ILife '11 won't install

I've been trying to install iLife '11 on my 2.66GHz Intel Core i5 iMac. I'm running 10.6.5. The installation gets down to about 5 minutes left and then I get this error message: "There were errors with the installation. You may want to try installing again. The installation failed. This installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance." I tried twice but no luck. I also tried my son's dvd (which worked on his machine) and got the same error at about the same point in the installation. I booted the machine into safe mode and tried again-same result. I tried using Disk Utility to repair permissions then ran the installer again-same result. Any ideas, anyone?

We assuming your purchased iLife 11 and got an original DVD, can you confirm? And specifically which app of iLife 11 isn't working? Don't attempt to use another's installation disc that came with their computer, first it's against license agreement and well as you have already found out it probably just won't work.
This is a general iMac forum, I'd recommend you do 2 things. First repost to the iLife 11 forum located at: http://discussions.apple.com/index.jspa?categoryID=1
It's possible you got defective media, you should contact AppleCare and they can assist you with that.
Roger

Similar Messages

  • ILife '08 won't install, iPhoto 7.1 won't launch now either

    Upgrading from iPhoto 7.1 to iLife '08. When I try to run the application installer, all looks good and then it unexpectedly quits. No error, no log, just quits and says to try again. Did this a few times, checked the system requirements and I'm good there. Tried to install just iPhoto '08 and that crashes too.
    So I went to see if my old iPhoto still worked and now that will not start either. I will paste the crash log bellow. I tried repairing disk permissions and verified that worked. I'm copying over my entire iPhoto library to a backup disk now (30GB), as soon as it's done i'll trash iPhoto, iMovie and iDvd from the applications folder and see if the install will work then. Not holding my breath though. Any ideas?
    iPhoto Crash Log:
    Date/Time: 2008-08-09 11:44:16.300 -0700
    OS Version: 10.4.11 (Build 8S165)
    Report Version: 4
    Command: iPhoto
    Path: /Applications/iPhoto.app/Contents/MacOS/iPhoto
    Parent: WindowServer [60]
    Version: 7.1 (7.1)
    PID: 213
    Thread: Unknown
    Link (dyld) error:
    Library not loaded: /System/Library/PrivateFrameworks/iLifeMediaBrowser.framework/Versions/A/iLifeM ediaBrowser
    Referenced from: /Applications/iPhoto.app/Contents/MacOS/iPhoto
    Reason: image not found

    Welcome to the Apple Discussions.
    Upgrading from iPhoto 7.1 to iLife '08.
    No such upgrade. iPhoto 7 and iPhoto 08 are one and the same application. (Confusing? Don't be ridiculous!)
    That crash log tells us that iPhoto is missing some important files. You need to re-install the iLife apps.
    Go to HD/ Library / Receipts and remove any pkg file there with any of the following
    iLife
    iPhoto
    iDVD
    iWeb
    iMovie
    GarageBand
    in the name. Then trash the apps from the Applications Folder and re-install.
    Though this process should not affect your data always back up first.
    Regards
    TD

  • ILife DVD won't install on G4

    I have iPhoto2 on my 5 year-old G4, and use iPhoto4 on my 2004 iBook (it came with it). I would like to have the same version of iPhoto on both machines, and sorry Apple, but I cannot afford 2 copies of iLife5 right now. So, I bought a copy of iLife on eBay from someone who had upgraded to iLife5. When I try to install from the DVD, I get this message:
    iLife cannot be installed on this computer.
    This installation cannot proceed because one of the following applications is running:
         GarageBand
         iTunes
         iPhoto
         iMovie
         iDVD
    Please quit these apps before installation.
    Nothing is running. I restarted, but same result. When I try to install from the CD, it tells me to install from the DVD. What do I do now? I have upgraded to iTunes5, but I still have the version of iMovie that came with Panther, and neither is running when I try to install. I do have iPhoto Buddy. My G4 meets the RAM and MHz requirements on the iLife box.
    Please help; I really just need to install iPhoto4, I don't care about the other apps.

    ITunes Helper is running.
    Log out of your user account, and log back in again, but immediately press and hold the shift key until the Finder has loaded. Then try your installation again.

  • HT5204 I have a purchased copy of ilife that won't install because of a certificate expiration issue. I just replaced my hard drive in my mac and I am trying to get my stuff back up and running.

