Illegal dependency while using a DC from one Software Component in another

Hi
SCENARIO
I have a Software Product (e.g. SP1) with 2 Software Components (e.g. SC1, SC2) defined in the SLD. Now, we have defined a track with these software components (as per the correct procedure).
This Development configuration was imported into NWDS and we have developed 2 WebDynPro Development Components under each of these Software Components (e.g. DC1 in SC1 ; DC 2 in SC2).
All works fine and everything is smooth till now.
The ISSUE
When I try to use DC1 of SC1 as a used component in DC2 of SC2, I get an error.
The exact step: In NWDS-> DC2, I go to USED DCs -> Add Used DC and try to add DC1's public part (all as per correct procedure),
I get the following error:
Illegal dependency: The compartment of com.test/xss/dc2(com.test_SC1) must explicitly use compartment of com.test/xss/dc1
This error comes only if DC1 is in SC1 and DC2 is in SC2. If 2 DCS are in the same SC (eg: DC1 and DC2 to SC1), then the error does not come.
Should we configure any compartment or other data in CBS/CMS?
Please help.
Thanks in advance.

Sandeep,
In the SLD, has a dependency been setup between SC1 and SC2? If not, you will have to add this dependency, which is done in the same way as adding the initial SAP_JTECHS,
SAP_BUILDT and SAP-JEE dependencies to the SC.
Once the SC1 has been added to SC2, you will have to go to the Landscape Configurator (link is in the CMS), go to the Domain Data tab and click on Update CMS. Next, go to the Track Data tab, add the new SC and then click on Synchronize SC Dependencies. Click on the Save button and then do a "Save and Restore".
Message was edited by:
Stefan Thibeault (added a missing step!)

Similar Messages

Why can´t I use original HPinkcartridges from one HP printer to another HPprinter it says use origin

why can´t I use original HPinkcartridges from one HP printer to another HP printer, it says use original cartridges -
but they are original?

If the printers are identical that should not be a problem. If the printers are not identical then it simply will not work. Each printer uses different cartridges unless it is from the same model group as the other.
In analogy that would be like asking why the spark plugs from a Porsche don't work in your PT Cruiser.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

HT4796 can i use migration assistant from one windows laptop to another

I need to set up iTunes on a new laptop but I don't know how to do it. Migration assistant seems to be only from a windows p.c. to a mac laptop. I want to transfer all my music from old (vista) to new (7). Can I do this?

No. Migration Assistant only works when using OS X on one of the computers. You would have to ask Microsoft Support.
Hope this helps

How to copy all namespaces from one software component version to another

i want to make a new software component version of the same procuct in the integration builder(DESIGN),
how can i do that,
i mean to say, after making it in SLD, and importing it into design, how can i copy all the name spaces present in the previous software component version into the new software component version

K remember while transporting only active objects can be transported and if the object you want to transport is not active then last active version will be transpoted.
While transporting design objects prerequisite the s/w comp version has to be same.
Go through this it will answer every issue
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/93/a3a74046033913e10000000a155106/content.htm">TRANSPORTING XI OBJECTS</a>
*CORRECT IF I AM WRONG*
Cheers,
*RAJ*
*REWARD POINTS IF FOUND USEFULL*

