Illustrator 9.0 on a Windows 7 system

My old computer (an XP system with Illustrato 9.0 installed) crashed last week. I reinstalled Illustrator on my new Windows 7 system, and the installation seemed to go OK. Tonight when I tried to open one (any) of my .AI files, or just start up Illustrator, I get an error stating
"The filter cannot complete becuase of an unknown error.
Error: !MEM"
Don't know if this is just a case of a file moved/missing, or a more serious problem. I really can't afford to upgrade right now (unemployed) but I do need to be able to work on the files. Help/suggestions?

No, it won't work. Those old programs cannot deal with the memory management in more current operating systems. the first tested and certified version for Win 7 is CS4.
Mylenium

Similar Messages

Illustrator CC crashes on startup(windows event viewer message included)

Windows event viewer shows like this...
System
Provider
[ Name]
Application Error
EventID
1000
[ Qualifiers]
0
Level
2
Task
100
Keywords
0x80000000000000
TimeCreated
[ SystemTime]
2013-12-09T06:35:08.000000000Z
EventRecordID
71639
Channel
Application
Computer
HPNB-dhleeNB
Security
EventData
Illustrator.exe
17.0.0.260
52822426
ntdll.dll
6.1.7601.18247
521ea8e7
c0000374
000ce753
a690
01cef4a8afb2dd09
C:\Program Files (x86)\Adobe\Adobe Illustrator CC\Support Files\Contents\Windows\Illustrator.exe
C:\Windows\SysWOW64\ntdll.dll
0b8a3ab7-609c-11e3-8e0d-005056c00008
Please help.

Problem solved.   Refer to below.
3 posts
Nov 25, 2013
2.AlanDrVita,
Nov 26, 2013 9:16 AM   in reply to outdoorz
Report
I may have been able to resolve my issue. I held shift while opening Illustrator and opened it in a bare bones mode, then closed it and reopened it without getting the error message. Good luck to you.
Was this helpful? Yes   No

How can I install the free version of adobe illustrator in a PC with Windows Vista?

How can I install the free version of adobe illustrator in a PC with Windows Vista? When i try the program says that i haven't suitable system requirements

Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5.5, 5 | 1
Contribute: CS5 | CS4, CS3 | 3,2
FrameMaker: 12, 11, 10, 9, 8, 7.2
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

How to get Illustrator 10 to run on windows 7 ultimate and not in XP mode?

I have been running Illustrator 10 on windows 7 pro with no problems. I upgraded to a new computer with windows 7 Ultimate and Illustrator will only run in XP mode. It will not open my existing files stating that they were created in a newer version.
How can Illustrator be run in windows 7 Ultimate?

Actually, if you go to the program .exe file (usually in Program files(x86)\Adobe\Illustrator 10\Support Files\Contents\Windows).
Right click on it and select properties.
Select the Compatibility tab.
In the section "Compatibility mode".
Check the box "Run this program ...."
From the dropdown list select Windows 7
In the "Settings" section
Check "Disable visual themes" and "Disable desktop composition"
This will allow Illustrator to run normally in Windows 7 Pro and Ultimate 64bit systems.

Thinking of purchasing Illustrator 10 - what are the Mac system requirements

Thinking of purchasing Illustrator 10 - what are the Mac system requirements. I have a G4 10.4 and a MacBook Pro OSX 10.9 Maverick!

Hi, welcome to the forum.
tmarie1 wrote: Thinking of purchasing Illustrator 10 - what are the Mac system requirements. I have a G4 10.4 and a MacBook Pro OSX 10.9 Maverick!
Did you actually mean version 10, as in Illustrator 10 from 2001?
If so:
• Your G4 with OS X 10.4 (2005-2007) would probably run it, (using Rosetta if needed / PPC based).
• OS X 10.9 will definitely not allow install or run it.
Illustrator 10: System Requirements
• Macintosh: Power PC Processor G3, G4, or G4 dual; Mac OS software 9.1, 9.2 or Mac OS X 10.1; 128 MB Ram; 180 MB available disk space; For Postscript printing, printers capable of Adobe PS levels2 or 3.
• Windows: Intel Pentium II and above; Windows 98 and above; 128 MB Ram; 180 MB available disk space; For Postscript printing, printers capable of Adobe PS levels2 or 3.