    How can I reinstall my ilife 11 software?

    Unfortunately you've discovered too late how important it is to maintain an up-to-date backup of your iTunes library (and all other data of value).  You could, before wiping the drive, have considered making use of a commercial data recovery service that could (albeit at considerable cost) have extracted your library from the hard disk, even if virus infected.
    In the absence of that option, you will need to restore the content of your library from its original sources:
    Depending on your location, you may be able to re-download any iTunes Store purchases that are still available on the Store
    Likewise, most digital purchases from Amazon (including auto-rip copies of purchased CDs) should be available from the Amazon Cloud and via the Amazon Music application - the same may be true of other commercial sources for digital downloads
    Content imported from your CDs will have to imported again
    The specific situation that you describe regarding the music imported from your friend's external HDD suggests that either the source is badly organized and/or originates from a source other than iTunes (other media players may use alternative tags for information like artist, title, album, etc. that are not wholly consistent with how iTunes handle these).  Without details of the issues you're seeing it is difficult to suggest a remedy other than going through the media album-by-album, track-by-track, and correcting the inconsistencies.
    In the absence of a backup or access to the original library data there is no option other than painstakingly recreating your library as described above.  As you do so, you'll now realize how important creating and maintaining backups are - in my case I have at all times three separate duplicates of my library, in two different locations, where none is ever more than a week old compared to the content of my master library.

  • ILife '09 disk won't install on Lion - ejects!!!

    I had to erase and reinstall Lion on my Macbook Pro. Now when I put my purchased iLife '09 software disk into drive it just ejects itself without installing. Any ideas why won't install as was working before Lion and I need iWeb?? 

    Restart the computer first, see if that does anything.
    Then try resetting the PRAM.
    http://docs.info.apple.com/article.html?path=Mac/10.7/en/mh26871.html
    If that doesn't do it, you have to figure out if it is the DVD or computer.  Do different disks work?  Does the disk work in a different computer?
    Did you look at the bottom of the disk for finger prints and scratches.  Be nice when you clean it.  Don't scratch it more...
    Good luck!

  • Keynote won't install from CD

    I just can't figured it out why after i install iwork '09 out from CD, only keynote won't open. I did the procedure 3 times already on my macbook pro lion... installation and software upgrades and such... but still only keynote won't install properly. Instead, it requires serial number to think it should not because it comes from the CD. The rest like pages and numbers are both working properly. I need help... i don't know what to do anymore.

    sorry, maybe I did not explain myself
    the downloadable version was made available two years AFTER the disk you're trying to install, and it was an add-on to an existing installation of ilife 08
    so you won't be able to partially install ilife 06 because your system is not supported, and you won't be able to easily download the more recent version because it was pulled by apple
    so your only chance is find someone willing to upload the app (160MB) somewhere, or look for it on a p2p website (which borders the illegal, so you might not want to ask about it here)

  • Windows Vista won't install Ipod

    Latest version of Itunes 7.4.2 has been installed, unfortunately Windows Vista has located Ipod mini in "other devices" in "Device Manager", but it won't install the Ipod. I've reinstalled Iteune three times and searched the Windows Vista disk, but with no luck.
    I'm on the verge of selling the ipod - any advice would be welcome.
    Thanks

    I suggest either getting a Mac or going back to Windows XP because Vista is known to have these problems.

  • My new blank hard drive won't install OSX from the disk?

    For some reason my Mac book pro won't install OS through the install cd or through the flash drives. It will load the disk but then freeze when I click install. It won't load through the USB either. I have done multiple diagnostics at the mac store and they tell me that my hd is bad. Twice the hd was fresh out of the box and installed that day. I spoke to a supervisor via phone when I called apple care and he told me that unless I have all apple parts in the computer they can't accurately diagnose the issue. It feels like they're trying to con me into paying double for a "apple hd". What can I do to get my computer working?

    I would purchase an external USB enclosure for the HDD. With the HDD in the enclosure, install OSX and then mount in your MacBook. If you continue to have problems, it could be a faulty internal SATA cable.

