IllegalStateException in WL8.1 but not in WL5.1

          I am migrating my application from WL5.1 to 81.
          I have a piece of Servlet A which forwards to another Servlet B for processing.
          After Servlet B is done, the control is passed back to Servlet A which finally
          ends with a response.sendRedirect to a URL. In WL5.1, this is perfectly alright.
          But in WL8.1, IllegalStateException is thrown as the response is already committed.
          I noticed that in WL5.1 the response remains uncommitted after the forward to
          Servlet B, but not so in WL8.1, thus the exception.
          Is there a change in the specification from WL5.1 to 8.1? Why the different behavior?
          (I know, it is a bad idea to have multiple forwards or sendRedirects within a
          servlet.)
          

hi,
stefen.
look this sample code.
u will get a clear idea.
table emp
empno name
a sasi
b xxx
c yyy
table sal
empno salary
a 1000
b 2000
Inner join
select eempno ename
s~sal
into table int_table
from emp as e
inner join sal
on
eempno = sempno.
if you made inner join between table a and b by emp no
the selection retrives only if the condition satisfy the output will be
a sasi 1000
b xxx 2000
Outer join
select eempno ename
s~sal into table  int_table
from emp as e
LEFT OUTER JOIN sal
on
eempno = sempno.
if you made outer join (left /right ) the left table kept as it is the
if the condition satisfy the right table entries will fetch else leave it blank
the output will be
a sasi a 1000
b xxx b 2000
c yyy
rgds
anver
if helped mark points

Similar Messages

  • Users found, but not displayed in console with WL8.1 SP5 and iPlanet LDAP

    Hi all,
    I've just installed WL8.1 SP5 and have recreated my domain configuration, as happily used by SP4.
    All seems well until I add an iPlanetAuthenticator via the console. The console reports that it has been created successfully, but when I browse users, I am told that the console is displaying the first 51 of the 413 users found, but only six are displayed, those six being in the internal LDAP.
    If I re-order the configured authentication providers and put my iPlanet Authenticator first, entries from iPlanet are displayed, but a search to find users in the internal LDAP return nothing.
    When I say return nothing, it does not fail! No error is returned and on looking at the HTML I find that blank table row(s) are placed in the results page, their number corresponding to the number of users found in the 'invisible' LDAP directory.
    My application works - meaning that users are being found, but not being able to see them through the console is a show stopper. Has anyone else come across this problem? Can anyone help? At the moment, I'm stumped as to how to solve it!
    All the best,
    Tim.

    Hi all,
    This problem was raised with BEA support and a patch produced.
    All the best,
    Tim.

  • Insert BLOB error in IAS but not in JDeveloper

    Hi
    Our application have a Servlet who executes an INSERT using a PrepareStatement (created by the Transaction of an ApplciationModule)
    In Jdeveloper (10.1.2) this works OK
    But when deploy it in the IAS (904) we have an error:
    java.sql.SQLException: Io exception: Connection reset
    at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:189)
    at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:231)
    at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:345)
    at oracle.jdbc.driver.OracleStatement.executeNonQuery(OracleStatement.java:2094)
    at oracle.jdbc.driver.OracleStatement.doExecuteOther(OracleStatement.java:1986)
    at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:2697)
    at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:457)
    at com.asorco.sgie.controller.servlets.general.Archivo.uploadFile(Archivo.java:176)
    at com.asorco.sgie.controller.servlets.general.Archivo.doPost(Archivo.java:118)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:733)
    at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:317
    at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:793)
    at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:208)
    at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:125)
    at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.ja
    va:192)
    at java.lang.Thread.run(Thread.java:534)
    In the IAS, Im using the jars used in JDeveloper (classes12.jar, classes12dms.jar, nls_classes12.jar).
    Any knows the reason?
    Thank you!

