manager?
Richa: go to creative cloud app
Richa: and click on the previous version
david young: The only version available is 2014. I don't see a previous version.
Richa: Please allow me to take the remote access of your computer, so that I can troubleshoot further accordingly.
david young: You may not have remote control of my computer. Walk me through the process. And how do I lodge a formal complaint about this issue. Do you not remember why people switched from Final Cut 10 to Premiere?
Richa: We already have posted this issue online on our blogs and forums. Secondly, for the older versions, it is just a simple step in creative cloud app
Richa: All you have to do is in the dropdown menu on uninstalled apps select "Previous version" and click on the version you need to install
david young: There is no drop down menu that says previous version.

Please refer to:
Can You Save/Open CS6 Files on CS5, CS4 or CS3 – and Vice Versa? | ProDesignTools
Can You Open/Use/Export/Save Adobe CC Files on CS6 – and Back? | ProDesignTools
It has important information.
Regards
Rajshree

InDesign CC 2014 freezes on "What's New" window

Dear All,
InDesign CC 2014 is freezing up everything when it hangs on the "What's New" window which is completely a blank white. I can't close the application or force quit or do anything else…I have to shut down the computer in order to quit the application or do anything else on the computer -- it is completely frozen. When the computer restarts, InDesign CC 2014 automatically tries to start up again and freezes the computer unless I get to it before it launches and force quit before it gets a chance to freeze again.
InDesign CC is working normally, but I notice that when CC 2014 launches, it also launches InDesign CC with it and both seem to run at the same time. This does not happen when I start from InDesign CC -- only that application is then active.
"I'm also getting an Adobe warning that has begun to appear stating: "Administrator rights are required to complete Adobe add-ons installation or removal" and I'm not sure which application this is referring to or how to log in for these "rights",
Anyone else having these issues? I'm working on a Mac pro.
Small Town Gal

Sorry for not being clear. I did the fix in CC2014 and worked great.
El 06/30/2014, a las 8:40, Small Town Gal <[email protected]> escribió:
InDesign CC 2014 freezes on "What's New" window
created by Small Town Gal in InDesign - View the full discussion
Dear Alberto,
I'm not sure what vernon you're now running? Did the above fix work on the new InDesign 2014? or are you saying that InDesign CC is now working? The suggested "fix" says to open the InDesign CC folder, so I'm wondering if deleting the "What's New" folder from InDesign CC actually also removes it from InDesign 2014? and is a temporary fix for InDesign 2014, allowing it to finally launch? Thanks.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6509465#6509465
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in InDesign by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

What's new in Process Control 2.5?

Hi,
I'm looking for information about what is new in Process Control 2.5(compare to the 2.0 version)
Thank you in advance for your help,
Regards,
Julien

The key innovation of PC 2.5 is the user experience. The highlights of this innovation are:
A new user experience based on work centers which mimics the way compliance and business users actually work
A combination of top session management and sidebar navigation leads to cleaner, more intuitive design
Broad availability of relevant contextual information as appropriate, in the form of documents and links
Pervasive search functionality, with list filtering and sorting capability to deliver information as the user needs it
Automated testing
Delivered scripts cover Financials, Procure to Pay, Sales and Distribution, and more...
Rule parameters passed to scripts extract data from the source ERP system and return evaluation results with related issues or exceptions to Process Control
Query-based scripts use SAP Query to provide additional flexibility
Use of standard SAP and customer-created reports can be returned as part of evaluation and marked as requiring review to determine whether the evaluation passed or failed
ANd much much more

ILife '08, LP8, FCS 2 - issues & what is new in GB 08?

Similar Messages

Maybe you are looking for