InDesign crashes every time you double click to open an .indd file on Windows system

InDesign crashes every single time you double click to open an InDesign file and has done so since replacement of the original version of InDesign introduced in the Creative Cloud launch. Does anyone else have this problem? I'd say it was unique to my system if I hadn't experienced the issue repeatedly on several different systems now. You have to relaunch InDesign which then opens the file from recovery, so it saw the file you tried to launch in the first place. This leads me to believe the problem lies with the file association registry of InDesign inside Windows systems. I find it unbelievable that this problem still exists and remains unreported and that a solution hasn't been implemented by Adobe to rectify the issue.
The double click is a fundamental tenant of opening files on a Windows system in the same way a single click is on a Mac. Does InDesign crash ever time a Mac user clicks to open their files, I think not.
Anyone got any ideas other than the obvious which is Adobe actually got their figure out and fixed it.
Cheers,
Pat Doyle

Hi Michael,
I'll give it a go. Don't really like messing with the registry on Windows boxes. Yes you can do it, but it can end up being a case of the operation was a success, but the patient died.
Just was rather hoping someone else had already experienced this problem and posted the registry tweak. Didn't want spend hours reinventing the wheel. Not because I'm lazy, but I have so many demands on my time that resolving a minor issue that effects me only seems like it should be pretty low priority.
The system I'm using is brand new, but the problem seems to have followed me regardless which may indicate that it is seated in my synchronization information somehow. Really don't know how that could happen as I'm not an Adobe engineer or have the remotest idea where to even start looking. So I think I'll mark your suggestion as the "Answer" and just learn to live with it.
Windows eh! Can't live with - can't live without it. I'm sure Mac can be just as temperamental. Just have to chalk this one up as being just another ghost in the machine.
Thanks for all the advice you have kindly offered, much appreciated.
Cheers,
Pat Doyle

NO java control panel in windows system control window

Hello together,
there seems to be a bug/feature (?) not allowing me to use the plugin functionality of my J2EEsdk-1_4
Situation:
Before i installed the J2EE i had an already installed java plug-in 1_4_2 working fine on
my Laptop giving my ms explorer 6.0 the Java VM needed. To avoid conflicts, i deinstalled
this plug-in, before i installed the J2EE 1_4_2. The result was disapointing.
There was NO java control panel in the windows2000 system control window after installing J2EE.
There was no corresponding registration key in the registry anymore.
Additionally there was no java related entrance to be seen anymore in the advanced internet and
security options of my ms explorer 6.0.
i have have found several trouble reports mentioned similar problems during the last months but unluckily
no solution working for me.
i did several tests with different java packages i downloaded today to get the actual versions
First:
i deinstalled the J2EE (not to get version conflicts) and installed the Java Plug-in 1.4.2 again.
This was proposed from ms explorer, when i tried to open an internet page with javaplugins included.
This plugin worked fine again. I could see and use the java panel and it enabled
my explorer to use the java plugin.
Second:
i deinstalled the Java Plugin and installed the J2sdk_1_4_2 instead.
The java plugin which is part of this package also worked fine.
Third:
i deinstalled the J2sdk_1_4_2 and installed the J2EEsdk-1_4-windows.exe.
the same misbehaviour as mentioned before. No java panel icon can be seen
in the windows system control, now registration......
as a workaround i have installed now both, the J2eesdk (i want to learn about)
and some additonal 100 MB java plug-in to enable my MS explorer to display
java applets again.
This is working fine again, but i really would prefer to have no need for two JREs.
By the way:
When i first opened the java control panel of the Plug-in and deactivated the update
mechanism , this plugin got really angry immedialtely afterwards. As a result my
laptop rebooted without coming up again. i had to initiate another hard reboot to get
windows back
i really would like to know , whats wrong me or the J2ee and i apriciate
any hint.
Best regards: yours aspirant

