ILife Installation on 10.5 Server
Ok, I searched and it seems this is possible with 10.5 server (or there are some comments that indicate people have done this). In the past, the iLife install checked for the OS version and would not install on Server products without a little "hacking" .
I am looking to upgrade a machine to Server but I am still going to use it as a primary machine until I can replace it. So I need the ability to install iLife.
Can someone answer if iLife 08 can be installed on 10.5 server and if so did it require any hacks like the following link showed for previous versions?
http://www.macosxhints.com/article.php?story=20040117235423466
Thanks!
Chris
I think you have a more awesome answer if you partition your hard drive. Since Disk Utility can repartition on the fly without nuking existing data, resize your main 10.5 client partition with iLife installed so that you have say 30 or 40 GB left over. Then use that to create a new partition and install Server on it. That way you can install whatever you want on the client part without worrying about compatibility and you have a seperate server partition that you can practice and mess around with and if you accidentally screw it up, you haven't crippled your main machine and all it's settings, email, etc.
Jeff
Similar Messages
-
11.2.0.2 Grid Installation for a Standalone Server FAILED!
OS: OEL-5.5 x86_64 (kernel-2.6.18-194.17.4.0.1.el5, glibc-2.5-49.el5_5.7)
Product: Oracle 11gR2 (11.2.0.2.0) x86_64 for Linux
Hi,
I was trying to perform a clean and full 11.2.0.2 installation for a Standalone Server (Single database + ASM + Restart), but unlike 11.2.0.1, this standalone patch, shipped as set of full installation files, has serious flaws mainly due to insane installation and configuration scripts. My environment is as follows:
ORACLE_BASE=/opt/oracle
ORACLE_HOME=/opt/oracle/product/11.2.0/db_1
GRID_HOME=/opt/oracle/product/11.2.0/grid
all owned by oracle:dba. ASMLib was configured with four 256 GB partitions on four physical disks.
1. During grid installation the Prepare, Copy files, Link binaries, Setup files, Execute Root Scripts (root.sh), Update Inventory, Oracle Net Configuration Assistant all succeeded, but ASM Configuration Assistant FAILED and installation couldn't continue. That was because root.sh script (and inside it calling scripts) changed the ownership of ORACLE_BASE and GRID_HOME to root:dba, so that admin and diag directories creations in ORACLE_BASE were not permitted. After fixing that manually as root (immediately after executing root.sh), the installation continues and succeeds.
2. During installation of Client software the error message window appears stating that cannot find the /opt/oracle/product/11.2.0/db_1/oui/bin/runInstaller.var file. By pressing the Continue button the installation continues ignoring this.
3. If Oracle Scheduler Agent is selected for installation during Client software installation, the Oracle Enterprise Manager 11g Database Control Release 11.2.0.2.0 cannot start (https problem - cannot establish connection). To fix this, I had to deinstall Client software and install it again without Oracle Scheduler Agent.
4. The Performance window in Enterprise Manager 11g Database Control Release 11.2.0.2.0 cannot display any graph ("Initializing" and "Transferring data from localhost..." never end).
Are those issues known issues? If they are, why did Oracle ship that standalone patch without testing it before? Given that prior release (11.2.0.1) was free of any errors above, it is really beyond me to figure out this negligence.
NJAre those issues known issues? Have you created service request ? That would be much better to be sure about the workaround you found.
Nicolas. -
BPEL Server installation on JBOSS application Server on SUN SOLARIS
I have a question about Oracle BPEL installation. For our project exists the requirement, to install BPEL Server on SUN SOLARIS, whereby the appropriate Version of Application server JBOSS already exists and it should be used.
The version of the Oracle BPEL server for JBOSS, which we found on the Download side, is made available only with JBOSS (version 3.2.6) in a Package.
During the BPEL server installation this bound JBOSS server version is installed automatically, without giving selection. Is there a BPEL installation for JBOSS on SUN-SOLARIS, which can be installed at the already existing JBOSS server?Hi There,
Dis you get any good responces to your question ?
Thanks
[email protected] -
SQL Server 2008 R2 & 2008 R2 SP1 installation fails in Windows server 2012
Hi All,
I have a strange issue here. I have a Windows server 2012 VM where i want to deploy SQL 2008 R2 Enterprise edition.
When i Run the setup every thing goes fine and during the installation wizard i get this error " The Folder path Program files contains invalid characteristics. I get this error 3 - 4 times during the installation wizard and the installation fails.
Below is the screenshot for the same.
