Illegal dependency when trying to add used DC
Hey,
I want to create a UWL Connetcor and created a DC for that.But when I try to add the tc/bi/bp/uwlsda DC of EP_BUILDT compartment i got the error:
"Illegal dependency: Normal component .......... may not use build infrastructure component sap.com/tc/bi/bp/uwlsda
Any Idea to solve this issue ?
Thanks.
Regards,
André
Hi,
we have the same problem. Did you find out the solution ?
Similar Messages
-
When trying to add music to a slide show from my PC to TV through Apple Tv the photos are fine but I get an error message that says the music cannot be downloaded.
Because the location for each song in your library is on your hard drive. If the hard drive isn't there, how can iTunes play it?
You'll have to move/copy the music from your hard drive to your computer's hard drive.
Basically, EASIEST way to do all this, if you don't care about your play counts, etc...
-Delete EVERYTHING from iTunes, so that your library is now empty.
-Go to "Advanced" inside of the "Preferences" window, found in the "Edit" drop-down. You can also access Preferences by pressing Ctrl+, (Press Ctrl and the comma key)
-Change your iTunes Media Folder Location to something simple, but on your computer. I use C:/iTunes. Make sure "Keep iTunes Media Folder Organized" and "Copy files to...." are both checked. You can close Preferences now.
-Now, drag and drop your music from your hard drive into your iTunes library. iTunes will automatically add the music to your library, as you would expect, and also creates a copy of each file to place into that iTunes Media Folder you just created.
Shouldn't have any more problems... -
Class is not appearing in "Java Batch Job Class Search" when trying to add.
Hi,
I have oracle CC&B 2.3.1, with SDK 2.2.0.12. I am trying to create new java batch job class by copying an existing one and modifying it to be used with new Batch Control .
Steps are as follows:
1-Created file by copying the exiting file
CreateLatePaymentChargesProcess.java ; and only changing the name of the class:
public class CmCreateLatePaymentChargesProcess
extends CmCreateLatePaymentChargesProcess_Gen
File location :
D:\spl\ccb231\applycm\ssgc_patch\java\source\cm\ CmCreateLatePaymentChargesProcess.java
D:\spl\ccb231\applycm\ssgc_patch\java\source\cm\ CmCreateLatePaymentChargesProcess_Gen.java
2-Run ApplyCm build successfully , which generated these files:
D:\spl\ccb231\java\target\cm\com\splwg\ccb\domain\billing\batch\ CmCreateLatePaymentChargesProcess.class
D:\spl\ccb231\java\target\cm\com\splwg\ccb\domain\billing\batch\ CmCreateLatePaymentChargesProcess_Gen$1.class
D:\spl\ccb231\java\target\cm\com\splwg\ccb\domain\billing\batch\CmCreateLatePaymentChargesProcess_Gen$CmCreateLatePaymentChargesProcessWorker_Gen$ThreadParameters.class
D:\spl\ccb231\java\target\cm\com\splwg\ccb\domain\billing\batch\CmCreateLatePaymentChargesProcess_Gen$CmCreateLatePaymentChargesProcessWorker_Gen$ToDoProperties.class
D:\spl\ccb231\java\target\cm\com\splwg\ccb\domain\billing\batch\CmCreateLatePaymentChargesProcess_Gen$CmCreateLatePaymentChargesProcessWorker_Gen.class
D:\spl\ccb231\java\target\cm\com\splwg\ccb\domain\billing\batch\CmCreateLatePaymentChargesProcess_Gen$JobParameters.class
D:\spl\ccb231\java\target\cm\com\splwg\ccb\domain\billing\batch\CmCreateLatePaymentChargesProcess_Gen.class
All the above classes are part of CM.jar file
ContextManagedObjects.xml ; contains these information
<com.splwg.shared.environ.ContextManagedObjectData>;
<domainPackages/>
<lookupFieldClasses class="tree-map">
<no-comparator/>
</lookupFieldClasses>
<cobolAlgorithmInterfaceExtensions class="tree-map">
<no-comparator/>
</cobolAlgorithmInterfaceExtensions>
</com.splwg.shared.environ.ContextManagedObjectData>;
packageMetaInfo.xml was not created
Still the class is not appearing in "Java Batch Job Class Search" when trying to add a new program name referencing this java class.