One thing you could do if you by all means want to have only one single copy of 1.4.2 on your system is to install standalone J2SE 1.4.2 (this will accomodate your Java console and browser plugin requirements) and then install Application Server only distribution (on the download page this is referred to as "Sun Java System Application Server Platform Edition 8") and sample applications set ("J2EE 1.4 SDK Samples "). In this way you get full content you would get in J2EE 1.4 SDK and all the benefits of standalone J2SE 1.4.2 installation.
This is obviously more convoluted at installation time since there are 3 separate things to install, but it would seem to fit your requirements.
Hope this helps...

Trying to Create a Catalog file using WSIM (Windows System Image Manager)

I have been looking online for a solution to htis problem for days and come up with nothing so any help would be amazingly helpful.
I have created a Windows 8.1 image which I would like to role out to all users within my company but when trying to create a catalog file I am getting an erorr message saying "Windows SIM was unable to generate a catalog." It says "Mounting
Windows Image file......This might take a few minutes" and then fails after 6-7mins.
When opening the log file I get this:
10:00 : Cannot obtain read/write access for F:\sources\install.wim.
In order to generate a catalog file, you must have read/write access to the Windows image file and its containing folder.
10:13 :
10:13 : Windows SIM was unable to generate a catalog. For troubleshooting assistance, see the topic: 'Windows System Image Manager Technical Reference' in the Windows OPK or Windows AIK User's Guide.
10:13 :
10:13 : System.InvalidOperationException: The operation failed to complete. ---> System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.ArgumentNullException: String reference not set to
an instance of a String.
Parameter name: source
   at System.Globalization.CompareInfo.IsPrefix(String source, String prefix, CompareOptions options)
   at ?A0xfe36268f.ConvertToNtPath(String path)
   at Microsoft.ComponentStudio.ComponentPlatformInterface.CbsSessionAdaptor..ctor(String bootDrive, String imageWinDir, String servicingPath)
   at Microsoft.ComponentStudio.ComponentPlatformInterface.OfflineImageImpl.InitializePackages()
   at Microsoft.ComponentStudio.ComponentPlatformInterface.OfflineImageImpl..ctor(OfflineImageInfo imageInfo)
   --- End of inner exception stack trace ---
   at System.RuntimeMethodHandle._InvokeConstructor(Object[] args, SignatureStruct& signature, IntPtr declaringType)
   at System.Reflection.RuntimeConstructorInfo.Invoke(BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
   at System.RuntimeType.CreateInstanceImpl(BindingFlags bindingAttr, Binder binder, Object[] args, CultureInfo culture, Object[] activationAttributes)
   at Microsoft.ComponentStudio.ComponentPlatformInterface.Cpi.PlatformImplementation.CreateOfflineImageInstance(OfflineImageInfo imageInfo)
   --- End of inner exception stack trace ---
The one image that did work (LiteTouchPE_x64.wim) was from the OS I imported to Microsoft Workbench but the components are different to any that I have seen online when looking on how to do this.
I have made sure that the architecture is x64 and tried from ISO files I have on the system already but get the same error.
This is the first project I have been involved in and only ever done IT support before this.
Thanks for your help in advance.