So i checked few articles regarding the compatibility issue and found the below article and upgraded my setup to SQL 2008 R2 SP1 using the below article.
http://blogs.msdn.com/b/petersad/archive/2011/07/13/how-to-slipstream-sql-server-2008-r2-and-a-sql-server-2008-r2-service-pack-1-sp1.aspx
Again i still see the same above errors and with that a new error related to a MOF File.
Below are the contents of the error logs. Can some one assist on this issue.
======================================================
Overall summary:
Final result: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server Setup.
Exit code (Decimal): -2068052692
Exit facility code: 1212
Exit error code: 1324
Exit message: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server Setup.
Start time: 2015-01-15 13:53:03
End time: 2015-01-15 14:04:29
Requested action: Install
Log with failure: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20150115_135043\Detail.txt
Exception help link: http%3a%2f%2fgo.microsoft.com%2ffwlink%3fLinkId%3d20476%26ProdName%3dMicrosoft%2bSQL%2bServer%26EvtSrc%3dsetup.rll%26EvtID%3d50000%26ProdVer%3d10.50.2500.0%26EvtType%3d0xA60E3551%400xD3BEBD98%401211%401
Machine Properties:
Machine name: ALPCLDSCOM01
Machine processor count: 4
OS version: Future Windows Version
OS service pack:
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered
Package properties:
Description: SQL Server Database Services 2008 R2
ProductName: SQL Server 2008 R2
Type: RTM
Version: 10
Installation location: D:\SQLServer2008R2_SP1\x64\setup\
Installation edition: ENTERPRISE
Slipstream: True
SP Level 1
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: False
AGTSVCACCOUNT: E2KLAB\SCOMAC
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Automatic
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASDOMAINGROUP: <empty>
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: *****
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Automatic
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20150115_135043\ConfigurationFile.ini
CUSOURCE:
ENABLERANU: False
ENU: True
ERRORREPORTING: False
FARMACCOUNT: <empty>
FARMADMINPORT: 0
FARMPASSWORD: *****
FEATURES: SQLENGINE,FULLTEXT,RS,SSMS,ADV_SSMS
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: NT AUTHORITY\LOCAL SERVICE
FTSVCPASSWORD: *****
HELP: False
INDICATEPROGRESS: False
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: MSSQLSERVER
INSTANCENAME: MSSQLSERVER
ISSVCACCOUNT: NT AUTHORITY\NetworkService
ISSVCPASSWORD: *****
ISSVCSTARTUPTYPE: Automatic
NPENABLED: 0
PASSPHRASE: *****
PCUSOURCE: D:\SQLServer2008R2_SP1\SP
PID: *****
QUIET: False
QUIETSIMPLE: False
ROLE: <empty>
RSINSTALLMODE: DefaultNativeMode
RSSVCACCOUNT: E2KLAB\SCOMAC
RSSVCPASSWORD: *****
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: E2KLAB\SCOMAC
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: E2KLAB\Gautamr,E2KLAB\SCOMAC,E2KLAB\SCOM Admins
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: False
TCPENABLED: 1
UIMODE: Normal
X86: False
Configuration file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20150115_135043\ConfigurationFile.ini
Detailed results:
Feature: Database Engine Services
Status: Failed: see logs for details
MSI status: Failed: see details below
MSI error code: 1324
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20150115_135043\BestPracticesPolicies_Cpu32_1.log
MSI error description: The folder path 'Program Files (x86)' contains an invalid character.
Configuration status: Passed
Feature: Full-Text Search
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Reporting Services
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Management Tools - Complete
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Management Tools - Basic
Status: Failed: see logs for details
MSI status: Failed: see details below
MSI error code: 1324
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20150115_135043\BestPracticesPolicies_Cpu32_1.log
MSI error description: The folder path 'Program Files (x86)' contains an invalid character.
MSI status: Failed: see details below
MSI error code: 1324
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20150115_135043\sql_common_core_loc_Cpu64_1033_1.log
MSI error description: The folder path 'Program Files' contains an invalid character.
Configuration status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20150115_135043\SystemConfigurationCheck_Report.htm
Gautam.75801Hi Alberto,
Still the same issue.
I installed the SQL 2008 R2 without SP1 and changed the service accounts to system account and repaired the .NET using the .NET Repair tool
Also changed the installation directory to D:\ Drive this time. Still same issue.
log file:
===============
Overall summary:
Final result: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server Setup.
Exit code (Decimal): -2068052692
Exit facility code: 1212
Exit error code: 1324
Exit message: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server Setup.
