Illustrator CC Plugins: CC DEVELOPER TOOLS?

I just had a nerve-wracking experience.
I've used FontAgent Pro (Mac OS X 10.8.4) for years, and have come to depend on its exellent font management capabilities. But today, I began to have trouble with a particular font. The font is in perfect condition (no errors reported or repairs needed - it displays perfectly in the Finder) but even though it was activated like all my other active fonts, Illustrator CC couldn't SEE it, so I couldn't USE it.
I restarted the computer, but this didn't help. Then Ilustrator began bombing (with the full error log), and it became impossible to run Illustrator CC at all.
So I uninstalled Illustrator CC, and downloaded it again and installed it again. But it still crashed on app start. :-(
So I decided to run it from my bootable backup drive, and it ran FINE. At this point, I ran it again from my primary boot drive and it ran FINE. Go figure.
In the mean time, I contacted Insider Software (makers of FontAgent Pro and plugins for Adobe apps), to see if they were working on an update to be more compatible with Creative Cloud apps. They are, BUT ... apparently Adobe hasn't released the "CC" DEVELOPER TOOLS yet, so they CANNOT finish their "CC" update of this indispensible plug-in.
Um, what's going on, Adobe???

Same here. But for me InDesignCC is the problem. Didn't go to your lengths, but did clean every single cache with CacheCleaner and deleted relevant FontAgent preferences, which has always worked in the past. All to no effect. Reduced to using FontBook and thinking about upgrading an old version of Suitcase …

Similar Messages

Error loading plugins brs pencil tool | cc | Illustrator 2014

Hello there,
I use Illustrator cc 2014, and recently when I open the application, there will be a pop up with "error loading plugins brs pencil tool". I click continue, and the pencil tool is completely missing from my tool bar. I wanted to know what would be the best way to fix this? I have tried updating the software and it says "failed to update, error u44m1p7". I don't want to mess around with any of the plugins manually as I know there has to be a certain way they are placed and installed, and I'm not sure what the right way is. If someone has had to remove and add a plugin before and knows how that info would be helpful.
Thanks for any help,
-Laura

Laura,
You may consider a reinstallation using the full three step way (otherwise strange things may linger):
Uninstall (ticking the box to delete the preferences), run the Cleaner Tool, and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html

Problem with Plugin Installation of SAP widget Developement tool in Eclipse

Dear All
I am faceing problem while installation of SAP widget Developement tools in Eclipse. Please help me Out.
I have Downloaded Eclipse and also SAP Widget Developement tools.zip
When I try to Install the Plugin for SAP Widget developement I get an error saying "Install has encountered a problem.Cannot Complete the install because one or more required items could not be found". When I click on Detail to see teh details following error log is displayed :
+Cannot complete the install because one or more required items could not be found.
Software currently installed: SAP Widget Development Tools 0.13.0.1376 (corp.sap.pal.gadgets.tools.widgetTools.feature.group 0.13.0.1376)
Missing requirement: Structured Source JavaScript Model 1.0.101.v200706071955 (org.eclipse.wst.javascript.core 1.0.101.v200706071955) requires 'bundle com.ibm.icu [3.4.4,4.0.0)' but it could not be found
Cannot satisfy dependency:
    From: SAP Widget UI Designer 0.13.0.1376 (corp.sap.pal.gadgets.tools.uidesigner 0.13.0.1376)
    To: bundle org.eclipse.wst.javascript.core 0.0.0
Cannot satisfy dependency:
    From: SAP Widget UI Designer 0.13.0.1376 (corp.sap.pal.gadgets.tools.uidesigner.feature.group 0.13.0.1376)
    To: corp.sap.pal.gadgets.tools.uidesigner [0.13.0.1376]
Cannot satisfy dependency:
    From: SAP Widget Development Tools 0.13.0.1376 (corp.sap.pal.gadgets.tools.widgetTools.feature.group 0.13.0.1376)
    To: corp.sap.pal.gadgets.tools.uidesigner.feature.group [0.13.0.1376]+
I require your help in this .
Regards,
Nikhil

Hi Nikhil,
Looks like some problem in the eclipse version.
Refer to the last point in this link - [Error while installing SAP Widget Developer tool.zip on Eclipse Java EE IDE; which says -
"The newest and default version of Eclipse is Galileo which is version 3.5.x
According to the Widget development guide, widget developer tool covers Eclipse 3.3.x (Europa) and 3.4.x (Galileo).
The problem is solved by downloading one of those versions from http://wiki.eclipse.org/Older_Versions_Of_Eclipse and installing widget development tools."
Hope this helps.
Regards,
Shilpa B.V

Microsoft Office Developer Tools for Visual Studio 2013 on Windows 10 Technical Preview

Hi, I've never developed a plugin for Office before. I've downloaded the technical preview of Windows 10 and have it running via Boot Camp on my MacBook (Looks good! I'll buy it when it comes out). Obviously with this being in beta it's understandable that
there are problems, so this is just a heads up on one particular problem. Maybe there's already a solution or workaround?
I've downloaded Visual Studio 2013 Community Edition, brought a copy of Microsoft Office Home And Student 2013 and am currently in the process of installing Microsoft Office Developer Tools for Visual Studio 2013.
The only problem though is that when I try to install it I get the following message:
http://s22.postimg.org/dxh1gtra9/Install_Problem_Office_Plugin_Tools.png
Here is the log:
http://pastebin.com/7wWkSfjF
I also tried to download the file directly and run that.
http://s3.postimg.org/tj9vb660j/Install_Problem_Office_Plugin_Tools2.png
I right clicked on the file and noticed an options called "Troubleshoot Compatibility". There was a wizard, and I ran through the wizard a number of times through different routes but none of them worked. I was unable to find the option which turned
off compatibility mode. I then searched for answers online which told me to do some things in the regedit program but that didn't seem to solve the problem.
Anyway, I understand that this is a beta version of Windows 10 and that there are going to be problems but thought it would be best to let you know. Perhaps I should just bite the bullet and buy Windows 8.
Many thanks,
Lawrence

Hi RealByReel,
Thanks for sharing the solution back.
Best regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Error while Installing and Starting SAP Widget Development Tools