  • ITunes won't install (at all) on my Windows 8.1 64 bit computer

    I've tried downloading iTunes for Windows 8.1 64-bit computers and it won't install on my machine. I did everything like I think I was supposed to ... but nothing happens. In addition I've tried connnecting my iPhone 5S to a USB port ... nothing good happens. My computer recognizes the iPhone but it won't do anything with it. Also I've tried the suggestions from "windows 8.1 itunes wont recognize iphone: Apple Support Communitites" which entertains that I can open control panel ... find Device Manager and try to install new driver software from my disk ... with the suggestion that I 'browse' and find "C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers. ... and "Apple" does not exist under Common Files of either "Program Files" or "Program Files (x86)"
    So now what????

    What is the full text of the error message?
    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    If the advice above doesn't resolve things you could try this alternate version:
    iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
    which is a 64-bit installer for the 32-bit version of the core application, similar to previous 64-bit releases.
    Or roll back to the previous build:
    iTunes 12.0.1.26 for Windows (32-bit) - iTunesSetup.exe (2014-10-16)
    iTunes 12.0.1.26 for Windows (64-bit) - iTunes64Setup.exe (2014-10-16)
    tt2

  • Creative Cloud Desktop app won't install error 207; Adobe server?

    Is there a problem with some of Adobe.com servers? My employer just purchased a CC subscription for my work Mac, and the CC Desktop App won't install. I've restarted my Mac, quit all Adobe products, redownloaded the DMG file (creativecloudinstaller.dmg), and checked to make sure my firewall is off. But I still get an error message #207. My DNS servers are set to the same ones that other Macs in my group are set to, and they have CC on their Macs.
    I don't know if it's related, but I can't load "adobe.com" in my browser, either. All other webpages are fine, including (obviously) this forum.
    I am using OS 10.8.5, connected via Ethernet, and my browser is Chrome.

    Thank you for your help, Ned. I also called Adobe help via phone, and he confirmed that my company's server needed to whitelist several Adobe sites. The company had revised their servers not long ago, and evidently did not transfer their old whitelists (which is why my coworkers had previously been able to access Creative Cloud). The phone support person emailed me a helpful list that I could forward to our company's tech support center—but the link you supplied in your response was also perfectly relevant.

  • CS4 master Collection won't install on XP

    After paying the big bucks for this CS4 Master Collection software, I can't get it to install. I have 1.5 gig of ram, all slots full. Will it not install with that? The install won't let me install on a drive with 123 gig of free space, the install pop-up says there's not enough room please change location. I change it to another drive with 197 gig of open space and it won't install.
    Customer service is closed until Monday...I'll be back in class and don't get out until 8pm every frickin weekday.
    I'm working on a sony the runs 3.20 ghz with the 1.5 gig of RAM. I just reformated the harddrive but windows takes up the C: partition but the extention is 123 gig, and I have several other drives (with hundreds of gigs open) I've tried to put it on....it says they're too small.
    I've tried to install the trial version and it does the same thing. I'm at my wits end with this!
    If there's only one out there willing to help me I would really appreciate, because Adobe doesn't seem to give a fig about helping me.

    How much free space is on the C:/drive? Without a lot of room you'll have a hard time installing any program even if you install it to a different drive. Windows needs lots of free space on C: for installing applications.
    If you have little free space, then whoever set up that machine did a very poor job of it. There is no benefit at all to installing applications on a different drive than the operating system.
    Bob

  • OVI Won't install on my XpressMusic 5730 (hangs at...

    I am trying to install the OVI application on my phone so that I can download apps and games but it won't install. After the install it starts up and I see the loading screen but that is all that I get. I do get an icon for OVI but if I try to use it it just does the same thing. Does anyone know how to resolve this? I have tried doing a hard reset and that does not resolve the issue at all.

    Hi Smileyfrog,
    Could you be more specific about your issue.
    Which operating system do u use?
    Which model handset you use?
    Which firmware version do you have in your mobile? ( *#0000# will reveal the details)
    Are you trying to connect thru cable or thru Bluetooth?
    Which version of OVI suite you use?
    Go to OVI suite -> help -> About nokia OVI suite -> System information. Paste the information...
    Please attach a screen-shot of the issue which you are mentioning.
    Regards,
    Diwa
    If you like my post, kindly acknowlege the same by giving a kudos to me

  • I am trying to install Mavericks on my McbookAir, but it won't install, saying that my hd is used for time machine backups. I have an external HD connected to my mbAir that I'm using for time machine.