Using a lookup from one CSV file to another CSV file errors with a name clash

Hi
I have a master CSV file created by querying the AD. I need to populate the "Team" attribute by doing a lookup using Name against the Name Column any of 6 CSVs, someone has prepared for me . The problem is the data is inconsistent
in the 6 CSV files so Name can hold either the Name or Username i.e. SAmAccountName or LoginName
Now my ps script works when the data is good. but I have around 30 exception cases whereby there is a mismatch . To explain:
is in this line ( see the big code block below)
$userObject = $nameAndTeamCsvData | Where-Object {$_.Name -eq $masterUserName}
The $_.Name is using the top level masterCSVData Name but I was hoping that it was using the
$nameAndTeamCSVData.Name as in only within the scope of the Where-Object {} ..I guess I have misunderstood the syntax of what I had written.
. A quick a dirty fix would be rename this column in all of the 4 spreadsheets or trying to fix the code.....
# now update the empty team value for user object
$csvMasterData | ForEach-Object `
$masterName = $_.Name
$masterUserName = $_.Username # to deal with exception cases
#force scope to as the properties in the outer with the same name should be out of scope
# lookup the Name to see if we can extract the user's Team
$userObject = $nameAndTeamCsvData | Where-Object {$_.Name -eq $masterName }
# deal with the situation where the name in the businesses spreadsheets is actually the Username (login name) in the master csv
if ( $userObject -eq $null )
# lookup the username (loginname) to see if we can extract the user's Team # !!!!error occurs here with the $_.Name !!!!!
$userObject = $nameAndTeamCsvData | Where-Object {$_.Name -eq $masterUserName}
if ( $userObject -eq $null )
$_.Team = "UNKNOWN"
else
# replace the mastercsv.Team with the one we have looked up
$_.Team = $userObject.Team
else
# Name matches so replace the mastercsv.Team with the one we have looked up
$_.Team = $userObject.Team
Daniel

I see your challenge. How about collecting the column names in an array and looking for the potential names? Following my example before, try this:
$dataColumns = $I | Get-Member -MemberType NoteProperty | Select-Object -ExpandProperty Name
Now, you can loop through the names and collect the appropriate data.
if ($dataColumns.Contains('Column1'))
#add ForEach-Object { $_.Column1... }
HTH
~fr3dd
Hi I had to wait until Friday as I have someone ( my boss) checking the business & team csv files against valid usernames and names.
# now update the empty team value for user object
$nameAndTeamCsvData | ForEach-Object `
$nt_name = $_.Name
# $masterUserName = $_.Username # to deal with exception cases
# lookup the Name to see if we can extract the username and mobile from the masterCSV
$userObject = $null # Replace my original code: $csvMasterData | Where-Object {$_.SName -eq $nt_name } # with foreach code below
$uo = $null
foreach ($uo in $csvMasterData)
if ($uo.SName -eq $nt_name)
$userObject = $uo
# ouch can't break out of this even though I found it so have to move on to the next
}if ( $userObject -ne $null ){ # Name matches so replace the few propeerties in mastercsv.Team with the ones we have looked up
$_.Username =$userObject.SamAccountName
$_.Mobile =$userObject.Mobile
This does work but is clearly not very efficient since I don't think I can
break or exit out of the foreach loop. I am thinking I could quickly modify and add your code - my import is delayed as I am having a new property added to user class... Let me know what you think.

Can you pass parameters from one application component to another?

I want to have a page of portlets showing applications components (small forms, reports etc) with co-ordinated information.
That is, I want the user to enter a single criterion in a portlet and then I want all the portlets to respond by querying the results for that single criterion.
I'm building an interface for a system based on normalized tables with many-to-many relationships and therefore intersecting-entities.
(I looked at master-detail forms under webdb, so I don't think they'll do the job. I have data from about 6 tables that I want co-ordinated.)
Links also don't seem to be what I want, because I don't want extra clicks or one portlet to be replaced by another.
I've seen the Parameter Passing example, and that is the sort of coordination I'd like. In fact that's what gave me the idea. But that is based on custom database portlets, whereas I really want to use Portal forms and reports.
Is this possible?
null

The general Oracle9iAS Portal forum is your best bet for this question.

Using an audio from one video to another

I am trying to make a documentary type film and I want to use an audio segment from one video to overlap another video's audio while using the second video just for the video. Here is an example of it.
http://www.youtube.com/watch?v=9u7dJXDhOjc
Im trying to acheive what they did for the first 15 seconds of this clip. I use movie 08.

This is easy in iMovie 09.
Here is [how to do it in iMovie 08|http://imovie08.blogspot.com/2007/08/how-to-extract-audio-from-clip.html]

Using FDM to transfer data from one HFM app to another

We are facing a project in which we need to load data from one HFM app to another. There're some mapping going so it was advised that FDM be used.
However, the HFM extract files contain all data on the rows. While for the FDM multiload, the data from different periods need to be layed out on the columns. Also, we have multiple scenarios/years of data to handle. What would be the best approach? Has anyone had similar experience to load data from one HFM app to another using FDM? Thanks!

