ILife crayons seem not to match the html hex color codes?

anyone to confirm that apple did not care about matching html hex color conventions with its crayons. eg. honeydew crayon looks so much different from f0fff0

I don't think those crayons are used for Web accurate colors. They're just descriptive if you're not particular about a specific shade.
You might want to look at an extension of Apple's Color Picker here.
http://mactheweb.com/software-review/enhancing-apples-colorpicker/

Similar Messages

HT4914 I turn on the iTunes Match in my iphone3GS, but the itme of "show all musics" not show up and turn on, so when I open musics in my iPone3GS, the musics seems not be matched with iClouds.

Dear Sirs,
I turn on the iTunes Match in my iphone3GS, but the itme of "show all musics" not show up and turn on, so when I open musics in my iPone3GS, the musics seems not be matched with iClouds.I means it doesn't work on.

Hello there Jameskuo47,
In researching the issue you are experiencing I found an article that should help get your iTunes Match content to your iPhone. The name of the article is iTunes: How to add a computer or iOS device to iTunes Match and you can find it here: http://support.apple.com/kb/ht4913.
This section specifically:
To add an iOS device to iTunes Match
On your iOS device, go to Settings > Music.
Note:
iTunes Match requires iOS 5.0.1 or later; you can find the
latest iOS software here'
Tap the iTunes Match switch to On.To access your music in iCloud, open the Music Player app on your device.
Your music in iCloud will be integrated into your local music library. A download button will appear to the right of any content that you have in iCloud that doesn't already exist on your device.
Important:
When enabling iTunes Match on your iOS device, the music library on your iOS device will be deleted and then replaced with your music in iCloud.
Syncing music with iTunes will be disabled while iTunes Match is enabled on your iOS device.
By default, when adding an iOS device to iTunes Match, downloading over a cellular network is enabled1. To disable downloading over cellular for iTunes Match, choose Settings > Music > Use Cellular Data > Off.
All the best,
Sterling

RH8 - HTML Design view is not displaying what the HTML specifies.

I recently edited a template (Master page) that includes tables. Now the design view of the master page does not correctly display the HTML for that page
and the design view of each page that uses that Master Page displays blank tables. The HTML view includes the content, but the design view does not.

I understand the use of Master Pages. The topics were already associated with the Master page that included tables and the
Design view displayed the content perfectly. It wasn't until I edited the color of the cell borders in the Master page that everything went haywire.
As it is now, the design view is completely unusable for me. This adds a layer of inconvenience that is time consuming. I'm just trying to get the design view back to what it was earlier today.

Error: . fields not displayed because the HTML form was not yet opened.

I had created a data base application using Import from one workspace(schema1) to another workspace(schema2).
Created all the tables and data in schema2.
Now when I'm trying to run the page getting the following error
" Error: Item "P16_PRODUCT" was not displayed because the HTML form was not yet opened. "
I'm not able to figure out what is that I'm missing during import due to which form is not opening.
Removed the authorization from the pages in order to test the page. So, I don't think this is related to Authorization.
Please help me in identifying the issue.
Thanks,
Suresh.

Hello Suresh,
>> I had created a data base application using Import from one workspace(schema1) to another workspace(schema2).
Is the APEX version on both workspaces are the same? What is the APEX version?
Please make sure that the page template you are using includes #FORM_OPEN# in the last line of the Header section.
Regards,
Arie.
&diams; Please remember to mark appropriate posts as correct/helpful. For the long run, it will benefit us all.
&diams; Author of Oracle Application Express 3.2 – The Essentials and More

The pt 3 tutorial code doesn't match the pt 2 tutorial code. Nowhere to insert head in pt 2 code.