Start time: 2015-01-15 22:55:37
End time: 2015-01-15 23:07:32
Requested action: Install
Log with failure: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20150115_225416\SQLSysClrTypes_Cpu64_1.log
Exception help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=10.50.2500.0
Machine Properties:
Machine name: ALPCLDSCOM01
Machine processor count: 4
OS version: Future Windows Version
OS service pack:
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered
Package properties:
Description: SQL Server Database Services 2008 R2
ProductName: SQL Server 2008 R2
Type: RTM
Version: 10
SPLevel: 1
Installation location: D:\SQL Server 2008 R2 Datacenter edition for only Windows server 2008 R2\x64\setup\
Installation edition: ENTERPRISE
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: False
AGTSVCACCOUNT: NT AUTHORITY\SYSTEM
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Automatic
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASDOMAINGROUP: <empty>
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: *****
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Disabled
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20150115_225416\ConfigurationFile.ini
CUSOURCE:
ENABLERANU: False
ENU: True
ERRORREPORTING: False
FARMACCOUNT: <empty>
FARMADMINPORT: 0
FARMPASSWORD: *****
FEATURES: SQLENGINE,FULLTEXT,RS,SSMS,ADV_SSMS
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: NT AUTHORITY\LOCAL SERVICE
FTSVCPASSWORD: *****
HELP: False
INDICATEPROGRESS: False
INSTALLSHAREDDIR: D:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: D:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: D:\Program Files\Microsoft SQL Server\
INSTANCEID: MSSQLSERVER
INSTANCENAME: MSSQLSERVER
ISSVCACCOUNT: NT AUTHORITY\NetworkService
ISSVCPASSWORD: *****
ISSVCSTARTUPTYPE: Automatic
NPENABLED: 0
PASSPHRASE: *****
PCUSOURCE:
PID: *****
QUIET: False
QUIETSIMPLE: False
ROLE: <empty>
RSINSTALLMODE: DefaultNativeMode
RSSVCACCOUNT: NT AUTHORITY\SYSTEM
RSSVCPASSWORD: *****
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: NT AUTHORITY\SYSTEM
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: E2KLAB\Gautamr
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: False
TCPENABLED: 1
UIMODE: Normal
X86: False
Configuration file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20150115_225416\ConfigurationFile.ini
Detailed results:
Feature: Database Engine Services
Status: Failed: see logs for details
MSI status: Failed: see details below
MSI error code: 1324
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20150115_225416\BestPracticesPolicies_Cpu32_1.log
MSI error description: The folder path 'Program Files (x86)' contains an invalid character.
Configuration status: Passed
Feature: Full-Text Search
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Reporting Services
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Management Tools - Complete
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Management Tools - Basic
Status: Failed: see logs for details
MSI status: Failed: see details below
MSI error code: 1324
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20150115_225416\BestPracticesPolicies_Cpu32_1.log
MSI error description: The folder path 'Program Files (x86)' contains an invalid character.
Configuration status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20150115_225416\SystemConfigurationCheck_Report.htm
Any other suggestion i can try ?
Gautam.75801 -
Dialogue box requiring iLife Installer to replace missing files in iWeb?
My Intel iMac crashed the other day when installing a Kensington Trackball. Apple genius diagnosed and did an "archive and reinstall". Oddly, when I try to open iWeb, a dialogue box says ". certain files missing-install iLife installer". IPhoto won't respond at all. Itunes okay. Also my Adobe Photoshop (only) in my CS2 suite won't open. It seems all other apps are okay. Any idea where I find an "iLife installer"? I did try reinstalling the "bundled software only" package on the original discs with no difference.
Thanks for any help
Barney BuoyWelcome to the Apple Discussions. The archive and install removes critical files that those applications put in the system folders and are needed to run. The Photoshop missing item is a folder titled StartupScripts that is located in the HD/Library/Application Support folder.
Those for the iLife apps are more varied and it's best to reinstall them from the disk they came on. *Before installing be sure to delete any file with the name of the application you're installing that is in the HD/Library/Receipts folder* (they may be removed in the Archive and Install).
If you don't have a backup (i.e. Time Machine) of the StartupScripts folder you will have to reinstall Photoshop.
OT -
Problem with NW04s SR2 installation with MS SQL Server 2000 SP4
Im struggling with the NW04s installation with MS SQL Server 2000.
The installation stops at the step Create/modify database schema SAPJ2EDB.
