"illegal angle situation" on single angle project

i'm trying to build and burn a DVD made from a TV broadcast, which only has a single angle. when i view it in the inspector i get the warning "illegal angle situation", and when i try to build i get a "track 1: missing marker for angle situation" error.
unless i have done something by accident there should only be one angle. i have only one track, though the track is made up of two mpeg files, one immediately after the other (different tv programmes).
please could someone let me know how i can fix this problem ? i'm resisting starting over again because i spent a couple of hours inserting chapter markers. (as far as i know there is no way to export these markers from Studio Pro ...)
any help or advice much appreciated. thanks !
mark

alex
thanks very much for your response - after magnifying the timeline i discovered a short clip on the V2 track at the same point i joined two assets on V1 - it must have gotten there by accident and i couldn't see it on the normal view of the track editor. now it's been deleted all seems well.
many thanks,
mark

Similar Messages

Advanced mixed-angle "illegal angle situation"...stumped!!

First off, I would like to thank in advance anyone who takes the time to read my detailed post and tries to help. I have read the posts on this topic before, but I have not been able to solve my problem.
In detail:
I am doing a project for a client, and part of this project involves a mixed-angle track. We shot several different camera angles of his car (two from within the car, one stable tripod shot as the car passed the camera coming towards you, one stable shot as the car passed driving away from you). There were four different angles shot, and one combined FCP shot showing all four simultaneously for a total of 5)
Step one-the angles:
Angle 1 (V1): From 01:00:00:00 to 01:01:02:22 (A FCP edited shot with all the clips sized down to about 40% of original size so all angles are visible simultaneously.)
Angle 2 (V2): From 01:00:00:00 to 01:01:02:22 (A shot of taken from the sunroof view of the car as it drives. This shot is the only one with the same length as Angle0)
Angle 3 (V3) From 01:00:03:01 to 01:00:51:25 (A shot taken from the passenger side as the car drives with the rear view mirror slightly in shot. As you see, this shot does NOT run the length of V1 or V2)
Angle 4 (V4) From 01:00:11:11 to 01:00:28:28 (A tripod shot taken from a specific spot on the road with "its back" to the car as it comes towards the camera, so the view is of the car as it is driving away)
Angle 5 (V5) From 01:00:27:17 to 01:00:50:22 (Another tripod still video shot taken from a different spot on the road facing the car as it comes towards the camera, so that the view of the car is an approaching view, and the car passes the camera.
Audio is a combined sound of all four events as they occur mixed togther to form one Dolby 2.0 ac3 stream at 192kbs.
All of these shots are synched up as they happened in real time, and in looking at the various FCP timecodes, you can see that the different video angles "weave" in and out of one another.
Some various markers were placed on the footage in synching it up (NOT chapter markers for this purpose..only timing) and those were left in the individual clips.
Step two-once the video was synched, a separate FCP sequence was created for each angle to be encoded for use in DVDSP4. I then placed Chapter markers-precisely accurate to the frame where EACH video event intersected another. (Example: Angle starts at 01:00:03:01 so I put chapter markers at this precise point on angle 1 and 2 as well) Chapter markers were placed on any and all intersections of beginnings or ends of the angles that weaved in and out of other angles. This was done so the GOP's would match for later transcoding.
Step three-transcoding with Compressor.
Exact setttings for first run..
Video-(apple preset) DVD: Best Quality 120 minutes - 4:3. The ONLY change made to the audio or video preset was checking the INCLUDE CHAPTER MARKERS ONLY box in the extras portion of the video encoders for all tracks so the encoding would ignore all markers but my chapter placements.
Audio-Dolby 2.0 preset within the blanket apple preset mentioned above.
Step four-Entry into DVDSP track for trial run.
Exact steps:
Dropped angle 1 into V1
Dropped angles 2-5 into V2-V5 in accordance to the chapter markers governing where these angles should be "sandwiched." No problems here...no error messages. Flawless. Everything going well to this point.
Step 5-Ctrl, Simulate Track...and...here it comes...
"Warning-Illegal angle situation. Only the main video angle will be simulated."
Step 6-Went to Apple Discussion boards. Saw the various posts regarding the maximum bit rate being lower than 7 just to be on the safe side, and VBR turned off to be absolutely safe.
Step 7-Re-transcode all video angles with one pass, non VBR, "include chapter markers only" checked, and max bit rate of 6.5-same audio file as orginal attempt. Dropped video angles again into the respective timing containers in DVDSP. Once again, we get "Warning-illegal angle situation. Only the main video angle will be simulated."
I am stumped. I have tried to describe my process up to this point as precisely as possible and am also on a strict deadline. The mixed-angle feature was a big selling feature for us to this client. I know and hope the answer to this issue is something simple.
Again, thank you in advance! These message boards have always been a great help because of the generosity of those in the Mac family!!
PowerMac Dual 2.5 Mac OS X (10.4.5) 2.5 Ghz Dual G5, 1GB Ram, 250GB, 400GB internal hard drives