              The effect to use <jsp:forward> or RequestDispatcher.forward is different between
              BEA and Tomcat (even Websphere). Weblogic stores the output in a buffer, before
              the buffer reaches the limit, you can call those forward methods without obvious
              problems. Tomcat (and Websphere I ever tested) is not so tolerable. If you have
              send out something via Servlet writer or JSPWriter, or have something like HTML
              tags/text before forwards, chances are big to encounter the exceptions you have.
              So I use more include methods to assemble my JSPs and servlets, for the purpose
              of portability.
              "Aidan Monroe" <[email protected]> wrote:
              >
              >I have a .war file that runs perfectly in WebLogic 7.0. Today I tried
              >to run that
              >same .war in Tomcat 4.0.6. Unfortunately, it did not run. I get the following
              >error:
              >
              >java.lang.IllegalStateException: Cannot forward after response has been
              >committed
              >
              >Now, I know what this error means, but I don't know why I would get it
              >when I
              >run in Tomcat but not WebLogic. Does WebLogic do something to "insulate"
              >me from
              >this error that perhaps Tomcat does not do?
              >
              >Aidan
              >
              

  • Error In Tomcat But Not In WebLogic

              I have a .war file that runs perfectly in WebLogic 7.0. Today I tried to run that
              same .war in Tomcat 4.0.6. Unfortunately, it did not run. I get the following
              error:
              java.lang.IllegalStateException: Cannot forward after response has been committed
              Now, I know what this error means, but I don't know why I would get it when I
              run in Tomcat but not WebLogic. Does WebLogic do something to "insulate" me from
              this error that perhaps Tomcat does not do?
              Aidan
              

              The effect to use <jsp:forward> or RequestDispatcher.forward is different between
              BEA and Tomcat (even Websphere). Weblogic stores the output in a buffer, before
              the buffer reaches the limit, you can call those forward methods without obvious
              problems. Tomcat (and Websphere I ever tested) is not so tolerable. If you have
              send out something via Servlet writer or JSPWriter, or have something like HTML
              tags/text before forwards, chances are big to encounter the exceptions you have.
              So I use more include methods to assemble my JSPs and servlets, for the purpose
              of portability.
              "Aidan Monroe" <[email protected]> wrote:
              >
              >I have a .war file that runs perfectly in WebLogic 7.0. Today I tried
              >to run that
              >same .war in Tomcat 4.0.6. Unfortunately, it did not run. I get the following
              >error:
              >
              >java.lang.IllegalStateException: Cannot forward after response has been
              >committed
              >
              >Now, I know what this error means, but I don't know why I would get it
              >when I
              >run in Tomcat but not WebLogic. Does WebLogic do something to "insulate"
              >me from
              >this error that perhaps Tomcat does not do?
              >
              >Aidan
              >
              

