Ill not boot. just had new motherboard (or whatever mac call it) and RAM fitted and still U/s

17inch Macbook pro has just had new motherboard (or whatever mac call it) fitted and RAM replaced at great expense and still useless. Will not boot. tried booting in safe - with shift held - no joy. Any suggestions?

Your solution lies with who ever repaired the MBP.  Based on what you are describing, the repair is unsatisfactory so bring it back.
Ciao.

Similar Messages

  • I just upgraded to the New OS on my Mac Book Pro and now my trackpad does not zoom in or out.  I looked at system settings on trackpad and it is set, but does not work How do I get it started?

    I just upgraded to the New OS on my Mac Book Pro and now my trackpad does not zoom in or out.  I looked at system settings on trackpad and it is set, but does not work How do I get it started?

    This is really unfortunate. I'm sorry that nothing works. I was going to mention holding down the power button and doing a force shutdown but you already did that. You might need to take it into the Apple store. I don't know if booting into safe mode would help. You would have to turn off the machine again, hit the start button and hold down the shift key after you hear the tone, but normally you would let go of the shift key when you see the apple logo and spining wheel. Maybe by holding down the shift key after you here the tone will cause the screen to come back on? The other option is to start up from the 'install disk' if your machine came with one. You would insert the disk, then shut down the computer, and hold down the C key right after hitting the start button.
    Here's the link for the safeboot
    http://support.apple.com/kb/HT1564?viewlocale=nl_nl

  • I just had major issues with my Mac and had to get a new logic board. When I got the computer back and tried to reinstall Photoshop- it says error 6. What do I do?

    I just had major issues with my Mac and had to get a new logic board. When I got the computer back and tried to reinstall Photoshop- it says error 6. What do I do? It is impossible to get any phone number for adobe.

    Try these solutions: Error "Licensing has stopped working" | Mac OS

  • Just had new downloads, now itunes has stopped working ?

    Just had new download. now itunes has stopped working ?

    I have been dealing with this since Sunday and have done everything. Temove, repair, reinstall, blah blah blah. I hope you have better luck that I am having. Apple wants me to pay for a solution. Their software caused the problem and I have to pay. Outside of that, no answered email or anything. Apple support is a joke. I'll never buy another Apple product again.

  • My MacBook Core 2 Duo will not boot up.  In safe mode I see keychain problems and Mach 1102.

    My MacBook Core 2 Duo will not boot up.  In safe mode I see keychain problems and Mach 1102 and it keeps circling through the same error.  Also the screen is so faint (pressing the F1 and F2 keys don't do anything).   I got this from a friend and he didn't have any of the original discs.  Any suggestions?  From what I've read it's a problem with a recent update.  I've never had a Mac so I'm trying to learn and fix it. 

    I just had an issue like this. I was able to boot up with an external firewire drive, although it was a lot of trouble. I think doing an option boot finally worked; holding down the option key, I eventually got to see the firewire drive was bootable, and booted from it.
    I put the thing in verbose boot mode (command - v , I think; but please look it up. I have no Mac books at work to check). In verbose mode, you could see that the hard drive could not mount; the OS tried to do fsck, but it failed around 2/3 of the way, and the CPU was halted.
    I was occasionally able to boot normally, but never in safe or single user modes; these do a disk test first, which invariably failed.
    I could see from the system and console logs when I managed to get the firewire boot going that there were repeated errors trying to access drive s03, the internal SATA drive. The logs on the SATA drive showed huges numbers of errors. At a wild guess, for some reason a lot of sectors went bad all at once. There had been a some erratic behavior before, but I'd put that down to the single processor G5 problems. (these were non video related, just freezes).
    Applecare wanted me to carry the huge thing into the local Apple store, but I persuaded them to just send me a replacment hard drive, which they did. The new one works perfectly.
    PowerMac G5 1.8 SP (late 2004), 1.42 mhz 14 iBook   Mac OS X (10.4.3)   both with 1.5 GB Ram

  • Since the new iTunes update 11.3, right after that I couldn't connect my iPod nano 7th G to iTunes. It kept showing me that it couldn't find my ipod, that I had to reinstall iTunes. I did that and still. And now I can't connect my iPhone 5

    Since the new iTunes update 11.3, right after that I couldn't connect my iPod nano 7th G to iTunes. It kept showing me that it couldn't find my ipod, that I had to reinstall iTunes. I did that and still. And now I can't connect my iPhone 5 to iTunes to sync my music. Can anyone please help me ?

    Hey zoelevi_13,
    Here is an article that will help you troubleshoot this issue with your devices not being recognized by your computer:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Take care, and thanks for visiting the Apple Support Communities.
    Cheers,
    Braden

  • MacBook pro will not boot. I get the gray screen, an apple icon and spinning wheel. Tried to start in safe mode but get the same screen. The only thing different was that I loaded the zedge sync app yesterday. Now getting this problem.