I tried restarting the Tomcat application server, still not appearing.
Where did I go wrong about it?
Thanks
Edited by: cc&amp;amp;b-user on Jul 29, 2011 12:39 AM
Edited by: ccb-user on Aug 2, 2011 9:28 PM
Edited by: ccb-user on Aug 7, 2011 11:36 PMHi,
Did you copying the base file CreateLatePaymentChargesProcess.java?
I also create a new batch job which copying the CreateLatePaymentChargesProcess batch code the only difference in getBills() method query and inner class CreateLatePaymentChargesProcessWorker extend CmCreateLatePaymentChargesProcessWorker_Gen, instead of CreateLatePaymentChargesProcessWorker_Gen.
The batch is working fine in my end.
Thanks,
Atul Singh. -
Hi,
i am getting this error "The current user has insufficient permissions to perform this operation." when trying to add the Term store managed navigation like the following screen shot. i am the Farm
administrator and as well managed services account. also noticed, cannot delete the service application, saying you don't have enough permission to delete the db. but using this account i was able to do everything before in my environment. is anyone already
face this kind of error, so what will be the way to resolve this?
Appreciated!event though its a farm admin,It should provide the access to MMS.please find the below link for more details and the solution for the issue.
Go to SharePoint Central Administration Site –> Application Management –> [Service Applications] –> Manage service applications
2. Highlight the Managed Metadata Service that your web application is associated with. (Do not click on the link, just click somewhere else on that row to highlight it)
3. Click on Permissions button in the ribbon area.
4. Add the application pool account used by your web application and give it ‘full Access to Term Store’
5. Click OK.
http://expertsharepoint.blogspot.de/2014/08/managed-metadata-service-or-connection.html
Anil Avula[MCP,MCSE,MCSA,MCTS,MCITP,MCSM] See Me At: http://expertsharepoint.blogspot.de/ -
Ora 12154 error when trying to add a database to VS Server Explorer
Hi Everyone,
I get the Ora 12154 error when trying to add a database to VS Server Explorer.
How do I get around this problem.
The database service is running and I can connect to the database with pl/sql.
I can also tnsping the database and that is also ok.
Looks like a problem with the odp.net software.
I am running the 32 bit Oracle 11g on a Windows7 Home Premium 64 bit PC.
I am new to this stuff so please help me step by step.
Thanks.
EmadHi J. B.
I have a question related to this. After you told me about the //host:1521/database alias I tried it in a VB 2008 program and it worked and returned data. At least I know that it can be used in a VB program without issues. I just now need to be able to add a connection with the Server Explorer.
Anyway here is the VB coding I used. I'm new to this and still learning:
Imports Oracle.DataAccess.Client ' Visual Basic ODP.NET Oracle managed provider
Public Class Form1
' String to connect to the database.
Dim strConnectionString As String = _
"Data Source=//emad-pc:1521/emadeva;User ID=scott;Password=tiger;" '
' Associate the connection string with a connection object.
Dim objOracleConnection As New OracleConnection(strConnectionString)
' SQL query for returning data rows.
Dim strSqlQuery As String = _
"Select dname, deptno " & _
"From dept " & _
"Where deptno = 10" '
' Command object to make this query work.
Dim objOracleCommand As New OracleCommand(strSqlQuery, objOracleConnection)
Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
' Identify what type of command is being used.
objOracleCommand.CommandType = CommandType.Text
Try
objOracleConnection.Open()
' Set up a Data Reader and load it with data.
Dim objOracleDataReader As OracleDataReader = _
objOracleCommand.ExecuteReader()
objOracleDataReader.Read()
' Convert the department number to a string.
lblDepartmentNumberFromOracle.Text = _
CStr(objOracleDataReader.Item("deptno"))
Catch ex As Exception
MessageBox.Show(ex.Message, "Error")
End Try
End Sub
End Class
I still want to thank you for the help you are providing.