  • Issues with duplicate IDs - maybe a MyFaces problem but not sure

    I've been having a heap of trouble getting the DataScroller object working. It simply refuses to allow me to have facets. It works perfectly fine in the examples but not in my page. I'd really appreciate it if anyone can help me out. This thing has been bothering me for days.
    I'm new to JSF so any other hints about how I should write it would be nice for future reference. You know, things like "you should make sure these tags are before these ones" and that.
    The code that causes the error (messages.jsp):
    <%@ taglib uri="http://java.sun.com/jsf/html" prefix="h"%>
    <%@ taglib uri="http://java.sun.com/jsf/core" prefix="f"%>
    <%@ taglib uri="http://myfaces.apache.org/tomahawk" prefix="t"%>
    <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
    <f:view>
    <HTML>
    <HEAD><TITLE>Some thing</TITLE>
    <BODY>
    <CENTER>
        <h:panelGroup id="group">
            <h:panelGrid columns="1" id="grid">
            <t:dataTable id="messagedata"
                    var="message"
                    value="#{listMessage.messages}"
                    rows="10">
               <t:column>
                   <f:facet name="header">
                <h:outputText value="Time Transferred" />
                   </f:facet>
                   <h:outputText value="#{message.timeTransferred}" />
               </t:column>
               <t:column>
                   <f:facet name="header">
                <h:outputText value="Purpose" />
                   </f:facet>
                   <h:outputText value="#{message.actionPerformed}" />
               </t:column>
            </t:dataTable>
                <t:dataScroller id="scrollnice"
                        for="messagedata"
                        fastStep="10"
                        pageCountVar="pageCount"
                        pageIndexVar="pageIndex"
                        paginator="true"
                        paginatorMaxPages="9"
                        paginatorActiveColumnStyle="font-weight:bold;">
                    <f:facet name="first" >
                        <t:graphicImage id="theproblem" url="images/arrow-first.gif" border="1" />
                    </f:facet>
                </t:dataScroller>
            </h:panelGrid>
        </h:panelGroup>
    </CENTER>
    </BODY>
    </HTML>
    </f:view>and the error page:
    exception
    javax.servlet.ServletException: Client-id : theproblem is duplicated in the faces tree.
         javax.faces.webapp.FacesServlet.service(FacesServlet.java:109)
         org.apache.myfaces.component.html.util.ExtensionsFilter.doFilter(ExtensionsFilter.java:112)
    root cause
    java.lang.IllegalStateException: Client-id : theproblem is duplicated in the faces tree.
         org.apache.myfaces.application.jsp.JspStateManagerImpl.checkForDuplicateIds(JspStateManagerImpl.java:241)
         org.apache.myfaces.application.jsp.JspStateManagerImpl.checkForDuplicateIds(JspStateManagerImpl.java:255)
         org.apache.myfaces.application.jsp.JspStateManagerImpl.checkForDuplicateIds(JspStateManagerImpl.java:255)
         org.apache.myfaces.application.jsp.JspStateManagerImpl.checkForDuplicateIds(JspStateManagerImpl.java:255)
         org.apache.myfaces.application.jsp.JspStateManagerImpl.checkForDuplicateIds(JspStateManagerImpl.java:255)
         org.apache.myfaces.application.jsp.JspStateManagerImpl.checkForDuplicateIds(JspStateManagerImpl.java:255)
         org.apache.myfaces.application.jsp.JspStateManagerImpl.saveSerializedView(JspStateManagerImpl.java:204)
         org.apache.myfaces.taglib.core.ViewTag.doEndTag(ViewTag.java:122)
         org.apache.jsp.messages_jsp._jspx_meth_f_view_0(org.apache.jsp.messages_jsp:132)
         org.apache.jsp.messages_jsp._jspService(org.apache.jsp.messages_jsp:81)
         org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:97)
         javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
         org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:322)
         org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:291)
         org.apache.jasper.servlet.JspServlet.service(JspServlet.java:241)
         javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
         org.apache.myfaces.context.servlet.ServletExternalContextImpl.dispatch(ServletExternalContextImpl.java:415)
         org.apache.myfaces.application.jsp.JspViewHandlerImpl.renderView(JspViewHandlerImpl.java:234)
         org.apache.myfaces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:300)
         javax.faces.webapp.FacesServlet.service(FacesServlet.java:95)
         org.apache.myfaces.component.html.util.ExtensionsFilter.doFilter(ExtensionsFilter.java:112)Thanks in advance for any help.

    Emilio Corsetti wrote:
    Ben,
    That was the problem. The link is live now and you can see the poorly positioned spry menu in all its glory.
    Thanks,
    Emilio
    http://www.emiliocorsetti.com/publish/two_column.html
    You don't say what you want to change.
    If I were styling your menu I would have it vertically centered in the grey background. By adding the red coloured rule found in layout.css
    #menu (line  61)
    background-image:  url("../Images/Layout/nav_bg.jpg");
    background-repeat: repeat-x;
    background-position:  left top;
    width: 960px;
    height: 40px;
    padding-top: 10px; // or whatever suits
    I would also like to have the menu items spread evenly across the page by applying the style rule found in SpryMenuBarHorizontal.css
    ul.MenuBarHorizontal li
         margin: 0;
         padding: 0;
         list-style-type: none;
         font-size: 100%;
         position: relative;
         cursor: pointer;
         width: 20%; // 5 items X 20% = 100%
         float: left;
    You may have to fiddle a bit more after this to get it exactly the way you want. Just start a new topic because this one has already been answered.
    Happy Sprying.
    Ben

  • Can you check for data in one table or another but not both in one query?

