Illustrator and InDesign creating unknown files when exporting and saving. MAC CS5

Hi,
I assist a small business with IT and recently (a month or so) strange files have begun appearing in two different circumstances. As a little bit of background, our usual designer recently went on holiday to Japan so we had a temp working with us, it is possible she as fiddled with some settings.
1. When Exporting to PDF using InDesign, a folder is created named $esnp that contains a collection of files roughly 8mb in size.
*.pdf$P1O0 - 4kb
*.pdf$T - 20kb
*.pdf$W214 - 317kb
*.pdf$V429 - 1,270kb
*.pdf$W429 - 1,270kb
*.pdf$W858 - 5,083kb
2. When Saving as EPS from Illustrator, a folder is created named $esnp collection roughly 8mb
*.eps$P1O0 - 6kb
*.epsf$T - 20kb
*.eps$W214 - 317kb
*.eps$V429 - 1,268kb
*.eps$W429 - 1,268kb
*.eps$W858 - 5,078kb
Any help would be greatly appreciated.
Thanks,
Michael Gill

due to virus or trojan problem might be possible

Similar Messages

Firefox and Thunderbird creates CGLog files in /tmp on my Mac. It contains a lot of info related to keyboard and mouse (keys, scrolls, clicks!) I am concerned!

These files mostly contains following lines:
Firefox and Thunderbird creates CGLog files in /tmp on my Mac. It contains a lot of info related to keyboard and mouse (keys, scrolls, clicks!) I am concerned!
--- flushing event log at XXXX.XXXXXXXX ---
432138.5090574 (Firefox): CGSGetNextEventRecordInternal: XXXX.XXXXXX loc (-XXXX, XXXX) conn 0xXXXXX MouseMoved win 0xXXXX (click 1)
and the most scaring:
XXXX.XXXXX (Firefox): CGSGetNextEventRecordInternal: XXXX.XXXXX loc (xxx.xx, xxx.xx) conn 0xXXX KeyDown win 0x0 flags 0xa00100 set 252 char 63233; key 125 data -2303 special 0 repeat 0 keybd 44
Why it happens? Is it dangerous? How can I turn it off?
I saw that on the latest Firefox release for Mac and on Firefox ESR 31.2.0 for Mac
I saw that on Thunderbird release for Mac 31.2.0

You can start with this;
'''[https://support.mozilla.org/en-US/forums/support-forum-contributors/710576 Possible Mal-Ware Scan For Macs]''' {web link}

I want to export a vcard from contacts but when I do it doesn't give me the next step of saving the file anywhere and if it automatically creates a file, where is it saved?

i want to export a vcard from contacts but when I do it doesn't give me the next step of saving the file anywhere and if it automatically creates a file, where is it saved?

its from icloud contacts. I select all and then go to export to a vcard and then nothing happens.

After the latest Security Update 2012-001 (Mac OS X 10.6.8) my Adobe Photoshop CS 8, Dreamweaver 8, and InDesign CS programs crash when I try to save a file.

After the latest Security Update 2012-001 (Mac OS X 10.6.8) my Adobe Photoshop CS 8, Dreamweaver 8, and InDesign CS programs crash when I try to save a file. HELP!!!