Yes I am trying to capture a reference image that I have created on another machine and then reploy this through MDT. I am trying to open the Unattend.xml file because the "Capture and Sysprep" fails on the reference machine when trying to run
Sysprep. When I try to open the Unattend.xml file in MDT I get the error below:
Performing operation "generate" on Target "Catalog".
Starting: "C:\Program Files\Microsoft Deployment Toolkit\Bin\Microsoft.BDD.Catalog35.exe" "D:\Windows8.1 TEST3\Operating Systems\Windows8.1 x64\Sources\install.wim" 1 > "C:\Users\*****\AppData\Local\Temp\3\Microsoft.BDD.Catalog.log"
2>&1
No existing catalog file found.
PROGRESS: 0: Starting.
PROGRESS: 0: Creating mount folder: C:\Users\*****\AppData\Local\Temp\3\IMGMGR_install_Windows 8.1 Enterprise_njegg3ph.con.
PROGRESS: 5: Creating temp folder: C:\Users\*****\AppData\Local\Temp\3\IMGMGR_install_temp_qj0x3ga5.obv.
PROGRESS: 10: Mounting Windows image: D:\Windows8.1 TEST3\Operating Systems\Windows8.1 x64\Sources\install.wim. This might take a few minutes.
ERROR: Unable to generate catalog on D:\Windows8.1 TEST3\Operating Systems\Windows8.1 x64\Sources\install.wim: System.ComponentModel.Win32Exception: The process cannot access the file because it is being used by another process
   at Microsoft.ComponentStudio.ComponentPlatformInterface.WimImageInfo.PreCreateCatalog()
   at Microsoft.ComponentStudio.ComponentPlatformInterface.OfflineImageInfo.CreateCatalog()
   at Microsoft.BDD.Catalog.Program.DoCatalog()
Non-zero return code from catalog utility, rc = 2002

How can I install photoshop elements on a 64 bit windows system?

How can I install photoshop elements on a 64 bit windows system?

You just use the appropriate install disk/ download. See this:
Install Premiere Elements, Photoshop Elements
Or are you asking about some specific procedures?
Mylenium

System.ArithmeticException by Windows.System.Display.DisplayRequest.RequestRelease()

Could anyone shed some light on whey Windows.System.Display.DisplayRequest.RequestRelease()
occasionally throws System.ArithmeticException?
The error message is: Overflow or underflow in the arithmetic operation.
Hong

Hello,
I think we will need a lot more information to be able to really help you. A dump file would be a good place to start.
That said my first guess is that the internal reference counter is underflowing because you have more releases than requests. I would start by instrumenting your code and making sure you have exactly the same number of requests as you do releases.
I hope this helps,
James
Windows SDK Technologies - Microsoft Developer Services - http://blogs.msdn.com/mediasdkstuff/