    2012 Macbk air, with OSX 10.8.5. See my question above. Mavericks won't install on my Air's HD, says that both the HD - AND - the external HD (which has a different name from the laptop HD) are used for time machine backups. I've deleted my time machine plists, restarted, repaired permissions, turned time machine off, repeatedly selected the external drive in time machine preferences. HELP. (Install went perfectly on my desktop Mac, which also has an external HD for time machine).

    I need to add that the only place I have the "Backups.backupdb" folder is on my backup external disk, and it's not on my HD    :-(    . If it were, I'd delete it!

  • TS1702 I tried to download the upgrade, now it won't install and I can not access my documents. It said Vi did not have enough space for the upgrade so I made room but still no luck.

    I tried to download the upgrade, now it won't install and I can not access my documents. It said Vi did not have enough space for the upgrade so I made room but still no luck. If I delete the ap and reinstall I will lose my stuff. Any ideas? It won't open so I can email it to myself.

    What upgrade are you trying to install? Your profile shows iOS 5.1.1, which is the current max iOS.
     Cheers, Tom

  • Application (WMF 3.0) won't install during maintenance window, but will install when there is no maintenance window

    Hi All,
    I'm just getting into the Application model in SCCM 2012 R2 and I like what I see so far, but i'm running into an issue.  When i set up an Application for WMF 3.0 with a prerequisite of .Net 4.0 and deploy it to a set of test systems that do not have
    any maintenance windows applied to it, it works great.  If it doesn't have .Net 4.0 it installs both that and WMF 3.0 and reboots.  If it already has .Net 4.0, it will skip that and just install WMF 3.0 and reboot. 
    However, if i deploy it to systems that have a maintenance window applied, the application recognizes that it needs .Net and WMF 3.0 or just WMF 3.0, but it never actually runs. 
    Here is the applicable entry from the appintenteval.log, and i've bolded the line where it shows that WMF 3.0 is not installed
    ScopeId_DDF2880D-575F-42D9-A30B-E026F0EFDA4F/DeploymentType_0418fd00-0911-41d8-97f5-d7f04f58bd66/12 :- Title = WMF 3.0, Direct seleted dependencies = ScopeId_DDF2880D-575F-42D9-A30B-E026F0EFDA4F/DeploymentType_4e541fdb-f444-4c5f-91f9-82c358325558/7 title=.Net
    4.0,     AppIntentEval    4/24/2014 8:20:19 AM    1768 (0x06E8)
    ScopeId_DDF2880D-575F-42D9-A30B-E026F0EFDA4F/DeploymentType_0418fd00-0911-41d8-97f5-d7f04f58bd66/12 :- Current State = NotInstalled, Applicability = Applicable, ResolvedState = Installed, ConfigureState = NotNeeded, Title = WMF 3.0    AppIntentEval  
     4/24/2014 8:20:19 AM    1768 (0x06E8)
    ScopeId_DDF2880D-575F-42D9-A30B-E026F0EFDA4F/DeploymentType_4e541fdb-f444-4c5f-91f9-82c358325558/7 :- Current State = Installed, Applicability = Applicable, ResolvedState = Available, ConfigureState = NotNeeded, Title = .Net 4.0    AppIntentEval  
     4/24/2014 8:20:19 AM    1768 (0x06E8)
    ScopeId_DDF2880D-575F-42D9-A30B-E026F0EFDA4F/Application_de66c10e-111e-4d68-95a8-5cee3f144081/13 :- Current State = NotInstalled, Applicability = Applicable, ResolvedState = Installed, ConfigureState = NotNeeded, Title = WMF 3.0    AppIntentEval  
     4/24/2014 8:20:19 AM    1768 (0x06E8)
    ScopeId_DDF2880D-575F-42D9-A30B-E026F0EFDA4F/RequiredApplication_de66c10e-111e-4d68-95a8-5cee3f144081/13 :- Current State = NonCompliant, Applicability = Applicable, ResolvedState = Compliant, ConfigureState = NotNeeded, Title = ApplicationIntentPolicy  