    Macbook pro will not boot. I get the gray screen, an apple icon and spinning wheel. I tried to start in safe mode, but get this same screen. The only thing different is that I added the zedge update app to do a sync for adding ringtones to my apple cell phone. How can I get a good boot. I am fairly new to apple computer.

    Reset PRAM: http://support.apple.com/kb/PH4405 and then try a normal boot.
    Run the Startup Manager to select Startup disk:  http://support.apple.com/kb/HT1310
    If those did not work your disk may be sick or dying.  The top priority at this point is to make a backup copy of your data.
    Check the health of the disk.  Boot in Recovery Mode (Boot, Command-R).  Run Disk Utility.  Click on the upper left disk icon.  Does the S.M.A.R.T. status say “Verified”?  If not the disk/SSD is unhealthy and needs to be replaced.  Even if it does not show “Verified” you can still attempt a backup. 
    Click on the icon indented below, usually called “Macintosh HD” and Verify Disk.  If it finishes with a green “OK” message then all is well with the disk.  If it shows errors in red then you have found a problem to address once the system is backed up.  Do not attempt software repairs until you have secured the data.
    If the disk will not show up at all in Disk Utility as your ran the tests above then it may be dead or it may have a bad internal SATA cable.  A trip to an Apple store for confirmation would be in order.
    If you have an external disk drive you can use as a backup drive then do so.  If not Google “Hitachi USB 3.0 external hard drive 1TB” to purchase one or go to a brick-and-mortar store (including an Apple store) to pickup one.  Any 1 TB external drive will do.
    Assuming it is still breathing you can try to recover the data without booting from the sick disk. 
    Reformat the external disk.  (This will erase all data on the external disk.)
    Boot in Recovery Mode.  Start Disk Utility.  Plug in the new disk.  Select it’s disk Icon (the second one down, left justified). Select the Partition tab.
    Partition Layout > Single Partition
    Name: Emergency Recovery 1 (or whatever name you wish to use)
    Format: Mac OS Extended (journaled)
    Options… > GUID Partition Table > OK
    Apply
    Select the Restore tab.
    Drag the old system volume (Macintosh HD) to Source.
    Drag the new disk volume (Emergency Recovery 1) to Destination.
    Click on Restore.
    It may take a long time for the backup.
    If that will not complete post back for other emergency data recovery methods, including those from a brody.
    If the backup succeeds, use the First Aid tab in Disk Utility to select the old volume (Macintosh HD) and Repair Disk.  If it does not finish with a green OK message try to repair it once or twice more.  If it repairs with a green OK message, will it boot normally?  If not, boot from the Recovery Partition and reinstall OS X.
    If it is still not healthy, post back for further instructions.

  • Trying to import photos and copy as DNG. Nothing will upload though. Permissions are all accurate, saving to the right profile, etc. Nothing has changed on my computer but it will not let me import new pictures. Also, updated the software and some images

    trying to import photos and copy as DNG. Nothing will upload though. Permissions are all accurate, saving to the right profile, etc. Nothing has changed on my computer but it will not let me import new pictures. Also, updated the software and some images say "preview cannot be seen" and some don't. And when I try to import and I hit "new photos" it's all the photos on my card. My brain is about to explode.

    It said something similar where the thumbnails were supposed to be.
    Just got the newest edition of LR, 4.4
    4.4 is not the newest edition of LR
    We don't want to know that it said "something similar", we want to know the exact wording. In fact, you ought to state the exact problem you are having, in detail, instead of saying you are having the same problem.

  • Have an older 17 MacBook Pro, running OS 10.5.8. Software update says everyting is current. Just bought new iPhone 5S. Mac won't recognize phone, says I need newer version of iTunes. Have no problem with computer recognizing old phone or iPad.

    Have an older 17 MacBook Pro, running OS 10.5.8. Software update says everyting is current. Mac doesn't have iCloud, preferences still shows MobileMe. Just bought new iPhone 5S. Mac won't recognize phone, says I need newer version of iTunes. Have no problem with computer recognizing old phone 3 or 1-1/2 year old iPad. I suspect I need to update OS, but as software update isn't telling me to do so, can I? What version would I need to go to?

    Your MacBook Pro can be updated to run Mac OS X "Snow Leopard". Buy it. That will enable you to run the latest iTunes version.
    Online (US): http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
    Online (UK): http://store.apple.com/uk/product/MC573/mac-os-x-106-snow-leopard
    Germany: http://store.apple.com/de/product/MC573/mac-os-x-106-snow-leopard
    Elsewhere: call the phone number in the Apple Online Store
    Apple's price is $19.99, £14.00, €18.

