Illustrator CC custom fit print doesn't work

This is a serious workflow disruption: In CSx I could open any file, choose a print preset, click on 'custom' for Media Size and it would automatically adjust the print width and height to whatever the artwork boundaries were (Ignore Artboards ✓'d). Now in CC it just uses whatever I had set for the print preset when I created it rather than adjusting like bfore. Is there something I'm overlooking? Can/will this be fixed? This might sound like small pease compared to the overall view, but this makes a design that would normally take a few seconds to print to our screens to almost half a minute.

Thanks, I thought I already moved it. Guess not :/

Similar Messages

HP M1120 mfp: two sided printing doesn't work

After that I have installed Snow Leopard the double printing doesn't work any more. There is someone that have found a solution to this problem?

Have you updated the software through Software Update? And did you check if there was a Duplex feature that needs to be enabled when adding the printer?
This thread also has details about adjusting the memory, but I am not sure if it applies:
http://discussions.apple.com/thread.jspa?messageID=10231235&#10231235
Hope this helps.

My Canon printer doesn't work after updating

Hi everybody.
Everytime when I update software, my printer doesn't work. I use Canon i-sense lbp3010b. For example, when I try to print out a document, I press the PRINT button (in any application) and it opens the printer application. It shows the message "Printing…" for some 3 minutes, then shows "Paused". I try to resume the process, but it doesn't help-the same scenario, again. Once, I have another problem on printer, which printed only graphics, not text. I solved this problem downloading the printer driver from canons austrian web-site, but it doesn't help either anymore.

Might be best to delete device driver for printer before updating. Then try setting your printer up afterwards. The update may have some compatibility issues. I'm sure there will be updates and bug fixed in the near future. There have been a lot of issues with the recent lion software updates especially. Best thing I can say is be patient and make sure you submit this issue to apple.

Smart Web Printing doesn't work in IE9

Smart Web Printing doesn't work in IE9...
This question was solved.
View Solution.

IE9 has not yet been released in final form, it is still in Beta. I do not know if HP has any plans to support the Web Printing application on IE9, but if they do I would not expect them to release anything before the official IE9 release.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

I just updated to 7.1 on my 5S and now my finger print doesn't work. Anyone else have that problem?

I just updated to 7.1 on my 5S and now my finger print doesn't work. Anyone else have this problem?

Hey Carol5005,
Thanks for the question. I understand you are experiencing issues with Touch ID. The following article provides some troubleshooting steps that may be helpful:
iPhone 5s: Using Touch ID
http://support.apple.com/kb/HT5883
Resolving issues with Touch ID
1. Verify that you are using the latest version of iOS.
2. Ensure that your fingers and the Home button are clean and dry.*
Note: Cover the Home button completely. Don't tap too quickly, don't press down hard, and don't move your finger while Touch ID is scanning. Make sure that your finger touches the metal ring around the Home button.
3. If you are using a protective case or screen protector, it must leave the Home button and the surrounding ring completely unobscured. If it doesn't, remove the case or screen protector and try again.
4. Tap Settings > Touch ID & Passcode and verify that:
- iPhone Unlock or iTunes & App Store is enabled.
- One or more fingerprints have been enrolled.
5. If one finger isn't working, tap Edit in Settings > Touch ID & Passcode to delete and then reenroll the finger.
6. If that finger still isn't working, try enrolling a different finger.
7. If you are unable to enroll any of your fingers, take your iPhone 5s to an Apple Retail Store, Apple Authorized Service Provider, or contact AppleCare for further assistance.
* Moisture, lotions, sweat, oils, cuts, or dry skin may affect fingerprint recognition. Certain activities can also temporarily affect fingerprint recognition, including exercising, showering, swimming, cooking, or other conditions or changes that affect your fingerprint.
Thanks,
Matt M.