Hi All,
I have downloaded Eclipse: eclipse-SDK-3.3.2-win32.zip from http://www.eclipse.org/downloads/download.php?file=/eclipse/downloads/drops/R-3.3.2-200802211800/eclipse-SDK-3.3.2-win32.zip
I am following the link: https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c032ae0a-7d6b-2a10-14a1-cc6efb066dfc
for Installing and Starting SAP Widget Development Tools as an Eclipse Plug-in
I am very new to it, So I was following Step by Step procedure.
On the 16th step I am getting an error:
AP Widget Templates (0.12.0.1167) requires feature "org.eclipse.gef (3.3.0)", or equivalent.
I had download the SAP Widget Development Tools.zip file from https://www.sdn.sap.com/irj/sdn/downloads?rid=/webcontent/uuid/b03b6544-c741-2a10-8999-ed04eb2b2c71
While unzipping the eclipse-SDK-3.3.2-win32.zip, there were two errors:
The System cannot find the file specified &
The file name or extension is too long.
I ignored them and continued the unzipping.
Please guide me as to how we can solve this error.
Ankur
Is it because I am using Eclipse 3.3.2 and not 3.3.0? If yes from where I can download Eclipse 3.3.0
Edited by: ankur malhotra on Jul 25, 2008 7:36 AM

Hi Ankur,
This happens sometimes because of the Eclipse that you use. Download the Eclipse JEE Version. When you go to eclipse.org and try to download eclipse you can do a comparision of the versions there, You download the version which supports all the web features.
http://www.eclipse.org/downloads/packages/eclipse-ide-java-ee-developers/ganymeder
Check the above link you will be able to see the package details. Please download this Java IDE for EE developers and try installing the SAP widgets foundation then, If you are facing any problems in installing the plugins thru local archived site please let me know.
Regards,
Sai

Simulation using Eclipse plugin for JCOP tools

Dear All,
In search for a simulation environment for java card applet development I tried to use Eclipse plugin for JCOP tools.
The samples which comes with the JCOP tools works fine but when try to debug my applet I receive the error: Wrong Data 6A 80.
Generic JCOP v2.4.1 is selected for Java Card Simulation.
Following is the JCOP Shell screen:
cm- /term "Remote|localhost:8050"
--Opening terminal
/card -a a000000003000000 -c com.ibm.jc.CardManagerresetCard with timeout: 0 (ms)
--Waiting for card...
ATR=3B F8 13 00 00 81 31 FE 45 4A 43 4F 50 76 32 34 ;.....1.EJCOPv24
31 B7 1.
IOCTL().
ATR: T=1, FI=1/DI=3 (93clk/etu), N=0, IFSC=254, BWI=4/CWI=5, Hist="JCOPv241"
=> 00 A4 04 00 08 A0 00 00 00 03 00 00 00 00 ..............
(908058 nsec)
<= 6F 65 84 08 A0 00 00 00 03 00 00 00 A5 59 9F 65 oe...........Y.e
01 FF 9F 6E 06 47 91 92 18 00 00 73 4A 06 07 2A ...n.G.....sJ..*
86 48 86 FC 6B 01 60 0C 06 0A 2A 86 48 86 FC 6B .H..k.`...*.H..k
02 02 01 01 63 09 06 07 2A 86 48 86 FC 6B 03 64 ....c...*.H..k.d
0B 06 09 2A 86 48 86 FC 6B 04 02 15 65 0B 06 09 ...*.H..k...e...
2B 85 10 86 48 64 02 01 03 66 0C 06 0A 2B 06 01 +...Hd...f...+..
04 01 2A 02 6E 01 02 90 00 ..*.n....
Status: No Error
cm> set-key 255/1/DES-ECB/404142434445464748494a4b4c4d4e4f 255/2/DES-ECB/404142434445464748494a4b4c4d4e4f 255/3/DES-ECB/404142434445464748494a4b4c4d4e4f
cm> init-update 255
=> 80 50 00 00 08 B1 04 15 2B 41 3F 62 AB 00 .P......+A?b..
(2668 usec)
<= 00 00 F9 02 71 E3 BB AD BD CD FF 02 00 00 3D 02 ....q.........=.
9C 31 C7 89 AD 44 8E 13 17 15 2E 5A 90 00 .1...D.....Z..
Status: No Error
cm> ext-auth plain
=> 84 82 00 00 10 CE 6C DC D2 8C BE 5E 33 EC 58 D0 ......l....^3.X.
57 3A 52 D2 24 W:R.$
(2288 usec)
<= 90 00 ..
Status: No Error
cm> delete -r a00000006203010c04
=> 80 E4 00 80 0B 4F 09 A0 00 00 00 62 03 01 0C 04 .....O.....b....
00 .
(1084 usec)
<= 6A 88 j.
Status: Reference data not found
jcshell: Error code: 6a88 (Reference data not found)
jcshell: Wrong response APDU: 6A88
Ignoring expected error
cm> upload -d -b 250 "D:\JCOP\eclipse\projects\DigitalTachograph\bin\digitaltachograph\javacard\digitaltachograph.cap"
=> 80 E6 02 00 16 09 A0 00 00 00 62 03 01 0C 04 08 ..........b.....
A0 00 00 00 03 00 00 00 00 00 00 00 ............
(2100 usec)
<= 00 90 00 ...
Status: No Error
=> 80 E8 00 00 FA C4 82 84 42 01 00 25 DE CA FF ED ........B..%....
02 02 04 00 01 09 A0 00 00 00 62 03 01 0C 04 11 ..........b.....
64 69 67 69 74 61 6C 74 61 63 68 6F 67 72 61 70 digitaltachograp
68 02 00 21 00 25 00 21 00 0E 00 29 03 3E 00 CD h..!.%.!...).>..
23 D2 01 BB 04 44 00 00 09 E3 4B E5 00 11 00 05 #....D....K.....
01 A2 04 01 00 04 00 29 04 00 01 07 A0 00 00 00 .......)........
62 00 01 02 01 07 A0 00 00 00 62 01 01 02 01 07 b.........b.....
A0 00 00 00 62 01 02 02 01 07 A0 00 00 00 62 02 ....b.........b.
01 03 00 0E 01 0A A0 00 00 00 62 03 01 0C 04 01 ..........b.....
01 DF 06 00 CD 00 00 00 80 00 00 FF 00 01 00 00 ................
00 01 81 03 13 00 12 07 03 00 00 02 01 03 06 0B ................
8C 81 00 00 00 80 00 0B 00 0B 01 01 00 00 0B F9 ................
00 80 00 11 00 0F 01 01 00 10 0E A9 0D D4 0D F7 ................
0E 07 0E 18 0E 26 0E 35 0E 44 0E 50 0E 72 0E 81 .....&.5.D.P.r..
0E 90 0E 9B 0E F5 11 05 11 1A 11 50 00 80 00 05 ...........P....
00 04 01 04 00 01 13 AF 13 B5 13 BA 14 0C 13 00 ................
(6775 usec)
<= 6A 80 j.
Status: Wrong data
jcshell: Error code: 6a80 (Wrong data)
jcshell: Wrong response APDU: 6A80
Unexpected error; aborting execution
I will be very happy if you can help me. I am desperately in need of a working debugging environment.
Thanks in advance!
Kind regards,
Mehmet