Thank you all for your responses. Here are my several confusions, however.
As long as the GOP's line up, I was under the impression that a MIXED, (not a MULTI) angle project does NOT have to have clips of the same length. Or at least this is what I read in the Ramseier/Sitter Certified training book on DVDSP. This is pulled right from the book:
"About Alternate Angles
DVDSP lets you create two different types of alternate angle tracks:
Multi-angle tracks, in which each angle is exactly the same length as the main video stream.
Mixed-angle tracks, which include alternate video streams that are shorter in duration than the main video stream. Where there's a space in the mixed-angle stream, DVD players revert to the main video stream, which they play until the mixed angle appears again. Mixed angles save disc space for alternate angle streams that do not need to run the length of the entire track. Technically, all angles in the mixed-angle tracks must be sandwiched by markers-one marker at the front, and one marker at the back."
The frustration of this is that I have been successful with Multi-angle tracks. Because I am working with a DVD-5, I cannot afford the space to have ALL these angles run the length of the entire mixed angle clip that I mentioned above. Chapter markers were placed at all intersecting points to the frame, and "include chapter markers only" was checked so that the GOP's would line up precisely with one another.
The only thing I have not tried is compressing at the lowest possible CBR I can while trying to maintain the quality of this footage with minimal motion artifacts. As I said, this is footage of several angles of a car accelerating to the speed of 85mph...so I am also limited to how low I can compress because I will get nothing but blur after awhile. I will try to recompress with the lowest possible CBR as suggested.
This is such a small part in the perspective of the overall whole of this project for my client, but it is extremely important. Again, I appreciate all support and free-time you all have given, and any additional detailed suggestions are desperately welcomed!
Peace
PowerMac Dual 2.5 Mac OS X (10.4.5) 2.5 Ghz Dual G5, 1GB Ram, 250GB, 400GB internal hard drives
PowerMac Dual 2.5 Mac OS X (10.4.5) 2.5 Ghz Dual G5, 1GB Ram, 250GB, 400GB internal hard drives

Illegal angle situation without multiple angles

I have a project that worked fine last time I opened it (a few months ago). No multiple angles. It does have subtitles. Upon opening today when I simulate I get this error when clicking to open several of the video sequences: "Illegal angle situation. Only the main video angle will be simulated." Absolutely the only thing I've changed is I had to relink to some of the assets that I'd moved onto an external drive for archiving. My video tracks have stories, chapter markers, etc. so I really don't want to delete them and recreate. Any help?
PowerMac Dual G5 Mac OS X (10.3.9)

Are you using encoded media or .mov source files? Have you tried locating and removing the PAR files that DVDSP creates when you import footage?
Are you using compatible audio files?
Any information about all of these things will help narrow it down a bit, if Drew13's suggestion doesn't help.

"Illegal angle situation. Only the Main Video Angle will be simulated."

Hi y'all!
Trying to export my .mov out of DVD Studio pro and getting the message 'Illegal angle situation. Only the Main Video Angle will be simulated.' when I try to simulate. There's no video in the V2 track so guessing I need to fix up the GOP or angles, but I don't know where or what to change them to.
Project is an hour long, NTSC, 16:9, 29.97fps

Check your preferences for Track - check the Fix Invalid Markers on Build box. Should do the trick, though you may need to quit DVD SP and reopen to make sure the changes to preferences "stuck." It sounds like you are using only one video track and do not have multiple angles (video), audio or other extras, just a straight m2v and audio track. There are some other things that can cause the issue, like using VBR when using multiple video tracks. But see if this takes care of it.