EPSON CX5600 PRINTER DOESN'T WORK AFTER MOUNTAIN UPDATE

Hello Dear,
I've using my Epson Stylus CX5600 for a long time with OSX 10.7 Lion on my Mac.
The printer is connected in another computer (Windows 7) and I can print fine from my macbook air
After my system update for OSX Mountain Lion yesterday, my printer works fine only on Windows computer
on my macbook doesn't works anymore
I've re-installed a lot but when I try to print the sheets appears in blank
The driver-version available in Mountain Lion is 1.5
I guess this is the problem and need a urgent correction driver update
I'm looking forward to the internet and Epsons websites but didn't find nothing,
in Epson website doesn't
Can you help me please?
Thankyou

Hi my friend,
I've tryed Bonjour, but only works Windows to install a print for Mac.
I need the opposite... print from Mac to Windows.
Yes, I've a lot of problems to install a printer on Lion, but after 3 days I got success
I can't remember but I did this:
1. In iMac System Preferences->Print&Fax->"+"
2. In "Add Printer" click and Tool Bar->Customize Toolbar...
3. Add "Advanced" to Tool Bar and click "Done"
4. Click Advanced->Type->LPD/LPR Host or Printer
5. URL: lpd//user:[email protected]/EPSON%20Stylus%20CX5600&20Services
6. Printer Using->Select Printer Software... (EPSON Stylus CX5600 Services)
I did this and on Lion works fine. But now on Mountain Lion I can install, but I've received the error message
Do you have any idea?
Thank's again

My Lexmark X2670 printer doesn't work right since I reinstalled the Firefox 3,6 version. I keep getting the alignment page to print over and over. Is there a problem between the two? Do I need a new printer driver? What?Daisynew66

I had to change my hrowser to Firefox because Internet Explorer 9 doesn't work with my ancestry.com program. I can't uninstall Internet Explorer 9. I got Firefox 4 and it didn't work either. I started having problems with my printer working at all then. l was told to go to Firefox 3.x. I looked and there is no 3.x it is 3.5 or 3.6. I downloaded 3.6. Now I keep getting a alignment page and end up having to shut off my printer. I'm using way too much ink. I'm almost out with no hope of getting more ink until I get paid. I can't find anyplace that says to update a driver or that I need a plug-in or what might be I've done everything I know to do.wrong. It has new port cables. Do you have any idea what could be wrong? Do I need to uninstall the printer and reinstall it again? daisy

I just figured out the print quality issue for my wife with her new iMac and new printer.
She replaced both at once and she couldn't understand why her Artisan 730 was lower quality then her Epson R280 when they had the same specs.
Turns out the newer printer had the option to connect via wifi which we used during setup.
The driver options are completely different depending on how you connect.
Once I connected via USB the correct options were available and the print quality was better.
Looking at the R2400 it dies not have wifi, but while researching the problem for my wife someone esle was having an issue updating to the latest printer driver.
If you go into the print utility from the Printer and Scanner system preference and under the general tab you should have driver 5.5.
One user had to delete the old printer driver before Software Update loaded the newer printer driver.
https://discussions.apple.com/message/15947486#15947486
On my MacBook Pro (w Snow Leopard) I always had to reconnect my wifi at home when it woke up. I upgraded my router from an old Netgear to a newer N D-Link and stopped having to do that.
I would be surprised you would have that problem with an Airport Extreme, you might check to see if there is a firmware update for it.

Link in my customized Report Template doesn't work – Apex 3.1

I created a report template based on columns of my report
My query report is:
SELECT MEM_NAS ID, MEM_NOM NAME, MEM_DATE_NAIS BIRTH
FROM ACMT_MEMBRE;
My customized report template have this Row Template definition:
<tr onclick="redirect('f?p=&APP_ID.:6:&SESSION.:::6:P6_NAS:#ID#');">
<td #ALIGNMENT# class="t16data_edit">#NAME#</td>
<td #ALIGNMENT# class="t16data_edit">#BIRTH#</td>
</tr>
This would redirect to the page 6 when user click anywhere on a row but it doesn’t work.
I have this error message:
CHECK$01');"> CHECK$01');"> CHECK$01');"> CHECK$01');"> CHECK$01');"> CHECK$01');"> CHECK$01');"> CHECK$01');"> CHECK$01');"> CHECK$01');"> CHECK$01');"> CHECK$01');"> CHECK$01');"> CHECK$01');"> CHECK$01');">
I realized that problem is caused by #ID# because if I hardcode this ID, it works.
How can my report template get the “ID” from my query report ?
Apex version: 3.1
Edited by: mario_romero77 on Jun 8, 2012 10:06 AM