At the end of the part 2 tutorial, this was the code:
@charset "utf-8";
/* CSS Document */
#container {
width: 968px;
background: #FFF;
margin: 0 auto;
padding-left: 10px;
padding-right: 10px;
overflow: hidden;
}#main_image {
background-image: url(images/main.jpg);
background-repeat: no-repeat;
#container #main_image {
height: 376px;
width: 968px;
#left_column, #center_column, #right_column {
width: 316px;
float: left;
#center_column, #right_column {
margin-left: 10px;
The part 3 tutorial instructed this:
Copy the <script> tags from the Edge Web Fonts site, and paste them into the <head> section of index.html in Dreamweaver just above the <link> that attaches the style sheet like this:
<head>
<meta charset="utf-8">
<title>Check Magazine</title>
<script src="http://use.edgefonts.net/sarina.js"></script>
<link href="styles/check_cs6.css" rel="stylesheet" type="text/css">
</head>
As you can see from the code at the end of part two (listed at the top), there is no reference to <head> anywhere in the code; therefore, I am uncertain as to where to insert these code instructions.

I assume that the embedded tags are in the index document, not the styles type document?   I appreciate the information, but I don't see how it relates to my question. Maybe your answer was just over my head? My original question was: If the instructions say this:
Copy the paste them into the section of index.html in
Dreamweaver just above the that attaches the style
sheet like this:
and there the word does not appear anywhere on the index file that I can see it (whether it's embedded or otherwise), where do I insert the code?
Date: Fri, 8 Feb 2013 10:29:29 -0800
From: [email protected]
To: [email protected]
Subject: The pt 3 tutorial code doesn't match the pt 2 tutorial code. Nowhere to insert <head> in pt 2 code.
    Re: The pt 3 tutorial code doesn't match the pt 2 tutorial code. Nowhere to insert in pt 2 code.
    created by Nancy O. in Dreamweaver - View the full discussion
The pair of and tags are an integral part of any HTML document. When you create a new page in DW, it automatically creates the core HTML tags for you, so in that regard, there's nothing for you to add except content and styles. Embedded CSS styles are inserted inside the document's tags like so:       body      #LeftSideBar       #RightSideBar      #MiddleContent
External CSS is a separate physical file to which all your HTML pages are linked. Similar to above, links to external style sheets go inside the tags like this:
HTML & CSS Tutorials - http://www.html.net/http://w3schools.com/ Nancy O.
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5058678#5058678
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5058678#5058678
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5058678#5058678. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Dreamweaver by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

The safari can search website but it can not go through the icon. screen color blacken. solution?

the safari can search website but it can not go through the icon. screen color blacken. solution?

Try clearing Safari's cache : Settings > Safari > Clear Cache (and Clear History)
If that doesn't work then try closing Safari completely and then re-open it : from the home screen (i.e. not with Safari 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Safari app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
A third option is a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

The ability to color code layers...

Dear Apple,
The ability to color code layers would be the biggest time-saving boost to my workflow that I can imagine.
All layers look so much alike. Add constantly scrolling through dozens or hundreds of them, expanding and contracting often. Loosing ones bearings within the layers window is a given. It seems every few minutes, I have to stop and re-figure out where things are.
If one could right-click to set a layer header one of eight or so colors (like in photoshop and just about every other program that uses layers) this would increase my productivity quite a bit.
The rant ends. We now return you to your regularly scheduled forum.

Granted, color-coding layers could be very helpful. That said, I find that group and layer labeling, and intuitive grouping and organization go a long way to keeping things straight.
I don't think I've ever done a project with a hundred layers, but I've been as high as 40-50 before and never really had a hard time keeping track.
Now, there is a shortcut that you might find useful. If you hit the X key on your keyboard, Motion will separate all the layers currently active in the canvas at the playhead's position ala Expose. This will allow you to select any layer easily. When you do so, the layer will become visible in the layers pane no matter how deep it's hidden.
Finally, there is a feedback thread for product suggestions that is actually read by the Motion team, unlike this forum.
Andy