     AppIntentEval    4/24/2014 8:20:19 AM    1768 (0x06E8)
    and here are the entries from the AppDiscovery.log that are relevant:
    Entering ExecQueryAsync for query "select * from CCM_AppDeliveryType where (AppDeliveryTypeId = "ScopeId_DDF2880D-575F-42D9-A30B-E026F0EFDA4F/DeploymentType_4e541fdb-f444-4c5f-91f9-82c358325558" AND Revision = 7)"    AppDiscovery  
     4/24/2014 8:20:19 AM    2776 (0x0AD8)
        Performing detection of app deployment type .Net 4.0(ScopeId_DDF2880D-575F-42D9-A30B-E026F0EFDA4F/DeploymentType_4e541fdb-f444-4c5f-91f9-82c358325558, revision 7) for system.    AppDiscovery    4/24/2014 8:20:19
    AM    2776 (0x0AD8)
    +++ Discovered application [AppDT Id: ScopeId_DDF2880D-575F-42D9-A30B-E026F0EFDA4F/DeploymentType_4e541fdb-f444-4c5f-91f9-82c358325558, Revision: 7]    AppDiscovery    4/24/2014 8:20:19 AM    2776 (0x0AD8)
    +++ Detected app deployment type .Net 4.0(ScopeId_DDF2880D-575F-42D9-A30B-E026F0EFDA4F/DeploymentType_4e541fdb-f444-4c5f-91f9-82c358325558, revision 7) for system.    AppDiscovery    4/24/2014 8:20:19 AM  
     2776 (0x0AD8)
    Entering ExecQueryAsync for query "select * from CCM_AppDeliveryType where (AppDeliveryTypeId = "ScopeId_DDF2880D-575F-42D9-A30B-E026F0EFDA4F/DeploymentType_0418fd00-0911-41d8-97f5-d7f04f58bd66" AND Revision = 12)"    AppDiscovery  
     4/24/2014 8:20:19 AM    2508 (0x09CC)
        Performing detection of app deployment type WMF 3.0(ScopeId_DDF2880D-575F-42D9-A30B-E026F0EFDA4F/DeploymentType_0418fd00-0911-41d8-97f5-d7f04f58bd66, revision 12) for system.    AppDiscovery    4/24/2014 8:20:19
    AM    2508 (0x09CC)
    +++ Application not discovered. [AppDT Id: ScopeId_DDF2880D-575F-42D9-A30B-E026F0EFDA4F/DeploymentType_0418fd00-0911-41d8-97f5-d7f04f58bd66, Revision: 12]    AppDiscovery    4/24/2014 8:20:19 AM    2508
    (0x09CC)
    +++ Did not detect app deployment type WMF 3.0(ScopeId_DDF2880D-575F-42D9-A30B-E026F0EFDA4F/DeploymentType_0418fd00-0911-41d8-97f5-d7f04f58bd66, revision 12) for system.    AppDiscovery    4/24/2014 8:20:19 AM  
     2508 (0x09CC)
       ActionType - Install will use Content Id: Content_c6b448d0-7b59-4796-bb29-3f7fbfa6e70d + Content Version: 1 for AppDT "WMF 3.0" [ScopeId_DDF2880D-575F-42D9-A30B-E026F0EFDA4F/DeploymentType_0418fd00-0911-41d8-97f5-d7f04f58bd66],
    Revision - 12    AppDiscovery    4/24/2014 8:20:20 AM    2508 (0x09CC)
    I have a 2 hour maintenance window applied to this system.  From the serviceWindowManager.log:
    OnIsServiceWindowAvailable called with: Runtime:7200, Type:2    ServiceWindowManager    4/24/2014 8:20:21 AM    1768 (0x06E8)
    No Service Windows exist for this type. Will check if the program can run in the All Programs window...    ServiceWindowManager    4/24/2014 8:20:21 AM    1768 (0x06E8)
            Biggest Active Service Window has ID = {02B82DF5-3360-4BCC-8154-9258F0B856C3} having Starttime=04/24/14
    08:20:00    ServiceWindowManager    4/24/2014 8:20:21 AM    1768 (0x06E8)
                Duration is 0 days, 02 hours, 00 mins, 00 secs    ServiceWindowManager    4/24/2014 8:20:21 AM    1768 (0x06E8)
    FindBiggestMergedTimeWindow called with TimeStart=04/24/14 08:20:21 and TimeEnd=04/24/14 10:20:00    ServiceWindowManager    4/24/2014 8:20:21 AM    1768 (0x06E8)
            Biggest Chainable Service Window for Type=1 not found    ServiceWindowManager    4/24/2014 8:20:21 AM    1768 (0x06E8)
    I'm not sure what else to try next and appreciate any help anyone can offer.