Howdy,
Apparently some are reporting that this causes the older PowerPC (PPC) applications that are supported in 10.6 via 'Rosetta' to crash upon attempting to open/save/print using any dialog box, or fail in other similar ways such as simply not printing or quitting, or freezing/hanging/crashing of the application.
I have read of some companies that have indeed submitted proper bug reports to Apple, but that is not a guarantee of a bug-fix being issued.
You might wish to read:
http://www.macintouch.com/readerreports/snowleopard/index.html#d02feb2012
If you are unsure if you are still using PowerPC apps, if the application is currently running, look under the 'Activity Monitior' (in Applications -> Utilities), or alternatively you could check in the System Profiler, Applications. Check the column "Type".
Here is a fairly simple way you can restore you system and restore you applications functionality again, if you don't have a recent clone or good Time Machine backup that you can restore from. If you do, restore from your backup prior to having installed the Security Update 2012-001.
Time Machine restore: http://support.apple.com/kb/ht1427
If you are restoring a backup made by a Mac to the same Mac
With your backup drive connected, start up your Mac from the Lion recovery partition (Command-R at startup) or Mac OS X v10.6 installation disc. Then use the "Restore From Time Machine Backup" utility. Select the backup prior to your issues, and it will be restored back to the state it was in at that time.
If you can't easily restore from a backup, you can instead do the following:
- You first start by reinstalling your OS X 10.6.x, this will preserve all your user data, your applications, no worries there.
- Then install the Mac OS X 10.6.8 Update Combo v1.1 (links provided below)
- Make sure you're printers are showing up correctly in your system preferences, if not, re-add the printers
- Then finally, run the Apple Software Update (by pulling down the Apple Menu), and install any and all remaining updates, except do not then re-install the Security Update 2012-001. It is possible that you may have to reboot after installing some of the updates, and you may even need to run it a 2nd time to make sure that you've got all updates, except NOT the Security Update 2012-001.
Links for 10.6.8 Update Combo v1.1:
http://support.apple.com/kb/DL1399
or the link to directly download this 1.09GB combo updater:
http://support.apple.com/downloads/DL1399/en_US/MacOSXUpdCombo10.6.8.dmg
Cheers,
Daniel Feldman
=======================
MacMind
Certified Member of the
Apple Consultants Network
Apple Certified (ACHDS)
E-mail: [email protected]
Phone: 1-408-454-6649
URL : www.MacMind.com
=======================

CS6 Illustrator and InDesign colours are changed when the PDF is saved.

CS6 Illustrator and InDesign colours are changing when the saved PDFs are displayed on some different computers and for digital print output. I have ensured that the colours are all CMYK and tried different adjustments like preserving the numbers and the like but nothing is working. It prints properly on my inkjet and has displayed properly on different computers.

You need to read up on color management, color profiles and all that....
Mylenium

Creating INDD file from INX and visa versa

Hi
My task is to create a inx file from indd file and that was easy. I just use
var myDocument = app.open(File(sourceFileName));
//save INX
myDocument.exportFile(ExportFormat.INDESIGN_INTERCHANGE, File(destinationFilePath+".inx"));
but my problem is that I now have a more that one INDD file and one INDB file and client ask me to make INX file from it.
(I;m just a developer and I never use InDesigner application at all so is it possible? and how?
and than I have to form INX file create INDD file , text file and all Linking files in Links folder.
I found a
var myDocument = app.open(File(sourceFileName));
myDocument.packageForPrint(myLinkFolder, false, true, false, true, true, true, "", false);
but problem is that I got only INDD file and for some reason the newly create INND file has a name undifined_1.indd (I found that this is a file name that script foud from INX file ?!?) LInks file is empty.
Is it possible that he create package and put all eps file there !?!

I'm a designer not a developer, so I'm not sure I'll be helping but the normal behavior when opening an INX file is creates an untitled .indd file. This is is typical. I'm not sure how you would automatically rename back to what it was previously. Have you tried packaging the indd file BEFORE you make the INX file? Also InDesign has the ability to embed the images in the file or link them to external files. You might check to see if that is done, by checking the links pallet. Unfortunately I'm not following what you're starting goal and end goal is. I'll be helpless with the programming end, but any questions regarding how InDesign would typically do it, I'm happy to help with. Rosie Trying to learn scripting by osmosis (tucks her laptop under her pillow) On Wed, Feb 18, 2009 at 4:31 AM, lpastor74 <[email protected]> wrote: > A new discussion was started by lpastor74 in > but problem is that I got only INDD file and for some reason the newly > create INND file has a name undifined_1.indd (I found that this is a file > name that script foud from INX file ?!?) LInks file is empty. > > Is it possible that he create package and put all eps file there !?! > > ________________________________ > View/reply at Creating INDD file from INX and visa versa > Replies by email are OK. > Use the unsubscribe form to cancel your email subscription. > >

Unknown error when exporting 32-bit 5.1 wav audio

I get the ever useful "Unknown error" when exporting the audio from Premiere Pro CS6 to a 32-bit, 5.1 channel uncompressed WAV file most of the time. I was able to get it to work just fine by pasting the audio to a new project, but that isn't working anymore. I get the same error when I change it to 24-bit audio. However, when I change to 16-bit sound it works fine.
First, is there a real audible difference between 16- and 32-bit when it's all going through a WAV to AC3 converter? The AC3 files get dumped into Encore as the audio track so that I can get 5.1 sound on blu-rays instead of Encore re-encoding things.
Second, what would cause it suddenly not work, and how can I get it working again?