It appears that this is some kind of migration project due to the scope of the data contained in the single file? If so whatever you do is like ly to be trow away once the migration of data is completed.
You have a couple of options:
1) Get the data extracted from HFM in multiple files instead of one bulk file, broken down by scanario,year & period
2) Take the single data dump file produced by FDM and manipulate it yourself to get the data in a more usuable format for processing through FDM.
Option 2 could be achieved via any ETL tool or a custom file parsing script. What may be more attractive to you and allow you to fully leverage your investment in FDM is that you could use the PULL adapter that ships as part of the FDM adapter suite to perform this transformation exercise. The PULL adapter takes a flat file input and allows you to use all the in built functionality of FDM to transform it and output a modified flat file (or series of flat files). You could use it to produce multioload files or a series of files broken down by scenario,year,period.
Whatever you do I would suggest that break the single data file down into smaller chunks as this will help with the iterative debugging process you will inevitably have to undetake whislt migrating the data to the new application.

I have a document made up of separate PDF files which reside in a folder and are linked to each other via hyperlinks. Each pdf file is set to open with bookmarks displayed, however if I link from one PDF file to another and use the "Previous View" button

I have a document made up of separate PDF files which reside in a folder and are linked to each other via hyperlinks. Each pdf file is set to open with bookmarks displayed, however if I link from one PDF file to another and use the "Previous View" button to navigate back to my starting point the bookmarks are replaced by "page thumbnails". Is there anyway to stop this from happening?

Hi Pusman,
While setting up the links, if you choose to open the file in a new window then you won't face this issue, then you can simply switch to the previous file and bookmark view will remain as it is.
Does that helps with your query?
Regards,
Rahul

HT4614 Can I use Thunderbolt to Thunderbolt cable to copy from one macbook air to another?

Can I use Thunderbolt cable to copy from one Macbook Air to another Macbook Air?

Of course, but you will have to start one of the Macs into Target Disk Mode, pressing T key while the Mac is starting with the Thunderbolt cable connected, so the MacBook Air in Target Disk Mode will appear on the Finder sidebar of the other Mac as an external disk, so you can copy and transfer files from and to it

Not able to copying files/folders from one Document Library to another Document Library using Open with Browser functionality

Hi All,
We have SharePoint Production server 2013 where users are complaining that they are not able to copy or move files from one document library to another document library using “Open with Explorer” functionality.
We tried to activate publishing features on production server but it did not work. We users reported following errors:
Copying files from one document library to another document library:
Tried to map the document libraries and still not get the error to copy files:
In our UAT environment we are able to copy and move folders from using “Open with Explorer” though.
We have tried to simulate in the UAT environment but could not reproduce the production environment.
Any pointers about this issue would be highly appertained.
Thanks in advance
Regards,
Aroh
Aroh Shukla

Hi John and all,
One the newly created web applications that we created few days back and navigated to document library, clicked on “Open with Explorer”, we get this error.
We're having a problem opening this location in file explorer. Add this website to your trusted and try again.
We added to the trusted site in Internet Explorer for this web application, cleared the cache and open the site with same document library but still get the same above error.
However, another existing web application (In same the Farm) that we are troubleshooting at the moment, we are able click on “Open with Explorer”, login in credentials opens and we entered the details we are able to open the document
library and tried to follow these steps:
From Windows Explorer (using with Open with Explorer), tried to copy or move a files to
source document library.
From Windows Explorer moved this file to another destination document library and we got this error.
What we have to achieve is users should be able to copy files and folders using
Open with Explorer functionality. We don’t know why Open with Explorer
functionality not work working for our environment.
Are we doing something wrong?
We have referred to following websites.
we hope concepts of copying / Moving files are similar as SharePoint 2010. Our production environment is SharePoint 2013.
http://www.mcstech.net/blog/index.cfm/2012/1/4/SharePoint-2010-Moving-Documents-Between-Libraries https://andreakalli.wordpress.com/2014/01/28/moving-or-copying-files-and-folders-in-sharepoint/
Please advise us. Thank you.
Regards,
Aroh
Aroh Shukla

How do I copy a page from one Pages document to another using Pages 5.0?