     * Processes incoming READ_BINARY APDUs. Returns data of the currently
     * selected file.
     * @param apdu   where the offset is carried in header bytes p1 and p2.
     * @param le expected length by terminal
     * @return length of the response APDU
    private short processReadBinary(APDU apdu, boolean protectedApdu, short leUnprotected) {
        if (!hasFileSelected()) {
            ISOException.throwIt(SW_CONDITIONS_NOT_SATISFIED);
        byte[] buffer = apdu.getBuffer();
        // retrieve p1p2 from apdu buffer
        byte p1 = buffer[OFFSET_P1];
        byte p2 = buffer[OFFSET_P2];
        short offset = Util.makeShort(p1, p2);     // offset encoded in P1/P2, 15 lowest bit
        // offset encoded in P1/P2, 15 lowest bit
        // check if le != 0 <-- no response expected
        if (leUnprotected == 0) {
            ISOException.throwIt(ISO7816.SW_WRONG_LENGTH);
        if (selectedFile == null) {
            ISOException.throwIt(ISO7816.SW_FILE_NOT_FOUND);
        if ((selectedFile.getAccessConditions() & READ_REQUIRES_SM) == READ_REQUIRES_SM) {
            if(!protectedApdu)
               ISOException.throwIt(ISO7816.SW_SECURITY_STATUS_NOT_SATISFIED);
        short fileSize = (short) selectedFile.getFileLength();
        // check offset
        if (offset >= fileSize) {
            ISOException.throwIt(ISO7816.SW_INCORRECT_P1P2);
        // check expected length
        if ((short) (offset + leUnprotected) > fileSize) {
            ISOException.throwIt(ISO7816.SW_WRONG_LENGTH);
            //ISOException.throwIt(SW_TAMAM);
        short bufferOffset = 0;
        crypto.setEncryptionStatus(isSelectedFileEncrypted());
        if (protectedApdu) {
            bufferOffset = crypto.getApduBufferOffsetDT(leUnprotected);
            if(isSelectedFileEncrypted())
               bufferOffset = crypto.getApduBufferOffset(leUnprotected);
            apdu.setOutgoing();
        Util.arrayCopyNonAtomic(selectedFile.getData(), offset, buffer, bufferOffset, leUnprotected);
        return leUnprotected;
     * Processes and UPDATE_BINARY apdu. Writes data in the currently selected
     * file.
     * @param apdu
     *            carries the offset where to write date in header bytes p1 and
     *            p2.
    private void processUpdateBinary(APDU apdu, boolean protectedApdu) {
        if (!hasFileSelected() || isLocked()) {
            ISOException.throwIt(ISO7816.SW_COMMAND_NOT_ALLOWED);
        if ((selectedFile.getAccessConditions() & DigitalTachograph.UPDATE_ALW) != DigitalTachograph.UPDATE_ALW) {
            if ((selectedFile.getAccessConditions() & DigitalTachograph.UPDATE_REQUIRES_SM) != DigitalTachograph.UPDATE_REQUIRES_SM) {
                ISOException.throwIt(ISO7816.SW_SECURITY_STATUS_NOT_SATISFIED);
                return;
            }else if(!protectedApdu){
                    ISOException.throwIt(ISO7816.SW_SECURITY_STATUS_NOT_SATISFIED);
        byte[] buffer = apdu.getBuffer();
        byte p1 = buffer[OFFSET_P1];
        byte p2 = buffer[OFFSET_P2];
        short offset = Util.makeShort(p1, p2);
        short readCount = (short) (buffer[ISO7816.OFFSET_LC] & 0xff);
        //if (!protectedApdu){
            readCount = apdu.setIncomingAndReceive();
        while (readCount > 0) {
            selectedFile.writeData(offset, buffer, OFFSET_CDATA, readCount);
            offset += readCount;
            readCount = apdu.receiveBytes(ISO7816.OFFSET_CDATA);
    private short processInternalAuthenticate(APDU apdu , boolean protectedApdu) throws CryptoException {
        byte[] buffer = apdu.getBuffer();
        short lc = (short) (buffer[OFFSET_LC] & 0xFF);
        if (lc != (short) (KID_LENGTH * 2)) {
            ISOException.throwIt(SW_WRONG_LENGTH);
        if (apdu.setIncomingAndReceive() != lc) {
            ISOException.throwIt(ISO7816.SW_WRONG_DATA);
        // Check if VU.CHR maches the one of the selected certificate on the card
        if (Util.arrayCompare(buffer, (short) (OFFSET_CDATA + KID_LENGTH), keyStore.selected_KID, (short) 0, KID_LENGTH) != 0) {
            ISOException.throwIt(SW_REFERENCE_DATA_NOT_FOUND);
        if (Util.arrayCopyNonAtomic(buffer, OFFSET_CDATA, Rnd1, (short) 0, (short) 8) != (short) 8) { // Receive Rnd1
            ISOException.throwIt(ISO7816.SW_WRONG_DATA);
        // Hash(PRnd2||K1||Rnd1||VU.CHR)
        random.generateData(PRnd2, (short) 0, (short) 90);
        random.generateData(K1, (short) 0, (short) 16);
        crypto.shaDigest.update(PRnd2, (short) 0, (short) 90); // PRnd2
        crypto.shaDigest.update(K1, (short) 0, (short) 16); // PRnd2||K1
        crypto.shaDigest.doFinal(buffer, OFFSET_CDATA, lc, digest, (short) 0); //Rnd1||VU.CHR
        BigNumber mod = new BigNumber((short) 128);
        mod.init(keyStore.Card_PubMod, (short) 0, (short) keyStore.Card_PubMod.length, BigNumber.FORMAT_HEX);
        mod.subtract(signed, (short) 0, (short) 128, BigNumber.FORMAT_HEX);
        if (mod.compareTo(signed, (short) 0, (short) 128, BigNumber.FORMAT_HEX) == -1) {
            mod.toBytes(signed, (short) 0, (short) 128, BigNumber.FORMAT_HEX);
        // To be added: if the selected private key is considered corrupted, the processing state returned is '6400' or '6581'.
        signed[0] = (byte) 0x6A;
        Util.arrayCopyNonAtomic(PRnd2, (short) 0, signed, (short) 1, (short) 90);
        Util.arrayCopyNonAtomic(K1, (short) 0, signed, (short) 91, (short) 16);
        Util.arrayCopyNonAtomic(digest, (short) 0, signed, (short) 107, (short) 20);
        signed[127] = (byte) 0xBC;
        if (!keyStore.cardPrivateKey.isInitialized()) {
            CryptoException.throwIt(CryptoException.ILLEGAL_VALUE);
        try {
            crypto.rsaSigner.init(keyStore.cardPrivateKey, Signature.MODE_SIGN);
            crypto.rsaSigner.doFinal(signed, (short) 0, (short) 128, signed, (short) 0);
        } catch (Exception e) {
            ISOException.throwIt(SW_REFERENCE_DATA_NOT_FOUND);
        if (!keyStore.selectedPublicKey.isInitialized()) {
            CryptoException.throwIt(CryptoException.ILLEGAL_VALUE);