mario_romero77 wrote:
I created a report template based on columns of my reportAlways post code wrapped in <tt>\...\</tt> tags to prevent the forum software mangling it.
My query report is:
SELECT MEM_NAS ID, MEM_NOM NAME, MEM_DATE_NAIS BIRTH
FROM ACMT_MEMBRE; My customized report template have this Row Template definition:
<tr onclick="redirect('f?p=&APP_ID.:6:&SESSION.:::6:P6_NAS:#ID#');">
<td #ALIGNMENT# class="t16data_edit">#NAME#</td>
<td #ALIGNMENT# class="t16data_edit">#BIRTH#</td>
</tr>
Is the report template definitely of type Named Column (row template) (defined on App Builder page 4000:4654) and not Generic Columns (column template) (defined on page 400:258)?
Note that the <tt>#ALIGNMENT#</tt> substitution string is not supported in named column templates. Set column alignment explicitly using HTML attributes in the template, or use CSS.
This would redirect to the page 6 when user click anywhere on a row but it doesn’t work.
I have this error message:
CHECK$01');"> CHECK$01');"> CHECK$01');"> CHECK$01');"> CHECK$01');"> CHECK$01');"> CHECK$01');"> CHECK$01');"> CHECK$01');"> CHECK$01');"> CHECK$01');"> CHECK$01');"> CHECK$01');"> CHECK$01');"> CHECK$01');">
{code}Where do you see this? It looks like there's a mismatch between the report columns returned by the query and those referenced in the report template. Or the data contains unsafe HTML characters that aren't being escaped.
Yes, my report query has a column called ID and it's set as Hidden. This could be the problem. In a report based on a named column template any columns referenced in the template must be +shown+ in the report, even if (as in this case) the column value is not visible to the user: the positioning of the <tt>#ID#</tt> column placeholder in the <tt>onclick</tt> attribute rather than in a table cell is what makes it "hidden". *The Show checkbox for the ID column must be checked.*
From the gobbledygook being generated it looks like there could be a row selector checkbox column in this report as well? Named column row templates must include substitution placeholders for every shown column. It's also advisable to keep the columns in the same order in the SQL, report column attributes and row template.
Something like
{code}
<tr onclick="redirect('f?p=&APP_ID.:6:&SESSION.:::6:P6_NAS:#ID#');">
<td class="t16data_edit">#CHECK$01#</td>
<td class="t16data_edit">#NAME#</td>
<td class="t16data_edit">#BIRTH#</td>
</tr>
{code}
I realized that problem is caused by #ID# because if I hardcode this ID, it works.
How can my report template get the “ID” from my query report ?If the above doesn't help then the easiest way to troubleshoot this would be for you to upload the app to apex.oracle.com and post guest developer credentials for the workspace so we can see the whole thing: template, SQL, and report attributes. Otherwise we're likely to and up with a lot of tedious to and fro here posting bits of code and attribute values.

Adobe PDF printer doesn't work correctly.

I have installed Adobe Acrobat X Pro. But when I try to convert a document to a PDF file using PDF printer a progress bar appears. But then nothing happens.

Hi Anubha,
This problem happens with every kind of file types (Eg. .doc, .txt, .jpg).
This printer worked very well earlier. I got this problem suddenly. Not sure what is the reason. Tried re-installing Adobe, but doesn't work.
I used 'File> Print> Printer> Adobe PDF' option to create pdf files. (Eg. In MS Word, Notepad, and etc.)
Thank you for your reply.
Udaya.

Wireless Printing Doesn't Work

In February I had to purchase a Mac desktop computer due to the failure of my semi-old HP Windows computer. When we bought the Mac we also purchased a new printer since it would be cheap since we bought it with the computer. The printer is a HP Photosmart Plus B210a series model and so it has wireless printing. However, the only way to get the 'wireless printing' to work is if you first install the software. Seems good, right? No. After proceeding to turn off the printer like every normal person since you don' want to leave it on, everything goes wrong. If you turn the printer on at some time, the wireless printing won't work at all! Even if I disconnect and reconnect the WiFi to it and print the diagnostics page, where everything turns out normal EVERYTIME. This is quite thoroughly making me irate because to get the wireless printing to work again, you have to uninstall the software and reinstall it. I got so fed up with it the other night that I connected a USB cord to it, which totally defeats the purpose of the entire printer since it's suppose to be hi-tech for it's wireless printing and e-services ( which require WiFi). Can anyone please help me figure out how to have the printer continuously working so it doesn't just stop when I turn it off?
Solved!
Go to Solution.

