Illustrator clipping mask creating white fill?!!!

Hi all,
So basically i have designed the top of a paper plane and have completed the top design which i now want to clip into the template using the clipping mask tool. I have used it exactly how it is supposed to'
1. firstly getting my shape that i want to use to clip exactly how i want it
2. then getting my image which i want to place under my first shape to use the clipping mask with
3. align it in place and bring my "shape" to the front and image to the back
then using the selection tool i select all objects then click
objects> clipping mask> make
and for some reason it clips it but the image that i wastring to clip just becomes a white fill...
i have no idea how to fix this and its driving me crazy,, i cant find a soloution no matter how long i try to fix it or research it..
i have included some screenshots below

Hi thanks so much for that! yes i did as you asked and it seems to work if i complete a rectangle clipping mask! but as soon as i copy it over and try it with my original shape, it doesnt work.... i think there is something wrong with what i have created as i showed in my last screen shot, even when i try to create a fill for my shape that i have made and am trying to use for the clipping mask it doesnt fill,, even though t says it is "filled" pink however when i completed the rectangle it had a fill of white so i knew it was ontop and that it would work,,, which isnt really happening with my shape, as it doesnt have a fill even when it says it does

Similar Messages

Help with Illustrator Clipping Mask!

Hi,
I am trying to make a clipping mask over a alot of vectors (to be specific, have made an envelope design so am trying to use the template/evenlope outline as the clipping path) however when ever I try to create the clipping mask - command 7 - all the vectors inside are deleted mostly or half dissapear.
I have tried;
Making sure the clipping path is the top layer in the layers panel
Ungrouping the vectors and selecting individually to mask all together
Putting all into a new document and clipping
Seperating the clipping path and what I want to clip into differnt layers
None of the above has worked as yet, I have done this plenty of times before but am not sure what I am over looking. I am using CS5 on a mac.
Thanks for anyones help!
here is what I am trying to do; I need all of the vecotrs to be masked by the envelope outline.

I you are using a template in AI CS 4 or 5 then it is possible thgat the template is an artboard which you cannot use as a clipping mask.
You would have to draw a rectaangle to the size of the enevelope template and use that rectangle path as a clipping mask.
Ok! Besides from that possibility if yiou are printing an envelope withy objects that have to be clipped to the edge of the front of the enevelope that is not a very good idea.
Even if you are printing and then converting the envelope it is a bad idea as you8 would definitely need a bleed and that would wrap around to the back of the envelope and in a nott so pretty way.
OK so say you are using an inkjet that can print on an envelope and it can even successfu8lly print it with a bleed feature the way thoise bleed features have to work is that they enlarge the art slightly and so whyat every you design and create will be enlarge and trying to figure that out is not going to be very easy.

Clipping mask with white brush won't work

Hi, im using photoshop cs6 on a mac and when I do a clipping mask and click and try to use a white brush to show more of the mask it doesn't work, however when I use the black brush it does work

Clipping masks are a little different from, say, vector masks. They simply take into account the content in the base layer they're clipped to, whether they're black, white or any other color.
To reveal with white, you'd have to insert a vector mask on the base layer and work from there.
ON EDIT: This assumes you have more content in the base layer to work with, so scratch that. You're probably better off just using a vector mask and concealing/revealing that way.

Illustrator Clipping Mask

When I use the clipping mask, I later cannot recognise that there is one, as there is no 2nd box that appears like it did in previous Illustrator programs.
Is there a way to make it visible?

CS 4? I can still see the clipping mask in the Layers Panel list and edit it as usual.
>Is there a way to make it visible?
Work in Outline mode.
Edit: You aren't thinking of "Transparency Masks" are you? You can view a transparency mask by option-clicking the mask icon in the Transparency Panel.

Illustrator Clipping Masks Release Every time I open a file

This is a bug that's been in Illustrator since CS3. Fix it already. I duplicate a bunch of shapes with clipping masks in them, save the file, close it, reopen it, and all the masks have released. It's annoying and adding hours of frustration on to my projects. This has been an issue since CS3, and you've done little to fix it, apparently.