  • Just purchased new ipad.  screen in foreign language and says "Dand dat Ngon ngu.   What's that all about?

    Just purchased new ipad.  screen in foreign language and says "Dang dat Ngon ngu?   What's going on??

    The easiest AND quickest way would be to reset the iPad and start over.
      Reset all settings 
      Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. 

  • Just bought new AirPort Extreme did everything on manual and light still flashing amber , it is connected to an Arris TM822 from optimum cable company , help please

    Just bought new AirPort Extreme did everything on manual and light still flashing amber , it is connected to an Arris TM822 from optimum cable company , help please

    Any luck with the suggestions mentioned by Bob Timmons?
    I am having pretty much the same issue.
    Got a new modem Arris SB6141 and a new Airport Extreme ME918LL/A. Activated with my ISP (Comcast). Worked with a savy tech who knew the modem and Airport Extreme. Ensured all items were correct from the ISP side.
    I follow the instructions as indicated for Airport Extreme by it fails to detect the internet and dns servers. Comcast suggested I call apple. Reading posts above I will:
    -Reset the airport extreme
    -Unplug the modem for 30min
    Airport Utility 6.3.4 (634.17)
    Airport Extreme ME918LL/A Firmware Version 7.7.3
    MBP - Yosemite Mid 2012
    Appreciate the assistance folks.

  • I was away for 3 weeks and just got back. Put my Mac on charge and after 4 hours it still won't come on. Help!!!

    I was away for 3 weeks and just got back. Put my Mac on charge and after 4 hours it still won't come on. Help

    Rachg wrote:
    Had turned off all power supply incase a socket blew. (happened before) so my mbp was on sleep
    You should have turned your MBP off!  Keeping it on sleep w/o use for 3 weeks makes no sense.  As others have already stated, you will need to take your comp to a repair shop.  More than likely you need a new battery.

  • I can't get my new Macbook to allow me to sync and still keep my phones existing iTunes library. Even though it is the same account it doesn't seem to recognise that my Apple ID is the same

    I can't get my new Macbook to allow me to sync and still keep my phones existing iTunes library. Even though it is the same account it doesn't seem to recognise that my Apple ID is the same

    If youre like me, I have so many Apple devices, I always move things over manually rather than remember what to sync and what not to sync........ There’s an option to UNCHECK sync on any device if that helps you in ITUNES.
    On any device, like your phone, in ITUNES you can check the option for manual vs. automatically sync.

  • I have tried a lot to find an app or some way in email to attach multiple of pdf files in one email. I could not find anything that sends multiple pdf file in one email and still keeping the file in simple pdf format for the recipient.

    I have tried a lot to find an app or some way in email to attach multiple of pdf files in one email. I could not find anything that sends multiple pdf file in one email and still keeping the file in simple pdf format for the recipient.

    I am not aware of a way except for photos that allows you to select multiple files in an email. I even checked settings in the Adobe Reader app, and it does not show that ability.

  • I've tried to set up a new user on a mac book pro and i restarted it to create the new account but now all i can get is a white screen with the apple logo and the loading symbol what can i do ?

    i've tried to set up a new user on a mac book pro and i restarted it to create the new account but now all i can get is a white screen with the apple logo and the loading symbol what can i do ?

    Look at this support article:
    http://support.apple.com/kb/ts2570
    Ciao.

Maybe you are looking for

  • Can SimpleDateFormat for BC4J be used in Jdev 10g?

    I recently migrated a struts/bc4j app from Jdev 9.0.3.4, we use SimpleDateFormat quite extensivly in Entity and View Objects, however the AttributeDefImple.getFormattedAttribute method is throwing the following exception: Error Message: JBO-29000: Un

  • Unable to see the file share content via UNC path

    I have run a cmd command to modify the NTFS permissions on a few home directories. That command has helped me to remove all from the ACL of shared folders; and add domain admins into it. I am an admin on that Windows server. Now, whenever I try to ac

  • Use of the card under Vis

    I've been doing a lot of reading about the changes that were made to how audio is processed under Vista as opposed to earlier versions of Windows and from what I understand, all audio decoding is done via software and the sound card does, well, essen

  • TES 6.1.0.x Multiple Client Managers

    Hello: I am trying to find out if there is anyone else using multiple client managers on a load balancer and if we could have a discussion regarding such a setup. We have this in our envrionment and it does work, however sometimes I see oddities with

  • How to create Action or event?

    Hello to everyone!!! I'm wondering, how can I give Action or Event to the buttons in this case? I know how to do like this: JButton button1 = new JButton ("Button1"); button1.addActionListener (new Action.....)But in this case: import java.awt.*; imp