        try {
            crypto.rsaCipher.init(keyStore.selectedPublicKey, Cipher.MODE_ENCRYPT);
            crypto.rsaCipher.doFinal(signed, (short) 0, (short) 128, signed, (short) 0);
        } catch (Exception e) {
            ISOException.throwIt(SW_REFERENCE_DATA_NOT_FOUND);
        apdu.setOutgoing();
        Util.arrayCopyNonAtomic(signed, (short) 0, buffer, (short) 0, (short) 128);
        return (short) signed.length;
    private void processExternalAuthenticate(APDU apdu) {
        short equipmentType = 0;
        if (keyStore.Selected_Cert != null) {
            equipmentType = (short) keyStore.Selected_Cert.CHA[6]; // check equipment type
        if (equipmentType != (short) 1 && equipmentType != (short) 2 && equipmentType != (short) 3 && equipmentType != (short) 4 && equipmentType != (short) 6) {
            ISOException.throwIt(ISO7816.SW_FUNC_NOT_SUPPORTED); // Instead of 6F00 throw a more meaningfull SW in case CHA is not valid.
        if (Util.arrayCompare(keyStore.Selected_Cert.CHA, (short) 0, TACHOGRAPH_AID, (short) 0, (short) 6) != 0) {
            ISOException.throwIt(ISO7816.SW_FUNC_NOT_SUPPORTED);
        byte[] buffer = apdu.getBuffer();
        byte p1 = (byte) (buffer[OFFSET_P1] & 0xff);
        byte p2 = (byte) (buffer[OFFSET_P2] & 0xff);
        if (p1 != 0 || p2 != 0) {
            ISOException.throwIt(SW_WRONG_P1P2);
        short lc = (short) (buffer[OFFSET_LC] & 0xFF);
        if (lc != (short) (128)) {
            ISOException.throwIt(SW_WRONG_LENGTH);
        if (apdu.setIncomingAndReceive() != lc) {
            ISOException.throwIt(ISO7816.SW_WRONG_DATA);
        Util.arrayCopyNonAtomic(buffer, OFFSET_CDATA, signed, (short) 0, (short) 128); // receive the cryptogram from the VU
        // decrypt the encrypted message with the card private key
        try {
            crypto.rsaCipher.init(keyStore.cardPrivateKey, Cipher.MODE_DECRYPT);
            crypto.rsaCipher.doFinal(signed, (short) 0, (short) 128, signed, (short) 0);
        } catch (Exception e) {
            ISOException.throwIt(SW_REFERENCE_DATA_NOT_FOUND);
        // verify the signature with the VU public key
        try {
            crypto.rsaCipher.init(keyStore.selectedPublicKey, Signature.MODE_VERIFY); // Cipher.MODE_ENCRYPT
            crypto.rsaCipher.doFinal(signed, (short) 0, (short) 128, signed, (short) 0);
        } catch (Exception e) {
            ISOException.throwIt(SW_REFERENCE_DATA_NOT_FOUND);
        if (signed[0] != (byte) 0x6A || signed[127] != (byte) 0xBC) {
            ISOException.throwIt(Util.makeShort(signed[0], signed[127]));
        try {
            verifyCardCertificates();
            Util.arrayCopyNonAtomic(signed, (short) 1, preDigest, (short) 0, (short) 106); // accumulate preDigest
            Util.arrayCopyNonAtomic(Rnd3, (short) 0, preDigest, (short) 106, (short) 8); // accumulate preDigest
            Util.arrayCopyNonAtomic(keyStore.Card_Cert.CHR, (short) 0, preDigest, (short) 114, (short) 8); // accumulate preDigest
            Util.arrayCopyNonAtomic(signed, (short) 91, K2, (short) 0, (short) 16); // receive K2 value
            crypto.shaDigest.update(signed, (short) 1, (short) 106); // PRnd4||K2
            crypto.shaDigest.update(Rnd3, (short) 0, (short) 8); // Rnd3
            crypto.shaDigest.doFinal(keyStore.Card_Cert.CHR, (short) 0, (short) 8, digest, (short) 0); //||Card.CHR
        } catch (Exception e) {
            ISOException.throwIt(SW_TAMAM);
        if (Util.arrayCompare(signed, (short) 107, digest, (short) 0, (short) 20) != 0) {
            ISOException.throwIt(SW_TAMAM);
        volatileState[0] |= MUTUAL_AUTHENTICATED;
        try {
            DTUtil.xor(K1, (short) 0, K2, (short) 0, KaKb, (short) 0, (short) 16);
            Util.arrayCopyNonAtomic(Rnd3, (short) 4, SSC, (short) 0, (short) 4); // tail of Rnd3
            Util.arrayCopyNonAtomic(Rnd1, (short) 4, SSC, (short) 4, (short) 4); // tail of Rnd1
        } catch (Exception e) {
            ISOException.throwIt(SW_TAMAM);
        try {
            keyStore.setKey_Ka(KaKb, (short) 0);
            keyStore.setKey_Kb(KaKb, (short) 8);
            keyStore.setSecureMessagingKeys(KaKb, (short) 0, KaKb, (short) 0);
        } catch (Exception e) {
            ISOException.throwIt(SW_TAMAM_DEGIL);
        return;
    private short returnPreDigest(APDU apdu) {
        byte[] buffer = apdu.getBuffer();
        apdu.setOutgoing();
        Util.arrayCopyNonAtomic(preDigest, (short) 0, buffer, (short) 0, (short) 122);
        return (short)preDigest.length;
    private short returnDigest(APDU apdu) {
        byte[] buffer = apdu.getBuffer();
        apdu.setOutgoing();
        Util.arrayCopyNonAtomic(digest, (short) 0, buffer, (short) 0, (short) 20);
        return (short)digest.length;
    private short returnOriginalText(APDU apdu) {
        byte[] buffer = apdu.getBuffer();
        apdu.setOutgoing();
        Util.arrayCopyNonAtomic(signed, (short) 0, buffer, (short) 0, (short) 128);
        return (short)signed.length;
    private void processVerify(APDU apdu) { // Verify_CHV(Pin_Ws)
        byte[] buffer = apdu.getBuffer();
        // retrieve the PIN data for validation.
        byte byteRead = (byte) (apdu.setIncomingAndReceive());
        // the PIN data is read into the APDU buffer
        // at the offset ISO7816.OFFSET_CDATA the PIN data length = byteRead
        if (pin.check(buffer, ISO7816.OFFSET_CDATA, byteRead) == false) {
            ISOException.throwIt(SW_VERIFICATION_FAILED);
        return;
    private void processPSO(APDU apdu) { // verify certificate
        byte[] buffer = apdu.getBuffer();
        byte p1 = (byte) (buffer[OFFSET_P1] & 0xff);
        byte p2 = (byte) (buffer[OFFSET_P2] & 0xff);
        short lc = (short) (buffer[ISO7816.OFFSET_LC] & 0xFF);
        if (p1 == (byte) 0x00 && p2 == P2_VERIFYCERT) {
            if (lc != TACHO_CERT_LENGTH) {
                ISOException.throwIt(SW_WRONG_LENGTH);
            if (apdu.setIncomingAndReceive() != lc) {
                ISOException.throwIt(ISO7816.SW_WRONG_LENGTH);