The following error/info from log file,
INFO 2007-06-06 12:02:33 [iaxxgenimp.cpp:632]
showDialog()
Execute step doConfiguration of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|NW_MSS_SRVCFG|ind|ind|ind|ind|6|0.
INFO 2007-06-06 12:02:35 [iaxxgenimp.cpp:632]
showDialog()
Execute step doTempdb of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssDowntimeConfig|ind|ind|ind|ind|7|0.
INFO 2007-06-06 12:02:36 [iaxxgenimp.cpp:632]
showDialog()
Execute step doSwitch of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssDowntimeConfig|ind|ind|ind|ind|7|0.
INFO 2007-06-06 12:02:36 [iaxxgenimp.cpp:632]
showDialog()
Execute step doTempDBAnalyze of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssDowntimeConfig|ind|ind|ind|ind|7|0.
INFO 2007-06-06 12:02:37 [iaxxgenimp.cpp:632]
showDialog()
Execute step doTempDBBeforeRestart of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssDowntimeConfig|ind|ind|ind|ind|7|0.
INFO 2007-06-06 12:02:38 [iaxxgenimp.cpp:632]
showDialog()
Execute step doRestartServer of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssDowntimeConfig|ind|ind|ind|ind|7|0.
INFO 2007-06-06 12:02:58 [ianxbservi.cpp:697]
CIaNtServices::stop(const map<iastring,iastring>&)
The service 'MSSQLSERVER' stopped successfully on host 'GBCZ672C'.
INFO 2007-06-06 12:03:10 [ianxbservi.cpp:632]
CIaNtServices::start(const map<iastring,iastring>&)
The service 'MSSQLSERVER' started successfully on host 'GBCZ672C'.
INFO 2007-06-06 12:03:21 [ianxbservi.cpp:632]
CIaNtServices::start(const map<iastring,iastring>&)
The service 'SQLSERVERAGENT' started successfully on host 'GBCZ672C'.
INFO 2007-06-06 12:03:21 [iaxxgenimp.cpp:632]
showDialog()
Execute step doTempDBAfterRestart of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssDowntimeConfig|ind|ind|ind|ind|7|0.
INFO 2007-06-06 12:03:22 [iaxxgenimp.cpp:632]
showDialog()
Execute step doChangeTempSetNewSize of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssDowntimeConfig|ind|ind|ind|ind|7|0.
INFO 2007-06-06 12:03:39 [iaxxgenimp.cpp:632]
showDialog()
Execute step CheckParameters of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssSchemaCreate|ind|ind|ind|ind|9|0.
INFO 2007-06-06 12:03:39 [iaxxgenimp.cpp:632]
showDialog()
Execute step CreateDirectories of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssSchemaCreate|ind|ind|ind|ind|9|0.
INFO 2007-06-06 12:03:40 [iaxxgenimp.cpp:632]
showDialog()
Execute step CreateDatabase of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssSchemaCreate|ind|ind|ind|ind|9|0.
ERROR 2007-06-06 12:03:40 [iaxxgenimp.cpp:731]
showDialog()
FCO-00011 The step CreateDatabase with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssSchemaCreate|ind|ind|ind|ind|9|0|CreateDatabase was executed with status ERROR .
ERROR 2007-06-06 12:03:40
lib=iamodmssql module=CIaNtMssDmo
MDB-05053 Errors when executing sql command: <p nr="0"/> If this message is displayed as a warning - it can be ignored. If this is an error - call your SAP support.
INFO 2007-06-06 12:04:04 [iaxxgenimp.cpp:774]
showDialog()
An error occured and the user decided to retry the current step: "|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssSchemaCreate|ind|ind|ind|ind|9|0|CreateDatabase".
ERROR 2007-06-06 12:04:05 [iaxxgenimp.cpp:731]
showDialog()
FCO-00011 The step CreateDatabase with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssSchemaCreate|ind|ind|ind|ind|9|0|CreateDatabase was executed with status ERROR .
Please let me know if you can help or if there is any other way around.
Many Thanks in advance.
Ritin JainHi All,
I was not able to solve the problem with MS SQL 2000, but I was able to resolve the issue with MS SQL 2005.
You have to chhose the following settings while instalation,
Service Account - Select one of the following options:
1) Use the built-in System account for each service and choose Local system or Network Service.
2) Use a domain user account, and enter the user name and password.
Under Start services at the end of setup make sure that SQL Server and SQL Server Agent are selected.