Simulation error: "Warning - Illegal angle situation"

Hi there,
I've just produced a three camera edit in FCP and I'm now trying to cut to DVD in Studio Pro.
I keep getting hit with the same message when trying "simulator". I have 13 chapters..all of which come up with this error when I try to skip to them.
"Warning: Illegal angle situation. Only the Main Video Angle will be simulated".
I've gone back into FCP and deleted all references to the "angles". I've exported onto tape and then recaptured..put back on the timeline and exported again..reimported into DVD Studio and it still appears.
I'm running out of ideas. Can anyone please help me?
Thanks in advance.
Carol Ann

Hi there,
Thanks for all your efforts here guys.
I'd say the "angle" issue is resolved...but now when I import the asset into DVD SP and try to put on timeline I'm getting the following error...
"Or or more clips could not be added to stream.
Incompatible GOP Structure. Last Valid Time Code at 00:00:00:00
I have exported using compressor and opted for MPEG2 option. I chose CBR one pass and ensured GOP was set to "closed". I thought if it was "closed" then it wouldn't look for that in DVD Studio but it still seems to. I'm trying just about every setting in compressor that I can find and basically I'm going nuts trying ot work it out.
Please don't give up on me
Carol Ann

Illegal angle situation

Searched through and found one topic on this but it didn't seem to provide a solution to my issue.
Basic stuff. Making a 4:3 SD DVD with one button to play the movie. the movie properties are "MPEG-2 6.2Mbps 2-pass.m2v". I'm taking a button from buttons palette, linking it to the movie and when I run "Simulate" and click on the button i get the "Warning. Illegal angle situation. Only the main video angle will be simulated." Every time I click the button I get this.
Been using DVD Studio Pro since the beginning and I've never seen this warning before. Any ideas? there was a fix in another thread (deleting then relinking the movie), but it didn't help.
OS 10.6.4
2 x 3.2 GHz Quad Core Intel Xeon
12 GB memory
Thanks,
ROB

Got another question for you. Have you seen my baseball?
Got it, Shawn. Things work fine now. That was a real rookie mistake on my part. Thanks!

Illegal angle problem

I'm composing a DVD without a menu as I want it to play the audio and video right as the user inserts the disc. The simulation looked great. But when I hit the Burn button I got a warning telling me there was an "Illegal Angle Situation, only the main video angle will be simulated". To be honest this is the first I've ever seen this. I've looked through the new FCP Studio 2 documentation and have yet to find anything referring to an illegal video angle for anything. If anyone has any ideas about the solution to this I'd appreciate the help. Thanks a ton in advance!

What I did was export the footage edited in FCP6 to Compressor. When Compressor launched I chose the settings for DVD-Best Quality-90 minutes as this whole video won't last more than 10 minutes, tops. When the encoding was complete I launched DVD Studio Pro, created a new project, dragged the two files (Dolby Digital, MPEG-2) to the tracks folder in the Outline window. As I wanted to have this DVD play as soon as it's inserted I used the instructions for that found here:
http://docs.info.apple.com/article.html?artnum=93812
I simulated the DVD and everything looked great. Then when I tried to burn the DVD the whole thing went heathen. As this is my first DVD project using FCP Studio 2 I'm sure it's probably something simple. But again, any help you render is greatly appreciated. So thank you very much, Hal!
Lance

Illegal angle problem as I insert an Aiff file...?

I inserted an Aiff audio file but when I click on the button to play it, an error message appears "illegal angle situation. Only the main angle will be simulated."
OK.
On pressing OK, nothing happens.
Does DVDSP not like Aiffs?

Also, - I just converted it to an AC3 using Compressor and get the same error message. So it looks like its not an aiff issue as such?
The issue is, I think, the fact that I am inserting an audio file only with no associated video stream. I just want to play the audio with a blank screen.
V1 is empty.
Message was edited by: Bansaw

Warning Illegal Angle - Back to iDVD

Just upgraded from FCP3 to Studio 2 and tried to use DVD Studio Pro for the first time this morning and failed miserably. I created a 52 minute video yesterday in FCP then exported to Compressor. It was a simple video with NO audio (soccer scrimmage). Aside from the fact that both FCP and Compressor don't seem too stable (Activity Monitor showed some of their processes as not responding during the whole process), everything seemed to work OK. However, when trying to build a DVD with DVD Studio Pro, I kept getting the "Warning: Illegal Angle..." message when testing via simulation.
I finally gave up and went back to iDVD which worked fine. Are the studio tools so unstable as to be not usable for such simple tasks?
Granted - I know I have a whole new learning curve to climb, but my initial experience has been very frustrating. Any suggestions on solving the "illegal angle" problem? Is it an FCP, Compressor or DVD Studio app problem?