            try { // copy the certificate to be verified from APDU buffer to cert object
                Util.arrayCopyNonAtomic(buffer, OFFSET_CDATA, cert, (short) 0, lc);
            } catch (Exception e) {
                ISOException.throwIt(SW_TAMAM);
            if (Util.arrayCompare(keyStore.selected_KID, (short) 0, keyStore.ERCA_KID, (short) 0, KID_LENGTH) == 0) {
                keyStore.VUCA_Cert.verifyCert(cert, keyStore.selectedPublicKey, keyStore.selected_KID);
            } else if (Util.arrayCompare(keyStore.selected_KID, (short) 0, keyStore.VUCA_Cert.CHR, (short) 0, KID_LENGTH) == 0) {
                keyStore.VU_Cert.verifyCert(cert, keyStore.selectedPublicKey, keyStore.selected_KID);
            } else {
                ISOException.throwIt(SW_CERT_VERIFICATION_FAILED); // Selected keyId, with MSE, is neither ERCA_KID nor VUCA_KID
        } else {
            ISOException.throwIt(SW_CERT_VERIFICATION_FAILED);
        return;
    private short processGetChallenge(APDU apdu, boolean protectedApdu) {
        byte[] buffer = apdu.getBuffer();
        byte p1 = (byte) (buffer[OFFSET_P1] & 0xff);
        byte p2 = (byte) (buffer[OFFSET_P2] & 0xff);
        if (p1 != 0 || p2 != 0) {
            ISOException.throwIt(SW_WRONG_P1P2);
        random.generateData(Rnd3, (short) 0, (short) 8);
        short Le = apdu.setOutgoing();
        if (Le != (short) 8) {
            ISOException.throwIt(SW_WRONG_LENGTH);
        Util.arrayCopyNonAtomic(Rnd3, (short) 0, buffer, (short) 0, (short) 8);
        return Le;
    private void processMSE(APDU apdu) {
        byte[] buffer = apdu.getBuffer();
        if (buffer[OFFSET_P1] == (byte) 0xC1 && buffer[OFFSET_P2] == P2_DST) {
            short lc = (short) (buffer[OFFSET_LC] & 0xFF);
            if (lc != (short) (KID_LENGTH + 2)) {
                ISOException.throwIt(SW_WRONG_LENGTH);
            if (apdu.setIncomingAndReceive() != lc) {
                ISOException.throwIt(ISO7816.SW_WRONG_DATA);
            if (buffer[OFFSET_CDATA] != (byte) 0x83) {//check the tag of the data
                ISOException.throwIt(SW_SECURE_MESSAGING_DATA_OBJECTS_MISSING);
            } else if (buffer[OFFSET_CDATA + 1] != (byte) 0x08) {
                ISOException.throwIt(SW_INCORRECT_DATA_OBJECT); // check if the key is already selected one
            } else if (Util.arrayCompare(buffer, (short) (OFFSET_CDATA + 2), keyStore.selected_KID, (short) 0, KID_LENGTH) != 0) {
                if (Util.arrayCompare(buffer, (short) (OFFSET_CDATA + 2), keyStore.ERCA_KID, (short) 0, KID_LENGTH) == 0) {// KID is EUR_KID
                    keyStore.selected_KID = keyStore.ERCA_KID;
                    keyStore.selectedPublicKey = keyStore.eurPublicKey;
                    keyStore.Selected_Cert = null; // ERCA public key is selected
                    return;
                } else if (Util.arrayCompare(buffer, (short) (OFFSET_CDATA + 2), keyStore.VUCA_Cert.CHR, (short) 0, KID_LENGTH) == 0) {// KID is MSCA_KID
                    keyStore.Selected_Cert = keyStore.VUCA_Cert;
                } else if (Util.arrayCompare(buffer, (short) (OFFSET_CDATA + 2), keyStore.VU_Cert.CHR, (short) 0, KID_LENGTH) == 0) { // KID is VU_KID
                    keyStore.Selected_Cert = keyStore.VU_Cert;
                } else {
                    ISOException.throwIt(SW_REFERENCE_DATA_NOT_FOUND);
                }// KID not found
                keyStore.selectedPublicKey = keyStore.Selected_Cert.publicKey;
                keyStore.selected_KID = keyStore.Selected_Cert.CHR;
            } else { // if the KID is already set, just return
                return;
        } else {
            ISOException.throwIt(ISO7816.SW_WRONG_P1P2);
    private void processSelectFile(APDU apdu) {
        byte[] buffer = apdu.getBuffer();
        short lc = (short) (buffer[OFFSET_LC] & 0x00FF);
        // retrieve p1p2 from apdu buffer
        byte p1 = buffer[OFFSET_P1];
        byte p2 = buffer[OFFSET_P2];
        short p1p2 = Util.makeShort(p1, p2);
        apdu.setIncomingAndReceive();
        if (p1 == 4) {
            if (lc == (short) TACHO_AID_LENGTH) {
                if (Util.arrayCompare(buffer, (short) OFFSET_CDATA, TACHOGRAPH_AID, (short) 0, (short) TACHO_AID_LENGTH) == 0) {
                    selectedFile = fileSystem.getDT();
                    fileSystem.selectDT();
                    volatileState[0] |= FILE_SELECTED;
                    return;
                } else {
                    ISOException.throwIt(ISO7816.SW_WRONG_DATA);
            } else if (lc != 2) {
                ISOException.throwIt(SW_WRONG_LENGTH);
            short fid = Util.getShort(buffer, OFFSET_CDATA);
            if (fileSystem.getFile(fid) != null) {
                selectedFile = fileSystem.getDT();
                fileSystem.selectDT();
                volatileState[0] |= FILE_SELECTED;
                return;
        } else if (p1 == 2) {
            if (lc != 2) {
                ISOException.throwIt(SW_WRONG_LENGTH);
            short fid = Util.getShort(buffer, OFFSET_CDATA);
            if (fileSystem.getFile(fid) != null) {
                selectedFile = fileSystem.getFile(fid);
                volatileState[0] |= FILE_SELECTED;
                return;
        } else {
            ISOException.throwIt(ISO7816.SW_WRONG_P1P2);
        setNoFileSelected();
        ISOException.throwIt(ISO7816.SW_FILE_NOT_FOUND);
    public static void setNoFileSelected() {
        if (hasFileSelected()) {
            volatileState[0] ^= FILE_SELECTED;
    public static boolean hasFileSelected() {
        return (volatileState[0] & FILE_SELECTED) == FILE_SELECTED;
    public static boolean hasMutuallyAuthenticated() {
        return (volatileState[0] & MUTUAL_AUTHENTICATED) == MUTUAL_AUTHENTICATED;
    static boolean isLocked() {
        return (persistentState & LOCKED) == LOCKED;
    public boolean isSelectedFileEncrypted() {
        return ((selectedFile.getAccessConditions() & DigitalTachograph.ENCRYPTED) == DigitalTachograph.ENCRYPTED);
}