By the fact that you desire the printer to be turned off, I would think that you probably shut off your computer and other devices as well? You do this every time you're done?
There are two schools of thought on this.
Turning it off:
- Reduces electrical usage versus leaving it on in low power or 'sleep mode'. In today's modern terms, you'll probably save about $40 a year.
- If you have a fan or cooling issue, such as you're in a tight space with no airflow, this can reduce heat and cause hardware to last longer.
- No one can access your machine or other devices when they are turned off. This prevents virus's from executing or running so long as the machine *remains* off.
Leaving it on:
- Allows programs to update automatically when you are not there, dramatically reducing the chances of getting a virus and also giving you the latest version of your software.
- Virus scans can be run *automatically* to fully scan your computer while your not there, making it unnessasary to do this when you're actually using the computer, and therefore speeding up the computer greatly.
- Instant-access to what you're doing, instead of having to wait for the machine and devices to turn on.
- If you're sharing files, folders, or printers, this makes them available on the network.
Computers and their accessory devices are designed to run 24/7, 365 days a year. They are also designed to be shut off every night, if that is your preference. However, I think the benefits of leaving things on greatly outweigh the benefits of turning things off. Again, however, it's a personal decision.
If you decide to turn your devices off after use, please spend the time at each session to download and make updates to your computer, especially WIndows Updates and anti-virus databases. Especially with the anti-virus updates, try not to access the internet until you have the latest anti-virus update installed.
I am a Bestbuy employee who volunteers on these boards on my own time. I am not paid for posting here, and you should understand that my opinions are exactly that - opinions. I do not represent Bestbuy in any way.
: Open Mailbox

Custom Page Sizes doesn't work

I have set up a few custom page sizes but when I try to used them, it doesn't work. Well once in blue moon it does.
I can't find a consistent way that it does. I have read all the online help and followed the process to the letter, but when I select the page size under Paper Size it doesn't change the paper size.

J,
There definitely are problems with Custom Page sizes. I don't have enough specifics to formulate what I would consider good feedback to Apple, something that they could easily act on.
I can tell you that if you set your System Preferences > International > Formats > Measurement Units: US and Set your Pages > Preferences... > Rulers > Ruler Units: Inches, you can create the size you want and it will stay selected and not pop back to the default. Here's what I have:
Again, I know that there's a problem. If you wish, you can use the setup I outlined and get the job done and later take up the cause of fixing whatever is going on with the CM units.
To Fruhulda, you noted that 9 cm by 6 cm is a size that fails as J described - and I confirmed here. However to get a successful size I found that I could use 3.53" X 2.35" (8.97CM X 5.97CM), a very close compromise. There clearly are problems with measurement units in Page Setup.
Regards,
Jerry

Currency conversion type by customer exit variable doesn't work

Hi all.
In my query I need amounts by quarter, applying quarters last date rates as currency conversion.
Query has Year parameter. Based on this parameter, by customer exits I calculate every quarters last date and use them as currency conversion types.
The problem is that query DOESN'T APPLY currency conversions!
I checked TCURR table - currency conversions do exist for applied days
I checked my customer exits - the date calculation works fine
I suppose where is something wrong in query processes (customer exits/currency conversions) sequence before running it.
Someone knows anything 'bout that?

Check these docs.. and check again.
[Creating Currency Translation Types|http://help.sap.com/saphelp_nw04/helpdata/en/80/1a6813e07211d2acb80000e829fbfe/content.htm]
[Use Variables for Currency Conversion|http://www.scribd.com/doc/7061035/How-to-Use-Variables-for-Currency-Conversion]

Add printer doesn't work

I have an iMac 2.1 GHz powerpc G5, 1 GB DDR2 SDRAM, Mac OS X v 10.4.11.
I cannot add a printer. When I press the + button it does absolutely nothing. I've read support options to RESET the printer, but that did nothing, too.
Please help me be able to add a printer, especially when the + key doesn't work.

If you have any other printers in your printer list, remove them. Make sure you have the latest drivers for your printer, then try to add it.