Error while integrating Windows System - Share into KM

Hi Experts,
I am new to KM and there is a requirement of Integrating Windows System into KM.
Portal System : a.xyz.com
Remote System: b.xyz.com
Share -
b.xyz.com\d_share$
Both systems reside in the same domain and share is created on the remote system which needs to be accessed from Portal. User xyz\Rob has given R/W access to the share.
The steps I followed are:
1. Created a Network Path.
    - Specified Network Path as given above.
    - Added credentials for xyz\Rob
2. Created Windows System in KM Systems Landscape.
3. Created File System Repository.
    - Specified Share as Root Direcory.
    - Specified Windows Landscape System as the system defined in the above step.
    - Security Manger as W2kSecurityManager
Now when I saved it, default trace logs are giving following dump :
#1.5 #000E0CB1BAAE005E0000000E000017F000046821B68B46BA#1240393912559#com.sapportals.wcm.service.fsmount.FSMountService#sap.com/irj#com.sapportals.wcm.service.fsmount.FSMountService#Guest#0##n/a##4bd037e02e7211dec03e000e0cb1baae#Thread[ConfigurationEventDispatcher,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Error##Plain###Error mounting drive ,path \\\\b.xyz.com\\d_share$#
#1.5 #000E0CB1BAAE005E0000000F000017F000046821B68B617E#1240393912575#com.sapportals.wcm.service.fsmount.FSMountService#sap.com/irj#com.sapportals.wcm.service.fsmount.FSMountService#Guest#0##n/a##4bd037e02e7211dec03e000e0cb1baae#Thread[ConfigurationEventDispatcher,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Warning##Plain###FSMountService Reconfiguration (New path) failed to mount network path \\\\b.xyz.com\\d_share$ - com.sapportals.wcm.service.fsmount.RemoteAccessException: Error Mounting Drive: \\\\b.xyz.com\\d_share$
     at com.sapportals.wcm.service.fsmount.FSMountService.mountDrive(FSMountService.java:91)
     at com.sapportals.wcm.service.fsmount.FSMountService.updateConfigurables(FSMountService.java:346)
     at com.sapportals.wcm.service.fsmount.FSMountService.reconfigure(FSMountService.java:286)
     at com.sapportals.wcm.crt.CrtThreadSafeComponentHandler.tryToReconfigure(CrtThreadSafeComponentHandler.java:302)
     at com.sapportals.wcm.crt.CrtThreadSafeComponentHandler.handleReconfigure(CrtThreadSafeComponentHandler.java:148)
     at com.sapportals.wcm.crt.CrtComponentManager.reconfigureComponent(CrtComponentManager.java:343)
     at com.sapportals.wcm.crt.CrtConfigurationEventListener.notifyComponentConfigChanged(CrtConfigurationEventListener.java:79)
     at com.sapportals.wcm.repository.runtime.CmConfigurationProvider.sendChangeEvent(CmConfigurationProvider.java:1257)
     at com.sapportals.wcm.repository.runtime.CmConfigurationProvider.sendChangeEventOrRestart(CmConfigurationProvider.java:1209)
     at com.sapportals.wcm.repository.runtime.CmConfigurationProvider.configEvent(CmConfigurationProvider.java:302)
     at com.sapportals.config.event.ConfigEventService.dispatchEvent(ConfigEventService.java:227)
     at com.sapportals.config.event.ConfigEventService.configEvent(ConfigEventService.java:112)
     at com.sapportals.config.event.ConfigEventDispatcher.callConfigListeners(ConfigEventDispatcher.java:308)
     at com.sapportals.config.event.ConfigEventDispatcher.flushEvents(ConfigEventDispatcher.java:251)
     at com.sapportals.config.event.ConfigEventDispatcher.run(ConfigEventDispatcher.java:110)
#1.5 #000E0CB1BAAE005E00000010000017F000046821B68B6F1C#1240393912575#com.sapportals.wcm.service.fsmount.FSMountService#sap.com/irj#com.sapportals.wcm.service.fsmount.FSMountService#Guest#0##n/a##4bd037e02e7211dec03e000e0cb1baae#Thread[ConfigurationEventDispatcher,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Warning##Plain###FSMountService Reconfiguration failed to get configuration of network path CaesarNetworkPath - com.sapportals.wcm.service.fsmount.RemoteAccessException:
     at com.sapportals.wcm.service.fsmount.FSMountService.updateConfigurables(FSMountService.java:351)
     at com.sapportals.wcm.service.fsmount.FSMountService.reconfigure(FSMountService.java:286)
     at com.sapportals.wcm.crt.CrtThreadSafeComponentHandler.tryToReconfigure(CrtThreadSafeComponentHandler.java:302)
     at com.sapportals.wcm.crt.CrtThreadSafeComponentHandler.handleReconfigure(CrtThreadSafeComponentHandler.java:148)
     at com.sapportals.wcm.crt.CrtComponentManager.reconfigureComponent(CrtComponentManager.java:343)
     at com.sapportals.wcm.crt.CrtConfigurationEventListener.notifyComponentConfigChanged(CrtConfigurationEventListener.java:79)
     at com.sapportals.wcm.repository.runtime.CmConfigurationProvider.sendChangeEvent(CmConfigurationProvider.java:1257)
     at com.sapportals.wcm.repository.runtime.CmConfigurationProvider.sendChangeEventOrRestart(CmConfigurationProvider.java:1209)
     at com.sapportals.wcm.repository.runtime.CmConfigurationProvider.configEvent(CmConfigurationProvider.java:302)
     at com.sapportals.config.event.ConfigEventService.dispatchEvent(ConfigEventService.java:227)
     at com.sapportals.config.event.ConfigEventService.configEvent(ConfigEventService.java:112)
     at com.sapportals.config.event.ConfigEventDispatcher.callConfigListeners(ConfigEventDispatcher.java:308)
     at com.sapportals.config.event.ConfigEventDispatcher.flushEvents(ConfigEventDispatcher.java:251)
     at com.sapportals.config.event.ConfigEventDispatcher.run(ConfigEventDispatcher.java:110)
#1.5 #000E0CB1BAAE005E00000011000017F000046821B68B72C8#1240393912575#com.sapportals.wcm.service.fsmount.FSMountService#sap.com/irj#com.sapportals.wcm.service.fsmount.FSMountService#Guest#0##n/a##4bd037e02e7211dec03e000e0cb1baae#Thread[ConfigurationEventDispatcher,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Warning##Plain###FSMountService Reconfiguration Failed to get configuration on network paths to mount - com.sapportals.wcm.service.fsmount.RemoteAccessException:
     at com.sapportals.wcm.service.fsmount.FSMountService.updateConfigurables(FSMountService.java:359)
     at com.sapportals.wcm.service.fsmount.FSMountService.reconfigure(FSMountService.java:286)
     at com.sapportals.wcm.crt.CrtThreadSafeComponentHandler.tryToReconfigure(CrtThreadSafeComponentHandler.java:302)
     at com.sapportals.wcm.crt.CrtThreadSafeComponentHandler.handleReconfigure(CrtThreadSafeComponentHandler.java:148)
     at com.sapportals.wcm.crt.CrtComponentManager.reconfigureComponent(CrtComponentManager.java:343)
     at com.sapportals.wcm.crt.CrtConfigurationEventListener.notifyComponentConfigChanged(CrtConfigurationEventListener.java:79)
     at com.sapportals.wcm.repository.runtime.CmConfigurationProvider.sendChangeEvent(CmConfigurationProvider.java:1257)
     at com.sapportals.wcm.repository.runtime.CmConfigurationProvider.sendChangeEventOrRestart(CmConfigurationProvider.java:1209)
     at com.sapportals.wcm.repository.runtime.CmConfigurationProvider.configEvent(CmConfigurationProvider.java:302)
     at com.sapportals.config.event.ConfigEventService.dispatchEvent(ConfigEventService.java:227)
     at com.sapportals.config.event.ConfigEventService.configEvent(ConfigEventService.java:112)
     at com.sapportals.config.event.ConfigEventDispatcher.callConfigListeners(ConfigEventDispatcher.java:308)
     at com.sapportals.config.event.ConfigEventDispatcher.flushEvents(ConfigEventDispatcher.java:251)
     at com.sapportals.config.event.ConfigEventDispatcher.run(ConfigEventDispatcher.java:110)
I have gone through the help.sap.com documentation but I found it quite confusing.
Please suggest.
Br,
Nilz