Feedback Form for SAP NetWeaver Gateway development tools

Hi all, if you wish to send your feedback (bug, new feature, and general feedback) to SAP NetWeaver Gateway development tools u2013 Xcode, Visual Studio, Blackberry, Search console, please use the attached feedback forms:
For Xcode and Visual Studio tools please use Feedback form XC&VS.rtf
For Eclipse, Blackberry and Search console please use Feedback form BB&SC.rtf

Hi Michal,
While installing the Netweaver gateway plugin for eclipse Juno version through the following link
https://tools.hana.ondemand.com/juno under Help -> Install New Software... I have encountered below error.
Can you please help me in resolving it.
An error occurred while collecting items to be installed
session context was:(profile=epp.package.jee, phase=org.eclipse.equinox.internal.p2.engine.phases.Collect, operand=, action=).
Unknown Host: https://tools.hana.ondemand.com/juno/features/com.sap.core.editor.feature_1.0.6.jar
tools.hana.ondemand.com
Many thanks in advance.
Regards,
Parthi

CS3 ILLUST Missing required plugins BRS Pencil Tool ExpandS

Have installed a demo disk for CS3 that came from Adobe.
Illustrator doesn't work!
Get the message..."Missing required plugins BRS Pencil Tool ExpandS"
I found this link but it was for "BRS Pencil Tool Pathfinder Suite"
http://kb.adobe.com/selfservice/viewContent.do?externalId=331889&sliceId=2
any info on this!

Not sure it exactly the same (this mentions CS2/3) but...
http://helpx.adobe.com/illustrator/kb/error-missing-required-plugins-brs.html

Missing required plugins BRS Pencil Tool ExpendS. Anyone

Hi all,
My Illustrator CS5 cannot open anymore because the required plugin BRS Pencil Tool ExpendS is missing.
Is there anyone who has occurred the same problem before? Where can I download the missing plugin? Is there a fast way to get it up and running?
Thank you for your help, I am not an expert and shall appreciate your suggestions on this forum.
Best wishes,
Simone

Not sure it exactly the same (this mentions CS2/3) but...
http://helpx.adobe.com/illustrator/kb/error-missing-required-plugins-brs.html

ATG development tools in Eclipse

Hi,
Need information on where to find the ATG Development tools for eclipse.
Below chapter refers to non-existent url (http://www.atg.com/eclipse)
http://docs.oracle.com/cd/E23095_01/Platform.93/ATGInstallGuide/html/s0108installingatgdevelopmenttoolsfor01.html
Thanks,
Rashmi

Hi All,
I am new to ATG development and came to know that "ATG development Plugin" for Eclipse is needed for developing ATG application development using eclipse.
Unfortunately I am not able download the plugin from www.atg.com.
I would highly appreciate if someone post the link to download the same.
Thanks and Regards
Antony B

Quicktime plugin (importer) development for MSWindows

Hello,
I have the impression that Quicktime for MS Windows supports importer plugins just as the Mac OS X version does, but I can't seem to find any information on how to develop them.
Nor can I find a way to download the SDK I'd undoubtedly need (or anything else on the Developer site ... do we have to pay nowadays to get access to even basic development tools & stuff???)
TIA,
René

Almost there, I hope.
Found a 7.1 version of the Quicktime SDK, which seems to contain everything needed, except a rules set (or something like that) for telling MSVC what to do with .r files. Don't know if such a goodie exists, though.
I almost got Apple's SlideShowImporter example to build, using a project/solution I made from scratch (gleaning some hints from the XiphQT one ... quite proud of myself I cooked up the patience to deal with MSVC ). I see there's a specific MSWin download of that example, going to see if I can get all the way with that one.

