Illustrator 25% off the time "program not responding" for 35 seconds when network is active

Hi
My Client have 4 computers, all win7, running cs 5 or 6, the newest the cloudbased version.
The problem has been sinc upgrading from cs3.
"Program not responding" for 35 seconds, before loading the file on 1/4 of time.
It is not on specific files, and no patton.
it does'nt matter if the files are on network or saved local on Harddrive.
the sice does'nt matter.
Only switching of nic and wifi stops the problem.
I did try downloading other files (not made by my client), from the net, they do not trigger the problem.
What else then the Files can bee the problem? can anyone test my files to see what is wrong?
BG Allan Tjepp

I have a very similar problem with my CS6 Ai on our company network. I sometimes use Illustrator for image heavy documents less than 10 pages. These have a lot of placed images.
It will freeze, say "not responding" and curser switches to blue spinner. Then about 15 sec later it unfreezes and I can work for another 60 sec or so, then repeat freeze, blue spinner, etc. Very annoying. When i unplug the network LAN cable the problem goes away and I sail along. I have tried relocating the Ai file to my desktop (not sure about the images).
Waiting on any feedback or help, our IS guys are getting stumped. I could switch to InDesign for this work but not my preference.

Similar Messages

Itunes writes off $ 1 each time they connect to the Internet. Shopping at the time was not. For what? How do I know?

Itunes writes off $ 1 each time they connect to the internet. Shopping at the time was not. For what? How do I know?

Itunes writes off $ 1 each time they connect to the internet. Shopping at the time was not. For what? How do I know?

After the new update the FFox is now 11.0. But it's really SLOW always CRASHES and most of the time is NOT RESPONDING. I have to go to CHROME it is working perfectly.

After the new update the FFox is now 11.0. But it's really SLOW always CRASHES and most of the time is NOT RESPONDING. I have to go to CHROME it is working perfectly.

Hey mooshi20003,
Have you tried starting Firefox in Safe Mode? Hold down "shift" while Firefox is starting up. If the crash doesn't happen in Safe Mode, you should read [[Troubleshooting extensions and themes]].
There is also a lot of useful stuff in the [[Firefox crashes]] Knowledge Base article. You might also want to look at our [https://support.mozilla.org/en-US/kb/firefox-slow-or-takes-too-long-start performance troubleshooting section].
Hopefully this helps!

On shut down I always get the message Program Not Responding. This happened before I installed Firefox. It does not pose a problem, that I know of but it does concern me.

On shut down I always get the message Program Not Responding. This happened before I installed Firefox. It does not pose a problem, that I know of, but it does concern me because I always have to End Program manually when I get this message.
== Over a year ago.

Can you attach a screenshot?
*http://en.wikipedia.org/wiki/Screenshot
*https://support.mozilla.org/kb/how-do-i-create-screenshot-my-problem
Use a compressed image type like PNG or JPG to save the screenshot.
Reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
*Press and hold Shift and left-click the Reload button.
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Command + Shift + R" (MAC)
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > Cookies: "Show Cookies"
SeaMonkey

Render Freeze/Crash at the end - program not responding

Hi guys
Im at my end with this problem and would appreciate a solution or explination to the problem im having.
when i render my project for final output it renders all frames and gets to the end on the progress bar but as soon as it seems to finish it freezes. So it does not seem to finalize. (program goes into "not responding") i have left it for up to 4 hours and still it simply hangs. this is happening with all projects and scenes regardless of the resolution or memory allocation.
im running CS4 with windows 7 and have version 9.0.3 of After Effects. im also using the latest optical flares plugin with all updates. my hardware is Intel(R) Core(TM) i7 CPU [email protected] 2.66GHz
insalled RAM is 4GB with 3.24GB usable
32 bit operating system
Graphics card is NVIDIA Ge-Force GTX285 with 2GB of independant memory
Please help me find some path to solve this problem
thank you