Truly,
Emad -
FRM-40735 Error when trying to add an employee as key member for a project
FRM-40735: ON Insert trigger raised unhandled exception ORA-06502 in PAXPREPR when trying to add an employee as key member for a project
Tried generating FND log messages to see if it shows any error messages but it didn't show any specific error.Error ORA-06502 says PL/SQL: numeric or value error.
The Error could be in the data already exist in the system for key members. If this Project was created using APIs, there are possibilities that some other character( i.e. next line chracter ) got entered in the column value which Form "PAXPREPR" is not able to fetch or update.
You can query the key member data from back-end to check if any data corruption is there. you may require data-fix to correct that.
AB -
Error: 0x80073701 when trying to add Print Services Role in Windows 2012 Standard
Hello,
I'm getting an error when trying to add Print Services role in Windows 2012 Standard. I'm getting the same error whether I use the GUI or from PowerShell.
This is a new server install.
The PowerShell error follows:
add-windowsfeature : The request to add or remove features on the specified server failed.
Installation of one or more roles, role services, or features failed.
The referenced assembly could not be found. Error: 0x80073701
At line:1 char:1
+ add-windowsfeature print-services
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidOperation: (@{Vhd=; Credent...Name=localhost}:PSObject) [Install-WindowsFeature],
Exception
+ FullyQualifiedErrorId : DISMAPI_Error__Failed_To_Enable_Updates,Microsoft.Windows.ServerManager.Commands.AddWind
owsFeatureCommand
Success Restart Needed Exit Code Feature Result
False No Failed {}
Any help with this issue will be greatly appreciated.Hi,
I think you should start with chkdsk C: /F and sfc /scannow.
Regards.
Vivian Wang -
When trying to add Facebook account to my iPhoto 11 (9.3.1) I get this error message "Facebook didn't recognize your email password combination". Email and passwords are correct. Problems are even with veryfication code which I am asked to use instead of password.
In the iPhoto preferences ==> accounts delete the account and re-enter it
Or
iMHO the better solution is to set mail as your email client in the iPhoto preferences
LN -
Error when trying to add a project to Subversion source control
When trying to add a project to source control from within the OPM 10 studio (File - Source Control - Add Project to Source Control), the following error occurs:
"There was a problem accessing the source control system, probably due to network or contention issues. A retry is recommended."
This has been tried with Subversion versions 1.6.2, 1.6.5 and 1.6.6, with local repositories and repositories on a Apache webserver.
Once the project has been added to a repository, by using TortoiseSVN for example, working with source control is no problem.
Does anyone have a clue what the problem (and a solution) might be?
Thanks,
Theo.Hi,
Davin mentioned:
This appears to be an issue with the source control integration. We are looking into it.I am using OPM 10.0.1.14
The OPM help on collaborating mentions:
Open a rulebase project from source control
To open an existing Oracle Policy Modeling project from a source control repository:
In Oracle Policy Modeling, select File | Source Control | Open Existing Project from Source Control. When I open the File menu I do not see the "Source Control" at all.
Is this caused by an installation error or part of the "issue with the source control integration" ?
Please let me know if I'm the only one experiencing this problem ....
Thankx,
Paul -
Fatal error when trying to add derived table
Hello,
I'm new at desiging a universe. I get the following a fatal error when trying to add a derived table to my universe:
1 processor x Family 15 Model 0 Stepping 0
Windows 2000 Workstation v5.1 build 2600 (S)
Physical Total/Avail: 2.097.151 Kb / 2.004.940 Kb
Temp directory C:\DOCUME1\xxxxxx\LOCALS1\Temp\ (1 Kb available)
'Unknown' video card
1280 x 768 in true color
(doesn't make sense to me)
I use an ODBC connection that connects to a MySQL database. When I test the connection it's fine.