Getting this erro "*** Developer Tools: Reading sites for user: fwadmin returned status: Forbidden"

hi,
After intrgrating with Webcenter site with EClipse using CSDT plugin. When i tries to create a template using eclipse IDE. And when i click on 'Create New Template' icon on eclipse , I am getting error "*** Developer Tools: Reading sites for user: fwadmin returned status: Forbidden"
Thanks,
Kumar

Hello,
Check if your user has correct permission or not.
User must of part of RestAdmin group. Read here- http://docs.oracle.com/cd/E29542_01/doc.1111/e29634/dt_quickstart.htm#WBCSD942
Regards,
Guddu

DocFlex/Javadoc 1.5.6, a multi-format doclet development tool and more

DocFlex/Javadoc is both a multi-format Javadoc Doclet and a rapid doclet development tool, which allows easy creation of professional quality Java API documentation generated by Javadoc in various output formats.
More in this article:
Key Features
Availability
This Version
What is DocFlex?
Main Concepts
Other Applications
Links
KEY FEATURES
Template-driven doclet architecture
- Actual doclets are created in the form of special templates interpreted by the DocFlex Doclet, which is the template interpreter / output generator wrapped in the form of a Javadoc Doclet.
- The high quality graphic Template Designer allows you to visually design most of things, whose development was possible so far only by direct Java coding.
- The templates are designed independently on a particular output format. All formatting is specified in some universal way using properties of template components. During the generation, it is rendered with the suitable features available in the selected output format.
- The elaborated support of template parameters (including multivalued list parameters). The parameters are defined and accessed within templates to adjust dynamic properties of template components. Most of options previously used to control an ordinary doclet now simply become template parameters!
- The possibility to call templates from one another. This feature (along with the template parameters) makes possible re-using the same templates for different tasks as well as organizing template libraries.
Data processing
- The entire Doclet API is represented in the form of a virtual XML document (called Doclet DSM), on which the designing and processing of all templates is based.
- Sophisticated capabilities for data querying and sorting based on an extension of XPath.
- Full support of new Java 5.0 language features: Generic Types, Enums, Annotations.
- Simultaneous support of Java 1.4 and Java 5.
Creating hyperlinks
- Generation of an extensive network of hyperlinks interconnecting the whole documentation.
- The hyperlinks can be generated in all output formats that support them (this currently includes HTML and RTF).
- The universal way of defining documentation cross-links based on the link/target keys specified in templates.
- In RTF, the cross-links can be generated in the form of page number references, which effectively makes them usable even in the printed documentation.
- In HTML, the possibility of loading several frame windows from a single hyperlink at once.
Universal support of various formatting techniques
- text formatting: fonts, colors, borders
- paragraph formatting: margins, pagination control, borders, colors
- border formatting: styles (solid, double, dashed, dotted), thickness, colors
- tables: arbitrary cell layouts, borders, nested tables
- lists: bulleted, numbered, delimited
- document fields (RTF): page number, number of pages, TOC, etc.
- page formatting: size, orientation, margins, headers/footers
- formatting styles
- rendering of embedded HTML, which means interpreting in non-HTML output formats (such as RTF) the HTML tags embedded in text data (e.g. documentation comments). Almost all HTML tags practically usable in doc-comments are supported.
Inserting images
- statically specified in templates
- dynamically, obtained by <img> tags found in Java comments
- supported image formats: GIF, PNG, JPG, WMF, EMF, BMP
Output formats
- HTML (both framed multi-file and single-file output)
- RTF (version 1.6 - supported since Word 2000).
- TXT (plain text), which may be particularly useful for various utilizations of the Java code information provided by the Doclet API generate XML files by it, or SQL files to import into a database).
Standard Template Set
- The ready-to-use Standard Template Set included in all editions of DocFlex/Javadoc allows you to immediately generate:
(*) The framed HTML Java API documentation similar to that generated by the standard Javadoc.
(*) The same documentation packed in a single HTML file.
(*) The unmatched quality RTF JavaDoc.
- Special features supported by standard templates:
(*) Excluding classes/methods/fields by custom tags and annotations.
(*) Selective omitting of package qualifiers.
(*) Selective documenting of custom tags (similar to -tag option of Standard Doclet).
- By modifying the standard templates, you can quickly customize the generated documentation according to your needs.
Doclet GUI
- Besides command line options, DocFlex Doclet supports an alternative user-friendly way to control the template-based doclets interactively -- the high quality Doclet GUI.
- The Doclet GUI starts with the Generator Dialog, where you can specify all general settings (such as the main template, the output format and the output directory), start the generation, track its progress and stop at any moment you need.
- The grid-tree-based Parameter Inspector invoked from the Generator Dialog for a selected template allows you to view the descriptions of all template parameters controlling the doclet and set their values according to the parameter data types.
- The generator options specific for the selected output format can be set in the corresponding Format Option Inspector (also invoked from the Generator Dialog).
- Once the generation is finished (or cancelled), you can start it again with different settings or a new main template without restarting the whole Javadoc.
Integrations
- With any system that runs Javadoc (in particular, see below)
- Apache Ant
- Apache Maven 2
- Eclipse
For lots more information, see DocFlex/Javadoc homepage: [http://www.filigris.com/products/docflex_javadoc/]
AVAILABILITY
DocFlex/Javadoc comes in two editions:
(1) The full edition called "DocFlex/Javadoc" as it is. This is commercial software, which includes all the implemented functionality.
(2) The reduced freeware edition called "DocFlex/Doclet". It includes only the output generator and can be used as an interpretor of any custom templates. It also includes the standard template set, which allows you to instantly use it as an HTML doclet (similar to the standard one, however with some special features) plus an excellent quality RTF doclet.
Both editions are available for downloads on the page: [http://www.filigris.com/downloads/]
THIS VERSION
New features:
- The template interpretor works 15-20% faster
- Improvement of RTF output
- Multi-valued (list) template parameters
- Custom elements
- Standard Templates: Selective documenting of custom tags (similar to -tag option of standard doclet)
For more details, see product Readme | Change Log on the downloads page: [http://www.filigris.com/downloads/]
WHAT IS DOCFLEX?
DocFlex is an innovative technology for development of high quality template-driven documentation/report generators by any kind of data obtained from various software applications via the Java APIs they provide.
MAIN CONCEPTS
The whole DocFlex technology is based on four generalizations:
(1) The mapping of an entire Java API onto a virtual XML-like representation made of some elements and attributes so as to process any such a representation in a universal way using techniques borrowed from the field of XML, like XPath (or more precisely, a conceptual analogue of XPath with some extensions not present in it).
(2) The abstract formatting concept based on four layouts (flow of text, flow of paragraphs or paragraph-like objects, tables and lists), which can be rendered in most modern document formats (e.g. HTML, RTF, XSL-FO etc.)
(3) The automatic generation of hyperlinks (or their page number reference equivalents) by matching the sets of keys produced from certain natural properties of the things (entities) being documented and hyper-linked.
(4) The representation of the object controlling structure of the output generator (made on the first three principles) in the form of a plain-text template with a possibility to create and edit such templates using a graphic Template Designer, which visualizes the controlling objects (now becoming template components) in a form resembling the output they will produce.
OTHER APPLICATIONS
In fact, DocFlex/Javadoc is not the only application of DocFlex technology. The following is a summary of other DocFlex software:
DocFlex/XML
The SDK and runtime environment for rapid development and execution of template-driven automatic documentation/report generators by any data obtained from XML files.
This is currently the most complex and advanced application of DocFlex technology. Actually, this tool can be considered a powerful alternative to XSLT. At least, it is definitely able to do what XSLT apparently not (for example, see XSDDoc below). We will publish a more detailed comparison DocFlex/XML versus XSLT with the next DocFlex/XML release, which is coming very soon.
DocFlex/XML home page: [http://www.filigris.com/products/docflex_xml/]
DocFlex/XML | XSDDoc
A template set for DocFlex/XML that implements a high quality W3C XML Schema documentation generator in HTML and RTF output formats.
For more details, please see: [http://www.filigris.com/products/docflex_xml/xsddoc/]
DocFlex/XML | WSDLDoc
A similar template set for DocFlex/XML that will implement a high-end WSDL documentation generator.
This product is not released yet.
DocFlex/Together
A template-driven documentation generator for [Borland Together|http://www.borland.com/us/products/together/] (which is a UML modeling tool).
This is the earliest application of DocFlex technology and probably the most beautiful one. It works only with Together Architect 1.x, which is now obsolete. Unfortunately, since Together 2005, Borland eliminated any open APIs (for unknown reasons). Because of this, further development of DocFlex/Together was impossible.
DocFlex/Together home page: [http://www.filigris.com/products/docflex_together/]
See also examples of the UML documentation generated with it: [http://www.filigris.com/products/docflex_together/examples/]
The future DocFlex/UML is going to generate something like this as well.
DocFlex/UML
A template-driven UML documentation generator based on [Eclipse EMF|http://www.eclipse.org/emf/]. This tool is in early development stage yet. In a sense, it will continue DocFlex/Together with the focus on integration with other UML tools that use Eclipse EMF.
LINKS
This original article can be found at:
[http://www.filigris.com/ann/docflex_javadoc_v1.5.6/]
DocFlex/Javadoc home page:
[http://www.filigris.com/products/docflex_javadoc/]
DocFlex/XML home page:
[http://www.filigris.com/products/docflex_xml/]
DocFlex/XML | XSDDoc, the XML schema documentation generator:
[http://www.filigris.com/products/docflex_xml/xsddoc/]
Free downloads:
[http://www.filigris.com/downloads/]