{tag_pagecontent} and other html... Not working in the HTML item

Hello All,
I have a Muse HTML item placed on the page... the contents contain the following:
<div class="bodyarea">
{tag_pagecontent}
</div>
.bodyarea is stored in a style sheet outside of muse....
When I publish to Catalyst from Muse, my "Page Content" is not surrounded by the "bodyarea" div
Does the HTML item delete all other html or code when the {tag_pagecontent} tag is placed withing in ????
Thanks

Hi Brad,
I'm still in development, so I'm not paying for it just yet...
Correct... I have a several template pages in Muse, on one of the template pages I have an HTML object with the following code inside of it... I figured, I'd add the .bodyarea div inside of Muse, so I do not have to add it within the "Content" area of every page I create in Catalyst that uses this template.
<div class="bodyarea">
{tag_pagecontent}
</div>
.bodyarea is defined withing my modulestylesheets.css file
When I add the following from within a Catalyst page that uses the Muse template, the styles take affect...
<div class="bodyarea">
page content, blah, blah....
</div>
As before, when I define the <div> from with Muse, it doesn't show up in the html when I preview the code.
Does that make sense?
Just wondering why within the "html" object in muse, it's not working.
Also, yes... the page that I was testing has that template applied to it.
Thank you

Not to display the HTML markup tags in JSP

Hi all,
Im my struts FormBean i have a String variable which contains HTML tags ( e.g <P> this is a sample text </p><br>....)
If the markups are not to be displayed in the resulting JSP, what should be done?
-Seshu

If I understand your question, and you want the value of the String variable outputed in the HTML, like showing HTML source, replacing '<' with "<", '>' with ">", '&' with "&", and '"' with """ will do the trick and is XHTML-safe. (Replace the '&' character first)

Actionscript not working on the HTML file PLEASE HELP

Hello,
I made a website in flash, you can download everything here, because I need this problem fixed by Monday http://www.mediafire.com/?sharekey=e5d0b30598ff413aa0f2f20c509059d9e04e75f6e8ebb871
The problem is, when I publish the file, and run the html file, the actionscript doesn't work. When I run the project in flash it works perfectly. I do not believe it is the player or anything of that sort that is wrong, although I can not be sure. I've tried this on like 10 different computers, and none were able to load the actionscript. Does anyone know why the actionscript wouldn't be working when I run the html file for the site?
Please Help, Thank you.

Hi !
Don't panic yet
I think you didn't select the Flash with SFCommand in the HTML tab inside the Template dropdown menu, that's the reason your Actions Scripts doesn't work in the html view.
To access hold down CTRL+SHIFT+F12--->HTML tab--->The first dropdown menu at the top
Hope this solve your problem.

Metatags - where to paste the HTML metatag source code???

HELP HELP HELP! I'm pretty new to iWeb and have published a few small sites. I'd like to embed some metatags into the html CODE source file and don't know where to look to add it in?
The only thing I can see on the help screen is addition of a HTML snippet which doesn't work as I need to embed the metatags into the actual source code in a certain position....
does anyone at all know how to do this? I have the html metag coding but don't know where to drop it in???
I hope this makes sense.... THANK YOU TO ANYONE OUT THERE..

See....
http://discussions.apple.com/thread.jspa?threadID=2460450&tstart=0

JSF seems not to support the use of the back buttons and html frames.

I�m having the following problem. I have a JSP which contains a button that register a listener. Here is part of the code:
<h:command_hyperlink label="<%=engineBean.getId()%>" commandName="<%=engineBean.getId()%>">
<f:action_listener type="helloDuke.CommandAction"/>
</h:command_hyperlink>
This action listener only forwards the request to other simple JSP.
The problem appears in the following situation:
1 � I click in the button that generates the event that will be processed by helloDuke.CommnadAction listener.
2 � It forward to a second JSP page.
3 � This second page is rendered to the user properly.
4 � The user clicks in the browser�s back button to return to previous page.
Then if is the user clicks in first page button, the CommandAction listener was removed. You must click again in the button to forward to the correct page.
The same happened if you are using html frames. If you have a frame with 2 pages and both pages register action listeners.
The last loaded page cleans the actions listener of the other.
Does anybody have any solution?.
It seems JSF doesn�t support the use of frames and I think that in some situation the frames are the solution to several problems.
Any help will be really appreciated.