I finally gave up and went back to iDVD which worked fine. Are the studio tools so unstable as to be not usable for such simple tasks?
I've been using DVDSP for many years, since v1. I don't have any odd problems with the software; nothing that is not clearly a user error.
I've never seen "illegal angle" in the errors I've gotten but I'd strongly urge you to try DVDSP with a far more conventional project so you can learn how it works. Earlier versions came with some interesting and very helpful tutorials but I haven't bothered to even look for them for many ears. They may no longer be included.
bogiesan

Illegal angle prompt?

I get this error prompt when I import a jpeg for the slide show and go to simulate because I want to see if the button works for taking me to each slide.
"Illegal angle situation. Only the Main Video Angle will be simulated."
What does this mean? I don't see it in the Manual or in the Help section.

I asked this question because I'm making a slide presentation and i don't see any information on this issue when you're making a slide show. I hope someone can help me.

MS Project 2010 Server - How to move a single MS Project plan and SharePoint Project site from a PWA server to another PWA server (one at a time)

MS Project 2010 Server
How to move a single MS Project plan and it's SharePoint project site from a PWA server to another PWA server (one at a time)
I have 2 Project PWA servers, i know how to copy all the databases (Publishing, Draft, Reporting, archive, content) from one SQL server and copy it to the other PWA server so both server can be identical.
I need to only move a single project from a PWA server to another,
Moving the Project plan, actual time data, SharePoint site with all it's content
Is there a 3rd party tool that can be added on to the server to help me move single project plans? to different PWA servers?
-Isaack

Visit my friends at FluentPro and try FluentBooks
http://www.fluentpro.com/productsfluentbooks2013.html
they have a 2010 version also.
Hope that helps,
Thanks, Eric S. Pcubed

Auto-populate of SHELL_shellName_shell Upper form DE only functions in one single-instance project shell. The DE in the BP Upper Form needs to auto-populate in two separate single-instance shells. How can I get this DE to autopopulate in both?

The Unifier environment
contains two single-instance project shells, INF and PBS, and two multiple-instance child project shells, INFS and
PB. There is a single instance, non-workflow
business process, ‘Project Information’ that contains a data element in the
upper form definition, Project ID. The Project ID is set to auto-populate from the multi-instance “INFS”
project shell attribute, which is populated manually.
Issue: The auto-populate functionality for the
Project ID ‘Shell_shellName_shell’ data element within the single-instance
Project Information BP only functions within one of the shells, either
INFS or PB, but not both. The INF and INFS shells are currently deployed
to production, PB and PBS shell are not.
It is critical that Project ID ‘Shell_shellname_shell’ data element is populated correctly in the
Project Information upper form of both shells, INFS and PB,
because that data element is referenced by multiple business processes and
integrations.
The attribute form definitions for both single and multiple instance project shells are identical. The Project ID utilizes the same data
element ‘SHELL_shellName_shell’ as is defined in both shell attribute forms
(INFS and PB).
The data definition source is a Unifier system-level variable, SYS Shell
Name (String, 128, Text Box)
Potential Solutions:
1. Create a Project ID DE of another data type which can
be successfully auto-populated from either shell. Drawback: all BPs and integrations which
reference Shell_Shellname_shell will need to be rewritten.
2. Investigate converting the Project Information single-instance
to a multi-instance BP, and create a
separate instance for each single-instance shell type. Same Drawback as Option #1, but with additional
rework. Most likely Project Information
would have to be recreated as a new BP.
Not sure that this option would even work.
3. Create a separate Project Information BP for PB. Drawback: Two separate BPs for Project Information would
need to be created. All existing BPs
refer to Project Information, so this option could potentially invalidate the
ability to use the existing BPs in the PB shell.

Was it really necessary to post the whole API description?!?
Locale[] locales = Locale.ENGLISH();ENGLISH is not a method in class Locale, so do not add the braces "( );".
Also, the constant ENGLISH is not an array, but just a single Locale object.
You didn't say what your problem was. What do you want to achieve with your program and what is it that you don't understand?

Using a single source project in a multiuser shared storage environment

I wanted to get some opinions on wether or not some adobe experts feel there would be any negative issues or problems with this type of workflow.
having several cs5 machines all on a shared fibre san system. all machines access the same projects and source materials and have their own internal drive containing the media cache and database. Then creating a single standard project with a sequence and bins and a few normally used files in it.
Then every time someone wants to start a new project they would load this "workflow" project in and then save it out to a different drive with the new project name and start editing from there.
I am concerned that not creating a new project every time that there might be something going on in the background with metadata or media cache or something strange that could cause any problems with copying the same project every time?
thanks!