Now, DocFlex/Javadoc v1.4 has been released specifically dedicated to Linux (Mac OS X) support:
(*) Some early bugs have been fixed, which prevented it working properly under Linux.
(*) A special RTF option was introduced to generate OpenOffice.org friendly RTF (see below)
(*) Improved support for external document viewers.
(*) Now, DocFlex/Javadoc software includes the shell script files prepared to quickly install and launch it under Linux
New RTF option
A new RTF output option "Tune output for MS Word� has been introduced. This option, actually, allows switching off that very tuning (which until now was the default mode) to produce an RTF friendly to open with other non MS Word applications, e.g. OpenOffice.org Writer under Linux.
Read full announcement (and screenshot) by this link:
http://www.filigris.com/ann/docflex_javadoc_v1.4/
Regards,
Leonid Rudy
http://www.docflex.com

Error while installing SAP Widget Developer tool.zip on Eclipse Java EE IDE

Hello,
          I am new to SAP widget. I hav installed "Eclipse Java EE IDE for Web Developers" from eclipse.org and now when i was trying to install SAP Widget Developer tool.zip add-on as stated in the SAP Enterprise Widget Development Guide
--> http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/c032ae0a-7d6b-2a10-14a1-cc6efb066dfc
I get this error at the last stage of installation.
Cannot complete the install because one or more required items could not be found.
Software currently installed: SAP Widget Development Tools 0.13.0.1376 (corp.sap.pal.gadgets.tools.widgetTools.feature.group 0.13.0.1376)
Missing requirement: SAP Widget UI Designer 0.13.0.1376 (corp.sap.pal.gadgets.tools.uidesigner 0.13.0.1376) requires 'bundle org.eclipse.wst.javascript.core 0.0.0' but it could not be found
Cannot satisfy dependency:
    From: SAP Widget UI Designer 0.13.0.1376 (corp.sap.pal.gadgets.tools.uidesigner.feature.group 0.13.0.1376)
    To: corp.sap.pal.gadgets.tools.uidesigner [0.13.0.1376]
Cannot satisfy dependency:
    From: SAP Widget Development Tools 0.13.0.1376 (corp.sap.pal.gadgets.tools.widgetTools.feature.group 0.13.0.1376)
    To: corp.sap.pal.gadgets.tools.uidesigner.feature.group [0.13.0.1376]
Please helo me to get this error fixed.
Thank you very much.
Anil Raparthi.

Hi,
The newest and default version of Eclipse is Galileo which is version 3.5.x
According to the Widget development guide, widget developer tool covers Eclipse 3.3.x (Europa) and 3.4.x (Galileo).
The problem is solved by downloading one of those versions from http://wiki.eclipse.org/Older_Versions_Of_Eclipse and installing widget development tools.
Regards,
Jolanta Gniadek

Tns problem with Oracle 11g ODAC 11.1.0.6.21 with Oracle Developer Tools

I installed the full
Oracle 11g ODAC 11.1.0.6.21 with Oracle Developer Tools for Visual Studio
now I am at the good old "[ORA-12154: TNS:could not resolve the connect identifier specified]" error.
I copied the same tnsnames.ora as used on the db server
onto the client "C:\Oracle\product\11.1.0\client_2\Network\Admin".
The host name is right since a normal ping works. TNSping is not available.
but I get the [ORA-12154: TNS:could not resolve the connect identifier specified] error.
The listener is running and the instance as well since it all works on the source server.
I tried it with
SET path=c:\oracle\product\11.1.0\client_2\bin
but tnsping is still not recognized.
sqlplus works on the other hand when I set it to
SET path=c:\oracle\product\11.1.0\client_2\
what is going on...

hey
u can post your query here, and i think everyone here is to share opinion so do not hesitate to do so and please try to google before posting here,
and we know no one is expert like some people saying 'boring questions' you just try to overcome your problem and you will definitly get your problem solved .
some mpeople ar still there who answeres hopeless questions and say nothing about them but when a fresher askin a qustion is not tolarated by them they think everyone is born DBA here
they always tend to discouraging people here on forums,and i think they are vvolunteers to reduce crowd here on forums, inspite of there experience and people respect them they can not control their anger
so please post you tns here, i think there are ways to ask people to google and search docs first, but not like this
thanks and regards
VD
Edited by: vikrant dixit on Jun 29, 2009 4:33 AM

Illustrator CC Plugins: CC DEVELOPER TOOLS?

Similar Messages

Maybe you are looking for