With only 4 GB RAM, you shouldn't be using multiprocessing. If it's on, turn it off. If you're using Open GL to accelerate rendering, turn that off too: it rarely helps, and often hurts. Your problem might be solved that easily.
But since you're on AE 9, it the footage you use could also be the problem. Most commonly it would be footage from XDCams, HDV cameras and DSLRs. AE 10 solved the problem, but that won't help you right now. However, a reply I used to give all the time on the Creative COW may still still apply:
Dave's Stock Answer #1:
If the footage you imported into AE is any kind of the following -- footage in an HDV acquisition codec, MPEG1, MPEG2, AVCHD, mp4, mts, m2t, H.261 or H.264 -- you need to convert it to a different codec.
These kinds of footage use temporal, or interframe compression. They have keyframes at regular intervals, containing complete frame information. However, the frames in between do NOT have complete information. Interframe codecs toss out duplicated information.
In order to maintain peak rendering efficiency, AE needs complete information for each and every frame. But because these kinds of footage contain only partial information, AE freaks out, resulting in a wide variety of problems.
I'm a Mac guy, so I like to convert to Quicktime movies in the Animation or PNG codecs; both are lossless. I'll use Apple's Compressor, Adobe Media Encoder or Quicktime Pro to do it.

Why Why Why didn't i get warned about some of my super used all the time programs not working with Lion? I am so sad. What can i do about it besides buying upgrades for all the programs??

I am so upset because i didn't research enough before upgrading to Lion. I can't use a lot of my pograms i used all the time now. I want to go back to where i was before Lion. Is there a way to do it without costing me more money?

I didn't say the price was necessarily a drawback; just thought I'd throw my two cents in if the OP didn't want to purchase more software (as he/she alluded to in the first post). Even if it's a small cost (in your opinion), the OP said they didn't want to spend any more money. I didn't think about buying it on ebay; but that's a good idea. Just keep in mind that the Parallels free phone support is only good for the first few months after purchasing a new copy, so if you're buying a used copy, you won't get free phone tech support. I think they have per-incident support once the free period is over, though. And they probably have forums you can use to troubleshoot any issues.
Parallels can also cause a slow/laggy OS, which could be seen as a drawback. Of course, you could always purchase more RAM if the computer does lag, but there's another cost. I'm sure it doesn't happen to everyone, but it can happen, that I've seen. Especially if the computer you install it on is an older one that barely meets the Lion system requirements to begin with.
I agree with you; I purchase hardware and software for the future. If my new iMac won't run software from 2004-2008, I guess I'm upgrading. I understand when people don't want to upgrade, but after so many years, it's not really a choice.
I prefer the dual-boot method; it's cleaner (in my experience) than a virtual machine software program, and causes fewer issues with the main OS installation. It's really just preference, though. The OP can try both ways and decide which is preferable for him/her.
What I posted was (as I said in my first post) just my suggestion. I wasn't trying to override what you said about Parallels being the answer; just adding a new answer that I didn't yet see in this thread, in case the OP wanted an alternative. Maybe I mis-read the defensive attitude in your post, and if so, I apologize. But you seemed to be defending something that I wasn't truly even attacking to begin with. I feel that the best choices are the most informed ones, and with more options, the OP can find the best answer for him/her.
Have a nice day!

Satellite A660 - program not responding for a mili-second

Hi,
Sometimes the program I am using flashes into a non-resonsive mode.
For a milli-second or so the program stops and the desktop image appears then disappears again.
Sometimes it happens only once but in some programs it happens continually and they become impossible to use.
I have a A660 running Windows 7, 32bit with an intel i7.
I have loaded all the latest upgrades for the graphics card and drivers.
Has anyone else had this problem?
Thanks

Hi mate
This is ok.
You will always notice an delay while loading some software or applications.
This happens because software is loading in RAM.
It depends also on processes which are running in the background.
The background processes can stress the CPU and this can affect the app execution or can lead to some short delays
To improve this, i recommend cleanning the OS using CCleaner and to disable some porocesses which are not really important for you.
You can do this is msconfig

What is wrong when an IPad 2 can receive Facetime calls but always receives the message that the party "Is not available for calls" when placing an outgoing call?ll

What is wrong when an IPad 2 can receive Facetime calls but always gets the message "Party is unavailable" when placing an outgoing call?

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
http://tinyurl.com/32drz3d
 Cheers, Tom

Multiple programs not responding

Hi ,
I'm having a problem with my imac when i log in everything freezes up i have managed to get the activity monitor working before mail and safari get stuck with the dreaded spinning ball ( they both open at log in ) .The monitor eventually comes up with the message program not responding.when I click on the finder it also comes up as not responding and I have to switch off with the power button. I have logged on in safe mode and gone into disk utility and there is no problem with the hard drive i have also repaired disk permissions and i am still having the same problem. When i log into my wifes account everything is working fine .I was wondering if anyone could help me!