That error can happen for many reasons...one of the reasons that I occassionaly get it is because I try exporting a movie to an external drive that has been formated in the old FAT32 instead of the NTSF standard. FAT32 only allows for file sizes up to 2 gigs. And as soon as it reaches that...I would get that error. I don't know if that is why you are getting that error...but it would be easy to check. 1) are you generating a file that is over 2 gigs? 2) is your drive that you are exporting to FAT 32 (just right click the drive in My Computer and select "properties" then just look for what it says next to "file system".

LR 4 on Windows 8 - Cannot create preview thumbnail when exporting?

I thought I had this figured out but it appears to occur somewhat randomly. Since upgrading to Windows 8 when I export files that I have imported from Canon raw .CR2 for some files it gives an error that "the file could not be written" and lists the original source .CR2 file name. It does not do it everytime but once it happens it happens everytime for that file. When exporting 10 JPG files for example only 3 of them may have this issue. The file still exports and creates the JPG file and the only issue with the exported file appears to be that it did not create the preview thumbnail.
I have tried importing the files into new catalogs, writing to different folders etc but it still happens. Any ideas?

Ok, after lots of attempts to recreate I can do it like this:
Export as JPG to hard drive and select 'limit file size' option and give any size smaller than the full 100% quality JPG would normally create. Using any other options to limit file size such as quality < 100 or resize long edge to 1024 completes successfully.
Can someone else confirm this on Windows 8 with LR 4.2, it only takes a single file?

File Error: Unknown File when trying to render a Motion Lower third

I'm getting this: "File Error: Unknown File" when trying to render a Lower third made in the Motion tab. I'm using FCP 6.0.6 and haven't had any issues with this before. It seems to work fine if there is just text, but as soon as I apply any effect, like a drop shadow, I get that error message.
Thanks,
Joe

What's the exact format of the video you're working with and the exact specification the sequence you're editing in?

How can i include css in html file when exported

I want the CSS should be included in the html file when exported, how is that posable?

Muse follows its own structure and keeps HTML, CSS and JS code in separate files as and when possible. If you want all that code to be merged into the HTML file itself, then there is no option to force Muse to do that. You can however, add your own CSS code into the HTML page by adding the CSS using either the Insert HTML option or using the HTML for <head> option in Page Properties > Metadata.
Cheers,
Vikas

Cannot create a file when that file already exists, but should overwrite

Hi,
I need the same file name which is at Sender side and when it reaches to Receiver directory without timestamp.
for eg., Sender side : Yeswanth.txt
and also receiver side : Yeswanth.txt
but, here it should overwrite the existing file (because, the sender side file name is always constant) at receiver directory when the job schedules for each time.
Processing parameters i has given on Receiver side:
File Construction Mode : Create
put file : Use Temporary File
and I enabled the Adapter Specific Message Attributes at Sender side and Receiver side.
Error getting receiver side at communication channel :
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException:
Yeswanth.txt: Cannot create a file when that file already exists. : com.sap.aii.adapter.file.ftp.FTPEx: 550
Yeswanth.txt: Cannot create a file when that file already exists.
Reward points for useful answers.
Regards,
Yeswanth.
Edited by: YeswanthRaj Kumar on May 23, 2008 8:20 AM

Hi Yeswanth
Then you can try with a "Add Counter". This will create new file each time with the same name but a counter will be added to the file name at the end specifying the number of times it is created.
You can also the specify the format to create the counter once select this option u can correspondingly fill the Format and step fields.
Will this be fine.
Regards
Ashmi

FTPEx: 550 : Cannot create a file when that file already exists.