Using the saveStateInClient=true produces a faulty output when using the command_button and an action_listener. The page that is rendered is totally useless: the button won't work, and due to the faulty rendering there's an output like: >com.sun.faces.saveStateMarker
So, why is it, that pressing the button (not using the saveStateInClient option) will only work the second time, same thing pressing the backbutton. Pressing the reload button will toggle between two pages - the one before the session id is assigned and the one that it's supposed to show.
Any guess will be greatly appreciated !!!!

Hi, I am from Palestine trying to use visa card to purchase an application. It doesn't work because my country seems not included in the list. I hope to find a solution for that . Thanks in advance

my country is not included for visa card options

Nope. You can only have one credit card attached to an account at a time. Its not that big of a deal to use two accounts, users do this all the time. Create the second account(UK Account) in iTunes on your computer...sign out of your Italian account first. Then authorize your computer for this new account: Store>Authorize this computer. Then sync your phone. Now, to switch accounts on your phone: Settings>Store...tap the ID shown...sign out...then sign back in with the ID you want to use.

Programm not installed on the iPhone, unknown error Code 0xE8000001

i tried to synch my iphone after installing OS4 on my iPhone and get the above error code by some applications. Other applications are installed without any problems.
I have had the some problem with syncing the apps we the new iPad. Also there i get the above error code for some apps. But also there some are installed without any problems.
If i install the apps trough the App Store once again, it's working.
Has somebody any idea to solve the problem?
Thanks

I experienced a similar problem as it occured to Edgar. After a painful update of my iPhone to OS 4.0 none of my apps was installed on my phone. I tried to sync my iPhone via iTunes and everythng seemed to by right.
But at the end of the sync I was told that some of my apps (to be honest: not one) could not be installed because of "an unknown error ocurred: (0xE8003FFE)"
Even after reboot of my iPhone, an update of iTunes and a second try could not avoid this error.
I think that this is a severe problem, because I'm using some apps for my buiness.
I'm also looking for a solution for this problem. Is there anybody who can help?
Regards and thanks in advance

Can Bridge not read / see the Finder's color labels...?

I have got a whole stack of images files, in a few nested folders on my Mac, and they have all been painstakingly individually color-labelled in the Finder with various colors.
I now want to manage these files and perform various actions on them, based on their colors, and so I have opened up the folders in Bridge, but Bridge is not showing the colors of the files.
I know Bridge has its own color-labels set-up, but this does not work in conjunction with the Finder, so even if I went through and re-labelled them all in Bridge, the changes would not be reflected in the Finder -- and I do still need to view the color-labels outside of Bridge / in the Finder, because I won't ONLY be using these files from within Bridge.
So, simply put, is there no way I can get Bridge to read and display the color-label information as shown in the Finder?

So, simply put, is there no way I can get Bridge to read and display the
color-label information as shown in the Finder?
No, you can't see those finder labels in Bridge.
There is however a reasonable simply workaround I would think.
In Finder create several new folders, for each label one folder.
Open another Finder window and put this in column mode. Use view options in
Finder and add the column 'label' to the window. Now press on the name label
at top of this column and your labels are selected per color above each
other.
Drag and drop them manual to the new created folders. And you can easily
repeat this for the other nested folders.
You can also add the new color label folders temporally to the favorite
column left at the finder window so drag and drop is even more easier.
After this in Bridge point to each folder and assign a suitable bridge label
color to it. Now you can work with Bridge color labels
Also in Bridge you have options to rate with stars and add keywords so
filtering has dozens of ways to retrieve your grouped files at once using
the filter panel.

ILife crayons seem not to match the html hex color codes?

Similar Messages

Maybe you are looking for