I posted this question on another page, and haven't recieved an answer to it yet. However I have found a temporary solution, so I am posting this here in case anyone else has a similar problem.
The issue here is that I have just upgraded from Snow Leopard to Maverick (10.9.1), and my Pages also upgraded (to 5.0.1), altering my Pages documents. This is the issue, as as far as I can see the new Pages does not offer some of the basic needs that the old Pages did! In other words it is worse than the previous version.
Using the upgraded new Pages 5.0.1 seems to result in some major editing problems for me. If you upgrade, make sure you KEEP the old version of Pages 09 (v 4.3). That is what has saved me! If you have the same problems I have had - explained below, you will still be able to close the new version and open your Pages document in the old version, provided it is not a new Pages document. If it is, it will be possible to export it as a Pages 09 document and edit properly.
After upgrading to the new Pages 5.0.1, when I open documents in Pages and try and copy a section from one document to another (easy before using the thumbnails) many of the Menu items previously available are visible but appear faded and are not possible, including Insert>Section Break/Page Break/Page Number and Edit>Cut/Copy/Delete/Undo/Redo
This even happens if I duplicate the Pages document and try and do any of these from the Duplicate (which should be an easily editable copy).
My solution has been to simply open all Pages documents that Iwant to edit (or may want to edit in future) in the old Pages app (v 4.3), which I never got rid of. That has meant I can continue editing and copying a section (of 1 or more pages) from one Pages document to another.
If anyone reading this has figured out a way to edit Pages documents using the new version 5.0.1 please post an explanation, and I will try it!

And there are those who don't like me repeating the same message over and over again in this forum!
Apple has removed over 90 features from Pages 5.
http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=3527487677f0c 6fa05b6297cd00f8eb9&mforum=iworktipsntrick
Pages '09 should still be in your Applications/iWork folder.
Archive/trash Pages 5, after Exporting your files to Pages '09, and rate/review it in the App Store, then get back to work.
Peter

I have a Windows 7 laptop using I tunes 64 and all my music files are on an external disc. I rarely use I tunes and at one point moved all my files (including the music files) from one external disc to another without considering what affect this wou

I have a Windows 7 laptop using I tunes 64 and all my music files are
on an external disc. I rarely use I tunes and at one point moved all my files
(including the music files) from one external disc to another without
considering what affect this would have on the I tunes library. When I eventually
attempted to use I tunes, every selected a song from the library resulted in a
message stating that the file couldn't be located. After following some of the procedures
explained in this community I was able to reconnect the library back to where
the associated music files are presently stored. However, there are still 2
problems that need to be corrected. 1) Every song file now has a duplicate. One
file works and the other file will result in the same message stating that the
file couldn't be located. Before there were 4,000 songs in the library, now
there are 8,000 songs. I need to eliminate the 4,000 dead song files. 2) All
the playlists are still associated with the dead song files which makes the
playlists unusable. Can the playlists be reconnected to the usable files
without manually having to recreate them? Thanks in advance for the help.
sdkr

So am I understanding correctly?
You used your iPod as a hard drive (drag and drop) instead of having iTunes install the music?
If you used drag and drop your choices are different than if you used iTunes to transfer.
Good luck!

Error while reassigning the FM from one FG to other.........

Hi Gurus,
While reassigning a Function Module from one Function Group to another I am getting the error: Object components locked in different tasks...
Please help.
Abhi...

thanks...
Abhi.

Move group of pages from one InDesign file to another InDesign File using VB.Script

Dear team,
I am trying to move group of InDesign pages from one indesign file to another indesign file using vb.script.
I have written the code like
Dim Pages=IndDoc.Pages
Dim Mytype=TypeName(Pages)
Pages.Move(InDesign.idLocationOptions.idBefore,IndDoc1.Pages.LastItem)
but it is giving an error as method Move is not a member of Pages
please give mme the solution to move the Multiple pages or a group of page from one Indd to another Indd.

Hey Peter, if I wan to move several page that part of Auto Flow text, I checked the "delete page after moving" but the content still there, not deleted.
Is there any way to delete it automatically, just to make sure I have moved that autoflowed page?

Illegal dependency while using a DC from one Software Component in another

Similar Messages

Maybe you are looking for