    I have a situation where I need to link two tables together but the data may be in another (archive) table or different records are in both but I want the latest record from either table:
    ACCOUNT
    AccountID     Name   
    123               John Doe
    124               Jane Donaldson           
    125               Harold Douglas    
    MARKETER_ACCOUNT
    Key     AccountID     Marketer    StartDate     EndDate
    1001     123               10526          8/3/2008     9/27/2009
    1017     123               10987          9/28/2009     12/31/4712    (high date ~ which means currently with this marketer)
    1023     124               10541          12/03/2010     12/31/4712
    ARCHIVE
    Key     AccountID     Marketer    StartDate     EndDate
    1015     124               10526          8/3/2008     12/02/2010
    1033     125               10987         01/01/2011     01/31/2012  
    So my query needs to return the following:
    123     John Doe                        10526     8/3/2008     9/27/2009
    124     Jane Donaldson             10541     12/03/2010     12/31/4712     (this is the later of the two records for this account between archive and marketer_account tables)
    125     Harold Douglas               10987          01/01/2011     01/31/2012     (he is only in archive, so get this record)
    I'm unsure how to proceed in one query.  Note that I am reading in possibly multiple accounts at a time and returning a collection back to .net
    open CURSOR_ACCT
              select AccountID
              from
                     ACCOUNT A,
                     MARKETER_ACCOUNT M,
                     ARCHIVE R
               where A.AccountID = nvl((select max(M.EndDate) from Marketer_account M2
                                                    where M2.AccountID = A.AccountID),
                                                      (select max(R.EndDate) from Archive R2
                                                    where R2.AccountID = A.AccountID)
                   and upper(A.Name) like parameter || '%'
    <can you do a NVL like this?   probably not...   I want to be able to get the MAX record for that account off the MarketerACcount table OR the max record for that account off the Archive table, but not both>
    (parameter could be "DO", so I return all names starting with DO...)

    if I understand your description I would assume that for John Dow we would expect the second row from marketer_account  ("high date ~ which means currently with this marketer"). Here is a solution with analytic functions:
    drop table account;
    drop table marketer_account;
    drop table marketer_account_archive;
    create table account (
        id number
      , name varchar2(20)
    insert into account values (123, 'John Doe');
    insert into account values (124, 'Jane Donaldson');
    insert into account values (125, 'Harold Douglas');
    create table marketer_account (
        key number
      , AccountId number
      , MktKey number
      , FromDt date
      , ToDate date
    insert into marketer_account values (1001, 123, 10526, to_date('03.08.2008', 'dd.mm.yyyy'), to_date('27.09.2009', 'dd.mm.yyyy'));
    insert into marketer_account values (1017, 123, 10987, to_date('28.09.2009', 'dd.mm.yyyy'), to_date('31.12.4712', 'dd.mm.yyyy'));
    insert into marketer_account values (1023, 124, 10541, to_date('03.12.2010', 'dd.mm.yyyy'), to_date('31.12.4712', 'dd.mm.yyyy'));
    create table marketer_account_archive (
        key number
      , AccountId number
      , MktKey number
      , FromDt date
      , ToDate date
    insert into marketer_account_archive values (1015, 124, 10526, to_date('03.08.2008', 'dd.mm.yyyy'), to_date('02.12.2010', 'dd.mm.yyyy'));
    insert into marketer_account_archive values (1033, 125, 10987, to_date('01.01.2011', 'dd.mm.yyyy'), to_date('31.01.2012', 'dd.mm.yyyy'));
    select key, AccountId, MktKey, FromDt, ToDate
         , max(FromDt) over(partition by AccountId) max_FromDt
      from marketer_account
    union all
    select key, AccountId, MktKey, FromDt, ToDate
         , max(FromDt) over(partition by AccountId) max_FromDt
      from marketer_account_archive;
    with
    basedata as (
    select key, AccountId, MktKey, FromDt, ToDate
      from marketer_account
    union all
    select key, AccountId, MktKey, FromDt, ToDate
      from marketer_account_archive
    basedata_with_max_intervals as (
    select key, AccountId, MktKey, FromDt, ToDate
         , row_number() over(partition by AccountId order by FromDt desc) FromDt_Rank
      from basedata
    filtered_basedata as (
    select key, AccountId, MktKey, FromDt, ToDate from basedata_with_max_intervals where FromDt_Rank = 1
    select a.id
         , a.name
         , b.MktKey
         , b.FromDt
         , b.ToDate
      from account a
      join filtered_basedata b
        on (a.id = b.AccountId)
    ID NAME                     MKTKEY FROMDT     TODATE
    123 John Doe                  10987 28.09.2009 31.12.4712
    124 Jane Donaldson            10541 03.12.2010 31.12.4712
    125 Harold Douglas            10987 01.01.2011 31.01.2012
    If your tables are big it could be necessary to do the filtering (according to your condition) in an early step (the first CTE).
    Regards
    Martin

  • HT1386 I have synced the items from itunes to an iphone 4 without problem, except the two albums I just purchased did not sync.  They show up on the itunes on my desktop and on my ipod, but not on the new iphone.  What do I need to do?