    Thanks.  I checked that setting and i have it set to false, so i don't think that's it. 
    I've done a little more experimenting.  I've changed my maintenance window back to 30 minutes.  Prior to the MW opening, i'll run an application evaluation deployment cycle on the system.  It will show the system as required WMF 3.0 but since
    the MW isn't open, it won't install at the time. 
    When the MW opens, i'll watch the ServiceWindowManager.log and it sees that it's a 30 minute MW and that the run time is 15 minutes but it still says the program can't run:
    ActiveServiceWindow has 1800 seconds left    ServiceWindowManager    4/24/2014 2:20:00 PM    2032 (0x07F0)
    Program can run! Setting *canProgramRun to TRUE    ServiceWindowManager    4/24/2014 2:20:00 PM    2032 (0x07F0)
    OnIsServiceWindowAvailable called with: Runtime:900, Type:6  
     ServiceWindowManager    4/24/2014 2:20:00 PM    2032 (0x07F0)
            Biggest Active Service Window for Type=6 not found    ServiceWindowManager    4/24/2014 2:20:00 PM    2032 (0x07F0)
    Program cannot Run! Setting *canProgramRun to FALSE    ServiceWindowManager    4/24/2014 2:20:00 PM    2032 (0x07F0)
    OnIsServiceWindowAvailable called with: Runtime:900, Type:2    ServiceWindowManager    4/24/2014 2:22:32 PM    816 (0x0330)
    If however, i kick off another application evaluation deployment cycle on the system during the open MW, the deployment kicks off right away and finishes. 
    Program can run! Setting *canProgramRun to TRUE    ServiceWindowManager    4/24/2014 2:22:32 PM    2940 (0x0B7C)
    OnIsServiceWindowAvailable called with: Runtime:900, Type:3    ServiceWindowManager    4/24/2014 2:23:49 PM    816 (0x0330)
    No Service Windows exist for this type. Will check if the program can run in the All Programs window...    ServiceWindowManager    4/24/2014 2:23:49 PM    816 (0x0330)
            Biggest Active Service Window has ID = {02B82DF5-3360-4BCC-8154-9258F0B856C3} having Starttime=04/24/14 14:20:00    ServiceWindowManager    4/24/2014 2:23:49 PM    816 (0x0330)
                Duration is 0 days, 00 hours, 30 mins, 00 secs    ServiceWindowManager    4/24/2014 2:23:49 PM    816 (0x0330)
    ActiveServiceWindow has 1571 seconds left    ServiceWindowManager    4/24/2014 2:23:49 PM    816 (0x0330)
    Program can run! Setting *canProgramRun to TRUE    ServiceWindowManager    4/24/2014 2:23:49 PM    816 (0x0330)
    This is not the behavior i would expect.  I would think that if the client knows it has a pending application deployment that is required, when the MW opened up, it would start the install immediately or close to the beginning of the MW.  It shouldn't
    need to have an application evaluation deployment cycle kicked off during the MW. 

Maybe you are looking for

  • Header and Footer Items in Adobe Muse? Also Menu text being cut off half way.

    How can I make the header and footer items load faster in Adobe Muse? I am hosting with Business Catalyst. Everything else loads almost immediatly on my web page, but my Header and Footer graphic- wood grain picture- take almost 10 seconds to load, a

  • BAPI To get GL Line items (Open Item Managed GL)

    Hi,   I am looking for a BAPI to get GL open line items that usually I can download from FBL3N.  This is required for Open Item managed GLs. The BAPI can be similar to that of BAPI_AP_ACC_GETOPENITEMS or BAPI_AR_ACC_GETOPENITEMS. Thanks in advance fo

  • NEW - why is this in the description of the IWORK suite

    It says NEW up in the corner of the ad. I think I have owned it for quite a while. Shouldn't there be a new rev in the near future? I was hopeing for that when I saw NEW in the advertisment. Is there any talk of something that is really new? Mr C

  • Help tuning the query on NAST table .

    I have the below query on NAST table which is performin very badly: SELECT objky INTO TABLE i_objky      FROM nast      WHERE kappl = c_kappl                  AND   ( ( kschl = c_kschl_zbax )             OR ( kschl = c_kschl_zoem ) )      AND   vstat

  • IPhoto Email Templates can't be viewed

    I can create a template and email it, but the recipient and I are unable to view the template at all. It just shows a question mark on the message body. What am I doing wrong? Does the recipient need to download something to be able to view the templ