Printer doesn't work anymore.

I have a lexmark (p3120) printer, but it doesn't work anymore. I tried to install it again, deleted the printer preferences, download the available drivers, update my mac os x to 10.4.11 (with de download of the apple site, the combo_update) and repair the disk utilities.
Can anyone help me with this?
Thanks in advance

Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. Select your Mac OS X volume.
6. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it finishes.
The usual reason why updates fail or mess things up, or things don't load/run, is if Permissions are not fixed before & after every update, with a reboot... you may get a partial update when the installer finds it doesn't have Permissions to change one obscure little part of the OS, leaving you with a mix of OS versions.
Some people get away without Repairing Permissions for years, some for only days.
If Permissions are wrong before applying an update, you could get mixed OS versions, if Directory is the slightest messed up, who knows!
If many Permission are repaired, or any Directory errors are found, you may need to re-apply some the latest/biggest updates again, or even do an A&I if you have enough free disk space.
The combo update for PowerPC-based Macs...
http://www.apple.com/support/downloads/macosx10411comboupdateppc.html
The combo update for Intel-based Macs...
http://www.apple.com/support/downloads/macosx10411comboupdateintel.html
Repair Permissions after re-install, then reboot again.
If all the above do not resolve the problem, then it's time for an Archive & Install, which gives you a new OS, but can preserve all your files, pics, music, settings, etc., as long as you have plenty of free disk space...
http://docs.info.apple.com/article.html?artnum=107120

Printer doesn't work after Panther to Tiger upgrade

After upgrading from Panther to Tiger my usb connected Canon PIXMA iP5000 printer no longer works. In printer setup utility when I click "add" I see the ip5000 but the "Print Using" dialog box says "please select a driver or printer model". In the drop down list under Canon there is no driver listed that corresponds to my iP5000 (also, only gimp-print drivers are listed for some reason).
I reinstalled the printer software from the disk that came with the printer but still nothing relevant appears in the list under Canon. I installed a newer OSX driver from the Canon website but still nothing relevant (and still only the gimp-print drivers in the list under Canon).
Using the finder search function I located a file called ip5000.ppd on the hard drive. I selected this file in the "Print Using" dialog box and was then able to add the printer. When I try to print though nothing comes out of the printer.
I installed a driver from www.printfab.com for the iP5000. This works fine but apparently I have to buy a license for $61 to use the software?
Can anyone out there tell me what's going on? Why is the driver from the Canon web site not showing up under the Canon tab in the printer setup utility? Any idea where it is or what file extension it should have so I can search for it?
Thanks,
Stickman007
imac G5 PowerPC Mac OS X (10.4.8)

In step 3, I moved the contents of the BJPrinters
folder to the desktop instead of deleting them
(deleting is so final).
We need to delete and empty the trash. It seems that for some setups, leaving the files on the system (including the trash) interferes with the new driver installation/operation.
In step 4, the only file that seemed close to what
you mentioned was CanonPrinterDrivers.pkg. I moved
it to the desktop also.
This is the original package included with the OS for the Canon BJ drivers we are deleting. In case you ever need to add an old Canon driver then it would be best to put this file back. But it is odd that there is no other Canon package. I expected there to be one for the iP5000 that you installed.
The result was the same as before - when I try to add
the printer the "Print Using" menu still shows a
greyed out "please select a driver of printer model".
The Canon folder still shows the same gimp-print
options, none of which are related to the iP5000.
Yes. The iP5000 won't appear in the list as it hasn't been written to do so. As I said before, the driver, upon detection of the printer, adds the printer to the list. You cannot browse to it.
Let me know if you have any other ideas (or if I need
to delete the files rather than just move them to the
desktop).
So, I think you need to do the steps again, this time delete the contents of the CanonBJ folder and empty it from the trash. The thing I would add this time is turn off the iP5000 (unplug the power cord but leave the USB connected) at Step 6 (you may need to shutdown rather than restart the Mac). Then start the Mac, install the latest driver (which is v4.1.9) do the disk permissions and then, before you open the Printer Setup Utility, reconnect the power cord to the printer. Hopefully now the driver will detect the printer and add it to the list.
Paul

Illustrator CC custom fit print doesn't work

Similar Messages

Maybe you are looking for