Thanks, I missed a little bit of clarification there. we do not use macs, all our machines are windows 7. (really wish the forums were seperated for mac and pc)
also we are not using a networked multiuser environment. there is one standard user account that is the same on every machine and always used.
the main issue is that each machine has fibrechannel access to the same 36TB raid array. It is divided up into 4 drive letters that all show up the same on each machine.
we have been working this way for quite awhile already. it works, any machine can load any project and work on it. I am just wondering if it could be causing any of the different strange random problems we see from time to time.
we are actually in the process of upgrading all our machines from cs4 to cs5.
on of the main issues we have had so far is cfa files. when you load a project on another machine it makes a new cfa file even though there was one there already and it incremements the file#. some dirs i will look and there will be 12 cfa files for one clip. we set all our machines to save next to original in prefs.
i think that issue might be resolved in cs5 though. we are still trying to get converted over.
will there ever be a time we could put the media cache and database on the same shared drive that all machines look at? or is it that way now in cs5? cs5.5?
we have file-level san sharing setup so all machines can read and write at the same time and read the same files without any conflicts.
thanks!

Chapters for multiple iMovie projects (movies) in a single iDVD project

I sent three iMovie '11 projects with chapter markers to Media Browser. I dragged each of the movies from the Media Browser into a single iDVD project. Dragging the first movie resulted in the creation of one button named "play movie" and one button named "scene selections". But dragging in the second and third movies resulted in only a "play movie" button for each movie--no "scene selections". Does iDVD not allow multiple movies to have sub-menus? Am I required to combine the three projects while still in iMovie (such that there is in effect only two levels possible, not three)? From the description of how to create a project in iDVD, I was under the impression that I could have three main buttons (Sydney, Matakohe, and Brisbane), and have each sporting chapters. It would change the organization substantially to have reduce the structure to only two levels. And I've seen nothing that says this cannot be done.
Message was edited by: Paul Bullen
Message was edited by: Paul Bullen

Thanks for your comments. It strikes me as exceedingly odd that a program that is made for creating projects out of multiple movies provides scene selections (chapters) for only the first movie added. I also find it odd that this little fact is not mentioned anywhere and that I am apparently the first person in history to want to have a sub-menu for each movie in a project. I have had many views on this discussion group and on the iMovie '11 discussion group, but yours is the only answer so far. Why does the manual or Help (for both iDVD and iMovie) not say "Oh, by the way, you can add all the movies you want, but don't expect to get any chapters for them" (it makes little sense to provide chapters for one movie, if you can't for the rest). And, in iMovie: "if you are planning to put more than one movie on a DVD, don't waste your time adding chapter markers. They can't be used in iDVD."
I have Toast Titanium 6. It's a pretty old version, but I was able to use it to use it for something recently. Thanks again.
Message was edited by: Paul Bullen
Message was edited by: Paul Bullen

Illegal Characters Newly found in RH8 Project

Hello,
I need some help. I opened my RH7 project in RH8 for the first time, and received error messages complaining of file names having illegal characters and I am unable to import ANYTHING (Master pages, images, HTML files, etc.) because the items have illegal characters.
Let me say that I've never had problems like this using RH7, in fact, I believe I initially created the project using RH6. In any case, I read a similar thread on this forum and decided that perhaps my Project Title and Project Name are invalid, since they both have apostrophes ("XX YY User's Guide"). So, I renamed them (using RH8, of course) to "XX YY User Guide" and now, things are VERY SCREWED UP. I've attached the dialog box that I now receive, it's cycling through every single topic in my project (~50 topics), and I'm getting tired of clicking OK.
Is there any quick fix for this problem, or do I need to just start anew?
Using: RH8, Windows XP.
Images/Topics/Master Pages: Names have underscores, but I believe those are legal; never had an issue before migrating to RH8. No spaces or other illegal characters.
Thank you...any help would be appreciated. I've never come across this problem before, even with the apostrophes in the Project Title/Name.

Hi there
In addition to what my esteemed colleague Peter offered, I'll add this.
The image shows that you have an apostrophe present. Perhaps try renaming things so the apostrophe isn't present?
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7 or 8 within the day - $24.95!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

"illegal angle situation" on single angle project

Similar Messages

Maybe you are looking for