I am trying to add a derived table because it seems that my universe cannot produce LEFT OUTER JOINS. I read somewhere that I should set my ansi92 parameter to YES instead of NO. But, everytime I re-open my universe, it sets itself automatically to NO again.
My utlimate goal is :
For example, list ALL the people, left join my table to their websites, but return ALL the people, even if they don't have a website.
I dont' understand, my join should be simple enough.
Anybody knows what could be causing all these restrictions ?
Thanks for you help.
Edited by: Sose Canadian on Feb 9, 2009 9:40 PMHi Sose,
In BusinessObjects (Universe) Designer, the outer join option in a join is not available and is dimmed when using a Generic ODBC connection.
Try Following Solutions:
Solution : 1
When using an ODBC connection the odbc.prm must be modified on the machine where BusinessObjects Designer is used.
Use the following steps to modify odbc.prm:
1. Locate odbc.prm in the following folder:
\Business Objects\Business Objects Enterprise 11\win32_x86\dataAccess\Connection Server\odbc
2. Open odbc.prm in a text editor and modify the parameter 'EXT_JOIN' so its value is 'YES' instead of 'NO'.The outer join option is now available in BusinessObjects Designer.
If the outer join option is still not available after following the steps above. open odbc.prm in a text editor and modify the parameter OUTERJOINS_GENERATION. Change its value from 'NO' to either 'ANSI92' or 'ODBC'.
Solution : 2
This can occur when user is using a non-database specific middleware such as generic ODBC. Generic ODBC allows creating a successful connection and universe, however will not allow the Outer Join option.
The syntax for outer joins is specific to each database and the Generic ODBC driver only lets you access standard common features of all ODBC data sources.
Ensure that you are using the database specific middleware to create the connection.
I Hope this Helpsu2026.
Thanksu2026.
Pratik -
Get the following error when trying to add a new user on Mac OS Server 10.5 - Error of type eDSSchemaError (-14142) on line 1235 of /SourceCache/WorkgroupManager/WorkgroupManager-421/PMMUGMainView.mm
How come Leopard let me use the WGM in standard mode?
While SA complains that it won't work in Standard Configuration, WGM does not. There is some fault in the logic of this for which I don't have an explanation.
If I want to get control on Dock, selection of Home folder, config of Proxy... which I think are basic things, do I really need the advanced mode?
If you wish to have complete control of all client settings, yes. There really is no disadvantage of using an Advanced configuration other than the learning curve.
So if I switch to advanced mode, there is good chance I won't get this error message anymore, right?
Yes. -
hi i am getting message that CANNOT GET MAIL THE CONNECTION TO THE SERVER FAILED when trying to add official mail to Exchange in IPHONE 5
Talk to your IT department...
Or if you're at University, talk to the computer team.
Most Uni's are using outlook.com as the server connection not mail.youruniversity.edu -
Labview crashes when trying to add CLIP
When trying to add component level IP into Labview FPGA the program crashes (non-gracefully) when performing the check syntax.
Steps to reproduce
Load Project (Happens with a new unsaved project as well).
Under FPGA Target (<Any Device>) -> Properties -> Component-Level IP
Select Create File
Add any VHDL file (also used the DemoClipAdder.vhd from the High-Throughput Example)
Choose User-defined IP
Check Syntax
As syntax is being checked, the following appears in the log :
Built simulation executable x.exe
Fuse Memory Usage: 136412 KB
Fuse CPU Usage: 468 ms
Labview hangs for a couple of seconds then crashes
Alternatively :
Load Project (Or create a new project)
Under FPGA Target (<Any Device>) -> New -> VI
In Block Diagram, add IP Integration Block
Save VI
Double click IP Block
Add Synthesis File -> DemoClipAdder.vhd
Check Syntax (Completes successfully in this flow)
Generate
The following is produced in the log:
Built simulation executable x.exe
Fuse Memory Usage: 136668 KB
Fuse CPU Usage: 421 ms
Labview Hangs for a couple of seconds then Crashes
I have tested this multiple times with multiple projects and FPGA devices with the same result every time.Hi ThatOtherGuy
I have followed the steps to try to reproduce your problem but I have not been able to reproduce the error. I used this link to create the file and used notepad to create the file.