    I have an itunes account and an ipod, and when I purchased 2 albums on the computer they synced straight to the ipod.  I bought an iphone and used the usb cord from the computer to it to sync the itunes albums to the new phone.  Everything transfered, and those were albums I had uploaded (not purchased from the itunes store), except the two albmus I just purchased from the itunes store.  They appear on my itunes on the computer and ipod, but not on the iphone.  What did I fail to do or did I do incorrectly?

    This might sound weird, but here's an idea which worked for me re music that was newly added to itunes and showed up in my ipod but wouldn't play - I simply played the tracks in itunes first, just a second of time or so will do it, not the whole track, then connect the ipod and sync again and this time they played - hope this helps.

  • Sharepoint Foundation - search working for some users (or computers), but not others

    Hi all,
    We have doozy of a search problem with SharePoint Foundation 2010 that I'm hoping someone can help with.
    We have an application that is listening on port 14197 and search is working just fine, but only for one or two users.
    If I do a search while logged in using the account we set the application up with then the search works fine and it returns records as expected.
    If I use a different account - one that has full control over the app, then the exact same search fails with the following message:
    We did not find any results for 06BSL.
    Suggestions:
    Ensure words are spelled correctly.
    Try using synonyms or related searches.
    Try broadening your search by searching from a different site.
    Additional resources:
    Get additional search tips by visiting Search Help
    If you cannot find a page that you know exists, contact your administrator.
    We've done everything we can think of, including several procedures to create new search accounts, replace databases, etc.
    Nothing has helped and all of the info we can find online is in relation to getting search working when it doesn't work at all.  In our case it is working, but only for some users.  We thought it might have been a permissions issue, but not matter
    what permissions we seem to give to test accounts they still don't work.  We've set up a test account, for example, that is a member of the 'application owners' group, but cannot produce any search results with it.
    The SharePoint Foundation server is running on Windows 2008 Server Foundation, with a separate SBS 2003 DC.  
    Any help most appreciated.

    Hi Alex, thanks for your response and apologies about the late reply - didn't realise someone had responded until now!
    Agreed that this looks like a permissions issue, but we're stumped as to what it could be.  The 'test' account displays this problem - if we try and search on 06BSL
    we get no results, but it does appear that this account has full control over this document (see below).
    Note that the 'Manage Permissions' page presents a comment 'This list item inherits permissions from its parent. (Customer QA & Product Management)' which is what we're
    expecting.
    The indexing schedule is set to 5 minutes. 
    Appreciate your help with this, as we've spent a huge amount of time on this problem but don't seem to be any closer to a resolution.
    Cheers,
    Damian
    Check permissions result (this result is the same for the list or for the document itself):
    Permission levels given to test (DOMAIN\test)
    Full Control
    Given through the "QA Application Owners" group.
    Design, Contribute, Read
    Given through the "QA Application Members" group. 

  • Why does GarageBand audio work for guest user but not my account?