Nope, because a.) I work for a company that has an NDA, and b.) every time I do (when I am able), Adobe product support just blames everything except their software. Last time, it was my "computer can't tell the difference between 1's and 0's." Complete bullcrap.
This is not a new bug, and it's ridiculous that I have to post anything on here about it.

Illustrator clipping masks disappear in pdf from IDCS3

I just tried exporting a pdf from an InDesign CS3 document that contains an imported Illustrator-eps. In InDesign everything looks fine - but in the exported pdf some of the clipping masks (on tiff's) in the eps have disappeared.
I tried saving the Illustrator-eps as an Illustrator-pdf - now the exported pdf from IDCS3 is OK.
I tried switching to InDesign CS2 - keeping the old Illu-eps, and the exported pdf was OK.
Is there any way though that I can get IDCS3 to work with my old Illustrator-epses - so I don't have to open all of them and save as Illustrator-pdf? The idea of going back to IDCS2 isn't thrilling eather...

Is CS3 fully updated to 5.0.4? If so, and this is easily reproducible it
will never get fixed for CS3 so your workaround are all you have.
Bob

Zebra print - clipping mask help

I'm new to Illustrator and am having trouble getting a clipping mask to work the way I want it to. I have a zebra print pattern over the top of some lettering and I want to keep the shape of the lettering while incorporating the zebra print. See my screen shot. What steps do I need to take? I tried Pathfinder and Shape Modes, but they don't come out right.
All I want is to have the lettering incorporate the zebra print without having points outside the letter shape.
Adrian

There are several ways to do this. Two options are: pattern fill or a clipping mask.
Pattern fill
Create a pattern from your zebra pattern by:
1. Setting the pattern artwork in front of a rectangle that has no stroke or fill.
2. Select the pattern AND the rectangle and drag them into the Swatch panel. A "pattern fill" swatch will be added to the panel.
3. Select your text and assign the pattern fill to the text.
This should ideally be a "seamless" pattern. You can read about that in the online help.
NOTE: If your pattern contains only the black portion of the fill (the white area is blank), you can add a second fill attribute to the text by using the Attributes panel:
1. Select the text.
2. Go to the fly-out menu on the Attributes panel and select "new fill".
3. Drag the new fill below the "Characters" in the Attributes panel.
4. Assign any color to it.
Clipping Mask
1. Set your text above the pattern, in the artboard (no need to convert it to outlines).
2. Select text and pattern and choose Menu item: Object/Clipping Mask/Make (or Cmd-7, mac or Ctl-7 pc)
3. Reselect the text and assign it a new color (objects lose their color when converted to a clipping mask, but it can be reassigned).
Hope this helps.

Clipping mask making everything just disappear

I am trying to make a gear have that nice mettalic shine using the clipping mask, but everytime I make the command the whole thing just dissapears. I am using the pen tool to make 4 triangles with different shades of grey. I then group the triangles, put a radial blur on them and place them under the gear that I created. I select them all and do the clipping mask command, but instead of it being a gear with that radial shine, the whole thing disappears except for the outline of the triangle. HELP!!! I'M STUCK AND I'VE TRIED EVERYTHING (except the right thing)!!!

Usually when everything dispaears then what you intended to use for a clipping mask, is not what happened. Your top most object in the selection is used for the clipping mask.
I fill my clipping mask with a dummy color, to confirm I have my layering correct, the color goes away after the mask command. You can also clean up your document by putting only what you wnat to mask, along with the clipping mask on a new layer, then hit the round button after the layer name to select all in the layer, and mask.