Hi experts,
I am working on idoc to file scenario and PI 7.1. The idoc is split into 3 files.
In sxmb_moni , the message is successful , but in rwb( Message montoring) i am geeting the fllowing Error message.
' Delivering the message to the application using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: An error occurred while connecting to the FTP server '172.19.125.190:21'. The FTP server returned the following error message: 'com.sap.aii.adapter.file.ftp.FTPEx: 550 /Storedata/Outbound/0000001802: Cannot create a file when that file already exists. '. For details, contact your FTP server vendor..'
and this error message is not displayed for all the target files , some files are getting created succesfully.
After some times , the file in error status , gets created automatically.
What may be the reason.?
Thanks in advance .
Best Regards,
Anil

There seem to be already some files in your Target Directory with the same name as your new files (which the CC is trying to place) and the CC is not able to overwrite the existing files and hence the error...check this.
Check: http://help.sap.com/saphelp_nwpi71/helpdata/EN/44/69d7cfa4b633eae10000000a1553f6/content.htm
14. Select the File Construction Mode.
u25CB Create
The file is created. The document received last is saved in each case.
If you want the created file to be overwritten, select Overwrite Existing File. If you do not set the indicator, processing is stopped until the created file is processed.
You can only set the indicator if you select Use Temporary File under Put File below.
Regards,
Abhishek.
Edited by: abhishek salvi on Jul 28, 2009 6:59 PM

Cannot rename DC, "Cannot create a file when that file already exists."

Hi,
A long time ago we used a domain controller named jacob.mydomain.lan. It was removed, possibly in a 'dirty' way, and now we cannot re-use that name for another domain controller. In the meantime we have upgraded to Win 2012 domain controllers
now, and when I enter this to rename:
netdom computername ourdc.mydomain.lan /add:jacob.mydomain.lan
I get the error: "Unable to add jacob.mydomain.lan as an alternate name for the computer. The error is: Cannot create a file when that file already exists."
If I enter:
netdom computername ourdc.mydomain.lan /remove:jacob.mydomain.lan
I get: "The command completed successfully", but it still refuses to add jacob.mydomain.lan
After each attempt to add a forward zone dns record 'jacob.ourdomain.lan' has been created. I always erase this manually afterwards.
What is the problem? How can I search to find the offending 'file' named 'jacob'?
Thanks a lot for help on this.
regards Tor

Kevin,
I suggest you wait 30 days instead of 3 days before you enthusiastically close threads. Some people might think you are being a jerk if you don't.
"K_evin Zhu" wrote in message
news:[email protected]...
Hi,
As this thread has been quiet for a while, we will mark it as �??Answered�?? as the information provided should be helpful. If you need further help, please feel free to reply this post directly so we will be notified to follow it up. You can also choose to
unmark the answer as you wish.
BTW, we�??d love to hear your feedback about the solution. By sharing your experience you can help other community members facing similar problems. Thanks for your understanding and efforts.
Best Regards
Kevin
Tomás Mason

LR4 to PS and back creates extra file?

I recently updated from LR3 to LR4. My edit in Photoshop preferences are for a psd.
When I "edit in Photoshop" using LR4, Lightroom immediately creates a "filename-edit.psd" file. With LR3, only when I saved from within PS did it create the new file edit.psd file. I like to keep the option open to use "save as" and save just a jpg if I know this is going to be my final edit and not have a psd. Now if I save as a jpg, I end up with an extra .psd file. Is this a change in LR4 or have I not set something that I had set in LR3?

What PS version?
În data de 30.03.2012 17:57, "treborsetag" <[email protected]> a scris:
LR4 to PS and back creates extra file? created by treborsetag<http://forums.adobe.com/people/treborsetag>in
Photoshop Lightroom - View the full discussion<http://forums.adobe.com/message/4302568#4302568

The cluster service terminated, error 7024, cannot create a file when that file already exists

I have a test 2-node Failover cluster using Server 2012 R2
As of last night the cluster service on one of the 2 nodes is down with this error:
The Cluster Service service terminated with the following service-specific error:
Cannot create a file when that file already exists.
EventID 7024
The Cluster service waits 60 sec, tries to start, and the same error occurs again.
Any idea where to look to identify which file this error is referring to, or how to go about identifying root cause and getting a solution?
thank you.
samb

Hi Yeswanth
Then you can try with a "Add Counter". This will create new file each time with the same name but a counter will be added to the file name at the end specifying the number of times it is created.
You can also the specify the format to create the counter once select this option u can correspondingly fill the Format and step fields.
Will this be fine.
Regards
Ashmi

Illustrator and InDesign creating unknown files when exporting and saving. MAC CS5

Similar Messages

Maybe you are looking for