Hi,
Check whether you are able to access the same file share form the Portal server where your J2EE is installed.
And also if you have used
b.xyz.com
d_share in the network path try using //b.xyz.com/d_share in the network path as mentioned here.
https://www.sdn.sap.com/irj/scn/thread?messageID=1283643
Regards
~Hussain

How do I permanently delete music files from itunes AND my computer (without going to the folder to delete each item)? It's a windows system. I've tried 'reset all dialogue warnings' as I've been told to do but no luck. Files are still in Itunes folders.

How do I permanently delete music files from itunes AND my computer (without going to the folder to delete each item)? It's a windows system. I've tried 'reset all dialogue warnings' as I've been told to do but no luck. Files are still in Itunes folders. I would really appreciate help!

Solved! Music was in Itunes folder but not in Media folder within that. It doesn't seem like a very user friendly system so far!

In windows system events observed below bugcheck at the time of restart. Error _02/08/2015 11:27:58 _BugCheck _none _0x00000050 (0xfffff8a01cba4000, 0x0000000000000000, 0x... _1001

In windows system events observed below bugcheck at the time of restart.

Hi,
It seems to be a system crash issue, we need to analyze the crash dump file to narrow down the root cause of the issue. Unfortunately, it is not effective for us to debug the crash dump file here in the forum. I would like to suggest that you contact Microsoft
Customer Service and Support (CSS) via telephone so that a dedicated Support Professional can assist with your request.
To obtain the phone numbers for specific technology request please take a look at the web site listed below:
http://support.microsoft.com/default.aspx?scid=fh;EN-US;OfferProPhone#faq607
Best Regards,
Mandy
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

How to install forms 6i runtime using windows Systems Management Server?

Hi,
Our clinents are using oracle forms 5 application and we want to upgrade to forms 6i ( client /server ).
How to install oracle forms 6i and reports 6i runtime in multiple client machines
using windows systems management server instead of installing one by one manually.
Regards

Here is a quick summary on why this works...
The Problem:
The issue relies with the method and logic that MDT’s scripts use to query and validate that the proper disks, partitions and storage space reside before starting the installation of Windows.
Essentially what you have configured in the Task Sequence and the UNATTEND.xml is analyzed by the MDT scripts then a validation is completed against the hardware in which you wish to install Windows
on and if there are any errors you will be prompted with MDT Error or Warning dialogs.
The problem is that the MDT scripts use WMI to query the hard disk, partition and free space requirements for Windows, but in the case of using GPT disk, the 2nd partition (MSR) that you have to create
is hidden. The class that WMI uses for its query can’t see the MSR partition so instead of 3 partitions, it returns 2 in the query results; hence why DISK 0 PARTITION 3 doesn’t work as mentioned earlier when configured in the MDT Task Sequence.
Although the above still confuses me as to why it works with DISK 0 PARTITION 2 since the WMI query results return PARTITION IDs 0 and 1 when it should return 1 and 2…
The Windows Pre-Installation Environment however does see all 3 partitions correctly and we tried configuring in our Task Sequence to install Windows to DISK 0 and PARTITION 2 and in the UNATTEND.xml
file to install Windows to DISK 0 and PARTITION 3 but due to timing issues of the way Windows installs with MDT, did this not work for us.

I have my iPhone 4s backed up on my mac but it seems it was encrypted with a password which i do not remember is there any other option to retrieve to the backup without restoring the device as a new one. Also I do not have access to a windows system.

I have my iPhone 4s backed up on my mac but it seems it was encrypted with a password which i do not remember is there any other option to retrieve to the backup without restoring the device as a new one. Also I do not have access to a windows system.

Sorry no, if you don't knnow the encrypted password, then you can't use that backjup.

Search help - window system type

When clicking on a search help button, in the ABAP WebDynpro application, the user has the following error:
"Sending of dynpro SAPLSZA1 0201 not possible: No window system type specified".
Please, what could be causing this error?
Thanks

Hi Hari,
not yet.
I am sending for QAS the configuration with the Search help KRED_C, and lets see what happens.
What I think is that there is some EXIT implementation in one of the underlying Search Helps of the KRED, once it is a Collective Search Help.
As I found in the SDN, "Search help exits containing dynpro-specific functions, for example, CALL SCREEN, are not supported.".
see http://help.sap.com/saphelp_nw04s/helpdata/en/47/9f724642314aabe10000000a42189b/content.htm
I hope it helps.
Regards.

Illustrator 9.0 on a Windows 7 system

Similar Messages

Maybe you are looking for