Shape Builder tool not working on shapes in a clipping mask

Hello again,
Why is the Shape Builder Tool don't work on shapes inside a Clipping Mask? The Pathfinder does work but for the Shape Builder Tool: NADA!
Thank's for answering,
Lindberg

Hi,
Thank you for answering. No it will work correctly. The Pathfinder work inside a clipping path and in any situation but not the Shape Builder Tool. Unless this is normal, I think that the specialist at Adobe should have a look at this annoying behavior and try to release an upgrade with this behavior corrected in a near futur.
Thank’s again for answering,
Robert Marchand
[email protected] <mailto:[email protected]>
Le 8 avr. 2015 à 10:41AM, Larry G. Schneider <[email protected]> a écrit :
Shape Builder tool not working on shapes in a clipping mask
created by Larry G. Schneider <https://forums.adobe.com/people/LarryG.Schneider> in Illustrator - View the full discussion <https://forums.adobe.com/message/7418340#7418340>
If you release the Clipping Mask and try the Shape Builder tool then, does it still balk at making the shape?
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7418340#7418340 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7418340#7418340
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Illustrator by email <mailto:[email protected]m> or at Adobe Community <https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14&container=33 67>
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624 <https://forums.adobe.com/thread/1516624>.

Ive been trying for hours now but illustrator wont allow me to create clipping mask

I have created the attached logo wit the pen tool. I then cut the middle bit out using the shape builder tool.
I imported this onto a new document containing an image/object i want to clip it to . I select both go to object> make clipping mask.
Both objects suddenly go blank and i can see the no fill/ no stroke icons. If this doesnt happen then ai will plain and simply say "cannot make clipping mask".
This has been bothering me for a couple days now.
Anyone have any ideas?
Thanks in advance.

herms-ra.
You can do it in a quite different/similar way with Cliping masks, without or with the purple/flamelike/smoky coloured background.
Note: There was an error in the first suggestion in post #18: In Step 5) you should select C) (the purple/flamelike/smoky coloured background to cut from) instead of D) (the underlying texture of the dripping black parts), sorry, I just spotted it.
You may (reusing part of the first suggestion):
1) Go back to, or start anew with, the following basic parts (starting with this stacking order):
A) The Compound Path forming the inner dripping black part (in the A),
B) The Compound Path forming the outer dripping black parts,
C) The purple/flamelike/smoky coloured background to cut from,
D) The underlying texture of the dripping black parts,
E) The underlying texture of the inner letter parts;
2) Select A) and B) and copy them both at the very top of the stacking order, then release both Compound Paths and delete the inner path from A) and the outer path from B), then make them into a new Compound Path consisting of the inner letter shapes (you may use Pathfinder>Minus Front or Object>Compound Path>Make);
3) Move E) (the underlying texture of the inner letter parts) up just below the new Compound Path from 2), select both, and Object>Clipping Mask>Make, then hide;
4) Select A) (the Compound Path forming the inner dripping black part (in the A)) and B) (the Compound Path forming the outer dripping black parts) and Object>Compound Path>Make;
5) Select the combination from 4) and D) (the underlying texture of the dripping black parts) and Object>Clipping Mask>Make;
6) Show 3).
C) The purple/flamelike/smoky coloured backgroun, if you keep it, or any other background will will be visible wherever it is not covered.

Illustrator files from Bridge creates Clipping mask.

I would like to use Bridge as a library for my Illustrator files. Only when I pressed shift key when dragging a illustrator file into my (illustrator) document, he translate my Artboard into a clipping mask. Does anyone have a solution?
I'm working in Adobe Illustrator CS5. Thnk you.

@ Kurt & Monika, thank you for your help. Indeed, I see more advantages in the use of Bridge mainly because I have my files used in Illustrator and Photoshop.
Action button is an option, same as the "Edit Clipping Path" button at the top of the control bar. Open a file is also an option.
I was just wondering if I overlooked an option for better storage of my files. Thnk for youre time.

Illustrator - Pattern Swatch / Clipping mask issue

I'm currently working in Illustrator CS6. I'm creating pattern swatches and have successfully created 20 - but 4 are giving me the following issue.
When I drag the perfect swatch tile into swatches it appears as so instead of the perfect tile:
"New pattern swatch 3" has a white space on the right. Which sometimes when I create the swatch takes up half of the 'swatch.'
When I go to create a shape and apply the pattern, I am left with an empty box.
When I double click to adjust the pattern I get this dialog box:
When I go to adjust the bounding box, to see where my pattern is - this crazy mess happens:
Further investigation and deleting items to see whats happening:
Bits of my pattern appear, but not sure why the other bars are there.
I'm having this issue with four very different patterns. But I have also succesfully created more complicated ones. Not sure why this is happening.
Any help is greatly appreciated!