    Hello, I have a 15-inch MacBook Pro (2.2 GHz Intel Core i7, 4GB 1333 MHz DDR3) from late 2011 that I bought brand new in 2012. I'm running OS X Mavericks 10.9.4 and my MacBook has 500 GB of storage.
    About a month or two ago I tried to download the new GarageBand (10.0.2) but I had trouble completing the loops download. The download would stop halfway through because of a network error. So last week I decided to try to download it again, and I was able to do so after reading some discussions about the issue. I successfully completed the download in safety mode and then I restarted my MacBook. At this point I was able to open GarageBand 10.0.2 and create a new project. Unfortunately, there was no audio coming through the output and sound bar for the various audio components in GarageBand. I had no audio when previewing the loops or playing it back in an audio track. I didn't really test anything else out because I figured I needed to fix this problem first. I have read many discussion boards about audio problems with GarageBand. I have already made sure everything is set properly in the GarageBand preferences and the audio preferences in system preferences. I've tried restarting GarageBand and restarting the computer.
    This evening I found a discussion from the username icewhatice and they seemed to have had my exact problem. I'm not sure that I found the answer on this discussion though. For reference, this is what icewhatice posted: "I have no audio coming from Garageband 10.0.2. Downloaded it on Saturday and have spent the last two days trying to figure out why it won't work. I'm using a macbook pro with an Alesis QX49. GB registers keyboard when I plug it in but no sound whatsoever, not even from the onscreen keyboard. It seems to read the keyboard as if I play a C chord, it appears in the display. I've done all the obvious stuff like check preferences, restart, I've deleted and downloaded new GB several times and always with same result. Actually, it took me about four attempts to download it in the first place as I was getting an internet connection error message right at the end of the download, and I see others have had that problem. Managed to solve that by downloading in safe mode but now the no sound thing is driving me absolutely crazy because I can't play my keyboard!!!!! Also, worth noting that there is no audio level being read anywhere, I believe in the new version this appears in the volume control at the top. I've also looked into it potentially being a problem with my keyboard and it possibly needing an update but can't find any difinitive answer for that anywhere. I've stopped looking into that because the on screen keyboard doesn't even work - if that worked then I would know at least GB works and it's something to do with the keyboard. So, I am at a complete loss. If anyone has any ideas about why this is happening or what I could do to solve then I would be very grateful."
    After reading this, I realized that I am unable to create new tracks, and I realized that I have the same problems with old projects saved from the last version of GarageBand I had. I have not tried to download GarageBand again since it did not work for icewhatice. léonie ended this post by saying: "Something is certainly wrong - either the current project, some settings in your user account, or the downloaded GarageBand version. Or incompatible software may be interfering. If a new project does not work, try to test by logging into a different user account, for example the "Guest User" account. Create a new project using this account. Does GarageBand work better from this account?  Then we will need to troubleshoot your preferences."
    I have tried this and started a new GarageBand project in the "Guest User" account. GarageBand was working fine in the "Guest User" account and all of the audio was working properly. Does anyone know how I should troubleshoot my preferences?

    If an application is working in a different account, but not in your regular account,try t find out, what you configured differently in your own account, for example start-up items or preference panes you are using, applications and other helper tools, that are only installed for your regular account. As a first guess, remove GarageBands preference files from the user library in your Home folder.
    But you will have to reset all settings you did in the GarageBand preferences dialog. And GarageBand will not remember the last project. You'll have to find the file manually.
    Remove these files from your User Library to a folder on your Desktop:
    ~/Library/Containers/com.apple.garageband10/
    ~/Library/Preferences/com.apple.garageband.plist
    ~/Library/Caches/garageband
    Quit GarageBand, then remove the files to a folder on the Desktop and restart the computer, before trying again to open GarageBand.
    You user library may still be hidden, as is the default in Mavericks: To open your hidden user library:
    Select the "Home" folder icon (the little house)  in the Finder's sidebar and press the key combination ⌘J to open the "view options".
    Enable "Show Library Folder".
    Then open the Home folder and open the Library folder inside and navigate to the Preferences, Caches, or Containers folder. Remove these folders completely - don't leave anything inside:  ~/Library/Containers/com.apple.garageband10/,
    ~/Library/Caches/garageband  .

  • I can't open firefox the running but not responding window opens and says to close the existing window. I can't do that shutting down the computer doesn't do anything to help. I've done all the suggestions here. I've uninstalled and reinstalled firefox

    Firefox will not open. I get the firefox is already running but not responding window... I have tried rebooting with no help. I have tried to end the process via cntrl+shift+esc and nothing firefox is listed to end. I have tried find the app data via the run icon in the start up window, I have no run icon on this system (Acer with windows vista(?)
    == This happened ==
    Every time Firefox opened
    == The computer was hard shut down and did a improper shut down scan when it was restarted ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.0; FunWebProducts; GTB6.5; SLCC1; .NET CLR 2.0.50727; Media Center PC 5.0; .NET CLR 3.5.30729; .NET CLR 3.0.30729)

    I am having a similar problem. Running Xp.
    Latest revision of firefox.
    After using firefox for a while if I exit, parent.lock is locked and i have to reboot to reload firefox.
    I have killed all firefox applications from task manager (usually there are none). and I have tried 3 different "file unlock" programs including unlocker to no avail.
    I also recently installed a program that shows -all- open files, and parent.lock is not listed, and thus not closable/unlockable from there.

  • My problem: can't get Google or Facebook to load on Firefox. Something odd. Other pages load, but not those. I go to open: and I get a blank page and tab that says Untitled. Google was my default page. please help me resolve

    A few minutes earlier this morning, I couldn't get Firefox to load any pages. I was led to one page from this process and I disabled under Add-ons in Tools I disabled the only thing I found --a Google toolbox. and I went back. Tried again, now i get other pages, but not google or facebook. Help please.