Authentication Mode
1) Select Mixed Mode (Windows Authentication and SQL Server Authentication).
This mode is required for a Java or ABAP+Java system.
If you choose this mode, you have to set the password for the sa login.
Note: The password for the sa login must comply with the Windows password policy.
Collation Settings
1) Select SQL collations (used for compatibility with previous versions of SQL Server).
2) From the drop-down list select Binary order based on code point comparison, for use with the 850 (Multilingual) Character Set.
I hope this helps! -
PVM Installation Problem (install report server)
Hi,
i am trying to install PVM 1.0.2 , but i have the following error:
Installing Report Server:
ERROR: Failed to install report server as user pvmadm. Please check OS
user configuration then try again.
I add pvmadm to root group,except dba group, but i have the same problem.
Any ideas ?
TIAHello,
The installation of a Reports Server as a "Windows Service" is no more possible in Oracle Reports 10g R2 :
http://download-uk.oracle.com/docs/cd/B14099_17/bi.1012/b14048/pbr_strt.htm#i1005629
Start the reports server with the command :
rwsrver server=<server_name> batch=yes
or use opmn to manage the reports server .
Regards -
ERP ECC 6.0 Cluster Installation under MS SQL Server 2005
Hi,
anybody in the world did a ECC 6.0 Cluster installation under MS SQL Server 2005 database?
Can anyone please share some usefull documents to understand... This is new to me and doing it for first time.
Pls help
RGCHi,
I'm looking for a customized document for ECC installation (how to document) and not a SAP Standard one as i'm new to cluster. Please share if any.
How to configure the nodes in three tier architecture?
In which node the DB should be installed?
In which node the CI should be installed?
How to configure Central Point of Failure (CPOF)?
How the ECC 6.0 cluster works and how to distribute the resources (SAP) across nodes?
What are the resources that needed for failover from one node to another?
Expecting help.
rgds
RGC -
OBIEE 11.1.1.5 Installation guide on windows server 2008
HI
I need to install OBIEE 11.1.1.5 on windows server 2008.Please let me know the prerequisites for windows server 2008.
I was successfuly installed this on Windows Xp and 2007.But i was failed to installed it on Windows server 2003 SP2.
Share me the step by step installation guide for windows server 2008 with prerequisites.
Regards,
DineyI was successfully installed this on Windows 2008 R2 x64.
FYI. -
Error during installation of Microsoft SQL Server 2005
Hello All,
During installation of Microsoft SQL Server 2005 I have got the below error message
"There was an unexpected failure during the setup wizard"
From this link http://support.microsoft.com/kb/916760 i came to know that this error occurs just because I used SQL Server 2005 installations from a folder on a network share.
After that i unstall everything & copy the installations in a local drive. But again when we restart the activity we got the same error message & the installation completed.
Any hint why this happens..
Thank You.
Kind Regards,
JitudaHello Jituda,
I think we need to focus on the error in the setup log first.
Error: Action "InvokeSqlSetupDllAction" threw an exception during execution. Error information reported during run:
Source File Name: datastore\cachedpropertycollection.cpp
you might be able to see more detailed error information in the log.
You may check if the following links help:
http://www.sqlserverfaq.net/2008/12/17/sql-server-2005-setup-failing-to-install-on-cluster-with-unexpected-failure-while-performing-the-scc-checks/
http://social.msdn.microsoft.com/Forums/en-US/sqlsetupandupgrade/thread/f998b073-4378-4d02-95ac-c9afb31c7a60
In addition, to clarify, the SQL4SAP.VBS script does not support Microsoft Cluster Service (MSCS). If you want to run the
script in an MSCS configuration, you get an error message. In MSCS configuration need to install the SQL Server database software manually instead of using the script. Please see the corresponding SAP product installation guide under http://service.sap.com/instguides
Kind regards,
Qingqing Wang -
Which is the software needed for an installation on a production server
Hi,
which is the software needed for an installation on a production server (windows 2008) of Forms/Reports 11g ?
I mean the old 10g stand alone forms and report service but un 11g release ..
RegardsFor application deployments (production), you will need the following software. The same is true for a design-time environment.
1. Weblogic Server 10.3.2
2. Fusion Middleware 11.1.1.2
See my update in the following:
Re: Some FORMS quesion...