Hi ...
User specific troublehooting help here > Isolating an issue by using another user account

Hi, I got the problem with Firefox 27.0.1. I can not run Selenium on Firefox after login a website for automation testing. The browser is not responding.

Hi, I got the problem with Firefox 27.0.1. I can not run Selenium on Firefox after login a website for automation testing. The browser is not responding. However when I close Nunit, the page is back to be normal. The title is returned to the name of website without "not responding". I sure this problem did not happen on Firefox version 26. I just got this problem when firefox upgrading automatically to version 27. Please help me fix this problem because it is very important for my work. If you need more information pls send your concerns via my email address.
Thanks so much

Hi, the work around suggested above should put you in working mode in the meantime. However to help investigate the issue it is possible to analyze what is not loading or taking a long time by analyzing the network traffic or http headers of the Nunit web page.
*[https://addons.mozilla.org/en-us/firefox/addon/live-http-headers/]
*Web developer Tools > Web console
If you post the results with out the user data, we are happy to help.

Itunes Program Not Responding when updating ipod

my ipod will update about.. 20 songs, and then it will freeze, getting the "This program not reponding" message. When i turn my ipod on, it didnt update the songs it says it updated. it usually stops on one song, i dunno why

Try to go therough this article and see if any of those steps help you
http://docs.info.apple.com/article.html?artnum=302856

Help with the program not responding error

I just joined the CC and in Illustrator I keep getting "program not responding" please advise,
Eleanor

Do you have Tahoma and Verdana fonts enabled on your system?
Also see this other relevant link:
http://forums.adobe.com/thread/1309484
Nancy O.

I get program not responding every time I try to use new Garageband

I get program not responding every time I try to use new Garageband

I mean the program will open, but when asked to open anything it just sets with the rainbow pie spinning. Click on garageband in the dock and it says that is not responding.

"Program Not Responding" and cannot shutdown the computer? Help?

I have a TouchSmart tx2, upgraded from Vista to Win 7 Ultimate, 32-bit. The BIOS version is F.03, Released 2008 11 25. My computer will not shut down...I get a blank screen and the constant whirrrrrr of the hard drive but it will not shut down and I am forced to do a hard shut down and restart in SAFE mode. Further, I get the "Program not responding" problem 6 to 7 times a day while running Outlook, and several other programs. I'm not sure what to do at this point? Help?

Same problem here since an upgrade to the recent xbmc version.
- hal removed
- udisks and upower installed
- my user is in the 'power' group
I start X via /etc/inittab:
x:5:respawn:/bin/su lynix -l -c "/bin/bash --login -c 'startx xbmc'>/dev/null 2>&1"
and my .xinitrc is:
#!/bin/sh
nvidia-settings -l
if [ "$2" == "xbmc" ]; then
# start XBMC
exec ck-launch-session /usr/bin/dbus-launch --exit-with-session /usr/bin/xbmc --standalone -fs --debug &>$HOME/.xsession-errors
else
# start openbox session
exec ck-launch-session openbox-session &>$HOME/.xsession-errors
fi
Any hints what could be wrong?

This item could not be crawled because the repository did not respond within the specified timeout period. Try to crawl the repository at a later time, or increase the timeout value on the Proxy and Timeout page in search administration. You might also wa

HI,
I got the error message in the crawl log as below after performing the Full Crawl
This item could not be crawled because the repository did not respond within the specified timeout period. Try to crawl the repository at a later time, or increase
the timeout value on the Proxy and Timeout page in search administration. You might also want to crawl this repository during off-peak usage times.
To overcome the above error,many forums have suggested me to increase the time out which is under Farm level settings.But if time out gets increased,performance impacts as well.
So please suggest me to overcome this error without increasing the timeout.Thanks in advance
Regards,
Sudheer
Thanks & Regards, Sudheer

Hi,
I understand that you get the error message when performing a full crawl. I have seen similar cases caused by IE proxy settings. You can try to edit the Internet Options>Connections>LAN settings. Uncheck ‘Automatically detect settings’.
For more information, please refer to this site:
Search error: crawler could not connect to the repository:
http://social.technet.microsoft.com/forums/en-US/sharepointadminprevious/thread/c230ab36-8d0b-4c25-bf86-33136d17642b/
Thanks,
Entan Ming
Entan Ming
TechNet Community Support

Illustrator 25% off the time "program not responding" for 35 seconds when network is active

Similar Messages

Maybe you are looking for