    Try clearing your cache
    [[Deleting cookies]]
    [[How to clear cache]]
    Also try running in [[Safe Mode]]
    [[Troubleshooting extensions and themes]]

  • Double-click/Drag-&-drop Photoshop files opens application but not file or I get a message saying that some files in Application Support are missing and I have to reinstall. (Photoshop CS/CS2/CS3)

    This is most commonly due to installing Photoshop CS/CS2 <i>before</i> doing an archive and install of Mac OS10.3 or OS10.4.<br /><br />One solution is to reinstall Photoshop 7/CS/CS3 after you have installed Mac OS10.3 or OS 10.4.<br /><br />If you have Photoshop 7 and 8(CS), the easiest way to reinstall Photoshop (without disturbing the original installation) is to install to your desktop. After the install is done just trash the Photoshop folder on the desktop.<br />Note: This will only work with Photoshop 7 and 8(CS) but not with 9 (CS2).<br /><br />Photoshop CS2 you must delete the Photoshop CS2 folder. If you have any 3rd party Plugins or presets remove them from the folder before deleting. Just placing the folder in the trash will not work it must be deleted. After reinstalling CS2 you can now put all 3rd party Plugins and presets back in the new folder.<br /><br />---------------------------<br />Another solution courtesy Anne Shelbourne<br /><br />Open your Previous System folder. <br />Find "Adobe Unit Types". <br />Copy it into: <Your current system Hard Drive>/Library/ScriptingAdditions/<br />Then reboot your Mac.<br /><br />---------------------------<br />However, if you happen to be running a non-English version, like Photoshop CS CE or Photoshop CS ME, it appears the missing file does not get installed. You would need to install and delete the international English version first.

    The problem you got into is a known problem after updating to Tiger. It is a small 4K file that gets trashed with the update. It is called the Adobe Unit Types. Both Photoshop and Photoshop Elements need this file to function.
    One way to get it back is to reinstall Photoshop, the other is to add this file again.
    You can get the file from here http://www.dd.se/Tips/bildbehandling/downloads/AdobeUnitTypes.zip
    It is only 3,7 KB big.
    You put the file you download here:
    [hard disk] /Library/ScriptingAdditions. If you don't have a Scripting Additions folder, you create it.
    As you trashed Photoshop, you need to completely deinstall it to be able to reinstall it.

  • How can I get ALL of my Google Calendars to show on the iCal on my iPhone? I see all of my Google Calendars on the iCal on my Mac, but I do not see them in the iCal on my iPhone. I only see one Google Cal, but not the others.

    How can I get ALL of my Google Calendars to show on the iCal on my iPhone?
    I see all of my Google Calendars on the iCal on my Mac, but I do not see them in the iCal on my iPhone. I only see one Google Cal, but not the others.

    https://www.google.com/calendar/iphoneselect

  • How do I set upmy Imac to allow using both my computer speakers and a Bose SoundLink system as outputs at the same time.  I can use one or the other, but not both.

    how do I set up my Imac to allow using both my computer speakers and a Bose SoundLink system as outputs at the same time.  I can use one or the other, but not both.  From systems Preferences I must select one or the other.  I want both to work all the time.

    Hi,
    I would recommend you to use 0FI_AP_4 rather using both, particularly for many reasons -
    1. DS: 0FI_AP_4  replaces DataSource 0FI_AP_3 and still uses the same extraction structure. For more details refer to the OSS note 410797.
    2. You can run the 0FI_AP_4 independent of any other FI datasources like 0FI_AR_4 and 0FI_GL_4 or even 0FI_GL_14. For more details refer to the OSS note: 551044.
    3. Map the 0FI_AP_4 to DSO: 0FIAP_O03 (or create a Z one as per your requirement).
    4. Load the same to a InfoCube (0FIAP_C03).
    Hope this helps.
    Thanks.
    Nazeer

  • How-do-i-use apple calaendar to-allow-my-staff-and-i-to-share-calendars-but-not-have-my-alarms-going-off-on- their-ihones

    how-do-i-use apple calaendar to-allow-my-staff-and-i-to-share-calendars-but-not-have-my-alarms-going-off-on- their-ihones
    Really annoying can it be done.?
    Searched everywhere for an answer surely other people have had this problem
    Cheers

    https://discussions.apple.com/message/19818985#19818985

Maybe you are looking for