Hey everyone,
I am in the same version, same file. I have also tried starting from scratch in another file just to make sure. Same issue.
I have templates of what i want my patterns to be, so I have tried to make the patterns both ways. Starting from my original art - expanding all shapes and making them so they will tile perfectly.
1. with clipping mask. 2. released mask, and expanded shape. 3. perfect tile.
from scratch, made to tile perfectly.
Same issue for both:
To make sure it wasn't only this one I tried a different pattern that was giving me the same error before hand.
I tried with original art which didn't work, so I quickly recreated with squares. Same tile, one time it was empty producing same issue as above. And second time it did this:
1. What tile is supposed to look like 2. Tile applied to shape - but the pattern swatch icon is empty?
Maybe this is a program bug?

Automatically create clipping masks

Hello,
I was watching this amazing video -
https://www.youtube.com/watch?v=ebVFXphyJqw
- and I noticed, that flash has a feature, that seems to automatically create clipping masks.
She starts using these at 1:45. She draws blue paths and applies gradients to shapes that use the blue paths but also underlying art.
I haven't figured out a quick way in illustrator to do it like this. (Draw path - divide - livepaint - new fill can produce such results, but thats too complicated for quick shading...)
Also there is a feature right at the beginning, where she erases segments of circular paths. They are exactly cut at the intersection points. Of course there are scissors and snapping in AI, but that method flash seems to offer looks much more convenient.
Maybe those functions are burrowed in some side menus in AI... I mean, I have Flash CS6, but I feel much more comfortable in AI.
If you know these features, especially the auto clipping mask thing, please tell me
-Andrej

Wow, the draw inside mode was also new to me. So much to learn!
It's a pity that it does not create merged clipping groups when having two objects selected simultaneously upon entering drawing inside mode.
I have not figured out, how to use the shapebuilder tool with single paths yet.
But I did try out the Pathfinder's outline operation. It seems to give me the seperated strokes I demanded.
Thanks for your help again Monika.
-Andrej

Help with creating compound/Clipping Mask

Hello,
This is going to be quite hard to explain so bear with me!
I recently live traced a hand drawn pattern into illustrator pressing 'Ignore white', Underneath this I have a jpg with a texture I want to use. My aim is to cut out the shape of two letters into this pattern/texture.
My problem is that creating a compound mask on my pattern will not work because live trace has created a group with hundred of paths and compound paths from my live trace, is there anyway create a mask so that the pattern just shows up as the two letters and deletes everything around it?
I want to use this method because although I can cut the letters out of a white square covering everything in the background, the design is for a logo and I would like to export as a PNG with a transparent background.
I know there are often a few was to get a desired effect with illustrator but I just can't get my head around this one!
Thanks for any help,
Laltoofan4

Place the outline of the letters on top of the pattern. Select the pattern and the letters and choose Object > Clipping Mask > Make.

Copy object with clipping mask from illustrator to photoshop

I want to copy objects from illustrator to use in photoshop, but the eps file that i am working in has a clipping mask and when i attempt to copy objects in that file from illustrator 6 to photoshop 6, portions (in some cases) all of the object turns black or gray. I'm sure this is a simple noob error (hope my question is clear enough), and it's driving me nuts. I have searched for solutions using terms "clipping mask, black, copy, move, illustrator, photoshop, etc." and can't find any discussions on this topic. Can you please help?
Here are the print screens to show you what i get in ai and ps -
(see blue outlined oval object selected - opaque white gradient)
(when moved to ps, opaque whitish oval turns black)
I'm such a noob! Thanks in advance for your help!

You simply lose the blending modes and transparency settings because this stuff works differently in both programs. You will have to reinstate it manually e.g. if the white highlight is created usuing Add blending mode, you will ghave to use the same in PS...
Mylenium

Illustrator clipping mask creating white fill?!!!

Similar Messages

Maybe you are looking for