The Check sintax is successful and I do not get any error.
Have you try to do this in a different computer?
Which operating system do you have?
Which version of LabVIEW and drivers are you using?
Regards
Esteban R. -
I receive "Database access denied" when trying to add component 4543BD
I receive "Database access denied" when trying to add component 4543BD to my schematic. This component was added from a previous version. I'm using Multisim version 12.0.0 Student edition.
Solved!
Go to Solution.Hi Diarra,
I checked my database and the 4543 is not in the Student Edition. If you opened a schematic that was created in a higher version such as the Educaiton Edition and copied the part to your database, when you place this part you will get the access denied message.
Attached is a schematic with the part, you can open it and build you circuit around it.
Tien P.
National Instruments
Attachments:
4543.ms12 62 KB -
I am not receiving the verification email when trying to add an email account
I am not receiving the verification email when trying to add an email account to facetime and iMessage. Is there something else I can do?
Hi,
I don't ever remember getting an email when Adding an account.
Apple seems to verify it some other way (a self test to see if it is valid ? an actual email ?)
I tried adding an older @mac.com account that is not a valid email (gained when MobileMe was the Apple service and the @Mac.com registration was used for iChat names).
I then tried to add a Yahoo one.
This got past the first part and said an email has been sent.
As you say this has never arrived.
( checked the web Site for Yahoo Mail as well as my Mail App.)
In each case I also checked the Spam and Junk folders in both places.
I then tried an iCloud ID.
(FaceTime seems to treat the Original Apple ID and the iCloud issued email as separate IDs)
I did not get and email (Although it said it was sent) I did get a Pop up for the FaceTime app asking if I wanted to add an email and a second for the actual email itself. (It turned out it added an @me.com email also issued by iCloud before the @icloud.com was issued.
This is much the way iMessages adds emails when you add the emails to an iPhone, the Mac version gets pop ups.
I recently had something similar in Messages that might be related.
In Messages 7 (Mountain Lion) it seemed it could be any Apple ID that was used.
In Messages 8 it seems this has to be an iCloud linked one.
The @mac.com one I used above could not be added to iMessages either when I tried it about two months ago.
It might be one I have removed the creating/Recovery email so that i could create another Apple ID.
The name continues to work in Messages as an AIM valid screen name but I could not add it as the iMessages account and got sent to iCloud to "register" it but ran into problems that I have not sorted out yet.
EDIT.
Checked the Apple ID site and the @mac.com email I used has no linked Alternative/recovery email.
8:29 pm Sunday; March 9, 2014
iMac 2.5Ghz i5 2011 (Mavericks 10.9)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
Couple of iPhones and an iPad
Message was edited by: Ralph Johns (UK)
Maybe you are looking for
-
Just to help people who have reported problems re-setting the N8, apparently there is a button combo to reset, Kudos to AAS http://www.allaboutsymbian.com/news/item/12185_Another_three_finger_salute_do.php Text below has been added by Nokia: Impor
-
HTLM Web Gallery not showing pictures
When I upload from Bridge the web gallery it doesn't show the pictures? Yet, when I export the HTML web gallery to my hard drive it does. Any ideas? Thanks,
-
How does iPod Mini store songs and playlists?
Hi, I am a new user of iPod Mini. I have some music in my music library in iTunes and I have created a few playlists. Some songs are in multiple playlists. When I copy over these playlists, will these music files get copied over twice or only once? I
-
How to pass a Structure as input parameter
Hello, Anyone knows how to instanciate, populate and pass a Structure into RFCInvoke? Thanks!
-
I just bought an ipad2 which I love. I want to use my cell as a hotspot, but do not have iPhone. A friend is willing 2 give me an older one. With the right data plan, will it work as well as The newer iPhones? The older phone will save me money by av