All products are contained within the Fusion Middleware (Forms, Reports, Portal, Discoverer) distribution. This includes Builders, Runtime components, HTTP Server, Web Cache, etc. During the installation process, you choose which you want to install. -
ILife Installer Has iPhoto Grayed Out
I tried to install iLife 05 on my iBook G3. iMovie HD and Garageband installed okay, but iPhoto was grayed out and I could not select it for installation. The machine satisfies the requirements. What would cause the iLife installer to gray out iPhoto like that?
I tried to install iLife 05 on my iBook G3. iMovie HD and Garageband installed okay, but iPhoto was grayed out and I could not select it for installation. The machine satisfies the requirements. What would cause the iLife installer to gray out iPhoto like that?
-
Two DB2 software installation on the same server
Hello,
Do you know if it is possible to have two separate DB2 software installations on the same server (OS is AIX)?
Thanks,
FlorinHello Florin,
On V8 there is the possibility to use different FixPak levels when using the Alternate FixPaks provided by IBM.
SAP allowes you to use the Alternate FixPaks in your test environment, but NOT in production.
Here is the remark from OSS note 101809:
Remarks on "alternate FixPaks"
o DB2 Enterprise Server Edition (ESE) Version 8.1 for UNIX-based operating systems now supports the coexistence of multiple FixPak levels on the same system through the use of "alternate" FixPaks.
o On details on this feature please refer to official IBM Web sites.
o "Alternate FixPaks" are not supported by SAP. Their use should be restricted to testing purposes.
This is the link to IBM's website:
http://www-1.ibm.com/support/docview.wss?rs=71&context=SSEPGG&dc=D600&uid=swg21112119&loc=en_US&cs=UTF-8&lang=enclass=
Please keep in mind that if SAP requires a special build for a certain FixPak there would be no Alternate FixPak which contains the same fixes and therefore you cannot use it at all. OSS note 101809 contains the necessary FixPak information.
Regards,
Joachim -
Error during installation when add HA server to UCCX
Hello all,
I am having issues adding an HA server to a UCCX cluster. During the installation of the HA server i get the following error
"Configuration validation with uccxsvr01 failed Configured first node uccxsvr01 is not a first node -is uccxsvr01 entered correctly?
-is uccxsvr01 the correct first node for this node"
I have verified the security password, ip address of node 1, hostname of node1
I have rebooted as well.
The server is licensed for HA
the HA server is listed under System and servers in Node 1
Anyone ever run into this?
We are running UCCX 10.6.1.10000-39Hi kwaldecker@netd...,
ok.
If you open the RTMT, is there any alert in Node 1?
If there is no alert, are you able to make the test bellow?
a) Backup Node 1.
b) Shut down Node 1 (it's just a 'Power off' of the VM)
c) Install a new UCCX in your VM with the same hostname/IP Addr of Node 1.
d) Install Node 2.
Note: if you are able to install Node 2 ... Restore the backup in the 'New Node 1' and install Node 2 again.
Regards. -
Has the ODI same installable for both Client & Server?
Has the ODI same installable for both Client & Server?
i.e. Team with multiple developers is concurrently working on ODI project. Repository is very much same. They just need the Designer Module in their desktop.
Is there separate installable for development IDE for ODI (Designer Module) instead of complete ODI which may include the server also?
Thanks In Advance
priyadarshi.Hi ,
You can install only the client in multiple machine if multiple user are going use/share the same repository ... and you should be having the same
snps_login_work.xml
snps_login_security.xml
in all your client installations....so that you can have multiple users created and share the same repositroy ...
hope this helps
Thanks
Ananda
Maybe you are looking for
-
Issue at VL10B (STO)
Hi, While processing STO, I am done with the step ME21N Purchase order and i was able to generate the Order no. and processing further at step VL10B the particular document which was generated in earlier step was not able to view. I also found that i
-
What do i do, because that really is annoying me.
I wanted to watch a movie in bed on my new macbook pro with retina display but then i realized it didnt have the slot in the side that the disc goes in. What do i do becuase this is really annoying me.
-
I need to create an index organized "mean and lean" table with very high cardinality (~ 1B recs). The table will consist of 1 or 2 columns of type NUMBER, plus a foreign key generated by a sequence. I need a "mean and lean" data type to use for the f
-
Migrated and now 2 computers with same computer name?(user account)
I used the Migration Assistant to move info from iBook to my MacBook. I don't know how but now on my MacBook I have a copy of my user account from my iBook. Now, I have two user accounts on my MacBook, the original user account created when I started
-
trying to buy more storage on the cloud, response is 'there was a problem - try again later' its been doing this over the last two hours - any ideas what the 'problem' is please (assuming its not me) - thanks